High rf power, cover 100% drones uavs like dji phantom 4, phantom 3 professional, advanced, standard series, inspire series... Directional jamming range: 300~2000 meters 6-8 bands in one device. More details and specifications of this selectable handheld 2g 3g 4g lojack jammer are just as follows, if you want to know more just come and get the overall information. Advantages Each unit can jam up to 6-8 frequency bands simultaneously. Continuous operation even in hot climates with no time limits. Design for outdoor installation. Secure design to avoid sabotage. Antenna type options-omni or directional anten nas. Selection of antennas to provide more flexibility regarding jamming coverage. Additional option: wireless rc or ethernet pc remote control. 100% safe vswr over protection for each modula. Specifications isolating signal bandwidth: - 2.4g: 2400-2500mhz - 5.8g: 5725-5850mhz - gpsl1: 1560-1620mhz - 868-920: 868-916mhz - gps l2~l5: 1100~1300mhz - wi-fi5.2g: 5100-5500mhz - wifi3.6g: 3500-3600mhz - 433: 433 mhz Total output power: 350w Jamming range: up to 2000m (depend on cell phone signal length) Power supply: ac 110 or 220v, dc 12v or dc 24v (option) Antennas details: high-tech rubber (8 units) Dimensions of device: 450x380x350mm Weight of product: 35.00kg Accessories 8*antennas Car charger Ac charger Remove control (option)
DRONE QUADCOPTER RC MenPack Jammer up to 1000m CT-4035-UAV CT-4035-UAV Menpack Directional Antenna Drone UAV 102W 5 Bands Jammer up to 1000m Man Pack Anti-Drones UAV 5 Bands High power 102W 1 - 2 Hours Built-in Battery Directional Jamming range 400 -1000 Meters 4 Bands in One Directional Antenna Spec 5 bands 4 in 1 Directional Antenna 2.4GHz: 20W In Direction antenna 2.4GHz: 20W In Direction antenna 5.8GHz: 2 W in direction antenna GPS L1 40W In Direction antenna 433Mhz 25w or 2.4ghz 20W or 868-920Mhz 25W in One Omni Antenna TOTAL 102W Adjustable output power for each band Battery can support 1-2 hours operating Support use while battery charging Adjustable output power Jamming range: Radius 400 1000 Meters Four Bands in One Directional Patch Panel Antennas Weight 14 Kg, Raining proof man pack. Cover Most Commercial Used Drones UAVs like is Dji Phantom 4, Phantom 3 Professional, Advanced, Standard series, Inspire Series. 1 Year warranty, Taiwan design quality, made in Hong Kong
Electrical Frequency Range 824-960/1710-1880MHz Band width 136/170MHz Gain 3dBi V.S.W.R 2.0 Radiation Omni-Direction Polarization Vertical Maximum Input Power 50W Impedance 50 Connector SMA Male Cable Type RG174 Cable Length 3M Antenna Radome Material Aluminum Mount way Magnetic Mechanical Dimensions 29x100mm Weight 15g Operating Temperature -40 to+70 RoHS Compliant YES
GPS/GNSS/GALILEO/SBAS Module The Ct-G354 utilized SiRFstarV and features Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family delivers highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo-tagging images or videos, asset tracking and wearable applications. Performance GPS, GLONASS, Galileo and SBAS reception for high GNSS availability and accuracy High sensitivity navigation engine (PVT) tracks as low as GPS:-165dBm,GLONASS:- 161dBm 52 track verification channels SBAS (WAAS or EGNOS,MSAS) Active Jammer Remover, removes in-band jammers up to 80 dB-Hz Tracks up to 8 CW jammers Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted) �?�¢?? Need operator support Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds. SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode. Reacquisition Time: 0.1 second RF Metal Shield for best performance in noisy environments Hardware and Software Based on the high performance features of SiRFstarV low power single core logic. Adaptive micropower controller Only 50 to 500�¯�¿�½?�?�¼A maintains hot start capability (core logic) < 10mW required for TricklePower mode RoHS compliant (lead-free) Advanced navigation features Smart sensor supported by interface External interrupt input for context change detection MMCX RF Connector Dimension : 3
Ct-G551 3.3V utilizes SiRFstarV and features Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family deliver highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo-tagging images or videos, asset tracking and wearable applications. Performance - GPS, GLONASS, Galileo, BDS and SBAS reception for high GNSS availability and accuracy - High sensitivity navigation engine (PVT) tracks as low as : - GPS : -165 dBm - GLONASS : -161 dBm - 52 track verification channels - SBAS (WAAS or EGNOS,MSAS) - Active Jammer Remover, removes in-band jammers up to 80 dB-Hz - Tracks up to 8 CW jammers - Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted), need operator support. - Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds. - SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode. - Reacquisition Time : 0.1 second - RF Metal Shield for best performance in noisy environments
