Description Two component Epoxy based anti corrosive primer pigmented with Zinc Chromate as corrosion inhibiting pigments. Recommended Use :- It is recommended as primer on M.S surface for original equipment manufacturing as well as for process industry as in various fertilizer, refineries, petrochemical, chemical and other plants, applied in diverse areas of tank exteriors, equipments, pipelines, structural steel, etc. Not to be used for immersion application. Physical Data COLOUR : Assorted FINISH : Matt SOLIDS BY VOLUME : 40 ± 3% THEORETICAL SPREADING RATE : 13.33 sq.mt. / ltr. at recommended DFT of 30 �µ FLASH POINT : Base : Above 23�°C Hardener : Above 23�°C DRYING CHARACTERISTICS : SURFACE DRY : 60 90 minutes (At 65% Relative Humidity & at 30�°C) : HARD DRY : Overnight FULL CURE : 7 days SHELF LIFE : BASE : 6 months HARDENER : 6 months Surface Preparation Abrasive blasting to Sa 21/2 Swedish Standards is the best method of surface preparation. In case blasting is not possible, then the surface of steel should be cleaned to St-2/St-3 std. The surface should be absolutely dry, moisture and oil free before primer application. Application Data MIXING RATIO : Base : Hardener (As per our recommendations) APPLICATION : By Brush / By Conventional Spray THINNER : Epoxy thinner 190 POT LIFE : 4 hours min at 30 C RECOMMENDED DFT : 30 - 40 au. OVERCOATING INTERVAL : MIN : 8 hours MAX : 24 hours COMPATIBILITY : Can be over coated with Epoxy, PU, Chlorinated rubber and Oleo-resinous topcoats. Application Method Stir the Base part thoroughly. Mix the base and hardener as per our recommended ratio, by volume. Stir the mix gently to attain homogeneity. Allow the mixture to stand still (maturation) for about 10-15 minutes to initiate the reaction. Add Epoxy Thinner into the mix, if required, depending on application method, and stir gently for few minutes. Strain the paint through Nylon filter cloth of 100 mesh size and apply uniformly over the surface. All equipments used for above should be properly cleaned. Application :- By Brush / By Conventional Spray / By Airless Spray Generally no thinner is required for Brush application, however under adverse environmental conditions about 5% of thinner, by volume, can be added. Apply evenly in criss-cross manner and ensure the uniform application. Use quality brushes for paint application For Conventional Spray application :- Thinner : Epoxy Thinner 190 Addition : 10-15% Nozzle Orifice : 1.2 -1.4 mm Nozzle Pressure : 40-70 psi For Airless Spray application :- Thinner : Epoxy Thinner 190 Addition : 10-15% Addition : Max 5% if required Nozzle Orifice : 0.37- 0.42mm Nozzle Pressure : 1400-1800 psi
Description Two component Epoxy based anti corrosive primer containing red oxide and zinc chromate as corrosion inhibiting pigments Recommended Use :- Recommended as a primer on suitably cleaned mild steel surface in various fertilizer units, refineries, chemical and other plants, transportation industries, steel plants, cement plants, power plants, pulp and paper industries, pharmaceutical industries, etc. for application on tank exteriors, structural steel, pipelines, machineries, vessels, etc. The product is recommended as a primer for mild to moderate service conditions. Not to be recommended for immersed water condition Physical Data COLOUR : Red FINISH : Matt SOLIDS BY VOLUME : 40 + 3% THEORETICAL SPREADING RATE : 13.33 sq.mt / lt at recommended DFT of 30 FLASH POINT : Base : Above 23C Hardener : Above 23C DRYING CHARACTERISTICS (At 65% Relative Humidity & at 30C) : SURFACE DRY : 60 - 90 minutes HARD DRY : Overnight FULL CURE : 7 days SHELF LIFE : BASE : 6 months HARDENER : 6 months Surface Preparation Abrasive blasting to Sa 21/2 Swedish Standards is the best method of surface preparation. In case blasting is not possible, then the surface of steel should be cleaned to St-2/St-3 std. The surface should be absolutely dry, moisture and oil free before primer application Application Data :- MIXING RATIO : Base : Hardener (As per our recommendations) APPLICATION : By Brush / By Conventional Spray / By Airless Spray THINNER : Epoxy Thinner 190 POT LIFE at 30�°C : 4 hours min at 30�°C RECOMMENDED DFT : 30 40 �µ. OVERCOATING INTERVAL : MIN : 8 hours MAX : 24 hours COMPATIBILITY : Can be over coated with Epoxy, PU, Chlorinated Rubber and Synthetic Enamel finish paints. Application Method Stir the Base part thoroughly. Mix the base and hardener as per our recommended ratio, by volume. Stir the mix gently to attain homogeneity. Allow the mixture to stand still (maturation) for about 10-15 minutes to initiate the reaction. Add Epoxy Thinner into the mix, if required, depending on application method, and stir gently for few minutes. Strain the Application : By Brush / By Conventional Spray / By Airless Spray Generally no thinner is required for Brush application; however under adverse environmental conditions about 5% of thinner, by volume, can be added. Apply evenly in crossed manner, ensuring the uniform application. Use quality brushes for paint application. For Conventional Spray application :- Thinner : Epoxy Thinner 190 Addition : 10-15% Nozzle Orifice : 1.2 -1.4 mm Nozzle Pressure : 40-70 p.s.i. For Airless Spray application :- Thinner : Epoxy Thinner 190 Addition : Max 5% if required Nozzle Orifice: 0.37- 0.42mm Nozzle Pressure : 1400-1800 p.s.i.
