Thermoplastic Polyolefin (TPO) elastomers is a combination of PP and another polyolefin that have been modified to provide better ductility and impact resistance, its ease of processing, lightweight nature, and chemical resistance of PP, TPO compounds can be formulated for increase UV weathering & Scratch resistance when needed Properties Good Dimension Stability High Impact Strength Good Heat Aging Properties Low Density Good Chemical Resistance Good Processability Low Cost Extensive Compounding capabilities Good Recyclability Non-hygroscopic, pre-drying is not necessary Coloured grades available Typical Applications Exterior Automotive parts Bumpers, Bumper Pannels & Parts, Air Intake Ducts, Grilles etc.Interior �¢?? Instrument Pannel, Door Pannel, Control Knobs Industrial products- gasket & seal, weather striping etc. Appliance and housewares Products Sporting goods Personal Care goods Wire and cable Flexible cord, welding cable jacket , automotive wire & cable Health care Specification missing -take from website Specification Hardness Set(ISO 868) (Shore A-D) 50 �??-60 D Density (g/cm3) 0.88 1.12 Compression(Set) Very Good Tensile Set (ISO 527) 10 kg/cm3 - 30 kg/cm3 Tear Set (ISO 34) 30 kg/cm3 - 50 kg/cm3 Elongation Set (ISO 527) (%) 400 - 1000 Working Temp. Max. (C) 100 Working Temp. Min.(C) -40 Adhesion PP/ABS/HIPS/SAN/PC/NYLON Solvent Resistance Medium Motor Oil Resistance Medium Acid-Base Resistance Excellent UV-Ozone Stability Excellent Wide hardness range Does not require vulcanisation-quire higher saving on the processing costs Remains flexible at low temperatures High temperature resistance Electrical insulator with very low conductivity Has grades with very low compression set Grades having excellent abrasion resistance Excellent tear resistance 100% recyclable PVC free Resistance to solvents Resistance to oil Resistance to acids bases and detergents Resistance to UV and ozone Resistance to bacterial and fungus growth Has low toxic potential, with many grades conforming with FDA regulations Halogen free flame retardancy (VO-V1-V2) Colored grades available Allows direct colouring during processing by utilizing PP or PE based color 2-shot molding onto wide range of plasics Suitable for co-extrusion process
High quality Alkyl Dimthyl Amine Oxide 30% CAS 70592-80-2 Used directly to formulate detergents for household and industry use,used as raw material to produce kinds of detergent, emulsion. 1) Used as efficient emulsifying agent for polymerizing pressure sensitive adhesive. Dosage: 1â?¼0.1% 2) As the main content of highclass detergent and cleaner, it can blench, remove stains and oil and resist static electricity. 3) Used as the antistatic additive with cleaning function for textile oil. 4) Used as efficient antistatic agent for polyester substrate and film base, especially for polyester base cinefilm and filmstrip. Dosage: 0.5% or so. 5) Used as the antistatic agent for polyolefine, polyester and other polymer materials. 6) Used as the antihygroscopic and anticaking additives for powdered chemical products that are easy to absorb moisture and agglomerate. 7) Used as good degreasant for quality leathers.
