The gigalight 40gbase-lr4 cfp module supports link lengths of up to 10km over a standard pair of g.652 single-mode fiber with duplex sc connectors. The 40 gigabit ethernet signal is carried over four wavelengths. Multiplexing and demultiplexing of the four wavelengths are managed within the device. Anti-static bag, carton, wooden case
40G QSFP+ to QSFP+ DIRECT ATTACH CABLES ITEM NO.:EQSPPD4A-324CXX DATA RATE:40G PRODUCT ORIGIN:Made in China SHIPPING PORT:ShenZhen Features Compliant QSFP MSA specifications Fully compatible with IEEE802.3ba and Infiniband QDR specifications 40Gb/s total bandwidth 4 independent duplex channels operating at 10Gbps, also support for 2.5Gbps, 5Gbps data rates 100 ohm differential impedance system Single 3.3V power supply, low power consumption,
PHYSICS OF FIBER OPTICS TRAINER is designed to learn basic physics of fiber optics including fiber end preparation. Students can also study the construction of transmitter & receiver to form analog & digital link. Ample number of experiments can be performed with this kit by referring to the exhaustive manuals provided with the kit. Features: 01. On-board Function Generator. 02. Transmitter : 1 No. 03. Receiver : 2 Nos 04. Fiber Optic Analog Link. 05. Fiber Optic Digital Link. 06. Signal strength indicator. Technical Specification: 01. Transmitter : 1 No. LED. Peak wavelength of emission 635 nm Red visible. 02. Receiver : 2 Nos. silicon photo detectors 03. Modulation : Intensity modulation. 04. Driver Circuit : Analog and digital configuration for 635 nm LED. 05. Analog Bandwidth : 35KHz. 06. Digital Bandwidth : 50KHz. 07. On-Board Function Generator : 08. Sine Wave &TTL Square Wave : 09. Frequency Range : 1Hz to 10Hz, 10Hz to 100Hz, 100Hz to 1 K H z , 1 K H z t o 10KHz 10. Amplitude : 0 to 4Vpp. (Except Square) 11. Voice Communication : Fiber Optic voice link using dynamic MIC &SPEAKER 12. Signal strength indicator : 8 LED's provided to m e a s u r e o p t i c a l power. 13. Fiber Optic Cable: 14. Type : 1000 micron Step Index, Multimode Plastic Fiber 15. Fiber Lengths : 1&5 Meter. 16. Power Supply : GND, +5V, +12V, -12V at100mAINT.
Duplex LC connector Commercial temperature rang -40C-85C (optional) 10Gb/s serial optical interface compliant to 802.3ae 10GBASE-SR Maximum link length of 120Km Single 3.3V power supply Standard bail release mechanism RoHS Compliant Products Available.
Video optic transceiver 1.Support point-to-point connection 2.Digital broadcast transmission without compressing and damaging 3.No mutual interference of frequency modulation. phase modulation and amplitude modulation 4.Support video regenerated delay without loss. 5.Compatible with PAL, SECAM and NTSC video standard 6.Support any high-resolution video signal 7.Support simultaneous transmission of video. audio. data. Ethernet telephone signals 8.Gigabit fiber transmission technology. high capacity. easily upgrade 9.Provides single mode or multi-modes fiber transmission. Distance0-100 kilometer 10.Dedicated ASIC design and high speed DSP Technology 11.Fiber technology of WDM / CWDM / DWDM Advanced adaptable technology and no regulation 12.Surface Mount Technology
Sfp optical transceiver Hot-pluggable, duplex lc connector Single +3.3v power supply Lvpecl data interface 850/1310/1550nm vcsel/fp/dfb, sm/mm fiber optional Eye safety, designed to meet laser class1 Compliant with telcordia (bellcore) gr-468-core
1x9 mm optical transceiver Transmitter center wavelength:850nm, 1310nm Single +3.3v or +5v power supply Lvpecl / pecl data interface, dc coupling 1x9 package Compliant with telcordia (bellcore) gr-468-core Eye safety, meet laser class 1, compliant with iec60825-1 Isolation >30db, cross talk
NETON SFP Transceiver Module with Single LC Receptacle Transmitter center wavelength: 1310nm, 1550nm Data rate: 155Mbps to 1.25Gbps QC inspection: ISO, CE, CB, UL, ROHS, FDA, etc Power supply: single 3.3V Distance: SR, IR1, IR2, LR1, LR2 Operating temperature: 0C to 70C or -40C to 85C. NETON optic products, 1x9 Transceiver Module, SFP+ Transceiver Module, SFP Transceiver Module, CWDM Transceiver Module, GBIC Transceiver Module, GPON Transceiver Module, 2x5 Transceiver Module, SFF Transceiver Module and so on, with the international authorized certificates ISO, CE, CB, UL, ROHS, FDA, etc, have been sold to more than 20 countries and regions and been widely used for Ethernet, Fiber Channel, ATM, SONET/SPH, Switches, Routers, Hubs, Digital Video Transmission and other optic networking applications. Features of NETON SFP Bi-Di Transceiver Module with Single LC Receptacle: 1.Transmitter center wavelength: 1310nm, 1550nm 2.Data rate from 155Mbps to 1.25Gbps 3.Single 3.3V power supply 4.Single LC receptacle 5.Distance SR, IR1, IR2, LR1, LR2 6.Monitoring interface compatible with SFF-8472 7.Operating temperature 0C to +70C or -40C to +85C Applications of NETON SFP Bi-Di Transceiver Module with Single LC Receptacle: 1.Ethernet 2.Fiber Channel 3.ATM 4.SONET OC-3/SDH STM-1 5.Switches 6.Routers 7.Other optic links. 10PCS Plastic Box, 10 Boxes Per CTN.
