megapixels1/3-inch cmos digital image sensord-zoom, dnr, d-wdr, hlc, osdsense-up, smart ir, icr Size: 177(w) x 76(h) x 74(d)mm Weight: 0.7kg
Surveillance cameras, solar panels, agricultural product, chemicals, energy supplies.
2.4GMHz Wireless digital receiving;high security and strong anti-interference; easy to install, no need of wiring, and cheap installation cost; Easily connects to your TV&DVR. Receiving Distance:>200m; Operating Temperature :-30c/60c ; Power Supply:AC100-240V,DC5v,1A; System:N/P; A/V output; Video:QVGA480*320.
The led monitor embedded at both the left and right sides of the gate leaf can accurately indicate the prohibited articles which are hidden at the places of human body with corresponding height. The alarming areas can be indicated by the column lamps at the both left and right gateposts. 3. It can be connect with computer and the result can be display on the computer(optional). The metal detecting gate can be operated either thorough the remote control or by the operation panel directly
The world most mini-sized and HD spy Camera&Video camouflage Equipment The most mini-sized camouflage equipment with the best HD display, integrated with video, camera, voice record and storage functions. Hard to be found during operation. It is obsolutely the fiest choice for non-normal shooting. It is easy for operation with vibration attention function. The memory card is detachable. There are tri-color lights to display the condition of the equipment.
Key Specifications: Camera input: channels Image compression: H. optimized (high recording definition, especially when there is intense movement Video total frame rate: fps in PAL, fps in NTSC Display resolution: X , X , X Recording resolution: X , X , X Compression ratio: - M/C/H Network protocol: TCP/ UDP Operating System: Windows / XP
Main Features: * Compatible with all cameras * Utilizing UTP wires * Effective distance: max. 1200m * LED indicates power and video * Optional built-in surge protection Specifications: MODEL TVT 400 Receiver Transmitter Power supply AC 9V / 200mA Operating frequency DC to 6MHz Common mode rejection 0~6MHz 60dB (typical) Wire size 24~16AWG UTP UTP category Unshielded category 5 or better Impedance 75ª+ (coaxial cable with BNC male connector) DC loop resistance 18ª+/100m Distributed capacitance < 62pf/m Operating temperature -25ípC~70ípC Storage temperature -40ípC~150ípC Humidity range 0~95%, non-condensing Net Weight 320g 310g Dimension 136mm*132mm*28mm Net Weight: Receiver:320g Transmitter:310g
Dcm900 usb microscope camera Pc interface: usb 2.0 Sensor format: 1/2.3 inch, enhanced color cmos, 9.1m pixels Maximum resolution: 3488*2616(hardware) Frame rate: 1 fps at 3488*2616, 30fps at 640*480; low or high Capture frame: support high speed preview and static capture Video mode: 3488*2616, 1600*1200, 1280*768, 640*480 Dynamic range: 75db Sensitivity: 1.4v/lux-sec at 550nm Color: max 1.64 million 24bit color; color-mono / gamma / saturation / contrast Color mode: color / mono, r-g-b / b-g-r Driver: support direct show & twain Power source: from usb 2.0 port White balance: automatic and manu r-g-b Exposure: auto exposure, target, time, gain Misc: flip-horizontal or flip-vertical Light source: 50hz or 60hz
Fingerprint device with time and attendance function, networkable to any PC.
HTEDVS/R-SPC Stand-alone DVR Hengtong htedvs/r-spc embedded stand-alone digital video recorder is a mainboard with 4 channels video input, which can be assembled in the standard home pc or industrial chassis. By inserting the video card into the standard pci slots the real time video and audio input channels will be expanded up to 8/12/16/20/24, and non real time video input channels up to 32-64. Sound card. Network card, vga card, rs232, usb integrated on the mainboard with 64m memory. Video output, vga, mic, audio output and infrared remote control interfaces offered, alarm i/o, mouse operation and nas (smb/cifs) supported.