Physical Chemical Properties Chemical Name 1112Tetrafluoroethane Molecular Formula CH2FCF3 Molecular Weight 10202 gmol Boiling Point 262C 151F Vapor Pressure 5915 hPa at 211C Density 12 gcm Water Solubility 15 gL Westron R134A is a highly effective nontoxic nonflammable and energyefficient refrigerant designed to meet modern environmental standards It offers zero ozone depletion potential ODP making it a safer alternative to older refrigerants like CFCs and HCFCs Key applications include Automobile air conditioning Residential commercial and industrial cooling Mediumtemperature refrigeration Food processing and storage Transport refrigeration Hightemperature heat pumps Environmental Benefits Zero ODP ensures it doesnt harm the ozone layer Lower GWP compared to other refrigerants making it a more ecofriendly choice Lubrication Compatibility POE Polyolester and PAG Poly Alkylene Glycol oils work well with R134A especially in automotive air conditioning systems Mineral Oil and Alkyl Benzene lubricants are incompatible with R134A Note POE and PAG oils absorb moisture quickly so proper handling is essential to avoid prolonged exposure to air
Gas R410A 11.3 kg in Rechargeable Cylinder The rechargeable cylinder is included in the price and remains your property. R410A is the internationally preferred solution for new air-conditioning systems, heat pumps, and similar applications. Unlike R-22, R410A operates at much higher pressures and is compatible exclusively with POE synthetic oil. A major advantage of R410A is its significantly higher cooling capacity up to 50% more than R-22 allowing for smaller, more compact system components. It is important to note that components such as copper pipes, valves, and compressors must be designed to withstand the higher pressures of R410A. Due to these higher operating pressures, R410A is not suitable for retrofitting existing systems that use R-22. For such conversions, R-424A or R-407C are recommended as direct substitutes. Key Features: Ozone-friendly with ODP = 0 Exclusively compatible with POE synthetic oils Can be recharged in the event of leaks Higher cooling capacity and working pressure than R-22 GWP (Global Warming Potential): 2088 Boiling Point (at 1.013 bar): -51.58C Glide (temperature range): 0.1C Saturated Vapor Density at 25C: 61.5 kg/m UN Number: 1078 Safety Classification: A1 (Low toxicity, non-flammable) Must be loaded in the liquid phase
ASHRAE Number: R-454B Refrigerant Class: A2L Type: Zeotropic blend Typical Lubricant: Polyolester (POE) Replaces: R-410A Chemical Formula: R-1234yf / R-32 (31.1% / 69.9%) Lower Flammability Limit (LFL): 0.303 kg/m Description: Solstice 454B is a low global warming potential (GWP) refrigerant designed as a replacement for R-410A in residential and commercial air conditioning systems. This zeotropic blend combines R-1234yf and R-32, making it an environmentally friendly alternative that complies with current regulations while providing efficient cooling performance.
This product is one of the few kinds of antioxidant, which is non-toxic, tasteless, light colored. Widely apply in each kind of elastomer. It can be used in polyethylene, polypropylene, polyvinyl chloride and other plastic masterbatch. It may use as the urethane foam as well as the electric wire, the electric cable, packaging material for food, the adhesive antioxidant, especially for heat-resisting , lightfastness, ageing resistance in the neoprene colored cable sheath, antioxidant KY-445 is are remarkable. It can use as lightfastness and ageing resistance antioxidant in the polyether and foam, and also as lubricant antioxidant. It's specially effective to protect neoprene, polyacrylate rubber, polyether polyol and so on from ageing resistance because of high fever, light and some other factors. It has good cooperative effect with the sulf-antioxidant.
ASHRAE Number: R-515B Class: A1 Refrigerant Type: Azeotropic blend Typical Lubricant: Polyolester (POE) Replaces: R-134a, R-227ea, R-124 Chemical Formula: R-1234ze / R-227ea (91.1% / 8.9%) Lower Flammability Limit (LFL): Non-flammable Description: Solstice N15 (R-515B) is a non-flammable azeotropic blend designed for use in chillers, heat pumps, and high-ambient air conditioning systems. It features a Global Warming Potential (GWP) of 293 according to the 4th IPCC assessment, making it a more environmentally friendly option compared to many traditional refrigerants. This hydrofluoroolefin (HFO) blend not only provides significant environmental benefits but also aligns with performance standards for new systems. Its design closely resembles R-1234ze, allowing for a long-term solution compatible with both A1 and A2L refrigerants.
