Main parameter:
Capacity(flow rate): 86.4-198 m3/h
Head: 9-52 meter
Rate speed: 1000-2200 r/min
Impeller diameter: 245 mm
1. Application:
Mh series of slurry pump is a kind of cantilever centrifugal slurry pump, widely applied for pumping high abrasive and erosive slurry in thermal power generation, chemical, mining, coal mining, metallurgy, environmental protection.
2. Sealing type of slurry pump:
Shaft sealing use packing seal, associated-impeller seal and mechanical seal, can be applied for different work condition requirements.
3. Structure of slurry pump:
Use double shell structure, the pump body, pump cover be lined with replaceable wear-resistant metal liner or rubber liner. The pump press out opening can be rotary mounting according to eight angle to meet different installation requirements.
Meanings of the model: mh75c
M---------wear-resistant high chromium alloy
H---------heavy type slurry pump
75------- the pump press out opening is 75 mm
C -------bracket style
We are one of the concrete pump manufacturers in Korea
Brand: SAMIL GIANT in Korea
Boom length: 67m 62m 58m 52m 48m 45m 42m 37m 32m 28m 24m 21m
Stationary pump, Line pump
We are able to send full details if you make an inquiry
Zidong horizontal slurry pump, centrifugal, double casing structure, international quality, warman replacement pump.
It is specially designed to convey solid-liquid mixtures containing high concentration, corrosive and abrasive, hard solid particles, such as: ore slurry, ash, slurry, gravel, etc. It is widely used in mining, metallurgy, power plant, chemical industry, etc.
ZH(R) Slurry pump overview:
1. Unique wear-resistant design (structure, material), long service life of wetted parts.
2. Wide range of performance, less NPSH, high operational efficiency, and energy-saving.
3. Optional combination of wetted parts of different materials to meet different working conditions.
4. High price/performance ratio, easy maintenance and services.
5. Available for multi-stage installation for long distance transfer.
6. Various installtion forms to meet different site installation conditions and customers' requirements providing pump models selections for clients.
ZH(R) Slurry pump application:
The ZH(R) series centrifugal horizontal slurry Pu mp is the pump for highly abrasive/dense slurries in processes from cyclone feed to regrind, mill discharge, flotation, mine drainage and tailing in minerals plants plus other industrial applications, Sometimes, it could also be used in dredging of settling lagoons and pumping of drilling mud etc
FAQ
Q1. What is your product range?
Centrifugal pump, slurry pump, gravel pump, dredge pump, clean water pump, sewage pump, chemical pump, etc.
Q2. What should we know if you want to get a quotation?
Pump capacity, pump head, medium, medium temperature, pump material, quantity.
If possible, please also provide the pump model you are using now, price will be calculated as per the pump model.
If not, we will recommend relevant product for reference.
Q3. What are your advantages about pumps?
Passed CE&ISO, strictly material inspection before and after stove and stable customers in Europe,
Australia, America, Singarpore, etc.
Q4. How to control the quality
Each pump will be tested before delivery;
Third party -such as SGS,etc. Inspection;
100% back your payment if our pump not qualified due to our fault
Wzj model for the single-stage, single-suction, cantilevered horizontal centrifugal slurry pump, this series pump adopt international advanced solid-liquid two-phase flow theory, according to the principle of minimum loss design. The over-current components geometry conforms to the flow of the medium, to reduce the eddy current and impact, so as to reduce the flow components of wear, improved the hydraulic efficiency, reduce the running noise and vibration;
Product name THM-3C slurry pump
Type THM
pump size 4/3
Capacity 86.4-198m3/h
Head 9-52m
Allowable Max. Power 30kw
Speed 1000-2200r/min
NPSH 4-6m
Introduction
Model Explanation and Performance Chart:
THM-3C
T: Tower pump
H: High Concentration
M: Metal lined
3: Discharge size (inch)
C: Frame type with maximum power
Introduction of Slurry Pump ---- THM Series
THM Series slurry pump is mainly used for handing strong abrasive, high density slurries and low density, high head slurries in the metallurgical, mining, coal, power, building material and other industrial departments etc.
The features of this kind of slurry pump
The frame plates of this kind of slurry pump have replaceable wear-resistant metal liners. The impellers are made of wear-resistant metal. The frame plate liner and impeller for THM pump are adoptable of hard metal only.
Bearing assembly of this kind of slurry pump use cylindrical structure, adjusting the space between impeller and front liner easily, being removed completely when being repaired. Bearing assembly use grease lubrication.
The shaft seal of this kind of slurry pump could use the packing seal, expeller seal and mechanical seal. The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications.
Here are the drive types, such as V belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices.
Wide performance, good NPSH and high efficiency are main character of these kinds of slurry pump. The pump of this type may be installed in multistage series to meet the delivery for long distance.
