Silica fume Analysisresult 900 (%)920 (%)940 (%)970 (%) Sio289.0292.0994.896.77 K2o1.321.120.630.26 Na2o0.520.420.350.29 Ph value8.187.786.607.10 Loi 750f¦1.801.600.900.80 Moisture content (when bagged) 0.41 0.400.430.41 Coarse particles:·+45 micron 64.732.6 Specific surface area (b.E.T.)1 8 m2/g19 m2/g19 m2/g19 m2/g Bulk density(kg/m3) 200~350 (900u)200~350 (920u)200~350 (940u) 500~600 (900d)500~600 (920d)200~350 (940u) 800kg/jumbo bag, 20'fcl contains 16 tons.
Ferrosilicon� is an alloy of iron and silicon that is made by reducing silica in the presence of iron, and which plays an essential role in steelmaking. Silicon iron, also known as ferrosilicon, is a ferroalloy composed of iron and silicon, with a silicon content ranging from 15% to 90%. It is commonly used as a deoxidizer in steelmaking and as a reducing agent in ferroalloy production and the chemical industry. In the steelmaking industry, approximately 3-5 kg of 75% ferrosilicon is consumed to produce one ton of steel. Ferrosilicon can also be used as an alloying element additive, which is widely used in low alloy structural steel, spring steel, bearing steel, heat-resistant steel, and electrical silicon steel. Ferrosilicon is also used in the production of cast iron, as it helps to control the initial content of silicon in the melt, which is important for the microstructure and properties of the final product. Ferrosilicon cast magnesium is an alloy that contains magnesium and is used as a nodulizer in the production of ductile iron. It has a big mechanical strength, and the effect of deoxidization and desulfurization is strong. Modifiers are added to molten metal to change its properties, and ferrosilicon is one of the most commonly used modifiers in the production of cast iron. The material forming the base Ferrosilicon analysis ferrosilico cast magnesium and modifiers. The role of Ferrosilicon in Steelmaking: In steelmaking, Ferrosilicon is used for:
Ferro Silicon used quartz(or silica)as raw material is made by electric furnace, because silicon and oxygen are easily compound into SiO2, the Ferro Silicon is often used as deoxidizer in steeling. It also can be used as a suspended phase in the mineral processing industry and coating for welding electrodes in the electrode manufacturing. According to the content of Silicon, this product can be divided into FeSi with the Si content Application : 1. Ferrosilicon is often used as deoxidizer in steel- making. 2. Ferrosilicon also can be used as alloy elements join agent, which is widely used in low alloy steel, non-ferrous metal, bearing steel, heat-resistant steels and electrician silicon-steel. 3. It can be used as a reductant in ferroalloy production and chemical industry. 4. In iron industry it can be used as inoculant and nodulizer.
Elastosil Aux Primer G3243
Remelted Ferro Nickel ingot from NiMH battery. By product information which content around 4% of cobalt, 7-10% of earth rare metal ( lanthanum, cerium, neodymium, praseodymium). We sell base on analysis of the final product with big discount. Ingot size and shape follow buyer request.
Waermtimo carbon fiber thermal pad is made through advanced manufacturing process and with meeting the requirement of UL 94 V0 , RoHs and Reach compliance. This kind thermal pad are compatible with the flexibility and adhesion of polymers. Can cool CPU, GPU, high energy density LED and other high heat dissipation parts. It has the performance of high thermal conductivity and stability, non- tacky and good rebound for easy applicaiton. Function Easy to apply and re-work. High thermal conductivity Tightly integrate irregular or complex surfaces Flame retardant testing certification Typical application LED heatsink High-speed optical module Core router Industrial computer Aerospace aircraft tip heat conduction High power signal transmitter
Thermal gel is made of silicon resin as the base material, adding thermal conductive fillers and bonding materials in a certain proportion, and processed through a special process. It has excellent high and low temperature resistance, excellent weather resistance, radiation resistance and superior dielectric properties. Testing items Testing standard WT5921-35 Appearance Visual Blue Oil leakage(150*48H) N/A
Advantage of 156x156mm 200um High efficiency P Type polysilicon wafer Manufacturer The production process is simple, cost-effective, and reduces silicon waste High conversion efficiency, low fragmentation rate and low optical attenuation Manufacturing Specialization, Intelligence and Greening Customized products to meet customer needs Name: High efficiency polysilicon wafer Technology : Diamond wire cutting Type : P type Resistance:1~3μs minority carrier:>2 μs Hem width:157.00~157.25mm Thickness:200±20μm Transfer efficiency:>18.8%
