Um 1D Ultrasonic Thickness Gauge Suppliers and Manufacturers

Used for measuring thickness and corrosion of pressure vessels, chemical equipment, boilers, oil storage tanks, etc. In industries of petroleum, shipbuilding, and machine manufacturing. Tm-8812, tm-8811, can measure any hard materials, including steel, cast iron, aluminum, red copper, brass, zinc, quartz glass, polyethylene pvc, gary cast iron, nodular cast iron and other materials. Tm-8810, can measure only 11 types of materials, including steel, cast-iron, aluminum, red copper, brass, zinc, quartz glass, polyethylene, pvc, gray cast iron, nodular cast iron. Dimensions: 160x68x32mm

Operating Principle:P-E (pulse-echo) with dual-crystal probes Measuring Range:0.03'' to 12'' in standard mode Storage:5 arrays are divided to store 500 thickness values Repeatability:0.001'' Display Resolution: 0.001inch Units:Inch or Millimeter Update Rate:4Hz Measuring Error: Low limit to 0.4'': +-0.004'' 0.4'' to high limit: +_ (1%H+0.1) mm Note: H is the actual thickness of the testing material Operating Time:Up to 200 hours with alkaline batteries (without backlight) Instrument Shut-off:AUTO OFF after 5 minutes of inactivity Power Requirements:Two 1.5V AA alkaline batteries (Warning with low battery voltage) Operating Temperature:14°F to 122°F, 4°F in special requirements

Linshang LS223 coating thickness gauge also called coating thickness tester is an instrument that separates the host from the probe. The measuring range is 5000¼m and the meter can automatically identify the measuring substrate. This instrument uses both Hall Effect and eddy current measurement principles to measure the non-magnetic coating thickness on magnetic substrates and the non-conductive coating thickness on non-magnetic substrates. It is a dual-use instrument for both ferrous and non-ferrous substrates.

Automotive paint meter, also called car paint meter, is a special instrument for detecting the automobile substrate surface coating thickness. The covering surface of a car basically has a paint coating. Using a automotive paint meter to measure the paint surface coating thickness can directly determine the sheet metal and spray paint of a car. It can also indirectly determine the damage degree of the car. The LS220 automotive paint meter has small size and is especially suitable for carrying around when going out for inspection. This car paint thickness gauge has the characteristics of fast test speed, stable test data, high measurement accuracy and so on.

LS225+F500 is a plating thickness gauge with separate host and probe. It consists of LS225+F500 multi-probe coating thickness gauge host and F500 probe. LS225+F500 plating thickness gauge is specially used to detect copper, zinc, tin, chromium and non-magnetic coatings on iron and other ferromagnetic metal substrates. The plating thickness gauge has ultra-high measurement accuracy and repeatability. It can be used to measure the thickness of ultra-thin coatings below 10�¼m. The LS225+F500 plating thickness gauge is particularly suitable for testing small-sized materials with a minimum measurement area diameter of only 7 mm. We provide professional test fixtures for users to buy, especially suitable for the measurement of thin coating thickness of small workpieces such as screws and bolts and various irregual shaped materials.

