Pvc Celuka Foam Sheet Extrusion Line Suppliers and Manufacturers

DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.

PRODUCT DATA SHEET ACID RESISTANT BRICK Material : RED SHALE Type Acid Resistant Brick Size (mm) 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK) Specification : ASTM C279, ASTM C410, IS 4860-1982 DESCRIPTION : We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required. FEATURES OF ACID RESISTANT BRICK: Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature AREA OF APPLICATION: Chemical Analysis (Average) Acid and Alkali Storage Tank Farms Demineralization plants and Water treatment plants Chimney inside lining, FGD linings Towers and Columns Process Vessels and Tanks Sewerage Treatment Plants and Lines Industrial Flooring and Bund Areas Chimney and Flue Gas Linings Hoppers and Chutes SiO266.4 Al2 0324 TiO21.1 Fe2 O31.1 K2 O + Na2 O2.5 NOT RECOMMENDED: HF acid or other fluoride solutions Heavy thermal shock Typical Physical Properties of GANESHAS Acid and Chemical Resistant Brick Characteristic RED SHALE ACID RESISTANT BRICK Test Standard Bulk Density, gm/cc - 2.3 to 2.35 ASTM C-20 -Water Absorption, % - 0.1 to 1.5 IS 4860-1968 Apparent Porosity, % -0.5 to 1.75 S 4860 Acid Solubility (H2SO4), Loss in Mass,% -0.1 to 1.8 ASTM C-279 Modulus of Rupture, PSI -2133 to 3555 ASTM C-67 Compressive Strength, Kg/cm2 - 700-900 IS 4860-1968 Abrasion Resistant , Volume in mm3 -69 to 85 EN 102 Surface Hardness, MOHS Scale - 7

PRODUCT DATA SHEET ACID RESISTANT BRICK Material : FIRECLAY Type Acid Resistant Brick Size (mm) : 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK) Specification : ASTM C279, ASTM C410, IS 4860-1982 DESCRIPTION : * We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required. FEATURES OF ACID RESISTANT BRICK: * Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature AREA OF APPLICATION: Chemical Analysis (Average) Acid and Alkali Storage Tank Farms Demineralization plants and Water treatment plants Chimney inside lining, FGD linings Towers and Columns Process Vessels and Tanks Sewerage Treatment Plants and Lines Industrial Flooring and Bund Areas Chimney and Flue Gas Linings Hoppers and Chutes SiO266.4 Al2 0324 TiO21.1 Fe2 O31.1 K2 O + Na2 O2.5 NOT RECOMMENDED: HF acid or other fluoride solutions - Heavy thermal shock Characteristic Fireclay Type Acid Resistant Brick - Test Standard Bulk Density, lbs/ft3 - 2.25 to 2.30 ASTM C-20 Water Absorption, % - 0.1 to 1.8 ASTM C-20 Apparent Porosity, % - 4.05 to 4.14 ASTM C-20 Acid Solubility (H2SO4), Loss in Mass,% - 6.1 to 6.8 ASTM C-279 Modulus of Rupture, Mpa - 14.6 ASTM C-67 Compressive Strength, PSI - 15500 to 17250 ASTM C-67 Abrasion Resistant , Volume in mm3 - 71 to 96 EN 102 Surface Hardness, MOHS Scale - 7 Thermal Conductivity, BTU-in/hr-ft-F - 6.94 to 7.12 ASTM C-236 Thermal Expansion Coefficient,in/in/Fx10-6 - 2.6 to 2.8 EN 103

PP floor, totally PVC Free, is an innovative green environmental protection flooring, using edible grade PP material, more healthy and safety. It is recyclable and easily degradable, is the replacement and upgrade of traditional PVC flooring.

PVC regrind mix colors MATERIAL : PVC regrind mix colors CATEGORY : PVC TYPE : Regrind GRADE : Mixed SPECIFICATION : PVC regrind white, regrinded from sheet ORIGIN : Japan LOADING WEIGHT : 33 FOB (USD/Ton) : CFR (USD/Ton): 600-800

PMMA Sheet Natural Plastic Scrap For Sales MATERIAL : PMMA Sheet Natural CATEGORY : PMMA TYPE : Sheet GRADE : Extrusion SPECIFICATION : All acrylic no contamination ORIGIN : Canada LOADING WEIGHT : 18 Tons CFR (USD/Ton): 700-900