NETON SFP Bi-Di Transceiver Module with Single SC Receptacle Transmitter center wavelength: 1310nm, 1550nm Data rate: 155Mbps to 1.25Gbps QC inspection: ISO, CE, CB, UL, ROHS, FDA, etc Power supply: single 3.3V Distance: SR, IR1, IR2, LR1, LR2 Operating temperature: 0C to 70C or -40C to 85C. NETON optic products, 1x9 Transceiver Module, SFP+ Transceiver Module, SFP Transceiver Module, CWDM Transceiver Module, GBIC Transceiver Module, GPON Transceiver Module, 2x5 Transceiver Module, SFF Transceiver Module and so on, with the international authorized certificates ISO, CE, CB, UL, ROHS, FDA, etc, have been sold to more than 20 countries and regions and been widely used for Ethernet, Fiber Channel, ATM, SONET/SPH, Switches, Routers, Hubs, Digital Video Transmission and other optic networking applications. Features of SFP Bi-Di Transceiver Module with Single SC Receptacle: 1.Transmitter center wavelength: 1310nm, 1550nm 2.Data rate from 155Mbps to 1.25Gbps 3.Single 3.3V power supply 4.Single SC receptacle 5.Distance SR, IR1, IR2, LR1, LR2 6.Monitoring interface compatible with SFF-8472 7.Operating temperature 0C to +70C or -40C to +85C. Applications of SFP Bi-Di Transceiver Module with Single SC Receptacle: 1.Ethernet 2.Fiber Channel 3.ATM 4.SONET OC-3/SDH STM-1 5.Switches 6.Routers 7.Other optic links. 10PCS Plastic Box, 10 Boxes Per CTN.
40G QSFP+ BIDI optical transceiver module is a pluggable optical transceiver with a duplex LC connector interface for short-reach data communication and interconnect applications using Multi-Mode Fiber (MMF). It offers customers a compelling solution that enables reuse of their existing 10 Gb duplex MMF infrastructure for migration to 40 Gigabit Ethernet connectivity.
155M10G series sfp transceivers, GBIC, X2, XFP, XENPAK, CWDM and DWDM SFP, XFP, X2, xenpak, plastic optical transceiver, 10G SFP+ Cabel and 40g qsfp+ cable.
SFP-CWDM Fiber-optic Transceiver SFP-CWDM-xx SFP Fiber-optic Transceiver with Up to 155M/1.25Gbps Data Rate 1470/1490/1510/1530/1550/1570/1590/1610nm Wavelength(DFB laser) Reach to 40km/80km. (Digital Diagnostic Monitor compatible) C-Light transceivers family includes SFP SFP+ XFP X2 CWDM. All products are compatible with MSA. They are suitable for Fast Ethernet, Gigabit Ethernet, SDH/STM and Fiber Channel network system. Data rate ranges from 155M to 10G. Distance reach from 80m to 80km in MMF and SMF. These products can be compatibly used in brands devices of 3COM, Alcatel, Cisco, Extreme, Foundry, HP and Juniper. 1) Weight:0.02KG/PIECE; 2) Dimensions:60*12*11mm.
