ASME Standard Spiral Wound Gasket,Spiral Wound Gaskets
DIN Standard Spiral Wound Gasket,Spiral Wound Gaskets ur
Spiral Wound Gasket For Heat Shield,Spiral Wound
JIS Standard Spiral Wound Gasket,Spiral Wound Gaskets
Product Information: Description: GOT Kammprofile gasket , generally processed to be concentric groove in the two faces of the stainless steel flat gasket by precise lathes. According to the different medium, w can choose flexible graphite, PTFE, non-asbestos, or other soft metal, to sick to the two faces of the gasket. It can directly be used without sealing layer, and the effect is good. But under the high pressure occasion, it will be easy to do damage to the surface of the flange. 410 basic type Kammprofile gasket 410L Kammprofile gasket with outer ring (integral type) 410LM Kammprofile gasket with outer ring (split type) Model 410LM split type Metal toothed gasket with outer ring, can choose richer metal, e.g. carbon steel, as the outer ring, and the outer ring thickness can be 1.5mm, more flexible and economic than the integral type 410L, and the lining metal can be repeatedly used. Product application: GOT toothed combination gasket is the first choice gasket under relatively low preload power, the soft surface of the sealing layer can avoid the direct touch between metal and metal, which is combined reliably and compactly, to protect the metal flange from damaged, even under extremely high load. The toothed combination gasket is especially suitable for the flange connection in thermal exchanger, container, and reaction vessel under high temperature, high pressure, and the working condition altering occasions. It is an ideal substitution for traditional metal jacketed gasket. Operating pressure range: 6.4~25Mpa Selectable material: Metal material German trademark Hardness Temperature íµ Density g/cm3 Thichness mm Carbon Steel 1.1003/1.0038 90~120 -60~500 7.85 2 3 4 SS304, SS304L 1.4301/1.4306 130~180 -250~550 7.9 SS316, SS316L 1.4401/1.4404 130~180 -250~550 7.9 Other metal on require Overlaying material: Flexible graphite, asbestos plate, non-asbestos plate; PTFE, mica plate, lead, etc. Generally the thickness of the dual overlaying is 0.5mm
Product Information: Description: GOT Kammprofile gasket , generally processed to be concentric groove in the two faces of the stainless steel flat gasket by precise lathes. According to the different medium, w can choose flexible graphite, PTFE, non-asbestos, or other soft metal, to sick to the two faces of the gasket. It can directly be used without sealing layer, and the effect is good. But under the high pressure occasion, it will be easy to do damage to the surface of the flange. 410 basic type Kammprofile gasket 410L Kammprofile gasket with outer ring (integral type) 410LM Kammprofile gasket with outer ring (split type) Model 410LM split type Metal toothed gasket with outer ring, can choose richer metal, e.g. carbon steel, as the outer ring, and the outer ring thickness can be 1.5mm, more flexible and economic than the integral type 410L, and the lining metal can be repeatedly used. Product application: GOT toothed combination gasket is the first choice gasket under relatively low preload power, the soft surface of the sealing layer can avoid the direct touch between metal and metal, which is combined reliably and compactly, to protect the metal flange from damaged, even under extremely high load. The toothed combination gasket is especially suitable for the flange connection in thermal exchanger, container, and reaction vessel under high temperature, high pressure, and the working condition altering occasions. It is an ideal substitution for traditional metal jacketed gasket. Operating pressure range: 6.4~25Mpa Selectable material: Metal material German trademark Hardness Temperature íµ Density g/cm3 Thichness mm Carbon Steel 1.1003/1.0038 90~120 -60~500 7.85 2 3 4 SS304, SS304L 1.4301/1.4306 130~180 -250~550 7.9 SS316, SS316L 1.4401/1.4404 130~180 -250~550 7.9 Other metal on require Overlaying material: Flexible graphite, asbestos plate, non-asbestos plate; PTFE, mica plate, lead, etc. Generally the thickness of the dual overlaying is 0.5mm
Inner and outer ring of swg Got-400r metal flat gasket can also be processed into the inner and outer ring of the spiral wound gasket. We will punch the gasket that with the size smaller than 8fª by punching machine, and for the one that with large size by lathe. If for the expensive material as ss304, ss316, etc. As long as the sealing plane is not over wide, we will basically use the special ring rolling machine, process by the wire rod, to largely cut cost. The carbon steel outer ring can be coated with zn, white zn, or paint-drying, and the typing will be according to the standards or the demands. Product structure: The metal interface flat gasket, choose kinds of solid metal, mechanically cut and processed into kinds of metal sealing gaskets by high precision nc lathe, suitable for the sealing parts of pressure container, valve, cylinder head with high temperature, high pressure, and strong corrosion. General characteristic is installation area small and preload pressure high. Got-400r metal flat gasket can also be processed into the inner and outer ring of the spiral wound gasket. Got self design and manufacture the ring processing special equipment, outer ring trench cutter, and inner ring chamfering machine. Comparing with the traditional lathe, it is high efficient, low cost, and need no special fixture. Inventory product: Size: Asme b 16.20 1/2fª ~ 24fª 150lb, 300lb, 600lb, 900lb Other sizes or standards on require. Material: Carbon steel, zinc plating, or without zinc plating Ss304, ss304l, ss316, ss316l The following special material on require: Ss321, ss317l, duplex 31803, Ti, ni, inconel, monel, hastelloy, and zr, etc
Reinforced (non-)asbestos beater sheet Got-633 is made of 633-1 non-asbestos beater sheet inner lined with metal truss plate (generally the carbon steel with 0.2~0.25mm thickness). It is extensively applied in manufacturing various automobile and motor gaskets. It is an ideal material that will substitute the traditional asbestos gaskets. The product has excellent performance in self expansion, high resilience and long lifespan, etc. Mainly applied in automobile farming machine, motorcycle and engineering etc., it is also can be used in high strength gaskets and cylinder gaskets etc. Product structure: Got-633 truss plate reinforced asbestos beater sheet If stored for a long time, the asbestos will have certain corrosion to the inner lined metal.
