Find Verified Self Erecting Tower Crane Qtz63 Suppliers, Manufacturers and Wholesalers

Tower crane

High quality and lowest quotation

It has many working modes and wide applying range. It has working modes like being fixed with groundwork and being attached to wall, etc., which can be applied to different working objects. Hoisting height of separate type is 46m, attaching type is made by adding standard sections and attaching device under foundation of separate type, its hoisting height can reach 150m, and max. hoisting weight of special type can reach 200m.

The tower crane is a hydraulic tower crane with swing top, horizontal jib and mobile trolley. It has the hoisting moment of 760Kn.m, the maximum hoisting load of 6t and the maximum working radius of 50m.The hoisting height of anchoring tower crane is 40m and that of climbing tower crane is 140m.

The tower crane is a hydraulic tower crane with swing top, horizontal jib and mobile trolley. It has the hoisting moment of 400Kn.m,the maximum hoisting load of4t and the maximum working radius of 48m.The hoisting height of anchoring tower crane is 28m and that of climbing tower crane is 90m.
The tower crane has excellent performance and is suitable for hoisting in short civil or industrial buildings or loading or unloading in ports or goods yards
The products of Huaxia Group are your best choices of construction machines.

The maximum length of its jib can be 60m and also can be reassembled to 55m,50m,45m,40m, which can have a wide work range spite of barriers.The anchoring tower crane has the hoisting height of 46.2m.The tower crane use fluid drive system to increase or decrease mast height so as to make proper crane height for different building height.The climbing tower crane has the hoist height of 161m.At specific requirement and through special treatment ,the anchoring tower crane can have the hoisting height of 51.2m and the climbing one can have the hoisting of 200m.

Tower crane

Introduced from france the tower crane manufacturing techniques, scm can produce tower crane series from 25mt to 900mt.



Standard export wooden cases

Topkit tower crane, Topless tower crane, Luffing jib tower crane, Derrick crane

We are engaged in manufacturing wide range of self supported chimneys as per clients requirements. We have manufactured chimneys up till 140mtrs and erected. The same are self supported with platforms at various levels, samplling points, lightning arrestor and aviation lamp and other safety features.
Shipping International shipping
Panyment Type T/T
Minimum Order Quantity 1 NO
Packaging & Shipping
AS PER CLIENTS REQUIREMENTS
Our ServicesCustomer ServicesCompany Information
We Design and manufacture wide range of CHIMNEYS for steam boilers or Cement plants for ash recovery from 1 ton/hr to 100 ton/hr capacity and above. TheCHIMNEY comes with fully automated control system with fully automated control panel for controling.

Product Description
China Factory Construction Tower Crane Qtz80 (6010) 6ton 60m Jib Tower Crane for Sale
Our company's products have four series and dozens of different specifications and models. QTZ series, construction topkit tower crane , 4808, 4810, 5010, 5012, 5610, 6010, 6012, 6013, 6015, 7030, 7040, 7050 tower cranes developed and produced by the company; QTP series, topless tower crane/flattop tower crane , 5015, 5510, 6010, 6013, 6015, 7015 flat-head tower cranes; QTD series , luffing tower crane , 3520, 4015, 5020 boom tower cranes; QW series 1830 and 3023 roof tower cranes and SC200/200 construction hoist elevators .
QTZ80 (6010)-6T Tower Crane

The QTZ80 (6010) self elevating tower crane is a new type of lifting and transportation machinery designed to meet the requirements of high-rise building construction and equipment installation. The crane is a multi-purpose tower crane with a horizontal arm frame, a trolley variable amplitude, and an upward rotating self elevating mechanism. The arm length is 60 meters, and the rated maximum lifting capacity is 6 tons.

â??To be supplied as per client's specific require

Features and advantages:

1. This machine has a wide range of adaptability, which can not only meet the needs of general civil buildings in small, medium-sized, and urban areas, but also fully meet the needs of high and multi-story civil building construction in large and medium-sized cities. It can also be used for the construction of multi-layer and large-span industrial factories, as well as tower-shaped buildings such as tall chimneys and silos that use sliding membrane construction. It can also be used for loading and unloading work at ports and freight yards.

2. Easy installation and disassembly, using hydraulic lifting devices to increase or reduce the standard section of the tower body, so that the lifting height of the tower crane can adapt to changes in building height

3. High working speed, good speed regulation performance, stable operation, and high efficiency. The lifting mechanism basically achieves heavy load, low speed, and light load, high speed

4. The safety protection devices are complete, sensitive and reliable

5. The driver's cab is independent and external, and uses a linkage console to control various mechanisms, making it spacious, comfortable, safe, easy to operate, and with a good view.