Key Specifications/ Special Features: We are leading suppliers of best quality A4 copy paper 80gsm, 75gsm,70gsm and looking for serious buyers in need of our papers contact us with your full details for more information on our product. We supply A4 Copy Paper of various brands with the following specifications: Gramage: 80gsm, 75gsm, 70gsm Quality: Imported 100% Natural Wood Pulp Brightness = 102-104%,Natural White Capability: High Speed Copying100ppm, Laser Capable,Inkjet Capable, Fax Capable. Thickness: 103-110 um Surface roughness TS ml/min: 75-175 Surface roughness BS ml/min: 100-200 Bending stiffness MD: >110 Mn Bending stiffness CD: >50 Mn CIE whiteness: 148-152 or 152-165 Cobb Test: 27-33 g/m2 27-33 Two-sided usage gives the paper sheet high opacity. Smooth paper surface makes printing and copying. Moist protected wrapper Size * International standard * A4: 210 x 297mm * A3: 420 x 297mm * 8.5 x 11-inch (216 x 279mm) * 8.5 x 14-inch (216 x 330mm) Key Performance - No jam in photocopy machine - No double feed - Stay flat after copying - Leave no dust in the copy-machine - Nice appearance-white and clean - Nice touch-smooth and bulky - No see through-print both sides - Been developed for : Photocopy Macchines, Laser Printers, Ink-jet Printers, Fax Machines Features and Benefits - Perfect for high-quality printing and copying - Super high whiteness produces outstanding clarity and contrast for all graphics and text - Precision-cut edges for trouble-free performance - User-friendly box design with built-in handle for easy carrying, tear slot perforation for easy access to the reams and label for filing Outstanding Packaging - Standout/Premium - Special Protective/Moisture - Proof Wrapper - Economic box - 500 Sheets per Ream 5 Reams per Box - 1560 Boxes per 20ft container (With Pallet) - 1600 Boxes Per 20ft container (Without Pallet) - 7800 Reams Total in one 20FCL (With Pallet) - 8000 Reams Total in one 20FCL (Without Pallet) ItemA4 paper Copy Paper Material100% wood pulp SizeA4, A3, Letter size(8.5"x11"),Legal size(8.5"x14") Base Weight80gsm, 75gsm, 70gsm Whiteness92-96%, 98-100%, 102-104% Packing500 sheets per ream, 5 reams per carton(box) Load Qty(20ft)GSMA4A3Letter sizeLegal size 80gsm7800 reams3900 reams8000 reams6300 reams 75gsm8000 reams4000 reams8400 reams6500 reams 70gsm8200 reams4100 reams8800 reams6700 reams Key performanceNo jam in photocopy machine No double feed Stay flat after copying Leave no dust in the copy-machine Nice appear

Looking for Coating Thickness Gauge, Contact India Tools & Instruments Co. is a Maharashtra based company that is considered as one of the well-known Coating Thickness Gauge manufacturers, suppliers, and exporters nationally as well as internationally.

Looking for Ultrasonic Thickness Gauge, Contact India Tools & Instruments Co. backed by rich industry experience, the company is recognized as splendid Ultrasonic Thickness Gauge manufacturers, suppliers, and exporters based in India. Visit: http://www.india-tools.net/ultrasonic-thickness-gauge.html

TX Coating Thickness Gauge products have been available for 30 years and are currently available in ED300 and ED400 models, which comply with ISO 2360. The digital coating thickness gauge is used to measure the thickness of the insulating coating on non-ferrous metals. The Eddy current coating thickness gauge is suitable for quick non-destructive coating thickness inspection for production, sale and engineering. The digital coating thickness gauge is used for production inspection, acceptation inspection and quality supervision. What Is Coating Thickness Gauge First This eddy current gauge adopts the principle of eddy current. When the probe is in contact with the sample, the eddy current will be generated, and the electromagnetic field of the eddy current will change the probe parameters, and the thickness of the coating can be obtained by measuring the change of the probe parameters. Second The coating thickness gauge is mainly used to measure the anodic oxide coating on aluminum alloy profiles, aluminum composite panel, and other non-ferrous metals. This portable hardness tester can also be used to measure the thickness of paper and plastic foil. Third Since the beginning of production in 1993, with the growth of China's aluminum processing industry, digital coating thickness gauge is constantly improving. It has three generations. ED400 is the latest generation product. Its quality and test accuracy conform the ISO 2360. There are many hardness tester suppliers, but we are one of the best choices for you.