Ct-G340 S5 of products utilizes SiRFstarV and features Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family deliver highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo-tagging images or videos, asset tracking and wearable applications. Advanced low power technology means there is no need to maintain full power to achieve maximum performance nor turning the GNSS receiver completely off to save power. It breaks then old GNSS performance vs. power trade-off through the fusion of a new high-performance GNSS engine, advanced power management and a smart sensor interface to achieve high sensitivity hot-start conditions for fast location fixes. Performance - GPS, GLONASS, Galileo, BDS and SBAS reception for high GNSS availability and accuracy - High sensitivity navigation engine (PVT) tracks as low as - GPS : -165 dBm - GLONASS : -161 dBm - 52 track verification channels - SBAS (WAAS or EGNOS,MSAS) - Active Jammer Remover, removes in-band jammers up to 80 dB-Hz - Tracks up to 8 CW jammers - Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted), need operator support. - Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds. - SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode. - Reacquisition Time : 0.1 second - RF Metal Shield for best performance in noisy environments Hardware and Software - Based on the high performance features of the SiRFstarV low power single core logic. - Adaptive micropower controller - Only 50 to 500A maintains hot start capability (core logic)
Ct-G353 utilized SiRFstarV and features Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family delivers highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo-tagging images or videos, asset tracking and wearable applications. Performance - GPS, GLONASS, Galileo, BDS and SBAS reception for high GNSS availability and accuracy - High sensitivity navigation engine (PVT) tracks as low as - GPS : -165 dBm - GLONASS : -159 dBm52 track verification channels - SBAS (WAAS or EGNOS,MSAS) - Active Jammer Remover, removes in-band jammers up to 80 dB-Hz - Tracks up to 8 CW jammers - Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted), need operator support. - Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds. - SiRFGeoRecovTM Reverse EE makes position power saving mode. - Reacquisition Time : 0.1 second - RF Metal Shield for best performance in noisy environments Hardware and Software - Based on the high performance features of the SiRFstarV low power single core logic. - Adaptive micropower controller - Only 50 to 500A maintains hot start capability (core logic) - < 10mW required for TricklePower mode - RoHS compliant (lead-free) - Advanced navigation features - Smart sensor supported by IC interface - External interrupt input for context change detection - Dimension : 20 x 20 x 7 ± 0.5mm Advantages - Built-in LNA. - Built-in internal ROM and based on Firmware 5.5.X - It can remove in-band jammer up to 80db-Hz and track up to 8CW jammers, so the module can prevent GPS signal interference when design-in the electrical device with noisy electrical signal interferences such as Laptop, mobile phone, DSC, etc. - Maintain tracking sensitivity as low as GPS @ -163dBm, GLONASS @ -161dBm, even without network assistance. (SiRFstar III has only -159dBm sensitivity) - Support SiRFaware technology - Support adaptive Micro Power Controller power management mode. - < 10mW TricklePower, so user can leave power on all day instead of power off. - Suitable for battery drive devices that need lower power consumption application Ideal for high volume mass production(Taping reel package) - Cost saving through elimination of RF and board to board digital connectors - Flexible and cost effective hardware design for different applications - Embed CGEE (Client Generated Extended Ephemeris) that can capture ephemeris data from satellites locally and predicts ephemeris up to 3 days. So if the module was off within 3 days, it could complete the positioning process with limited time just like hot start.