Name: High efficiency polysilicon wafer Technology : Diamond wire cutting Type : P type Resistance:1~3μs minority carrier:>2 μs Hem width:157.00~157.25mm Thickness:200±20μm Transfer efficiency:>18.8% Advantage of Hot Sales A Grade polysilicon wafer The production process is simple, cost-effective, and reduces silicon waste High conversion efficiency, low fragmentation rate and low optical attenuation Manufacturing Specialization, Intelligence and Greening Customized products to meet customer needs Hengxing company website: https://hengxingsteelwire.com/ Email contact US:wmsale@hxkjgf.com
Name: High efficiency polysilicon wafer Technology : Diamond wire cutting Type : P type Resistance:1~3μs minority carrier:>2 μs Hem width:157.00~157.25mm Thickness:200±20μm Transfer efficiency:>18.8% Advantage of high quality High efficiency P Type polysilicon wafer The production process is simple, cost-effective, and reduces silicon waste High conversion efficiency, low fragmentation rate and low optical attenuation Manufacturing Specialization, Intelligence and Greening Customized products to meet customer needs Hengxing company website: https://hengxingsteelwire.com/ Email contact US:wmsale@hxkjgf.com
Description Excellent electrical insulating property One of the most popular and highly reliable zebra connector, the two sides are made of soft silicone material Electrically conductive, it can avoid the short-circuit when use the metal shell because of the sponge rubber insulators are more compressible Applications: Dot matrix lcd module, such as calculators, cars audio and toy, and others Designed to meet a higher requirement of lcd applications such as graphics lcd
Quick details Classification: chemical auxiliary agent Cas no.: 7631-86-9 Other names: silica gel powder Mf: sio2 Einecs no.: 231-545-4 Purity: 99% Place of origin: shandong, china (mainland) Type: adsorbent Adsorbent variety: silica gel Usage: coating auxiliary agents, petroleum additives, surfactants Brand name: bangkai Model number: industrial chemicals silica gel Raw material: silica gel Color: white Shape: powder Pore diameter: 60a Pore volume: 0.5-0.7ml/g Ph: negotiable Specific surface area: 450-600m2/g Loss on heating(150â??):
thermal conductive silicone pad is high-performance,thermal conductive gap filling materials, mainly for the transmission interface between the electronic equipment,and heat sink or product outer coving. With nice stickiness,flexibility, good compression performance and excellent heat conductivity,it make the products can discharge gas from the electronic original and heat sink, to achieve fully conforming and obviously cooling effect. 1. Grade: Food Grade insulator Silicone Rubber 2. Size: customized 3. Standard: LMS 4. Certification: ISO9001, SGS, CTI, ROHS Product Name: thermal conductive silicone pad Material: Silicone Rubber Color: Blue Size: Custom size, longth is 100m Thermal conductivity: 1.0~6.0w/mk Used: High Temperature and insulators Dielectric breakdown Voltage: >4KV Volume Receptivity:1.5*10^12O.cm Specific gravity: 2.3g/cm^2
Cas no: 7440-02-0 Eninec no: 231-853-9 Mf: ni Grade standard:industrial, reagent Purity:20nm 99.9%. 40nm, 70nm, 100nm 99.8% Appearance: black powder Application:catalyst Size: 20nm 40nm, 70nm, 100nm Shape:spherical Note: we can supply different size products of electrode materials nickel powder according to client's requirements. Product performance Nickel nanoparticles is a high-performance electrode materials in fuel cells which can replace the precious metals platinum, thus greatly reducing the cost of the fuel cell.
We supply #ferrosilicon at competitive prices. Si: 70-75 % Al: 1.2-2 % C: 0.15-0.2 % P: 0.05-0.04 % S: 0.05-0.03 % Size: 10-60 mm
Model Chemical Composition% Si Mg Ca Re Ba La Fe BN-126 38-44 6-7.5 1.0-3.0 1.8-2.5 - balance BN-127 38-44 6.3-7.5 2.0-3.5 2.5-4.0 1.2-2.0 balance BN-137 38-44 6.3-7.5 1.0-3.0 2.5-4.0 - balance BN-138 38-44 7.0-9.0 2.0-3.0 2.0-4.0 - balance BN-158 38-44 7.0-9.0 2.0-3.0 4.0-6.0 - balance BN-101 44-48 5.6-6.5 0.8-1.2 - ï¼?2.0 proper balance BN-104 44-48 5.5-6.5 1.0-1.5 0.4-0.6 proper balance Standard Size: 0.6-6mm,1-12mm,5-25mm,4-30mm Packing: 25kg woven plastic bag in 1mt jumbo bag. Note: Chemical composition, size and packing of above mentioned products can be adjusted according to customer's requirements. Characteristics 1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed. 2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products. 3.High mechanical strength and strong deoxygenation and desulfuration effects.