Coating Thickness Gauge TX Coating Thickness Gauge products have been available for 30 years and are currently available in ED300 and ED400 models, which comply with ISO 2360. The digital coating thickness gauge is used to measure the thickness of the insulating coating on non-ferrous metals. The Eddy current coating thickness gauge is suitable for quick non-destructive coating thickness inspection for production, sale and engineering. The digital coating thickness gauge is used for production inspection, acceptation inspection and quality supervision. Types of Coating Thickness Gauge Coating Thickness Gauge ED400 Coating Thickness Gauge ED300 What Is Coating Thickness Gauge First This Eddy current coating thickness gauge adopts the principle of eddy current. When the probe is in contact with the sample, the eddy current will be generated, and the electromagnetic field of the eddy current will change the probe parameters, and the thickness of the coating can be obtained by measuring the change of the probe parameters. Second The coating thickness gauge is mainly used to measure the anodic oxide coating on aluminum alloy profiles, aluminum composite panel, and other non-ferrous metals. This portable hardness tester can also be used to measure the thickness of paper and plastic foil. Third Since the beginning of production in 1993, with the growth of China's aluminum processing industry, digital coating thickness gauge is constantly improving. It has three generations. ED400 is the latest generation product. Its quality and test accuracy conform the ISO 2360. As a hardness tester company, we will do our best to meet all the needs of customers.

Product description Amittari standard type coating thickness gauge ac-110 series have 2 types: type a ( integral type ), type as ( separate Type). Integral type suitable for single-hand operation, large probe with large contact surface have better stability, users can get continuous, good repetitive and precise measurements. Separate type can provide several type probe, measure can bemore flexibility. Product parameters Measuring range0~1250 um 0~50mil (other range may be specified) Resolution0.1 um (0~99.9um)/1 um (over 100um) Accuracy:1~3%n or 2.5 um or 0.1mil (whichever is the greater) Humidity:

Product description The basic type coating thickness gauge ac-110 series have two types: type c ( integral type ), type cs ( separate type ); suitable for automotive, paint layer coating thickness measurement; integral type suitable for single-hand operation, large probe with large contact surface have better stability, users can get continuous, good repetitive and precise measurements. Separate type can provide several type probe, measure can be more flexibility. Product parameters Measuring range0~1250 um 0~50mil (other range may be specified) Resolution0.1 um (0~99.9um)/1 um (over 100um) Accuracy:1~3%n or 2.5 um or 0.1mil (whichever is the greater) Minimum measurement area6 mm Size120x63x25 mm Power supply2x1.5vaaa um-4 battery Weight90 g (not including batteries)  Product accessories Standard accessoriesMain unit Calibration foils Substrate ( iron ) Substrate ( aluminium ) Carrying case Operation manual Optional accessories Usb data output Bluetooth data output Buying guide When you choose the model number of amittari instrument, the default is standard delivery. If you need other optional accessories, please tell our customer -service worker. The following three items are basic optional accessories choices Standard accessories+usb data output Standard accessories+bluetooth data output Bluetooth accessories Portable platstic case

Product Description The Anticorrosion Coating Thickness Gauge is a kind of portable measuring instrument, it can quickly, no damage andprecise coating, coating thickness measurement. Not only can be used in the laboratory, also can be used in the engineering field. Through the use of different measuring head, but also can meet the needs of a variety of measurement. Widely used in manufacturing, metal processing industry, chemical industry, commodity inspection and testing field. Is the material protection professional necessary instruments. Product Feature * Digital backlit display gives exact reading with no guessing or errors. * Two measurement mode: Single and Continuous. * Wide measuring range and high resolution. * Manual or automatic shut down. * Use USB data output with connection PC * Provide Bluetooth data outputchoice. Product Parameters Range 0~12 mm (other range may be specified) Resolution 0.01mm / 0.1mm Product Accessories Standard Accessories Host Calibration Foils Substrate ( Iron ) Substrate ( Aluminium ) Carrying Case Operation Manual Optional Accessories USB data output Bluetooth data output Portable plastic case