GPS/GNSS/GALILEO/BDS Module The Ct-G153 utilized SiRFstarV and features Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family delivers highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo-tagging images or videos, asset tracking and wearable applications. Performance - GPS, GLONASS, Galileo and SBAS reception for high GNSS availability and accuracy - High sensitivity navigation engine (PVT) tracks as low as GPS:-165dBm,GLONASS:- 161dBm - 52 track verification channels - SBAS (WAAS, EGNOS, QZSS, MSAS, GAGAN) - Active Jammer Remover, removes in-band jammers up to 80 dB-Hz - Tracks up to 8 CW jammers - Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted) - Need operator support - Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds - SiRFGeoRecovTM Reverse EE makes positioning process being done under power-saving mode. - Reacquisition Time: 0.1 second Hardware and Software - Based on the high-performance features of SiRFstarV low power single core logic. - Adaptive micropower controller - Only 50 to 500 A maintains hot start capability (core logic) - < 10mW required for TricklePower mode - RoHS compliant (lead-free) - SMT pads allow fully automatic assembly processes equipment and reflow soldering - Advanced navigation features - Smart sensor supported by I2C interface - External interrupt input for context change detection - Dimension : 11.2 x 10 x 2.3 mm
GPS Mouse provides customer high position, velocity and time accuracy performances as well as high sensitivity and tracking capabilities. Customers benefit from the strength of both companies. Thanks to the low power consumption technology, the GPS Mouse U8 is ideal for many portable applications such as PDA, Tablet PC, smart phone, automotive etc. Features - 72 channel Ublox M8 positioning engine. - Ultra high sensitivity to -167 dBm. - GPS L1C/A, SBAS L1C/A, QZSS L1C/A and Galileo E1B/support. - Supports GLONASS and is ready for Galileo. - Supports UART, USB and RS232 interface. - Up to 10 Hz update rate. - LED indicate location fix. - Ultra low power consumption.
Ct-GM551 of products utilizes SiRFstarV and feature Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family delivers highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo-tagging images or videos, asset tracking and wearable applications. Features/Performance - GPS, GLONASS, Galileo, BDS and SBAS reception for high GNSS availability and accuracy - High sensitivity navigation engine (PVT) tracks as low as - GPS : -165 dBm - GLONASS : -161 dBm - 52 track verification channels - SBAS (WAAS, EGNOS, QZSS, MSAS, GAGAN) - Active Jammer Remover, removes in-band jammers up to 80 dB-Hz - Tracks up to 8 CW jammers - Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted), need operator support. - Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds. - SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode. - Reacquisition Time : 0.1 second - RF Metal Shield for best performance in noisy environments Features/Hardware and Software - Based on the high performance features of SiRFstarV low power single core logic. - Adaptive micropower controller - Only 50 to 500 A maintains hot start capability (core logic) -
Product Description Most of us know that in important places like prisons, military meeting and museums, actions have always been taken to prevent the message from being given out. What kind of device can install in these places to reach the purpose, the Rackmount High Power Cell Phone Signal Jammer must be the one which is most suitable. A big merit of this rockmount high power cell phone signal jammer is that each band can adjust RF power output level or turn off without influencing the other bandsâ?? operation. The original antenna is external double channel directional panel antennas and you can select antennas to provide more flexibility regarding jamming coverage. The jamming coverage of this jammer is so strong that the jamming range could reach 500m, but the jamming range is also determined by the strength of signal in given area. Seen from its function this one jamming device is really a good one. If you are looking for one, come here! High quality and reasonable price is our promise. Specification Affected Frequency Ranges: (8bands option) -CDMA 800: 850 to 894MHz -GSM 900: 925 to 960MHz -GSM 1800: 1805 to 1880MHz (DCS) -GSM 1900: 1920 to 1990MHz (PCS) -3G: 2110 to 2170MHz -4G LTE: (USA:725-770MHz) or (Europe:790-826MHz) -4G Wimax: (USA:2345-2400MHz) or (Europe:2620-2690MHz) -WiFi: 2400-2500MHz -VHF: 136-174MHz -UHF: 400-470MHz OTHER: Customize frequency Total output power:400~800W Jamming range: up to 500m, the jamming radius still depends on the strength signal in given area External double channel directional panel antennas all the TX frequency covered down link only Power supply: 50 to 60Hz, 100 to 240V AC With AC adapter (AC100-240V-DC27V), Dimension: 420480130 mm Accessories High Power Cell Phone Signal Jammer Antennas Power cable Monitor software function: (Option) Remote control switches of each machine. Remote viewing each machine working state. The power output of each machine remote adjustment. Remote viewing offline log of each machine. Mail receiving each machine working state. The system can set permissions to log on.