X2 10G Fiber-optic Transceiver X2-10GB-SR/LR X2 Fiber-optic Transceiver with Up to 10GB Data Rate 850nm/1310nm Wavelength(DFB laser) Reach to 85m/10km. (Digital Diagnostic Monitor compatible) C-Light transceivers family includes SFP SFP+ XFP X2 CWDM. All products are compatible with MSA. They are suitable for Fast Ethernet, Gigabit Ethernet, SDH/STM and Fiber Channel network system. Data rate ranges from 155M to 10G. Distance reach from 80m to 80km in MMF and SMF. These products can be compatibly used in brands devices of 3COM, Alcatel, Cisco, Extreme, Foundry, HP and Juniper.
Optical transceivers, sfp, 10g sfp+, 25g sfp28, 40g qsfp+, 100g qsfp28 , 400g qsfp dd, direct attach cables (dac), active optical cables (AOC), ethernet media converter, fiber optical patchcord, bwdm, cwdm, dwdm mux/demux and 100g repeater products..
MPO Trunk Cables are designed for high density application which offers excellent benefits in terms on-site installation time and space saving. The trunk cable assemblies are composed of high quality LSZH jacketed fiber optic cables used in data center, telecom and backbone application for 100G connectivity. Our MPO trunk cables are factory pre-terminated, tested and packed along with the test reports. MPO Trunk Cable are built with highest quality components. 24 Fiber MPO trunk patch cord assemblies are used to interconnect CFP/CFP2/CFP+/CXP transceivers.
40g cwdm sm 10km qsfp+ optical transceiver Specification Data rate: 40g Channel: 4*10 cwdm Distance: 10km Interface: lc Fiber: sm Ddm: yes Place of origin: made in china Port:shenzhen Applications 40gbase-lr4 40g ethernet links Infiniband qdr and ddr interconnects Client-side 40g telecom connections Working temperature: commercial: 0°c to +70°c;industrial:-40°c to +85°c Optical module used in ethernet, sdh, sonet, can be compatible with cisco 2900 series, cisco 4000 series, cisco 5000 series, huawei, the pole into, d-link, zte, hp, juniper and other equipment. Our products require strict testing standards, standard packing form, to provide customers with quality service and timely delivery cycle. Scope of application: switch, ethernet, data center, sdh, sonet, atm Package type: individual package or 10pc/package
Hot Pluggable QSFP+ form factor Supports 41.25Gb/s aggregate bit rate Multirate capability: 1.06Gb/s to 10.5Gb/s per channel Maximum link length of 150m on OM3 MMF Single MPO-12 receptacle Power dissipation:
Cybervision CHM-4K series Ultra HD-SDI optical transceiver consists of optical transmitter CHM-4KT and Optical receiver CHM-4KR for transmitting 1 channels 4K ultra HD-SDI signal , or 4 channels 3G ultra HD video, and downward compatible with SD-SDI with bit rate of 143, 177, 270, 300, 1485Mbps etc. With circuit reducing the signal jitter at CHM-4KR, it can deal with the distorted signal well, it can provide more than 120m automatic balance for 3GMbps signal, more than 250m for 270Mbps signal. With built-in distribution amplifier, CHM-4KR provides 2 channels output. CHM-4K supports SMPTE178 standardpassed the test of SDI pathology. Features: 1. Supports SMPTE424M, SMPTE292M, SMPTE259M 2. Supports 3G-SDI/HD-SDI/SD-SDI/DVB-ASI 3. The best solution for live casting by connecting with 4 channels 3G-SDI 4. With cable equalize at the input/Output, it can make up the loss of cable transmission 5. With circuit reducing the signal jitter, it can deal with the distorted signal well. Input/output cable transmission distance can be up to 120m@3G (BELDEN8281 cable) 6. LCD at both transmitter and receiver show working status, it is convenience to operate and maintain: 1) Optical interface type; 2) laser working wavelength; 3) transmitting/receiving optical power; 4) working temperature; 5) input/output working status of each channel signal; 6) voltage of dual power supplies for main board; 7. With clear working status, there are LED indicators on panel for input SDI signal, optical signal, power supply. 8. Supports SMPTE178 standardpassed the test of SDI pathology 9. Dual power suppliers can be selected, which can supply power independently, backup redundantly 10. Network management can be selected, support SNMP and web monitoring
Main specifications: As size, structure, material, surface treatment and so on that the customers required. We supply them with good quality and low price. Please contact us to know details. Besides, there are a large volume of optical components in various shapes and sizes in stock to facilitate quick deliveries. Safety carton package
00G data rate Support line rates from 103.125 Gbps to 111.81 Gbps Up to 300m based on MMF ,40km on SMF Digital Diagnostics Monitoring Interface Duplex LC optical receptacle No external reference clock Electrically hot-pluggable Compliant with QSFP28 MSA with LC connector Power dissipation < 3.5 W Compliant with CE,FCC,Rohs,REACH