Wireless cctv camera and receiver Function 1. Monitoring anywhere 2. Theft prevention Specification 1. Imaging sensor: 1/3 inch cmos 2. Pixels 628+582(pal) 510+492(ntsc) 3. Horizontal resolution tv lines 380 4. View angle degree() 62 5.Minimum illumination lux 1.0lux / f2.0 & 0lux(ir on) / 1.5lux / f1.5 6. Video gain control automatic 7. Frequency mhz ism 2, 400~2, 483 4ch* 8. Transmission power 10mw/ce; 2mw/fcc 9. Modulation mode fm 10. Bandwidth 18mhz 11. Power supply vdc +8 12. Consumption current ma 80 & 120(ir on) 13. Operating temperature +/= -10 ~ +50 / +14 ~ +122 14. Storage temperature +/= -40 ~ -85 / -40 ~ +185 15. Operating humidity rh 85% 16. Dimensions (w+l+h) mm ±+44+56 / 23+23+23 17. Weight 200g / 20g 18. Unobstructed effective range m 100(min) 19. Led continuous working life h 6000
Model No.: TN0284 Focal length: 2.8mm Aperture: 1.4 Mount: CS Format: 1/3-inch Horizontal field of view: 85deg 36" Dimension: 30x39mm Weight: 70g MOD: 0.1m weight: 70g
Cocoa beans, coffee beans, rice, sugar olive oil, metal scrap, a4 paper, pink salt, chemicals, and medical equipment.End to end trading
Dvr2000 series audio 1.Mpeg-4/h.264 video hardware compression; 2.Cif real-time recording, d1 recording not in real time; 3.Code flow reaching from 60m to 200m/h; 4.Installing alarm input/output module; 5.Using the watchdog to avoid the computers halt; 6.Supporting cbr and vbr, 500:1 compression ratio; 7.90 rotation supported
Htedvs/r-h4d stand-alone dvr Htedvs/r-h4d embedded stand-alone dvr has the features of strong network function of htdvs network video server for remote configuration and transmission but mini exterior for flexible installation and of the advantages of htedvs/r embedded stand-alone dvr with rtos realtime operation system and local recording, with mpeg4/h.264 video compression, g.729a audio compression; single-channel audio and 4 channels video input, viewing 4channels non real time video at the same single-channel video and audio output; built-in 2.5 inches hard disk for recording; usb2.0 interface and nas storage mode; 6 alarm interfaces can be set to be inputs or outputs optionally, transparency i/o interfaces as well (aux i/o).
Summarize: St-v8008 digital surveillance system is structured on host computer system. For traditional surveillance devices, you need to set up several surveillance screens, multiprocessor, commutator and video tape recorder, and you need personnel to watch over the locale and change the videotapes etc. In addition, you are able to do all kinds of preview and recording operations, and realize remote view by internet to watch over the locale in time. There are two main parts in av system: video surveillance system and remote view system. Video surveillance system: includes video capture card and software. This system mainly takes charges of instant surveillance and recording. St-v8008 adopt stronger conexant 23881 chip, which is a 10bit adc, compare to 9bitadc, philips 7130 chip, in the terms of qualitytinctorial saturation, it superior to the 9bit adc philips 7130 chip. The four routes 3d dress filter it have, can auto-dispel noise and enhance the quality is 40% higher than the philips 7130. System equipment standard: Specifications: st-v8008 D-tyde: bd15*1 Video inputs: 8 channels Recording rate: 240fps(ntsc), 200fps(pal) Display rate: 240fps(ntsc), 200fps(pal) Video rate: 320*240.352*288sw Compression format: h264 D-tyde:187.30mm*1044.44mm System demand: windows2000xp (cpu)? pentium4 (2.0)(lowest) Memory bank: ram 256mb (lowest) Hardware: hdd 40gb (recommend) Display card: vga, ati, rage 128pro 32mb(lowest) Direct x: 9.0(up grade) Specialty: *support each engine with multi-card, a card for 4 channels, support pal ntsc, all channels can be work noninterferencely by each other at the same time. *support compress currentpreviewcurrentfold yearmonthdayhourminsec, text. And fold the pictures, mosaic also. *support dynamic avi picture pick-up. *support 4 channels recording compress all the time. *provide the function of high -speed ballmiddle speed ballflat roof and alarm linkage.