Product Description Want to gain a WiFi signal jammer that can only block the WiFi2.4G, but also at the same time can block other WiFi frequency bands at the same time? Then this 5W Powerful All WiFi Signals Jammer (2.4G, 4.9G, 5.0G, 5.8G) that you are viewing here just owns the ability. Firstly as designed with 5 antennas and designed only to block the signals of WiFi so that this all WiFi signals jammer can cut off the signals of WiFi 2.4G 4.9G 5.0G 5.8G and also Bluetooth at the same time with up to 25 meters jamming distance depending on the signal strength in the detailed place. Besides this high power WiFi signal blocker is designed with built-in cooling fan as the cooling system so that Bluetooth all WiFi signals blocker can always stay in good working condition and easily reach the 24/7 nonstop working goal. Thus this Bluetooth all WiFi signals jammer also owns car charger, which enables it easily to be used in the car as well. Owning widely application areas is also a merit of this high power WiFi signal blocker as for place such as the meeting rooms, conference rooms, museums, galleries, theatres, concert halls, churches, temples, restaurants, classrooms, training centers, factories, banks, trains, bus and so on this Bluetooth all WiFi signals blocker can be widely used. And via the following specifications you can also know more about this all WiFi signals jammer. Notes:This product has been upgraded to the New Version. The difference between the New Version and the old Version is that the New Version jammer has used the adjustable buttons, which makes the jammer easier to use. Specifications: Cover interface standards: -WIFI2.4G 2400-2500MHz 30dbm 0 dBm/30KHz(min) -4920-5150 30dbm -5 dBm/30KHz(min) -5150-5400 30dbm -5 dBm/30KHz(min) -5400-5650 30dbm -5 dBm/30KHz(min) -5650-5900 30dbm -5 dBm/30KHz(min) Total output power: 5W Jamming range: up to 25m, the jamming radius still depends on the strength signal in given area External Omni-directional antennas Power supply: 50 to 60Hz, 100 to 240V AC With AC adapter (AC100-240V-DC12V), Dimension: 257 x 140 x 51mm Full set weight: 2.5kg Accessories Jammer AC Adaptor Car Adaptor Antennas
Mobile phone blocker Specifications: Mobile phone blocker Total output power: 35W Jamming range: up to 20-70m, the jamming radius still depends on the strength signal in the given area. Isolating Signal Bandwidth: C CDMA 800:850 to 894MHz C GSM 900:925 to 960MHz C DCS/PCS 1805 to 1990MHz C 3G:2110 to 2170MHz C GPSL1:1570 to 1580MHz C WIFI 2.4G:2400 to 2500MHz C VHF:135 to 174MHz C UHF:400-470MHz -4G Wimax:2345 to 2400MHz(American standard) or 2620 to 2690MHz(European standard) C 4G LTE:725 to 770MHz(American standard) or 790 to 826MHz(European standard) C Lojack:167-175MHz C 315MHz C 433MHz C 868MHz Full set weight: 7.0kg Color: Black Advantages: 1.Can block all popular frequencies all in on( with 14 bands frequencies) 2.Good cooling system( with inside 5 cooling fans) 3.Low noise 4.Each band can be adjusted separately 5.Work non-stopped 6.Stable capability 7.Could be used in car directly with car charger. Mobile phone blocker Accessories C 14 Bands Jammer Body C 14*Antennas C AC Charger 7KG