Product Name Diphenylacetonitrile / Benzene-acetonitrile, alpha-phenyl CAS NO. 86-29-3 Appearance Colorless Liquid Purity 99% Density 1.1061 Melting Point 71-73 �°C Boiling Point 181 �°C/12 mmHg Flash Point 120 �°C Refractive Index 1.5850 Vapor Pressure 21.3 hPa (190 �°C) Acidity Coefficient (pKa) 9.30�±0.10 Application Chemical raw materials;Amines Usage 1. It can be used as a herbicide, used for turf prevention and control of young grasses before germination, used for synthesizing isocyanates, and further prepared into UV coatings, PU paints, transparent elastomers and adhesives, etc. 2. Used in polyamide and epoxy resin industries Use as an intermediate in organic synthesis. 3. In medicine, it is used to produce gastric amine, phenethylpiperidine, and other drugs such as pain relief. Storage Keep in dark place,Inert atmosphere
Hot sale Toluene Dissocyanate/TDI Toluene diisocyanate (TDI) is an aromatic diisocyanate that is a clear, pale yellow liquid with a sharp, pungent odor, which is insoluble in water and miscible with most common organic solvents. TDI (CAS No. 26471-62-5) consists of two isomers: toluene-2,4-diisocyanate (2,4-TDI) (CAS No. 584- 84-9) and toluene-2,6-diisocyanate (2,6-TDI) (CAS No. 91- 08-7), which is commercially produced in different ratios. The most common ratio is 80% 2,4-TDI/20% 2,6 TDI. TDI is widely used and accounted for 34% of the global isocyanate market in 2000 Tdi 80/20 is used for Flexible Polyurethane Foam and other other polyurethane applications including elastomers,synthetic leather,coated fabrics,paints and adhesives. It is spray-applied,closed-cell polyurethane foam system with high fire resistance properties.it applies to all kinds of spray-applied thermal insulation engineering,such as building exterior cold rooms,large-scale pipeline,etc.
Freon M059 R-417A Refrigerant Gas 25lb / 11.9 kg US Origin Chemours ISCEON MO59 (R417A) is an HFC retrofit refrigerant that is cost-effective and ozone-friendly, used to retrofit equipment that uses R22, such as air conditioning (AC) and medium-temperature commercial refrigeration systems. Applications: Residential and commercial air conditioning systems. Note: For water-cooled systems, MO29 is recommended. Medium temperature refrigeration, commonly used in commercial units, including food service, supermarket display cases, and food storage/processing. Benefits: Efficient and cost-effective retrofits. Ozone-friendly, does not harm the ozone layer. In most cases, no need to change lubricant type during the retrofit process; compatible with traditional and new lubricants. No need to replace existing equipment. After the retrofit, MO59 can be topped off without needing to drain the refrigerant. Advantages: Lower discharge temperatures compared to R22, which can extend compressor life. Provides the necessary cooling capacity in most systems. Proven to save energy in some systems. MO59 is an ozone-depleting substance (ODS) with zero ODP (Ozone Depletion Potential) and is not subject to phase-out under Montreal Protocol regulations. Recommended lubricants: Mineral Oil (MO), Alkylbenzene (AB), and Polyol Ester (POE) in most cases, no lubricant change is required during the retrofit process.
Forane 407C is a hydrofluorocarbon HFC refrigerant blend of HFC32 difluoromethane HFC125 pentafluoroethane and HFC134a 1112tetrafluoroethane designed as a substitute for R22 in air conditioning and refrigeration systems Its environmental advantage is that it does not harm the ozone layer making it a suitable alternative for new or existing R22 systems Key Features Compatibility Suitable for use in both residential and commercial air conditioning systems and nonflooded evaporator chillers When converting R22 systems to Forane 407C its essential to switch to POE oil from mineral oil High Glide Forane 407C has a high glide which may affect its performance particularly in flooded evaporators Ozone Friendly It doesnt deplete the ozone layer offering an environmentally friendly replacement for R22 Composition HFC32 230 nominal 20 HFC125 250 nominal 20 HFC134a 520 nominal 20 Specifications Moisture H2O 10 ppm by weight Acidity as HCl 10 ppm by weight Air NonCondensables 15 Volatile Impurities 05 Chloride Pass no visible turbidity ParticulatesSolids Pass visually clean WHOLESALE PRICES PLEASE INQUIRY FOR MORE DETAILS AND TECHNICAL SPECIFICATION