Compact and low-cost coating thickness gauge - for all coatings on steel e. g. paints, enamels, chrome, zinc - and for all insulating coatings on nonferrous metals e. g. anodising or paint on aluminium, zinc diecasting etc. Application This compact, practical hand-held gauge has been designed for nondestructive, fast and precise coating thickness measurement. Depending on gauge type, (see delivery schedule) measurements can be taken on - all non-magnetic coatings (e. G. Paints, enamels, chrome, zinc etc. ) on steel - all insulating coatings (anodising, paint coatings, ceramics) on all non-ferrous metals such as aluminium, copper, brass, ustenitic stainless steel. The gauge has especially been designed for use in the field of industrial corrosion prevention. Readings as well as statistical values can be documented with the portable miniprint data printer. For measurements in dark areas all models feature display backlight. Description The single pole probe is connected to the gauge by a 1 metre cable. The newly developed probe tip is made from very hard and wear resistant material which guarantees virtually unlimited life provided it is handled correctly. According to model, the gauge is supplied with: - a magnetic-induction probe for measurements on steel (f) or - an eddy current probe for measurements on nonferrous metals (n) or - a dual probe (fn) for measurements on steel and on nonferrous metal substrates (fn) New! The dual fn probe automatically adjusts to the correct substrate metal: Ferrous/non-ferrous. This feature is not available with the 500 model. The gauges conform to din, iso, bs, astm.

YUSHI INSTRUMENTSï¼?We Are Manufacturer 20 years NDT experience,ISO, CE & RoHS certificated, this is how we keep superior quality and competitive offers for global valued customers Measuring Principle Eddy Current Method (NFe): measuring the thickness of non-conductive coatings on copper, aluminum, stainless steel and other non-ferromagnetic substrates, e.g. painting, varieties of anti-corrosion coating, powder spraying, plastic, rubber, synthetic material, oxide film and phosphate film, etc. Features Display: High Contrast Segment Liquid Crystal Display(LED Backlight) Measuring Range: 0-2000m Working Temperature: -10 ~ 50 Auto Power-off: Auto off after 3 minutes of inactivity Calibration Method: Zero calibration, One-Point and Two-point calibration Power Requirements: 2 AA size batteries, low-voltage indication function Size: 149mm X 73mm X 32mm (H x W x D) Weight: 200g including batteries Battery is not included

YUSHI INSTRUMENTS�We Are Manufacturer 20 years NDT experience,ISO, CE & RoHS certificated, this is how we keep superior quality and competitive offers for global valued customers Measuring Principle Magnetic Method (Fe): Measuring the thickness of non- magnetic coatings on steel, iron and other ferromagnetic metal substrates, e.g. painting, varieties of anti-corrosion coating, powder spraying, plastic, rubber, synthetic material, phosphate coating, chromium, zinc, Aluminum, tin and cadmium, etc. Features Display: High Contrast Segment Liquid Crystal Display(LED Backlight) Measuring Range: 0-10000μm Working Temperature: -10 ~ 50 Auto Power-off: Auto off after 3 minutes of inactivity Calibration Method: Zero calibration, One-Point and Two-point calibration Power Requirements: 2 AA size batteries, low-voltage indication function Size: 149mm X 73mm X 32mm (H x W x D) Weight: 200g including batteries Battery is not included

The "AMTG-2" is a portable feeler gauge. It is used to measure the thickness of non-magnetic materials, such as plastic, glass, ceramic, aluminum, titanium, copper etc... The accuracy of the measurement is not affected by the shape of the samples. It’s designed by basing on the method of the Hall Effect. Simple and rapid measure as below: - Place the steel ball on one side of the sample and the probe on the opposite side - Move the sample and let the probe to be the tested position - The steel ball will be drawn by the probe automatically - The Hall Effect sensor on the probe measures the distance between the probe tip and the steel ball

As one of India's largest producers of flat rolled products, Hindalco's aluminum sheet is produced from its own cast slabs or continuous cast coils, rolled down to customized thickness, gauge and tolerances. Our hot rolled plates are durable and deliver long lasting performance. Stretched plates Thickness limit 6 - 12 mm Length limit 2000 -4000 mm Applications : Electrical busbars and ducting Tanks Ships, boats (corrosion-resistant and weldable plates) Defence and industrial uses (strong alloy plates) Aircrafts