Description Two component Epoxy based anti corrosive primer containing zinc phosphate as corrosion inhibiting pigments Recommended Use :- It is recommended as primer on M.S surface for OEM's as well as for process industries like fertilizers, refineries, chemicals and other plants. It can also be applied in diverse areas of tank exteriors, equipments, pipelines, structural steel, etc. Not to be used for immersion application. Physical Data :- COLOUR :- Yellow FINISH :- Matt SOLIDS BY VOLUME :- 40 �± 3% THEORETICAL SPREADING RATE :- 13.33 sq.mt. / ltr. at recommended DFT of 30 �µ FLASH POINT :- Base : 23�°C Hardener : 23�°C DRYING CHARACTERISTICS :- SURFACE DRY : 60 to 90 minutes (At 30�°C & 65% Relative Humidity) :- HARD DRY : Overnight. FULL CURE : 7 Days SHELF LIFE :- BASE : 6 months HARDENER : 6 months SURFACE PREPARATION Abrasive blasting to Sa 21/2 Swedish Standards is the best method of surface preparation. In case blasting is not possible, then the surface of steel should be cleaned to St-2/St-3 std. The surface should be absolutely dry, moisture and oil free before primer application Application Data MIXING RATIO :- Base : Hardener (As per our recommendation) APPLICATION :- By Brush / By Conventional Spray / By Airless Spray THINNER :- Epoxy Thinner 190 POT LIFE :- 4 hours min at 30�°C RECOMMENDED DFT :- 30 - 40 �µ. OVERCOATING INTERVAL :- MIN : 8 Hours MAX : 24 Hours COMPATIBILITY :- Can be over coated with Epoxy, PU, Chlorinated rubber and Oleo-resinous topcoats. Application Method Stir the Base part thoroughly. Mix the base and hardener as per our recommended ratio, by volume. Stir the mix gently to attain homogeneity. Allow the mixture to stand still (maturation) for about 10-15 minutes to initiate the reaction. Add Epoxy Thinner into the mix, if required, depending on application method, and stir gently for few minutes. Strain the paint through Nylon filter cloth and apply uniformly over the surface. All equipments used for above should be properly cleaned. Application : By Brush / By Conventional Spray / By Airless Spray Generally no thinner is required for Brush application; however under adverse environmental conditions about 5% of thinner, by volume, can be added. . Apply evenly in crossed manner, ensuring the uniform application. Use quality brushes for paint application. For Conventional Spray application:- Thinner : Epoxy Thinner 190 Addition : 10-15% Nozzle Orifice : 1.2 1.4 mm Nozzle Pressure : 40 - 70 p.s.i. For Airless Spray Application:- Thinner : Epoxy Thinner 190 Addition : Max 5% Nozzle Orifice : 0.37- 0.42mm Nozzle Pressure : 1400-1800 p.s.i.
OCTOPLUS FRP TOOL dongle allows you to reset Google Factory Reset Protection FRP for Samsung Huawei LG Alcatel Motorola cell phones Samsung Reset FRP operations 1 Reset FRP UART UFS chips operation This operation will not resetdelete device user data To perform Reset FRP UART UFS chips operation do the following steps Put the phone in Download Mode power off the phone press and hold Volume Home Power ON buttons and connect USB cable Press Reset FRP UART UFS chips button After Software request disconnect USB cable and connect Samsung Micro UART cable Press and hold Volume Power ON keys for 1520 seconds Software will automatically close wizard window and will perform the reset FRP lock Done 2 Reset FRP ADB Combination operation This operation will not resetdelete device user data To Reset FRP lock using combination firmware you can try to do the following I Write bootimg partition from appropriate Combination firmware Perform Reset FRP ADB Combination operation in the software II Write full Combination firmware Go to Developer Options in the phones Settings Check Enable OEM unlock option Perform Factory Data Reset Reflash the phone with full stock original firmware Note bootimg from combination firmware can be not compatible with current phones firmware In that case phone will freeze on logo or will be rebooting after writing of such boot To restore the phone to its initial condition you need to reflash it with different full stock original firmware or try to write only boot of such firmware Also note You can write bootimg combination firmware or downgrade phones firmware version only at your own risk PS If you cannot find combination firmware for your model in SAMSUNGCOMBINATION folder in Support Area this means we dont have these files at the moment As soon as we get new combination firmwares we will upload them into the Support Area 3 Reset FRP Download Mode operation Be careful performing this operation will delete all user data contacts pictures and other from the device To perform Reset FRP Download Mode operation do the next steps 1 Click Reset FRP Download Mode button 2 Put phone in Download Mode power off the phone press and hold Volume Home Power ON buttons 3 Connect the phone to PC via Micro USB cable 4 Follow Software instructions prompts 4 Reset FRP UART eMMC chips operation This operation will not resetdelete user data on the device
Original ICFRIEND Mipi Nb Max box + UFS 4 in 1 Socket UFS BGA 153,UFS 254,UFS 297 Adapter + E-MATE eMMC 13 in 1 Adapter. MiPi NB-Max is a tool intended for reading and writing user data on UFS and eMMC chips. ICFRIEND MiPi NB-MAX eMMC UFS CHIP PROGRAMMER + MIPITESTER + BGA SOCKET ADAPTERS ICFRIEND MiPi NB-MAX Box is compatible with the following models of Cell phones: LG/Samsung/Huawei/ZTE/Lenovo/Oppo/Vivo Features: Read / Write eMMC and UFS memory chips Supports ISP (In-System Programming) UFS / UMCP / ISP - Data transfer speed UFS/UMCP UFS 2.0 / 2.1 / 3.0 / 3.1 supported HS-G2 high speed mode 80-130 MB/s (writing) / 100-180 MB/s (reading) for 100 MB higher speed you need to use USB 3.0 + high speed SSD UFS ISP Flying Line Mode PWM-G1 6-15MB/s (reading / writing) EMMC/EMCP - Data transfer speed EMMC 4.5 / 5.0 / 5.1 supported HS200 80-120MB/s (write) / 120MB/s (read) EMMC ISP 5-15MB/s (read / write) Upgrade NAND / PCIE / NVME / NOR / SPI / I2C Flash Supports UFS/UMCP dedicated descriptors, attributes, flags and other chip initialization and advanced settings LUN cutting Read / Write / Specify boot area Read / Write EMMC/EMCP User Area and BOOT1/2 Read / Write advanced RPMB, GPP Enhanced Area settings Voltage output (VCC, VCCQ) 1.1 V - 3.3 V + intelligent short circuit protection Supported BGA: UFS BGA 254 UFS BGA 153 eMMC BGA 153-169 eMMC BGA 254 eMMC BGA 221 eMMC BGA 162-186 Package Content: 1x MiPi Tester Box 1x ISP Adapter 1x USB 3.0 Cable 1x USB 5V Cable NB-EMMC-BGA 13 in 1 set: eMMC-BGA221 eMMC-BGA529 eMMC-BGA162-186 eMMC-BGA136 eMMC-BGA168 eMMC-BGA153 eMMC-BGA169 eMMC-BGA100 eMCP-BGA254 eMCP-BGA186 eMCP-BGA136 eMCP-BGA529 eMCP-BGA168 NB-HS-BGA 4 in 1 set: UFS-BGA-297 UFS-eMMC-BGA254 UFS-153 1x EMMC UFS P1 Adapter
