For porcelain, ceramic and stone. Pieces with low absorption. Colors: grey and white Production country: colombia Origin port: buenaventura Qty per 20’ft container: 1000 bags x 25kg Cfr and cif rates available worldwide. Free samples upon request delivered worlwide. Grout available in required colors.
Features: 1. This product is a new type strong adhesive, applied to indoor and outdoor wall paste of large-scale ceramic tile, grassing stone, and natural stone material 2. The indoor ceramic tile adhesive of light steel frame system board, like gypsum board and Eight board 3. Can be used on the low water absorption surface, like paste new ceramic tile above the old ones, and can be used on the firm painting surface 4. Excellent flexibility, can bear the bonding layer stretch that caused by temperature 5. Good anti-infiltration function 6. No need to wet the brick wall, effectively improve the efficiency. Surface Treatment: 1. The substrate surface should be firm, dry and clean, no grease, no wax, and other loose materials. 2. For the new wall, when finding the leveling layer of cement mortar, plaster, should improve the leveling layer of mortar label the cohesive force of the wall, or mix MB-03 slurry additive. Specific reference, please look at the MB-03 introduction. Operation Process: 1. Using tooth scraper to scrap the adhesive onto the surface evenly, control within 1m2 2. Push the ceramic tile or heavy type ceramic tile above it 3. For the ceramic tile with deep ditch or stone material, expect for the surface, scrap the backside of the tile or the stone material. Cautions: 1. Never mix the dry slurry with water and use again 2. For the light wall board install large-scale decorative panels, like gypsum board and Eight board, confirm the wall firmness before operation 3.For the painting surface, make sure the initial bond strength and no flake 4.Operating under 5¡æ~40¡æ situation 5.Clean the surface by little wet sponge or cloth before it dry 6.Leave 1.5mm joint space between two tiles, suggesting MB-MC color anti-moldy gap filler. Technical Reference: Coverage area(amount). using 3*3mm tooth scraper about 1.7kg/m2. using 6*6mm tooth scraper about 3.0kg/m2. using 10*10mm tooth scraper about 4.5kg/m2. Technical reference: 1, Adjust time: about 15min (adjust time: the effective time for the dislocation to adjust) 2, Cool time: about 10min (cool time: the longest cool time that the adhesive can last ) 3, Dry time: 24h (according to the weather) 4, Water resistance: excellent; non-toxic, prevent firethe smoother the surface, the less amount 5, When dry, anti-weak acid, anti-strong alkali and oil resistance 6, Cut degree: £¾1.2MPa (14days later). Store Method:Store in cool and dry place, unopened product can be saved for one year. 25kg/bag.
Hebei Suna Technology Co., Ltd. was founded in 2002ï¼?Our main products includes HPMC, HEMC,� RDP,� HEC,� PVA, CMC, Inorganic Pigment, Titanium Dioxide, and so on. Please contact with me if you are interested in our products.
MOQ: 1000 Bags Shipping: Sea Freight
Our tile adhesive can be used for bonding all kinds of tiles and stone sheets, especially good for heavy duty work. No matter if the surfaces are rough or smooth, or those with little water absorption, it works very well on them. When installation, there is no need of wetting the tiles or walls, thus very easy to use, saving time and labor costs. Features: Water-resistant durable non-toxic sunlight-resistan environment-friendly anti-cracking anti-dustï no peeling off colorful
Non yellowing Tile Bathroom adhesive ATTRIBUTES Color: More than 1000 glue colors for matching, customized color Type: Artificial stone/Quartz stone adhesive OEM: OEM and ODM are available Warranty:24 months saved in 10 Celsius-18 Celsius and 10 years nonyellowing Cartridge Brand: MIXPAC Applicable Stone: Most artificial marble, granite, natural stone, etc Mix Ratio:10:1 SPECIAL FEATURES 1.Own 90% of the Chinese market 2.Bond Strength: High bond strength, better than Corian and LG, Quartz adhesive is better than Integra 3.Non yellowing with 10 years warranty 4.Low temperature resistant: -50 Celsius, High temperature resistant: 180 Celsius 5.Curing time: 18-22minuts at 24 Celsius 6.Shelf time: 24 months (10 Celsius-18 Celsius) 7.More than 1000 colors, matched with Staron, Corian, Case stone, Silestone, Magicstone, etc 8.The only Chinese glue manufacturer can use MIXPAC cartridge with intellectual property protection 9.SGS,ROHS,SVHC,ISO9001 Certificated 1
Productcode: b30 Use range: in hotweather zone Characteristics:strong hardness, good tightness, high adhesiveness, waterproof. Usage: spray the adhesive evenly on the color tiledirectly. It could be also diluted with 30 parts of water with every 100 partsof adhesive. Netweight: 50kg Color: milky white Dryingspeed: quick
Product code: b32 Use range: in cold weather zone Characteristics:excellent stickiness to the bottom material, proper flexibility, waterproof. Usage: spray the adhesive evenly on the clean bottom board. Net weight: 50kg Color: black or red or others(customized by you) Drying speed: quick.