Main application of this kind of slurry pump
This kind of slurry pump mainly applies in coal washer processing, handling with the fine ore and tailings in metal mine, handing combined bottom and fly ash in a thermal power station etc.
Tobee L Light Duty Slurry Pumps have been developed for continuous use in slurry applications where low to medium developed head is required, designed for lighter slurry densities up to 1,35. Shares proven unique design features with the AH slurry pump range, A key feature is the light duty high efficiency impeller, engineered with the latest hydraulic and wear technologies for high efficiency and increased wear life. With a range of high quality parts and different material combinations the L Light duty slurry pump has the versatility to ensure the most appropriate pumping solution provided for any given application.
Design Features:
Heavy duty construction with through-bolt design provides ease of maintenance and minimal downtime.
Ductile iron fully lined casing provides durability, strength, safety, and long service life.
Large diameter, slow turning, high efficiency impellers designed to achieve maximum wear life and low operating costs.
Large, open internal passages designed to reduce internal velocities, maximize wear life and lower operating costs.
Thick elastomer or alloy bolt-in liners provide superior corrosion resistance plus offer ease of liner change-out and interchangeability to reduce overall maintenance costs and maximize wear life.
Designed for rugged duties while offering excellent efficiencies.
Minimal shaft/impeller overhang reduces shaft deflection and increases packing life.
Cartridge-style bearing assembly allows for maintenance in a clean environment without removal of the pump, resulting in reliable operation and prolonged bearing life.
Grease or oil lubrication bearing assembly options offer ease of maintenance and reduced downtime.
Full flush gland, low flow, and dry running centrifugal seals reduce flush water usage minimizing pump operating costs.
Mechanical seals reduce flush water usage, minimizing pump operating costs.
200SV-SP vertical spindle sump slurry pump is designed for applications requiring greater reliability and durability than conventional vertical process pumps can offer. Fully elastomer lined or hard metal fitted. No submerged bearings or packing. High capacity double suction design. Optional recessed impeller and suction agitator available.
Mainly SP Metal Lined Vertical Sump Pump Parts:
Impeller - Double suction impellers (top and bottom entry) induce low axial bearing loads and have heavy deep vanes for maximum wear resistance and for handling large solids. Wear resistant alloys, polyurethane and moulded elastomer impellers are interchangeable. The impeller is adjusted axially within the casting during assembly by external shims under the bearing housing feet. No further adjustment is necessary.
Bearing Assembly - The bearings, shaft and housing are generously proportioned to avoid problems associated with the operation of cantilevered shafts in the first critical speed zones.
The assembly is grease lubricated and sealed by labyrinths; the upper is grease purged and the lower protected by a special flinger. The upper or drive end bearing is a parallel roller type whilst the lower bearing is a double taper roller with preset end float. This high performance bearing arrangement and robust shaft eliminates the need for a lower submerged bearing.
Column Assembly - Completely fabricated from mild steel.
G refers to submerged depth 1200mm;
J refers to submerged depth 1500mm;
L refers to submerged depth 1800mm;
M refers to submerged depth 2000mm;
Q refers to submerged depth 2400mm;
Casing - Has a simple bolt-on attachment to the base of the column. It is manufactured from a wear resistant alloy for the SP and from moulded elastomer for the SPR.
Upper Strainer - Snap in elastomer strainers fit in column openings to prevent overly large particles and unwanted refuse from entering casing of the pump. Lower Strainer - Bolt-on cast strainers on the metal pump and molded snap-on elastomer strainers on the rubber pumps protect the pump from oversize particles.
Discharge Pipe - Metal for SP, elastomer covered for SPR. All wetted metal parts are completely rust protected.
Fully Cantilevered - Eliminates submerged bearings, packing, lip seals, and mechanical seals that other vertical slurry pumps typically require.
Agitation - An external agitator spray connection arrangement can be fitted to the pump as an option. Alternatively, a mechanical agitator is fitted to an extended shaft protruding from the impeller eye.
Materials - Pumps can be manufactured in abrasive and corrosive resistant materials.
Hydroman Electric Submersible Slurry Pump in Stainless Steel for Acid Mine also known as stainless steel submersible slurry pump are designed to provide the mining and industrial processing markets with unparalleled resistance to corrosion and abrasion, polluted water in the sea or the rivers also requires these stainless steel submersible pumps. Hydroman submersible stainless steel slurry pump is an extremely durable, top-discharge slurry submersible pump with a mechanical agitator and wide clearances. This submersible slurry pump uses the pumped liquid to cool the motor. The pumping components of the submersible sea water sand pump, notably the agitator, impeller and wear plate are constructed of stainless steel, meaning the submersible sand slurry pump is designed to be a solid workhorse in any condition.
Hydroman Electric Submersible Slurry Pump in Stainless Steel for Acid Mine Features
Best structure design of submersible sand pump, has a dry motor, IP68, double mechanical seals, equipped with an auto-cut protection, pump casting, outer cover is stainless steel, and acid-resistant silicon carbide seals.