Polysorbate 20 USP/NF is a polysorbate-type nonionic surfactant used in many commercial and household products. It is composed of 20 repeated units of polyethylene glycol via ethoxylation. Polysorbate 20 USP/NF is a wetting agent, as well as washing agent, stabilizer and solubilizer in food products, laboratory assays and industrial applications. It is also an excipient that stabilizes emulsions and suspensions and lubricant in ophthalmic solutions. Polysorbate 20 USP/NF is used by philatelists to remove stamps from envelopes and to remove residues from stamps, without harming the stamp itself. Polysorbate 20 USP/NF is also used as wetting agent in rubber balers in the elastomer industry. Polysorbate 20 has been used as a shape directing agent to synthesize spheroidal magnetite nanoassemblies. USPâ??NF is a combination of two compendia, the United States Pharmacopeia (USP) and the National Formulary (NF). Specifications Appearance: Oily, yellow to brownish-yellow, clear or slightly opalescent liquid Solubility: Soluble in water, in ethanol, in ethyl acetate & in methanol; practically insoluble in fatty oils and in liquid paraffin Relative Density: About 1.10 Viscosity @ 25oC: ~ 400 Identification: A) By IR: Should comply with the test for IR B) Test for hydroxyl value: Should comply with the test for hydroxyl value C) Test for saponification value: Should comply with the test for saponification value D) Test for composition of fatty acids: Should comply with the test for composition of fatty acids E) Chemical test: The solution should become blue Acid Value (mgKOH/g): 2.0 Max Hydroxyl Value (mgKOH/g): Between 96 and 108 Peroxide Value (meq/kg): 10 Max Saponification Value (mgKOH/g): Between 40 and 50 Composition of fatty acid (fraction of the substance) a) Caproic Acid: 1.00 % Max b) Caprylic Acid: 10.00 % Max c) Capric Acid: 10.00 % Max d) Lauric Acid: Between 40.00 % and 60.00 % e) Myristic Acid: Between 14.00 % and 25.00 % f) Palmitic Acid: Between 7.00 % and 15.00 % g) Stearic Acid: 7.00 % Max h) Oleic Acid: 11.00 % Max i) Linoleic Acid: 3.00 % Max Ethylene Oxide & Dioxane a) Ethylene Oxide: 1 ppm Max b) Dioxane: 10 ppm Max Water: Between 0 and 3.00 % Total ash: Not more than 0.25 % Packing 485 lb drum, 4 drums per pallet
CAS Number: 8001-79-4 Castor oil is obtained from the fruit seed of castor (Ricinus communis L.) a large shrub that grows mainly in India, Brazil and China. The seed has an oil content of 40-50%. The quality manly used is first pressed, known as fist special grade (FSG), it is a light-colored liquid, yellowish, with a characteristic odour and high viscosity. It is the only oil containing fatty acid ricinoleic characterized by the presence of an OH group (more than 80%) which gives rise to the properties that make castor an exclusive oil. Moreover the high reactivity of the OH group (hydroxyl) leads to a high range of products such as dehydrated castor oil, hydrogenated castor oil, 12-hydroxystearic acid, sebacic acid, ricinoleic acid. This is an oil wit flexibility and ductility and It is mainly used for the manufacturer of industrial resins, plastics, elastomers, dielectric, rubber products in general.
CAS Number: 8001-79-4 Castor oil is obtained from the fruit seed of castor (Ricinus communis L.) a large shrub that grows mainly in India, Brazil and China. The seed has an oil content of 40-50%. The quality manly used is first pressed, known as fist special grade (FSG), it is a light-colored liquid, yellowish, with a characteristic odour and high viscosity. It is the only oil containing fatty acid ricinoleic characterized by the presence of an OH group (more than 80%) which gives rise to the properties that make castor an exclusive oil. Moreover the high reactivity of the OH group (hydroxyl) leads to a high range of products such as dehydrated castor oil, hydrogenated castor oil, 12-hydroxystearic acid, sebacic acid, ricinoleic acid. This is an oil wit flexibility and ductility for the manufacturer of industrial resins, plastics, elastomers, dielectric, rubber products in general.
Available Height: 400, 500, 600 mm & Length: 1,000 - 3,500 mm Rubber V Fenders are the ultimate solution for protecting your vessel from the harsh impact of docking. Made from high-quality rubber, with their unique V-shaped design, Rubber V Fenders provide maximum protection against even the most severe impacts. They are easy to install and can be customized to suit with your needs. Our V-Fender is designed to withstand the toughest conditions and ensure maximum protection for your vessel. Choose our Rubber V-Fender for your docking needs today!