Spiral Wound Gasket (SWG) consists of a thin metallic strip and a soft non-metallic filler that are simultaneously wound on a rotating mandrel. The metal hoop is pre-formed with a V or W shaped profile, which allows the gasket to act as a spring between the flanges. Further, the hoop provides the basic structural element for the gasket while the non-metal filler material seals small imperfections on the flange surfaces. Depend on its excellent compression resilient, ití»s suitable for sealing spots where the alteration of temperature and pressure are frequent, such as pipes, valve, pumps etc. They are available in all standard the flanges of sizes, e.g. ANSI ú¼API ú¼DINú¼JISú¼JPIú¼BS etc. (Pressureí_25Mpa) Style Construction Flange Hoop material Filler Inner & outer material Size (mm) Thickness (mm) Material Code V W 6000 Basic type Tongue and Groove 304(L),316(L) Nickel Mon400 Inconel etc. Asbestos Graphite PTFE Mica Ceramic ASB FG PTFE MICA CER Carbon steel 304(L)íó321 316(L)íóTa Nickel,Mon400 Inconel etc. ª+16~3000 3.2 4.5 6.5 4.8 5.5
Ring joint gaskets r type,rx and bx spiral wound gaskets and all metallic gaskets.
Pularin: Foot ball shaped 60 atoms of carbon at edges is layed in pularin.Pularin atoms are arranged in ball. Each atom is called Bucky balls and tubes are called Bucky tubes or Nano tubes.Each nano tube is 1 to 7 nm diameter i.e 1nm=50000 part of a hair sting. where? 1)mangampet ,cuddapah dist.Ap,India.app 800 ppm(parts prer million)info given by stanford University. Cost: 150 times costlier than gold. 10 grams pularin $23000 to $45000 also info given by Bucky-USA website. Special uses if this becomes common: 1)Pularin coting on aeroplanes withstands from thunders ,rains ,Flashes etc. 2)Bullet proof ackets 3)curing cancer etc.
Electro galvanized wire BWG20 , wire diameter: 0.93-0.95 mm.
- Material : Solid SS304, SS316, SS316L ( also available in some models with hollow tube) - Shape at top of the spigot: Round/dome top or slopped as shown in the picture) - Also available in Square shape - Spigot no hole in the glass panel. - Spigot with base plate and cover ring - Dimensions: 48 x 155mm, 48*220mm, 48*300mm with base plate. - include the black gasket and stainless steel insert - Mirror polished or satin stainless steel.
1> Back To Back Towel Bars(with and without metal washers) 2> Pull handled available in various sizes with back to back Towel bars 3> Glass thickness : 6 mm~12 mm 4> Size: 19 x 6"/8"/10/12"/18"/24" C/C 5> Material :304 Stainless Steel / #62 Brass Tubular 6> Chrome plated, Brushed Nickel, Brass Polished, Polished Chrome, Gold Plated, Oil Rubbed Bronze.
Metal Spiral Wound Gaskets, Ptfe Gaskets, Packings, Rubber Seals..
Bonny light crude oil (blco), yemen light crude oil, jet fuel, diesel d2, d6, mazut, base oil, gasoline, cocoa bean and powder, petroleum products, coal, diesel, bitumen, petcoke, aluminum, hms, charcoal, wheat, sugar, milk, soybean, corn, beef, chicken, flour, meal, rye, frozen vegetable, okra, french fries, etc..Procurement, exporter
Spiral wound gaskets, ring joint gaskets, metal gaskets, rubber gaskets.
Iron oxide, zinc product, aluminum, rutile, ilmenite, struverite, monazite, etc.
We deal in Metallic Gasket, Non Metallic Gasket, Composite Gasket, Envelope Gasket (Double Jacketed Gaskets), Flat Metal Gaskets, Non-Asbestos Sheet Material Gaskets, Ring Type Joint, Kammprofile Gasket, Spiral Wound Gaskets, Spiral Wound Gaskets: Sheet Gaskets, Ring Joint Gaskets, Ring Joint Gaskets, Camprofile Gaskets, Metal Jacketed Gaskets, Rubber Gaskets, Cork Gaskets, PTFE Gaskets (Teflon Gaskets), Non-Asbestos Gaskets, Non-Asbestos Gaskets, Pipe Flange Gaskets, Corrugated Metal Gaskets, Corrugated Metal Gaskets, Compression Gaskets O-Ring Gaskets Sheet Gaskets . Spiral Wound Gaskets Metallic Gaskets Rubber Gaskets PTFE (Teflon) Gaskets Cork Gaskets Graphite Gaskets Asbestos-Free Gaskets
We are leadding manufactrer and exporter of Brass and Metal swival ball joint.