The stainless series submersible agitator slurry pump is suitable for all light acid, corrosive and/or sea water application fluid in pH values between 4 to 10pH.
For strong acidity and alkalinity applications, please use the specified chemical vertical submerged pump.
Investment Casting Precision casting with the use of an advanced stainless investment casting method that produces the highest quality with a smooth surface finish.
Viton O-rings are used throughout the stainless steel submersible slurry agitator pump to give better pump life in corrosive acid and aggressive media.
Austenitic Stainless Steel SS316 water application of light acid-base.
Hydroman Hydraulic Submersible Slurry Pump is protected by a mechanical seal, which can effectively prevent high-pressure water and impurities. In addition to the main impeller, there is also an agitating impeller for the submersible slurry pump, which can agitate the slag deposited on the bottom of the water. Plus, the mixing impeller and other main flow parts are made of advanced materials, which are wear-resistant, corrosion-resistant, non-clogging, strong in sewage, and can effectively pass larger solid particles.The slag suction efficiency is high, and the dredging is more thorough. The motor of submersible slurry pumps dives into the water, without the need to construct complex ground protection and fixing devices, and the management is easier, thus to ensure high and reliable performance.
Slurry Pump Polyurethane Parts are made by the material of a polymer composed of organic units joined by carbamate (urethane) links, so the work life of Polyurethane slurry pump parts is longer than Rubber materials for 3~5 times, Slurry Pump Polyurethane Spare Parts include Impeller, Throat bush, Frame plate liner, Cover plate liner, Frame plate liner insert etc. They are very easily worn-out components because they work under longtime impact of abrasive and corrosive slurries. For the long service life of pump parts, Polyurethane material plays an important role here.
The Main Parts for Slurry Pump Polyurethane Spare and Parts:
Polyurethane Slurry Pump Liners - Easily replaceable liners are bolted, not glued, to the casing for positive attachment and ease of maintenance. Hard metal liners are completely interchangeable with pressure molded elastomers. Elastomer seal rings back all liner joints.
Slurry Pump Polyurethane Impeller - front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomer impellers are complete interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available.
Polyurethane Slurry Pump Throatbush - Wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.
Tobee 300 L series Mining Slurry Pump Wear Parts including Impeller RSL30147A05A, Frame Plate Liner Insert SL30041MA05, Volute Liner SL30110A05, Throat Bush SL30083MA05, Bearing Assembly FFRS005M, Stuffing Box RSL30078D21 and Shaft Sleeve RS076C21, etc.
Tobee�® 300F-L Light Duty Slurry Pumps have been developed for continuous use in slurry applications where low to medium developed head is required, designed for lighter slurry densities up to 1,35. Shares proven unique design features with the heavy-duty slurry pump range, A key feature is the light-duty high-efficiency impeller, engineered with the latest hydraulic and wear technologies for high-efficiency and increased wear life. With a range of high quality parts and different material combinations, the L Light duty slurry pump has the versatility to ensure the most appropriate pumping solution for any given application.
Tobee 300 L series Mining Slurry Pump Wear Parts including Impeller RSL30147A05A, Frame Plate Liner Insert SL30041MA05, Volute Liner SL30110A05, Throat Bush SL30083MA05, Bearing Assembly FFRS005M, Stuffing Box RSL30078D21 and Shaft Sleeve RS076C21, etc.
Tobee�® 300F-L Light Duty Slurry Pumps have been developed for continuous use in slurry applications where low to medium developed head is required, designed for lighter slurry densities up to 1,35. Shares proven unique design features with the heavy-duty slurry pump range, A key feature is the light-duty high-efficiency impeller, engineered with the latest hydraulic and wear technologies for high-efficiency and increased wear life. With a range of high quality parts and different material combinations, the L Light duty slurry pump has the versatility to ensure the most appropriate pumping solution for any given application.
Hydroman Hydraulic Slurry Pump is designed for handling rocks, slurry, gravel, sand, stone, minerals, bentonite and others, with the shortest delivery times. Hydroman pumps deliver massive solids production at very low operational costs. The hydraulic slurry pump can install cutters or agitators on various excavators to work like submersible dredging pumps, It can be also used in various hydraulic stations.
Hydroman Hydraulic Slurry Pump is designed for handling rocks, slurry, gravel, sand, stone, minerals, bentonite and others, with the shortest delivery times. Hydroman pumps deliver massive solids production at very low operational costs. The hydraulic slurry pump can install cutters or agitators on various excavators to work like submersible dredging pumps, It can be also used in various hydraulic stations.
Hydraulic Slurry Pump with Agitator for Pumping Sand
33664 Slurry Pump Gravel Pump Suppliers
Short on time? Let Slurry Pump Gravel Pump sellers contact you.