Reclaim rubber has shown to be a reliable and affordable alternative to synthetic and natural rubber. It is manufactured using a de-vulcanization process, which recycles rubber from spare parts and scrap rubber items like auto tires, which work as basic material in the process. Our reclaimed rubbers are ready stock in four (4) different qualities, which are Platinum, Standard, Premium, and Ecco. Pick the best suit to your needs!
We produce a high quality rubber product made from natural and synthetic rubber materials and our factory has been certified for ISO 9001:2015. Our products comply with well known International Standard as American and Standard quality which has been tested by Our rubber sheet available with - Thickness Start: from ONE (1) MM - Maximum Wide: from TWO (2) Meter - THREE point ONE (3.1) Meter. - Material: Natural Rubber, SBR, EPDM, Neoprene, NBR. Our product range as follows: - Rubber Sheet. - Rubber for industrial products (Gasket, Lining, Rail Pad, Roller, etc). - Rubber Flooring. - Rubber Gym Mat, Sports courts and playground/park. - Rubber for public transportation and public facility (Fender, Anti-fatique, etc).
we have POE packed in 25kg bags or jumbo bags. MFI 1-4, density 0.88-0.91
CPI-4628-68 is formulated with high quality synthetic polyalphaolefi n (PAO) basestock, combined with our patented seal swell technology. This lubricant features enhanced oxidation stability and a low pour point, allowing it to operate over a wide range of temperatures. The oil has low volatility, enabling decreased maintenance and significantly reduced lubricant consumption. Our patented seal swell technology minimized ammonia leaks due to poor elastomer performance. CPI-4628-68 is particularly suited for use in ammonia compressors with evaporator temps below -39C. Applications and Compressor Type Ammonia compressors Process gas rotary screw Process gas reciprocating compressors Features and Benefits Patented seal swell technology Minimize ammonia leaks Mineral oil compatible Easier change-over Oxidatively stable Longer system life Low carry-over Improves evaporator efficiency Corrosion protection Enhanced system reliability and reduced downtime Very low pour point Reduced efficiency loss and easier removal of the oil Low volatility Reduced maintenance, reduced top-up Test Procedure ASTM Method Typical Viscosity @ 40 C, cSt ASTM D445 59.1 Viscosity @ 100 C, cSt ASTM D445 9.1 Viscosity Index ASTM D2270 131 Density, g/mL, 20 C ASTM D4052 0.84 Pour Point ( C) ASTM D97 -54 Flash Point, C.O.C., ( C) ASTM D92 266 Fire Point, C.O.C., ( C) ASTM D92 282
CPI-1008-68 is formulated with high-quality hydrotreated mineral oil, combined with an excellent performance additive package that includes patented seal swell technology. This lubricant features enhanced oxidation stability and pour point depressant, allowing it to operate over a wide range of temperatures. The oil has low volatility, enabling decreased maintenance and signifi cantly reduced lubricant consumption. Our patented seal swell technology minimizes leaks due to poor elastomer performance. CPI-1008-68 is particularly suited for use in ammonia compressors with evaporator temps greater than -39C. Applications and Compressor Type Ammonia compressors Process gas rotary screw Process gas reciprocating compressors Features and Benefits Patented seal swell technology Minimize ammonia system leaks Oxidatively stable Longer system life Low carry-over Improves evaporator efficiency Corrosion protection Enhanced system reliability and reduced down-time Low pour point Easier removal of the oil Low volatility Reduced maintenance, reduced top-up Test Procedure ASTM Method Typical Viscosity @ 40C, cSt ASTM D445 68 Viscosity @ 100C, cSt ASTM D445 8.9 Viscosity Index ASTM D2270 111 Density, g/mL, 20C ASTM D4052 0.88 Pour Point (C) ASTM D97 -39 Flash Point, C.O.C., (C) ASTM D92 240 Fire Point, C.O.C., (C) ASTM D92 268
![Bis[4-(2-phenyl-2-propyl)phenyl]amine](https://didwblovvwmoz.cloudfront.net/product_images/4127346/1748733/compressed/featured_image/3bb27e53c442d8830d35fd1f0d70_900_900.jpeg?format=webp)