Product code: b29 bottom adhesives for hot weather Environment: in hot weather zone Characteristics: excellent stickiness to the bottom material, prope r flexibility, waterproof Usage: spray the adhesive evenly on the clean bottom board. Net weight: 50kg Color: black or red (customized by you) Drying speed: quick
1. Product details Name: hydroxypropyl methyl cellulose (hpmc) Brand name: 3s Cas no.: 9004-65-3 Country origin: china (mainland) Ph value: 4.0~8.0 Particle size (80um mesh): 100% Bulk density: 300~500kg/m3 3. Product description 3s-hpmc is a kind of white powder of hydroxypropyl methyl cellulose. 4. Viscosity specifications: By ndj viscometer (2% absolutely dry, 20 degree) Viscosity range(mpa.S): 5~200000mpa.S 5. Product features 3s-hpmc is equipped with thickening, water retention, film forming, surface activity, lubrication, emulsification, suspension and other functions. Also it has curdlan, antiferment, odorless, tasteless, stable ph value and other features. 6. Product application 3s-hpmc can be used as thickener, dispersant, emulsifying agent, film-foaming agent and etc. It would be widely used in dry mixed mortars and painting materials in building construction. 7. Packing Packing: 20/25kgs /bag. Plastic woven bag with pe liner. 8. Delivery Delivery time: within 15~20days after payment confirmed. 9. Storage: 3s-hpmc must be stored in a cool and dry place. To prevent moisture penetration, packaging which has been opened should be sealed again as soon as possible. Not exposure to water, sunlight, especially during transportation. 3s-hpmc storage time should not exceed 6 months from the date of delivery. 20/25kgs /bag. Plastic woven bag with pe liner.
Used to adhere faience, ceramics and such materials. Easy to prepare and apply, with high stability, cement based and grey colour adhesive. Along above materials, in all kind of indoor/outdoor horizontal-vertical of concrete, plaster and cement-based surfaces applications. Applications òIndoor/Outdoor òFixings tiles and ceramics on wet cement-based surfaces like bath, kitchen and balcony. òEach packages are 25 Kg. Packages are25kg.