Details of ingersoll-rand oil air separator 39831920 1.Filtering precision:0.1 Micron . 2.Oil contained in compressed is below 3ppM. 3.Filtration efficiency:99.99%. 4.Service life is approximately 3500h-6000h. 5.Initial pressure differential less than 0.02Mpa. 6.Filter element of air oil separator is made by the thin fiberglass,which imported from HV&Lydall company. 7.Packaging Details:Carton case or according to customer's requirements 8.Delivery Detail: stock or Shipped in 7 days after payment Ingersoll Rand air inlet filter 85565547 85565554 85565562 85565570 85565588 85565596 85565604 85565612 85565620 85565638 85565646 85565653 85565661 85565679 85565687 85565696 85565703 85565711 85565729 85565737 85565745 85565752 85565760 85565778 85565786 85565794 85565802 85565810 85565828 85565836 85565844 85565851 85565869 85565877 85565885 85565893 85565901 85565919 85565927 85565935 85565943 85565950 85565968 85565976 85565984 85565992 85566008 85566016 85566214 85566230 85566255 85566271 85566248 85566222 85566263 85566289 88342977 88343009 88343066 88343033 88342985 88343017 88343074 88343041 88342993 88343025 88343082 88343058 88343124 88343157 88343215 88343181 88343132 88343165 88343223 88343199 88343140 88343173 88343231 88343207 88344239 88344247 88344261 88344254 88343272 88343306 88343363 88343330 88343280 88343314 88343371 88343348 88343298 88343322 88343389 88343355 88343421 88343454 88343512 88343488 88343439 88343462 88343520 88343496 88343447 88343470 88343538 88343504 Xinxiang Lifeierte Filter Corp.,Ltd (Stock code:837936)is specialized in manufacture of filters ,filter equipment,and environment system . Located in Xinxiang City-the center of Filtration in China.Lefilter has superior R & D team, professional technical team,experienced overseas sales team and perfect after-sales service system.We Lefilter people will try our best to satisfy customers' requirements.The develop philosophy of LEFILTER is "To purify environment,To serve society,To manage faithfully and To oyrsye excellence"!What's more,there're advanced production line,test machine and R & D department.They also obtained certification like ISO9001, IQNet & CQM,SGS,CNEX etc. Main Products National Standard Filters Series Replacement Filter Element Series Air Compressor Filter Series Precision Filter Element Series Air Filter Series Water Filter Series Filter Machine Series Wedge Wire Filter Series
the paying buyer's letterhead, with Target Price, Payment method, with Top 50 bank data, company CIS, copy of the passport attached to the LOI, signature and stamp, dated. PROCEDURES: 1. The buyer issues an ICPO with company registration, including a copy of the buyer's passport. 2. The seller issues the draft contract (SPA) to the buyer; Buyer and Seller review and sign the mutually accepted and Buyer RETURNS TO SELLER WITH MT799 via swift to Seller's bank. 3. The seller submits the signed contract to the government ministry for registration, legalization and notarization at the seller's expense. 4. Seller issues Buyer the soft performance warranty P P O P documents listed below: Product supply commitment letter Product availability letter Certificate of origin Product passport Notice of readiness 5. The BUYER's bank ISSUES the bank instrument via SBLC MT760 for the amount of the first remittance to the Seller's bank coordinates, within seven (7) working days after the buyer receives the final approved contract in PDF format with PPOP to allow that the seller initiates procedures with the transport company and releases the complete set of POP documents. 6. Seller pays all intermediaries involved in the transaction as per signed NCNDA/IMFPA within 72 hours. 7. Thereafter, monthly shipment continues in accordance with the signed SPA and payment for the product will be made upon successful SGS/CIQ or equivalent inspection via TT/ 103. 8. After successful SGS/CIQ inspection by the buyer, the product is unloaded at the buyer's storage facility. The buyer's bank releases the full payment amount for the product or the balance payment via MT03/TT in USD or equivalent and title to the product transferred to the buyer. Note: If the buyer does not issue the bank instrument within seven (7) working days, alternatively, the buyer pays via MT103/TT USD 475,000.00 or equivalent in EURO/RMB as execution of provisional guarantee within 72 hours and the amount will be deducted from the product's face value when final payment is made. 9. Within 5 working days after the seller's bank receives the buyer's bank instrument, the seller's bank issues 2% PB to the buyer's bank account, which is detailed and mutually agreed upon in the signed contract. (Note: 2% PB will not be issued by seller for $475,000 Alternate Provisional Warranty Performance Payment) 10. Upon successful receipt by the seller's bank of the non-banking instrument and receipt by the buyer of 2% PB from the seller's bank or, alternatively, upon receipt of payment MT103/TT of USD 475,000.00 by the seller's bank , the seller starts loading the product within 7 days and issues completed POP/Shipping documents. 11. The shipment begins as provided for in the contract and upon arrival of the cargo at the unloading port, the buyer's inspection team performs SGS/CIO or Equivalent Inspection to verify the quality and quantity of the product.