Embedded 16ch digital video recorder st-9016 embedded 16ch digital video recorder Video input: pal:(625l/f, 25f/ch/s ); ntsc:(525l/f, 30f/ch/s) 16 ch composite video input (bnc, 1.0vp-p75¬+) Video output: pal:(625l/f, 25f/ch/s ); ntsc:(525l/f, 30f/ch/s) 1 ch composite video input (bnc, 1.0vp-p75¬+) 1 ch vga output (frequency 60 hz, resolution 1024f-768 ) Recording rate : pal 25f/ch/s , 625lines;??ntsc 30f/ch/s , 525lines Audio input: 8 ch audio input (rca, 20-100mv, 10k¬+) Audio output: 1 ch audio input (rca, 20-100mv, 1k¬+) Alarm input: 9 ch(n.O/n.C) Alarm output: 4 ch(n.O, relay close output) Compression algorithms: video compression h264: audio compression :g722 Resolution: monitor display(704f-576);? vga output(1024f-768); Audio sample ratio: 8k sample/sec, 16bit/sample dot
The HH-300 portable handheld under vehicle inspection system (UVIS) camera kit has been designed as a lightweight, low-power, handheld man-portable system for straightforward setup and ease of operation - delivering UVIS and UVSS capabilities straight out of the ruggedised case. This HH-300 under vehicle inspection digital camera system is designed for perimeter security, observation posts, dead-space monitoring, patrol line monitoring, border crossings, vehicle entry points or tactical operations entry points for military bases - a significant upgrade from under vehicle inspection mirrors. The HH-300 portable UVIS can also be speedily deployed at remote areas where threat detection and management tools are required urgently. The HH-300 handheld under vehicle inspection system is also configurable as a self-contained lightweight pole camera for inspecting hard to reach or dangerous areas for potential security hazards or breaches. This gold-standard portable UVIS kit includes two types of cameras ? one which is mounted on a dolly for easy access to the underside of vehicles and one which is a flexible pole camera for examining hard to reach areas like above drop-ceilings, inside shipping containers, small cavities or pipe openings, corner views or behind immovable objects.
This mobile phone detection system consists of two sensor poles (Dipole). Each pole has six equally spaced sensors connected to a micro-controller. Detected data are spontaneously wireless transmitted to a Main Controller. Data are further analyzed by the main controller to determine if a mobile phone has passed through these Dipole. When a person walk through the Dipole with a mobile phone, signal strength (above the background noise level) of each detector is displayed on Main Controller's LED panel instantaneously with respect to its position. In the mean time, main controller will sound alarm, active dry contact, or establish wireless or TCP/IP communication with a remote computer depends on customer's preference. Dipole is very lightweight and easy to set up. Since it is a reactive system, dipole does not generate any harmful strong RF driver signal. Dipole and the main Controller consume very low power suitable for non-stop operation. System does not need any operator to monitor like a metal detector. Moreover, Upgraded Idle Standby Phone Walk Through Detector RFD-10PL (TCP/IP Plus) can work with one or multiple IP cameras for remote monitoring and warning. When someone with a phone walks through RFD-10PL cell phone door detector, you will get sound and image alerts quickly. A photo capture pops up to show you who has a phone on our software interface. IP camera's address and time stamp also on the photo. Only the detected photos are stored in the recorded files so you can efficiently find out who have phones without replaying all recorded videos of the IP cameras.
This mobile phone detection system consists of two sensor poles (Dipole). Each pole has six equally spaced sensors connected to a micro-controller. Detected data are spontaneously wireless transmitted to a Main Controller. Data are further analyzed by the main controller to determine if a mobile phone has passed through these Dipole. When a person walk through the Dipole with a mobile phone, signal strength (above the background noise level) of each detector is displayed on Main Controller's LED panel instantaneously with respect to its position. In the mean time, main controller will sound alarm, active dry contact, or establish wireless or TCP/IP communication with a remote computer depends on customer's preference. Dipole is very lightweight and easy to set up. Since it is a reactive system, dipole does not generate any harmful strong RF driver signal. Dipole and the main Controller consume very low power suitable for non-stop operation. System does not need any operator to monitor like a metal detector. Moreover, Upgraded Idle Standby Phone Walk Through Detector RFD-10PL (TCP/IP Plus) can work with one or multiple IP cameras for remote monitoring and warning. When someone with a phone walks through RFD-10PL cell phone door detector, you will get sound and image alerts quickly. A photo capture pops up to show you who has a phone on our software interface. IP camera's address and time stamp also on the photo. Only the detected photos are stored in the recorded files so you can efficiently find out who have phones without replaying all recorded videos of the IP cameras.