SiRF V GPS Module GPS Engine Board with MCX/SMA connector Ct-G340 w/Ct-G530P The Ct-G340 w/Ct-G530P module is high performance, low power GNSS receiver, based on the SiRFStarV single chipset technology while providing fast time-to -first-fix. Its far reaching capability meets the sensitivity requirements of car navigation as well as other location-based applications. Ct-G340 w/Ct-G530P is designed to allow quick and easy integration into GPS-related applications, especially for compact size devices, such as: - Fleet Management / Asset Tracking - AVL and Location-Based Services Performance - GPS, GLONASS, Galileo, BDS and SBAS reception for high GNSS availability and accuracy - 52 track verification channels - Active Jammer Remover, removes in-band jammers up to 80 dB-Hz - Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted), need operator support. - SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode. - RF Metal Shield for best performance in noisy environments - High sensitivity navigation engine (PVT) tracks as low as - GPS: -165dB, - GLONASS: -161dBm - SBAS (WAAS, EGNOS, QZSS, MSAS, GAGAN) - Tracks up to 8 CW jammers - Enbedded CGEE/SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds. - Reacquisition Time: 0.1 second Hardware and Software - Based on the high performance features of the SiRFstarVâ?¢ low power single core logic. - Adaptive micropower controller - Only 50 to 500 A maintains hot start capability (core logic) -
Features: - SiRF Star V ultra low power chipset - GPS, GLONASS, Galileo and SBAS reception for high GNSS availability and accuracy - Compact module size for easy integration : 15 x 14 x 2.8 mm The Ct-G551 GPS module is a high sensitivity, low power, Surface Mount Device (SMD) that fully utilized SiRFstarV upgraded features. This 48-channel Global Positioning System (GPS) and Global Navigation Satellite System (GLONASS) receiver is designed for a wide range of OEM applications and is based on the GPS signal search capabilities of the SiRFstarV CSRG05e ROM chipset, Sirf's newest chipset technology. The Ct-G551 provides flexible bus interfaces (UART). The Ct-G551 is designed to allow quick and easy integration into GPS-related applications such as: -Mobile gaming -Cellular handsets -Cameras -Asset tracking -Other location-aware consumer devices Premium on-chip software provides a new level of continuous location awareness by employing -Opportunistic ephemeris decode and advanced power management, which enable the GPS receiver to stay in a hot-start condition nearly continuously while consuming very little power -Full support for client-based and server-based SiRFInstantFixTM -Dynamic contextual awareness, temperature monitoring, and MEMS sensors that work in concert to conserve power and boost performance -Use of software control modules to achieve power saving state SiRF V GPS Module Features Performance -Highest performance Solution: -GPS, GLONASS, Galileo and SBAS reception for high GNSS availability and accuracy -High sensitivity navigation engine (PVT) tracks as low as - GPS:-164dBm - GLONASS:-161dBm -48 track verification channels -SBAS (WAAS or EGNOS,MSAS) -Active Jammer Remover: -Removes in-band jammers up to 80 dB-Hz -Tracks up to 8 CW jammers -Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted)-Need operator support -Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds. -SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode. -Reacquisition Time: 0.1 second -RF Metal Shield for best performance in noisy environments Hardware and Software -Based on the high performance features of the SiRF Star V low power single chipset. -Adaptive Micropower Controller: -Only 50 to 500gA maintains hot start capability -
Consumer drone, gps drone, the drone with gimbal.