White Super-High Strength Fast Setting Rapid Hardening High Belite Sulpho Aluminate Cement These are white hydraulic binders (referred to as white super-high strength double-fast cement)with super-high strength, fast setting and rapid hardening properties, made from active (or inactive) mixed materials such as fast setting rapid hardening high belite sulpho aluminate cement clinker with low content of ferric oxide, moderate amount of gypsum (or industrial by-product gypsum), slag and other active (or inactive) hybrid materials with fine grinding, and the code is BS - WSF. Specification item value Warranty 1 Year After-sale Service Online technical support Project Solution Capability Others Application construction Design Style Contemporary Model Number White Super-High Strength Fast Setting Rapid Hardening High Belite Sulpho Aluminate Cement Feature Decorative Type Calcium sulfoaluminate cement Hardening Feature Extra Rapid Hardening Heat of Hydration Low-Heat Strength Grade(Mpa) 42.5 INITIAL SETTING TIME 15mins FINAL SETTING TIME 45mins Technical Data: Physical Properties: Advantages: 1/ Fast setting, Rapid hardening, high strength; 4h compressive strength can reach 15Mpa, 102Mpa after 28d, suitable to make the high strength products. 2/ Micro expansion, low dry shrinkage, the length change is very small. Dry shrinkage rate is just 1/8 of Portland cement. 3/ Have very good anti-corrosion property in sulfate, chloride, magnesium salt and seawater. Corrosion resistance coefficient 1. 4/ High impermeability, permeation height is 1/5 of Portland cement. 5/ High frozen resistance property, can get the strength of critical intensity of cold in 2h 3h. 6/ Low hydration heat release 7/ PH value is under 10.0 for GRC products. 8/ High whiteness value, the Hunter whiteness is above 75. 9/ Re-alkali resistant performance is good 10/ Can be mixed with Portland cement in a proper ratio, can greatly reduce the shrinkage of Portland cement, reduce the cracks. Application area: 1/GRC 2/Decoration mortar 3/Interior and exterior wall putty 4/Artificial stone and floor 5/Decorative concrete 6/Building reinforcement 7/ HPC and RPC 8/Rush projects and constructions, projects in winter. 9/ High early strength Non-shrinkage grouts
We are the world's top supplier of V-belts. Our main products are V-ribbed belts, automotive timing belts, industrial timing belts, V-belts, toothed belts, etc. Splicing Machine Generally, only one layer of original rubber is used in the production of products, but our products are spliced together with 4 layers of original rubber, and the products produced have a longer life and are more wear-resistant Grinding Machine After the product is initially formed, in order to ensure uniform thickness of the V-belt, uneven parts of the V-belt will be polished off Our Advantage -- We are a factory, so the price is cheap -- Samples are free -- The production adopts new technology and has a longer life -- We will reply to your inquiry within 1 hour -- We can provide the best-selling sizes and models in the local market -- Complete models, fast delivery PRODUCT FEATURES -- Excellent flexibility and high transmission efficiency -- Power transmission belt with multiple longitudinal ribs. -- Torque is transmitted through the contact of the side of the belt rib and the groove of the pulley.� -- Compared with V-belts, it has a larger contact surface area. -- High grade engineered rubber,longer service life. -- Temperature range from -50â?? to +120â?? -- Oil, heat,ozone and abrasion resistant FAQ Q1:Can i order a small quantity of samples? ---- Yes. We can offer you samples at the bulk prices and send them by DHL, TNT. EMS, FEDEX or others according to your requirements. Q2: How could i know whether the belt fits for my machine? ---- You can tell me which product you are interested in, and i will give you its main sizes. You can also send me drawings or samples, and then we will put them into production at your requests. Q3: I want to find a supplier for my new products. Can you help me? ---- Yes. Kindly offer me your drawings or samples for analysis. Q4: How long does it take to make a new product? ---- Usually 10-15 days for drawings and 7 days for samples. Q5: Can we stencil (or print ) our logo or company name on the belt or package? ---- Yes. Please inform us your logo or design before mass production. Q6: What is your payment term? ---- T/T 30% deposit and T/T 70% balance before shipment. Q7: What is your quotation? ---- We will give you FOB price. But EXW, CIF and CNF can also be given according to your demands.