Features
- No drift, dynamic tilt measuring
- Lowest cost, high performance
- Built in MEMS triaxial accelerometer and triaxial gyroscope
- Dynamic accuracy ±0.5°�optional ±1° or ±0.1°
- Highest refresh rate 400Hz
- Autonomous working, do not need any external auxiliary
- Mounted wherever needed

Description
SST810 dynamic inclinometer is specially designed for motion application, which is an inertial product with highest 400Hz update rate.
The traditional inclinometer on the market is designed on accelerometer and electrolyte principles. In dynamic motion such as rapid movement vehicle and vessel, the measurement result will be affected by extra axial acceleration and centripetal acceleration, so that valid angle measurement data can't identify effectively, and accuracy is unable to guarantee. SST810 adopts advanced inertial navigation technology to exactly measure dynamic pitch/roll tilt angle for long time, without aiding of GPS.

1. Qtz80 tower crane: rated moment of lifting: 800kn. M, the max lifting weight: 8t, the max range: 56m.

2. Qtz80 tower crane: set lifting height: 45m, can undertake 14-stoery or below buildings, adhesion height 75m and 150m, can undertake 32-story or 50-story or below buildings.

3. Qtz80 tower crane owns two lifting points, level beam, upper rotating, hydraulic lifting, easy for installation and disassembling.

4. Qtz80 tower crane uses rotating motor, light load with high speed and heavy load with low speed, low noise.

5. The qtz80 tower crane adopt the technology of odm series turning framework of potan french, the framework use the advanced electric and electronic technology, electromagnetism coupling and planet reducer infinitely timing, twisting moment large when starting, operate smoothly, advanced function.



Exporting packing by container

The guheng tower crane qtz160(tc6515) is a big model who is fit for the high building. The load capacity is 10ton, the max. Hoisting height can be more than 200m, the jib length is 65m, tip load 1.5ton, free stand height 50m. The material is strong and fixed type mast section.It is a good choice for big building



Export packing by container

According to potain technology;
To equip crv moment motor for slewing mechanism;
To use advance sand-blasted before painting;
6s managerial system to keep perfect details of our production and ccc safety guarantee.
It's max. Working range 70m, hoisting capacity 12-16t, max. Hoisting height 203m, the tower crane have fixed type, inner-climbing type and rail-mounting type to fit for the tall building construction.



Export packing by container

Max load 6t
Jib length 45m
Free standing height 49.36m
mast section 1.6*1.6*3m or 2*2*3m
tip load 2.2t

Advantages:
1.The section of the jib is much larger than the standard topkit tower crane,hence the jib is more studier.

2.When there is need to place many cranes in one area,with over lapping jib,height of the 2nd crane required will only be 1-2Mtrs higher than the first crane.In normal cranes,this height needs to be minimum 9Mtrs.



Container packing.

Topkit tower crane K30/30
Performance parameters:
Model Topkit tower crane K30/30.

Jib length 70m
Max. load capacity 12t
Tip load 3t
Base type Stationary/Attached/Internal-climbing
Hoisting height Free standing 51.7m
Mast section 2*2*3m.

Advanced technology are applied in the mechanisms and control systems, the tower crane has good performance,high reliability and easy maintenance.

We offer frequency control on hoisting mechanism, slewing mechanism and trolleying mechanism as our standard equipment, which has many advantages such as excellent timing characteristics, stable start and stop, minor mechanical and electrical impaction, good positoning and high productivity and so on.

Qtp7427 topless tower crane
Model: qtp7427
Maximum load: 18 t
Maximum working range: 74m
Tip load: 2.7t
Working range: 3.8 to 74m
Freestanding height: 49.7m
Anchored height: 221.8m
Derricking speed: 0-69m/min
Slewing speed: 0-0.8r/min.

Model number: QTD125(TC4526)
Maximum load: 10T
Jib length: 45m
Tip load: 2.65T
Working range: 5 to 45m
Freestanding height: 47.4m
Anchored height: 162.2m
Hoisting speed: 80/40
Derricking speed: 10.67m/min
Slewing speed: 0 to 0.8rpm
It can be widely used in large-scale, ultra-high type of civil construction, power plants, bridges, dams and other works.

We can offer all the type of tower crane.



Exporting packing

Model:qtz125 basic height(m):50 maximum height(m):200 jib length(m):65 main specifications steel string(mm):12512514+ festival standard specifications(m):1.8351.8352.5