SS5-1315 is the GPS module of CSR SiRFstarV. The module is powered by latest CSR SiRFstarV 5e-based chip, multi-GNSS platform and able to track GPS and Glonass constellation at the same time. With DS-Tech proprietary navigation technology that provides you stable and accurate navigation data. The suitable form factor and miniature design is the best choice to be embedded in a device such as portable navigation device, personal locator, speed camera detector and vehicle locator. Applications - Automotive navigation - Personal positioning and navigation - Mobile gaming - Cameras - Asset Tracking - Others location-aware consumer devices Features - 52 track verification channels. - Support GPS, GLONASS, QZSS and being deployed for Compass and Galileo. - Support client-based and server-based SiRF InstantFix TM Extended Ephemeris (EE), - Embedded CGEE / SGEE (With back-end server support) to speed up TTFF performance. - Power supply 3.3V voltage. - SMT type with stamp holes - Small form factor with embedded SiRF Star V technology. - Removes in-band jammers up to 80 dB-Hz, tracks up to 8 CW jammers - Excellent sensitivity for urban canyon and foliage environments. - Dimension : 13 x 15.2 x 2.2 mm
Our most successful ultra small gps module with integrated patch antenna just got even better. For starters, parts of circuitry are tweaked and tightened for performance and characteristic enhancement. Then, a new patch antenna is finely-tuned and utilized, chosen solely for its ability to take the overall gps signal reception to the next level. This deadly combination provides a stunning sensitivity improvement across the board. Pa6b is completely pin-to-pin compatible with its predecessor pa6, offering not only the same ease of integration and small footprints, but also utilizing the latest gps chipset mt3329 from mediatek. You can instantly upgrade your pa6 based gps device by replacing them with pa6b. New features: Significant gps reception/sensitivity improvement Support up to 210 prn channels Jammer detections and reduction Multi path detection and compensation Pin to pin compatible with fgpmmopa6. Specification -mediatek inc. Mt3329 -super small size: 16 x 16 x 6 mm -tcxo design -sensitivity: -165 dbm tracking -l1 frequency, c/a code, 66-channels -position accuracy:
1 Model NO: FD-GPS-502-1 5" GPS navigation with DVB-T, ISDB-T, TMC, WIFI optional. 4.85 LCD TFT display with touch screen for control and input. Professional portable navigation system, UI design for mobile application, Convenient operation. Most popular Windows OS, ALT4 WINCE6.0,533MHZ. World class CPU . SD card of extensible capacity for mapping data, MP4 video, MP3 music, Photo, and personal files . Memory 64MB DDRI,128MB nanflash. Map for major large and medium scale cities, detailed mapping data, real voice guidance, automatic smooth switching. Built-in high sensitive GPS receiving module and antenna, Faster GPS signal receiving and More accurate positioning. Prompt and accurate positioning applicable for GPS data collection, e.g. Area measuring Prompt response for both cold and warm start; Re-capture of GPS signal just in 1 second on average, Accuracy of positioning: no more than 10 meters; Accuracy of timing: no more than 1 microsecond. 5" gps navigation with DVB-T, ISDB-T, TMC, WIFI option.
Specifications: Cover interface standards: CDMA/GSM : 850 to 960MHz DCS: 1,805 to 1,880MHz PCS:1900 to 1990MHz 3G: 2,110 to 2,170MHz GPS : 1500 to 1600MHz LOJACK :167-175MHZY You can select five of above frequency bands you need in a jammer ODM and OEM orders are welcome Total output power: 2.5W ,Small size design so the temperature is a bit higher Jamming range: up to 20m, the jamming radius still depends on the strength signal in given area External Omni-directional antennas all the TX frequency covered down link only Power supply: 50 to 60Hz, 100 to 240V AC With AC adapter (AC100-240V-DC12V),3500mA/H battery Dimension: 119x74x29mm and not include antennas Full set weight: 0.75kg Advantages: Multiple bands cover cellphone, 3G ,GPS,LOJACK bands High output power Cooling fan inside , Could be used in car directly,With car charger and AC charger With Built-in Battery:3200mA/h,Charge full time about 4Hours,Working time:1-2Hours. Application Area: it can be applied at meeting rooms, conference rooms, trains, bus and more For some locations of special purpose such as hospitals, gas stations and more, Please do field test first to make sure no interference happened to the normal operation of their equipment and instrument Warranty: One year from delivery date.