We are the world's top supplier of V-belts. Our main products are V-ribbed belts, automotive timing belts, industrial timing belts, V-belts, toothed belts, etc. Splicing Machine Generally, only one layer of original rubber is used in the production of products, but our products are spliced together with 4 layers of original rubber, and the products produced have a longer life and are more wear-resistant Grinding Machine After the product is initially formed, in order to ensure uniform thickness of the V-belt, uneven parts of the V-belt will be polished off Our Advantage -- We are a factory, so the price is cheap -- Samples are free -- The production adopts new technology and has a longer life -- We will reply to your inquiry within 1 hour -- We can provide the best-selling sizes and models in the local market -- Complete models, fast delivery PRODUCT FEATURES -- Excellent flexibility and high transmission efficiency -- Power transmission belt with multiple longitudinal ribs. -- Torque is transmitted through the contact of the side of the belt rib and the groove of the pulley.� -- Compared with V-belts, it has a larger contact surface area. -- High grade engineered rubber,longer service life. -- Temperature range from -50â?? to +120â?? -- Oil, heat,ozone and abrasion resistant FAQ Q1:Can i order a small quantity of samples? ---- Yes. We can offer you samples at the bulk prices and send them by DHL, TNT. EMS, FEDEX or others according to your requirements. Q2: How could i know whether the belt fits for my machine? ---- You can tell me which product you are interested in, and i will give you its main sizes. You can also send me drawings or samples, and then we will put them into production at your requests. Q3: I want to find a supplier for my new products. Can you help me? ---- Yes. Kindly offer me your drawings or samples for analysis. Q4: How long does it take to make a new product? ---- Usually 10-15 days for drawings and 7 days for samples. Q5: Can we stencil (or print ) our logo or company name on the belt or package? ---- Yes. Please inform us your logo or design before mass production. Q6: What is your payment term? ---- T/T 30% deposit and T/T 70% balance before shipment. Q7: What is your quotation? ---- We will give you FOB price. But EXW, CIF and CNF can also be given according to your demands.
We are the world's top supplier of V-belts. Our main products are V-ribbed belts, automotive timing belts, industrial timing belts, V-belts, toothed belts, etc. Splicing Machine Generally, only one layer of original rubber is used in the production of products, but our products are spliced together with 4 layers of original rubber, and the products produced have a longer life and are more wear-resistant Grinding Machine After the product is initially formed, in order to ensure uniform thickness of the V-belt, uneven parts of the V-belt will be polished off Our Advantage -- We are a factory, so the price is cheap -- Samples are free -- The production adopts new technology and has a longer life -- We will reply to your inquiry within 1 hour -- We can provide the best-selling sizes and models in the local market -- Complete models, fast delivery PRODUCT FEATURES -- Excellent flexibility and high transmission efficiency -- Power transmission belt with multiple longitudinal ribs. -- Torque is transmitted through the contact of the side of the belt rib and the groove of the pulley.� -- Compared with V-belts, it has a larger contact surface area. -- High grade engineered rubber,longer service life. -- Temperature range from -50â?? to +120â?? -- Oil, heat,ozone and abrasion resistant FAQ Q1:Can i order a small quantity of samples? ---- Yes. We can offer you samples at the bulk prices and send them by DHL, TNT. EMS, FEDEX or others according to your requirements. Q2: How could i know whether the belt fits for my machine? ---- You can tell me which product you are interested in, and i will give you its main sizes. You can also send me drawings or samples, and then we will put them into production at your requests. Q3: I want to find a supplier for my new products. Can you help me? ---- Yes. Kindly offer me your drawings or samples for analysis. Q4: How long does it take to make a new product? ---- Usually 10-15 days for drawings and 7 days for samples. Q5: Can we stencil (or print ) our logo or company name on the belt or package? ---- Yes. Please inform us your logo or design before mass production. Q6: What is your payment term? ---- T/T 30% deposit and T/T 70% balance before shipment. Q7: What is your quotation? ---- We will give you FOB price. But EXW, CIF and CNF can also be given according to your demands.
We are the world's top supplier of V-belts. Our main products are V-ribbed belts, automotive timing belts, industrial timing belts, V-belts, toothed belts, etc. Splicing Machine Generally, only one layer of original rubber is used in the production of products, but our products are spliced together with 4 layers of original rubber, and the products produced have a longer life and are more wear-resistant Grinding Machine After the product is initially formed, in order to ensure uniform thickness of the V-belt, uneven parts of the V-belt will be polished off Our Advantage -- We are a factory, so the price is cheap -- Samples are free -- The production adopts new technology and has a longer life -- We will reply to your inquiry within 1 hour -- We can provide the best-selling sizes and models in the local market -- Complete models, fast delivery PRODUCT FEATURES -- Excellent flexibility and high transmission efficiency -- Power transmission belt with multiple longitudinal ribs. -- Torque is transmitted through the contact of the side of the belt rib and the groove of the pulley.� -- Compared with V-belts, it has a larger contact surface area. -- High grade engineered rubber,longer service life. -- Temperature range from -50â?? to +120â?? -- Oil, heat,ozone and abrasion resistant FAQ Q1:Can i order a small quantity of samples? ---- Yes. We can offer you samples at the bulk prices and send them by DHL, TNT. EMS, FEDEX or others according to your requirements. Q2: How could i know whether the belt fits for my machine? ---- You can tell me which product you are interested in, and i will give you its main sizes. You can also send me drawings or samples, and then we will put them into production at your requests. Q3: I want to find a supplier for my new products. Can you help me? ---- Yes. Kindly offer me your drawings or samples for analysis. Q4: How long does it take to make a new product? ---- Usually 10-15 days for drawings and 7 days for samples. Q5: Can we stencil (or print ) our logo or company name on the belt or package? ---- Yes. Please inform us your logo or design before mass production. Q6: What is your payment term? ---- T/T 30% deposit and T/T 70% balance before shipment. Q7: What is your quotation? ---- We will give you FOB price. But EXW, CIF and CNF can also be given according to your demands.