Product Description Redispersible polymer powder produced by spray-drying special water-based emulsion, mostly based on vinyl acetate-ethylene (VAE), and then obtained a free flowing organic polymer powder. It can re-disperse in water, and form a film after water evaporation by coalescence of individual polymer particles. The film acts as an organic binder, to glue together different substrates, reinforce mortar structure and provide excellent adhesion at cement or gypsum based dry mixed mortar substrate interface. Technical specification Appearance: White powder or Fine particles, Free-flowing Solid content: 98.5% Bulk Density: 300-500 Viscosity of 50% water solution(Pa.s): 8-12 Minimum film forming temperature: 0 Ash content(1000): 10 Average particle size(um): 80-120 PH value: 6-8 Glass transition temperature(Tg): 0 1.Standard packing is 25kg paper bags inner with PE bag 2.Bluk bags 400kgs/bags,500kgs/ bags 3.Follow customers requests
HPMC for wall putty is used to apply tiles on concrete or brick walls. It consists of cement, sand, limestone, our HPMC and various additives prepared for mixing with water prior to use. HPMC plays an important role in improving water retention, workability and sag resistance. In particular, HPMC for wall putty helps to improve adhesion strength and open time. As a functional decorative material widely used nowadays, tile has different shapes and sizes, unit weights and densities, and how to paste this durable material is a constant concern. the presence of HPMC for wall putty ensures to some extent the reliability of bonding works, and the appropriate cellulose ether ensures the smooth construction of different types of ceramic tiles on different bases The appropriate cellulose ether can ensure the smooth construction of different types of ceramic tiles on different foundations. We have a wide range of HPMC products available for various tile bonding applications to ensure the development of strength and achieve excellent bonding strength. The more you can click here.
Warranty:1 Year After-sale Service: Online technical support, Other Project Solution Capability : NONE Application: Office Building, Construction Design Style: Modern Place of Origin: Jiangsu, China Brand Name: Letong Mortar Usage: Plastering Mortar Grade: Adhesive mortar for tiles Mixing Mortar Type: Adhesive mortar for tiles Used in: Suitable for all building walls Product name: Adhesive mortar for tiles Feature: interface sticking force Color: Powder Keywords: Weather resistance Packaging & delivery Package Type: standard package
Strengthened tile adhesive "SM 514" for porcelain tiles is applied to facing inside and outside of buildings from brick, concrete and plastered surfaces on a cement or cement-lime basis by all types of wall and floor ceramic tiles and others facing materials with water absorption more than 2%. Facing works inside buildings can be carried out with materials with water absorption less than 1%, including large-format and porcelain tiles
Hydroxypropyl methylcellulose (HPMC) is one of the non-ionic cellulose mixtures.It's a semi-synthetic, inactive, viscoelastic polymer, widely used in water-based coating, construction and building materials, printing inks, oil drilling area ect . Main Application : * Ceramic Tiles Adhesive Interior Wall Water-Resistant Putty * Exterior Wall Waterproof Putty (EPS)Exterior Wall Insulation Adhesive Mortar * Exterior Wall Insulation Plaster Mortar (EPS )Trim Strip Machine Wiping Mortar * Dry Powder Interface Agent Tile Dry-mixed grout
Quick Details Classification:Chemical Auxiliary Agent CAS No.:9004-65-3 Other Names:MHPC MF:C12H20O10 EINECS No.:220-971-6 Purity:99.9% Place of Origin:China Type:Thickener, stabilizer, emulsifier, excipient, water retention agent Usage:Coating Auxiliary Agents, Electronics Chemicals, Leather Auxiliary Agents, Paper Chemicals, Petroleum Additives, Plastic Auxiliary Agents, Rubber Auxiliary Agents, Surfactants, Textile Auxiliary Agents, Water Treatment Chemicals Brand Name:Zongyan Model Number:ZY Product name:hpmc for tile adhesive Keywords:hpmc sale Appearance:White Powder Color:Pure White Certification:MSDS Package:25kg/bag/drum Grade:Industrail Grade Viscosity:25-200000 mpa.s Sample:Availabe PH:6-8
PE-265 is and acrylic pressure-sensitive adhesives. It has high initial tack, and suitable to apply on PVC flooring tiles. 1. Wide-range decorative applications. 2. Domestic constructions. 3. Compatible with PP, PE, PVC to non-woven fabrics or foam products.
Tile & Stone Adhesive is a factory-made specially formulated polymer modified cementitious dry powder that is mixed with water or polymer additive to form a consistent paste for problem-free tile installation. Adhesive is used to stick tiles & Stones to surfaces. Tiling adhesive needs to be strong when fixing tiles� to ensure they don't slip and smash and become unsafe.
JK TileMaxX - General Purpose Tile Adhesice TA11