Model Chemical Composition% Si Mg Ca Re Ba La Fe BN-126 38-44 6-7.5 1.0-3.0 1.8-2.5 - balance BN-127 38-44 6.3-7.5 2.0-3.5 2.5-4.0 1.2-2.0 balance BN-137 38-44 6.3-7.5 1.0-3.0 2.5-4.0 - balance BN-138 38-44 7.0-9.0 2.0-3.0 2.0-4.0 - balance BN-158 38-44 7.0-9.0 2.0-3.0 4.0-6.0 - balance BN-101 44-48 5.6-6.5 0.8-1.2 - ï¼?2.0 proper balance BN-104 44-48 5.5-6.5 1.0-1.5 0.4-0.6 proper balance Standard Size: 0.6-6mm,1-12mm,5-25mm,4-30mm Packing: 25kg woven plastic bag in 1mt jumbo bag. Note: Chemical composition, size and packing of above mentioned products can be adjusted according to customer's requirements. Characteristics 1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed. 2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products. 3.High mechanical strength and strong deoxygenation and desulfuration effects.
Characteristics 1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed. 2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products. 3.High mechanical strength and strong deoxygenation and desulfuration effects.
Features Thermal conductivity 3.0W/(m.K), flammability UL 94-V0 Excellent electrical insulation, bonding strength13 Mpa Application temperature: -45~123, Short term: 225 Fast cure with additional heat Applications EV Battery pack; Aerospace equipments; Semiconductor, LED TV; Between any heat source and a heat sink; XK-D30L is a two-part thermally conductive adhesive, combining features of thermally conductive, electrical insulation,semi-rigid bonding and sealing. It is ease of use, long service life, suitable for automated dispensing system to improve productivity and bonding effect. XK-D25 is designed for strong bonding of metals or plastics. Better effects can be achieved when it is used together with GLPOLY bonding adjuvants. Description GLPOLY Thermally Conductive Structural Adhesives Are Designed For CTP Battery Cell Bond. Ive sorted out the materials of new energy EV CTP battery pack and found that the items concerned most by engineers were thermally conductivity, tensile strength, shear bonding strength, hardness, elongation and shelf life etc,  in addition, the fluency of dispense and fluidity of material were concerned too. The design requirements of each customer are dissimilar, but it does not matter, GLPOLY is confident of providing customized service for customers. 1. Has no equals in features of bonding strength, roughness, thermally conductive and electrical insulation; 2. Bonding strength is 30% higher than that of competitive products, withstanding impact of 12m freefall superimposing speed of 120km/h ; 3. Eliminates the need of mechanical fasten, increasing volume by 20%, reducing components by 40%, improving productivity by 50%, competitive products cant achieve these objectives; 4. Withstands 2500V at 0.28mm thick; dielectric strength is up to 14kV/mm, 40% higher than competitive products; 5. Performance degradation is less than 5% at 85 Celsius degree, RH85 for 1000 hours, and performance of PU deceases by 40% for 500 hours; 6. 25-year service life, three times longer that that competitive products; 7. Flammability UL94 V-0, when it leaves fire, it goes out; some competitive products would be burned out; 8. Cures for 13 hours at room temperature, two times faster than that of competitive products; 9. Application temperature: -45~175, short term: 250, 15% higher than that of competitive products; GLPOLY thermally conductive structural adhesive is designed for CTP battery cell bond, providing 8MPa bonding strength, and compatible with automated dispense processes.
The material is heat reinforced polymer, designed to meet the Thermal conductivity and reliability demand for the thermal conductivity of high application terminal. In addition, the heat sinks performance benefits a lot from the low heat resistance. And improve the microprocessor, DC - DC converter of memory module and the reliability of power module. The phase change characteristics: the material is solid in room temperature and installation is completely convenient, used between heatsink and devices. The material can be softened and flowing when the products reach phase-change temperature to fill the devices tiny irregular contact surface. Thus, the material has the ability to fill the gap between the devices and heat sink completely, make the phase change better than non-current elastomers or thermal graphite pad and get the performance of thermal conductive silicon grease. The material is nonconductive, however, as the material has endured the phase change at high temperature, may make the metal get to the metal, so the phase change interface material cannot Features & Benefits: Low heat resistance and low stress Natural sticky, easy to use-no need to use glue No radiator preheating Flow but not silicon oil Low volatility--less than 1%