The raw material of the porous titanium plate for hydrogen production by PEM water electrolysis is pure titanium powder, which is formed by pressing the mold and sintered at high temperature in vacuum. Hydrogen production by water electrolysis is a new energy pillar sunrise industry. The micropore diameter of the porous titanium plate is used to fully react with the medium to produce hydrogen energy. The surface is coated to prevent oxidation and increase the efficiency of hydrogen production. Porous titanium plates are widely used in hydrogen energy, petrochemical, and pharmaceutical filtration, with obvious advantages, and are indispensable products. Product Parameters Filtration accuracy: 0.5um-50um Porosity: 30-40% Permeability: 3-800m3/m2hkPa Compressive strength: 2-3Mpa Temperature resistance: 300 Maximum working pressure difference: 0.6Mpa Features 1. Strong temperature resistance, typical application at temperatures below 300 C;High filtration precision, stable pores, can effectively remove suspended solids and particles, etc., and the purification effect is good; 2. Good air permeability and low pressure loss. High porosity, uniform pore size, low initial resistance; 3. Easy to blow back, can be regenerated online, easy to clean, strong regeneration ability, long service life; 4. High mechanical strength, good rigidity, good plasticity, no need for additional skeleton support protection, easy to install and use; 5. Easy maintenance, good assembly, can be welded, bonded and machined; 6. Uniform pores, especially suitable for occasions requiring high uniformity such as fluid distribution and homogenization treatment; 7. Good corrosion resistance, can be used in nitric acid, sulfuric acid, acetic acid, oxalic acid, phosphoric acid, 5% hydrochloric acid, molten sodium. Stable use in liquid hydrogen, liquid nitrogen, hydrogen sulfide, acetylene, water vapor, hydrogen, carbon dioxide gas and other environments. Applications The porous titanium plate is used as the GDL (gas diffusion layer) of the anode for hydrogen production by water electrolysis in PEM water electrolysis. The pores are uniform and the porosity can be controlled at 30%-40%. Good electrical conductivity and strong corrosion resistance. It can be coated with platinum group metals to enhance its catalytic performance. The cost is relatively high, but the hydrogen production efficiency is high and the purity is high, which is suitable for industrial hydrogen production. Every kind of filter material will be blocked, so it is very important to choose the pore size. If you choose the right pore size, you will have a good filtration efficiency, and the blocking situation will be alleviated. If the blockage is serious, regular replacement can solve this problem.
Control Panel for AMF In the event of a substantial loss of mains power or a complete blackout, automatic transfer switch (ATS) panels, also known as automatic mains failure (AMF) panels, convert the power to emergency standby generators. Without AMF panels, generators must be manually operated, which may result in lost data, possible electrical equipment damage, and significant interruption. AMF and ATS panels keep an eye on the incoming AC mains supply, turn on the backup generator when the mains go out, and shift the building's load automatically from the mains to the generator. The AMF panel regulates a restoration to the mains supply when the mains supply is restored and turns off the generator after a proper cooling cycle. In order to prevent a complete blackout, AMF Control Panel is utilised in conjunction with the generator sets. They initiate a switchover to standby generators to prevent any blackout conditions. The generators must be operated manually if they are not used. They are frequently utilised in many industries that require a constant supply of power. We employed graded raw components for creating our items because we are renowned Automated AMF Control Panel Manufacturers. They are outfitted with contemporary technologies to provide accurate and dependable operation. Our items have also been put through testing by the quality maintenance cell to ensure they meet international quality standards. Being a top supplier and exporter, we are able to satisfy the needs of both domestic and foreign customers. We promise to accommodate your requests within the allotted time. Furthermore, our top-notch selection is affordable. Our products' outstanding quality has earned us recognition as respected AMF Panel suppliers and exporters from India. Features: â?¢ Outstanding performance â?¢ Superb quality â?¢ Reasonably priced â?¢ Prompt delivery An Crucial Investment To Avoid Blackout: AMF Control Panel To avoid a complete blackout, it is best to install an Automatic Mains Failure (AMF) Control Panel alongside the generator. The device alerts the user when there is a power outage and immediately starts the generator to maintain power. You can prevent the loss of your crucial data by not having to manually turn on the generator when this device is installed. Also, it can stop a number of mishaps or injuries in the production facility. It is therefore necessary to invest in the system in order to avoid any such circumstances, and the greatest part is that doing so won't entirely empty your bank account due to their affordability. You can contact the listed number or e-mail us directly with your questions.
We are the world's top supplier of V-belts. Our main products are V-ribbed belts, automotive timing belts, industrial timing belts, V-belts, toothed belts, etc. Splicing Machine Generally, only one layer of original rubber is used in the production of products, but our products are spliced together with 4 layers of original rubber, and the products produced have a longer life and are more wear-resistant Grinding Machine After the product is initially formed, in order to ensure uniform thickness of the V-belt, uneven parts of the V-belt will be polished off Our Advantage -- We are a factory, so the price is cheap -- Samples are free -- The production adopts new technology and has a longer life -- We will reply to your inquiry within 1 hour -- We can provide the best-selling sizes and models in the local market -- Complete models, fast delivery PRODUCT FEATURES -- Excellent flexibility and high transmission efficiency -- Power transmission belt with multiple longitudinal ribs. -- Torque is transmitted through the contact of the side of the belt rib and the groove of the pulley.� -- Compared with V-belts, it has a larger contact surface area. -- High grade engineered rubber,longer service life. -- Temperature range from -50â?? to +120â?? -- Oil, heat,ozone and abrasion resistant FAQ Q1:Can i order a small quantity of samples? ---- Yes. We can offer you samples at the bulk prices and send them by DHL, TNT. EMS, FEDEX or others according to your requirements. Q2: How could i know whether the belt fits for my machine? ---- You can tell me which product you are interested in, and i will give you its main sizes. You can also send me drawings or samples, and then we will put them into production at your requests. Q3: I want to find a supplier for my new products. Can you help me? ---- Yes. Kindly offer me your drawings or samples for analysis. Q4: How long does it take to make a new product? ---- Usually 10-15 days for drawings and 7 days for samples. Q5: Can we stencil (or print ) our logo or company name on the belt or package? ---- Yes. Please inform us your logo or design before mass production. Q6: What is your payment term? ---- T/T 30% deposit and T/T 70% balance before shipment. Q7: What is your quotation? ---- We will give you FOB price. But EXW, CIF and CNF can also be given according to your demands.
We are the world's top supplier of V-belts. Our main products are V-ribbed belts, automotive timing belts, industrial timing belts, V-belts, toothed belts, etc. Splicing Machine Generally, only one layer of original rubber is used in the production of products, but our products are spliced together with 4 layers of original rubber, and the products produced have a longer life and are more wear-resistant Grinding Machine After the product is initially formed, in order to ensure uniform thickness of the V-belt, uneven parts of the V-belt will be polished off Our Advantage -- We are a factory, so the price is cheap -- Samples are free -- The production adopts new technology and has a longer life -- We will reply to your inquiry within 1 hour -- We can provide the best-selling sizes and models in the local market -- Complete models, fast delivery PRODUCT FEATURES -- Excellent flexibility and high transmission efficiency -- Power transmission belt with multiple longitudinal ribs. -- Torque is transmitted through the contact of the side of the belt rib and the groove of the pulley.� -- Compared with V-belts, it has a larger contact surface area. -- High grade engineered rubber,longer service life. -- Temperature range from -50â?? to +120â?? -- Oil, heat,ozone and abrasion resistant FAQ Q1:Can i order a small quantity of samples? ---- Yes. We can offer you samples at the bulk prices and send them by DHL, TNT. EMS, FEDEX or others according to your requirements. Q2: How could i know whether the belt fits for my machine? ---- You can tell me which product you are interested in, and i will give you its main sizes. You can also send me drawings or samples, and then we will put them into production at your requests. Q3: I want to find a supplier for my new products. Can you help me? ---- Yes. Kindly offer me your drawings or samples for analysis. Q4: How long does it take to make a new product? ---- Usually 10-15 days for drawings and 7 days for samples. Q5: Can we stencil (or print ) our logo or company name on the belt or package? ---- Yes. Please inform us your logo or design before mass production. Q6: What is your payment term? ---- T/T 30% deposit and T/T 70% balance before shipment. Q7: What is your quotation? ---- We will give you FOB price. But EXW, CIF and CNF can also be given according to your demands.
We are the world's top supplier of V-belts. Our main products are V-ribbed belts, automotive timing belts, industrial timing belts, V-belts, toothed belts, etc. Splicing Machine Generally, only one layer of original rubber is used in the production of products, but our products are spliced together with 4 layers of original rubber, and the products produced have a longer life and are more wear-resistant Grinding Machine After the product is initially formed, in order to ensure uniform thickness of the V-belt, uneven parts of the V-belt will be polished off Our Advantage -- We are a factory, so the price is cheap -- Samples are free -- The production adopts new technology and has a longer life -- We will reply to your inquiry within 1 hour -- We can provide the best-selling sizes and models in the local market --Complete models, fast delivery PRODUCT FEATURES -- Excellent flexibility and high transmission efficiency -- Power transmission belt with multiple longitudinal ribs. -- Torque is transmitted through the contact of the side of the belt rib and the groove of the pulley. -- Compared with V-belts, it has a larger contact surface area. -- High grade engineered rubber,longer service life. -- Temperature range from -50Celsius to +120 Celsius -- Oil, heat,ozone and abrasion resistant FAQ Q1:Can i order a small quantity of samples? ---- Yes. We can offer you samples at the bulk prices and send them by DHL, TNT. EMS, FEDEX or others according to your requirements. Q2: How could i know whether the belt fits for my machine? ---- You can tell me which product you are interested in, and i will give you its main sizes. You can also send me drawings or samples, and then we will put them into production at your requests. Q3: I want to find a supplier for my new products. Can you help me? ---- Yes. Kindly offer me your drawings or samples for analysis. Q4: How long does it take to make a new product? ---- Usually 10-15 days for drawings and 7 days for samples. Q5: Can we stencil (or print ) our logo or company name on the belt or package? ---- Yes. Please inform us your logo or design before mass production. Q6: What is your payment term? ---- T/T 30% deposit and T/T 70% balance before shipment. Q7: What is your quotation? ---- We will give you FOB price. But EXW, CIF and CNF can also be given according to your demands.
TPEG is a kind of main raw material (polycarboxylate ether monomer) for producing high performance water reducing type and slump retention type polycarboxylate superplasticizer, it is produced with isopentenol and ethylene epoxide as main raw material. CHEMICAL FORMULA â? CH2=C(CH3)CH2CH2O(CH2CH2O)nH, n=10~60 â? TPEG-2400 is a polyoxyethylene isopentenyl ether with molecular weight 2400.Itâ??s produced by isopentenol and ethylene epoxide as main raw material. PRODUCT CHARACTERISTICIS â? This product is the main raw material for high performance polycarboxylate superplasticizer â? The water reducer from this material(TPEG-2400) has good adaptability to cements. â? Compared with other polycarboxylate material, the production cost of water reducer from this material is greatly reduced. â? The water reducing rate of the water reducer (solid content 22%) from this material amounts to 30% under 1.1% concrete addition. â? The water reducer from this material is characterized by early strength,high-strength. The early strength and 28 daysâ??strength of the concrete is greatly improved, compressive strength ratio %: 1 Dayâ?¥180; 7 Daysâ?¥170; 28 Daysâ?¥150. â? The water reducer from this material has high durability,can efficiently reduce the water/gel ratio, enhance durability, reduce risk of shrinkage and creep. â? The water reducer from this material has less slump loss, which grows initially without compromising strength, it also has sustained release effect, slump retention is â?¥190 mm. â? The water reducer from this material is environment friendly, chloride ion is no more than 0.1%, comply with the ISO 14000 international environment protection management standard. RECOMMENDED FOR PCE made from TPEG-2400 can be used to produce high performance, high strength commercial concrete at work site or long-distant convey. PRECAUTIONS It is non-toxic, nonflammable and can be shipped as general chemicals. Avoid direct sunlight. Keep away from fire or any kind of heat source. Stored separately with oxidants and strong acids and alkali in cool and ventilated place. For more details, please contact with us~
Pure titanium processing parts have high titanium content, good plasticity, easy processing and forming, and good stamping and welding performance. It is resistant to corrosion in the atmosphere, ocean, and other conditions. Pure titanium processing parts are mainly used in aircraft skeletons, ship pipes, valves, pumps, heat exchangers, distillation towers, coolers, ion pumps, and compressor valves. In the industry, Ta1 is generally required for high formability, Ta3 is used for wear resistance and high strength, and Ta2 is the most widely used in general. Product parameters Product Name: Titanium Processing Parts Material grade: TA1 TA2 TC4 TA9 TA10 TA15 TC11 Executive standard: GB/T, GJB, AWS, ASTM, AMS, JIS Process state: Annealed state (M) hot working state (R) cold working state (Y) (annealing, ultrasonic flaw detection) Surface treatment: Sandblasting surface bright surface Product use: Aerospace equipment, petrochemical, shipbuilding, automobiles, watch accessories, etc. Features High-quality material selection Professional processing Fine workmanship Special customization The characteristics of titanium 1. It has a low density, a high strength, and a high specific strength. Titanium has a density of 4.51g/cm3, which is 57% that of steel, less than twice that of aluminum, and three times stronger. Titanium alloy has the highest specific strength of any regularly used industrial alloy. Titanium alloy has a specific strength that is 3.5 times that of stainless steel, 1.3 times that of aluminum alloy, and 1.7 times that of magnesium alloy. As a result, it is a necessary structural material in the aerospace sector. 2. Excellent corrosion resistance Titanium's passivity is dependent on the presence of an oxide film; its corrosion resistance in oxidizing media is far superior to that in reducing medium, and fast rate corrosion can occur in reducing medium. Titanium is not rusted in some corrosive environments. 3. Excellent heat resistance Aluminum typically loses its initial high mechanical qualities at 150 C, stainless steel at 310 C, and titanium alloys retain good mechanical properties at around 500 C. When the airplane achieves 2.7 times the speed of sound, the surface temperature of the aircraft mechanism hits 230 C, and the aluminum alloy and magnesium alloy can no longer be used, while the titanium alloy can. Titanium has a high heat resistance, making it ideal for turbine disks, aeroengine compressor blades, and aircraft rear fuselage skins.
We are the world's top supplier of V-belts. Our main products are V-ribbed belts, automotive timing belts, industrial timing belts, V-belts, toothed belts, etc. Splicing Machine Generally, only one layer of original rubber is used in the production of products, but our products are spliced together with 4 layers of original rubber, and the products produced have a longer life and are more wear-resistant Grinding Machine After the product is initially formed, in order to ensure uniform thickness of the V-belt, uneven parts of the V-belt will be polished off Our Advantage -- We are a factory, so the price is cheap -- Samples are free -- The production adopts new technology and has a longer life -- We will reply to your inquiry within 1 hour -- We can provide the best-selling sizes and models in the local market --Complete models, fast delivery PRODUCT FEATURES -- Excellent flexibility and high transmission efficiency -- Power transmission belt with multiple longitudinal ribs. -- Torque is transmitted through the contact of the side of the belt rib and the groove of the pulley.� -- Compared with V-belts, it has a larger contact surface area. -- High grade engineered rubber,longer service life. -- Temperature range from -50â?? to +120â?? -- Oil, heat,ozone and abrasion resistant FAQ Q1:Can i order a small quantity of samples? ---- Yes. We can offer you samples at the bulk prices and send them by DHL, TNT. EMS, FEDEX or others according to your requirements. Q2: How could i know whether the belt fits for my machine? ---- You can tell me which product you are interested in, and i will give you its main sizes. You can also send me drawings or samples, and then we will put them into production at your requests. Q3: I want to find a supplier for my new products. Can you help me? ---- Yes. Kindly offer me your drawings or samples for analysis. Q4: How long does it take to make a new product? ---- Usually 10-15 days for drawings and 7 days for samples. Q5: Can we stencil (or print ) our logo or company name on the belt or package? ---- Yes. Please inform us your logo or design before mass production. Q6: What is your payment term? ---- T/T 30% deposit and T/T 70% balance before shipment. Q7: What is your quotation? ---- We will give you FOB price. But EXW, CIF and CNF can also be given according to your demands.