2Lians can supply below scrap product: PVC Repro Pellet (Soft) Black Color Plastic Scrap MATERIAL: PVC repro pellet (soft) black color CATEGORY: PVC TYPE: Repro pellet (soft) GRADE: Black color SPECIFICATION: Soft PVC repro pellet (hot-cut),made from PVC cable skin can be contained 10% of XLPE and/or other dust. Can be used for making soft PVC pipe/cable or floor sheet. 80MT monthly supply. ORIGIN: Japan LOADING WEIGHT: 20 Tons FOB (USD/Ton): 850-950

MATERIAL : PC Sheet Regrind Smoke Color CATEGORY :PC TYPE :Regrind GRADE :Extrusion SPECIFICATION : Smoke Color, MW 22,000, 100% PC no coating 705SD ORIGIN : Japan LOADING WEIGHT : 25 FOB (USD/Ton) : 1720-1920

We are ready to supply 200 tons of Mixed Color PVC Regrind on a regular monthly basis. We wish to make a deal with the genuine PVC Regrind buyers from all across the world. Place of Origin : JAPAN, US, EUROPE Materials : Polyvinyl Chloride [PVC] Color : Mix Color Application : Water Pipe, Window, Board, Contruction... Grade : Extrusion K65-67 Type : Post Industrial Waste Quality : Clean and less than 3% shortage Form : Regrind Unit : Ton/Tons FOB Price : $300.00 - $500.00 Minimum Order : 25 Tons Payment Term : T/T 50/50 and L/C 100% at sight Estimate Lead Time : 15 - 20 days Origin : Tokyo, Yokohama, Hamburg, New York, Long Beach Supplying Capacity : 200 tons/month Packaging : Jumbo Bag Possible PVC Regrind buyers, please do contact us.

We are ready to export 200 tons of Grey PVC Pipe Regrind on a continuous monthly basis. We wish to work with the reliable PVC Regrind buyers from worldwide. Place of Origin : JAPAN, US, EUROPE Materials : Polyvinyl Chloride [PVC] Color : Grey Application : Water Pipe, Window, Board, Contruction... Grade : Extrusion K65-67 Type : Post Industrial Waste Quality : Clean and less than 3% shortage Form : Regrind Unit : Ton/Tons FOB Price : $400.00 - $600.00 Minimum Order : 25 Tons Payment Term : T/T 50/50 and L/C 100% at sight Estimate Lead Time : 15 - 20 days Origin : Tokyo, Yokohama, Hamburg, New York, Long Beach Supplying Capacity : 200 tons/month Packaging : Jumbo Bag

We are ready to supply 200 tons of Mixed Color PVC Regrind on a regular monthly basis. We wish to make a deal with the genuine PVC Regrind buyers from all across the world. Place of Origin : JAPAN, US, EUROPE Materials : Polyvinyl Chloride [PVC] Color : Mix Color Application : Water Pipe, Window, Board, Contruction... Grade : Extrusion K65-67 Type : Post Industrial Waste Quality : Clean and less than 3% shortage Form : Regrind Unit : Ton/Tons FOB Price : $300.00 - $500.00 Minimum Order : 25 Tons Payment Term : T/T 50/50 and L/C 100% at sight Estimate Lead Time : 15 - 20 days Origin : Tokyo, Yokohama, Hamburg, New York, Long Beach Supplying Capacity : 200 tons/month Packaging : Jumbo Bag

We are interested to supply 200 MT of Post Industrial Soft Mix Color Pvc Pipe Regrind. PVC Grey Pipe Regrind Place of Origin: : JAPAN, US, EUROPE Materials: : Polyvinyl Chloride [PVC] Color : Grey Application : Water Pipe, Window, Board, Contruction... Grade : Extrusion K65-67 Type : Post Industrial Waste Quality : Clean and less than 3% shortage Form : Regrind Unit : Ton/Tons FOB Price : $400.00 - $600.00 Minimum Order : 25 Tons Payment Term : T/T 50/50 and L/C 100% at sight Estimate Lead Time : 15 - 20 days Origin : Tokyo, Yokohama, Hamburg, New York, Long Beach Supplying Capacity : 200 tons/month Packaging : Jumbo Bag

We are ready to supply 200 tons of Mixed Color PVC Regrind on a regular monthly basis. We wish to make a deal with the genuine PVC Regrind buyers from all across the world. Place of Origin : JAPAN, US, EUROPE Materials : Polyvinyl Chloride [PVC] Color : Mix Color Application : Water Pipe, Window, Board, Contruction... Grade : Extrusion K65-67 Type : Post Industrial Waste Quality : Clean and less than 3% shortage Form : Regrind Unit : Ton/Tons FOB Price : $300.00 - $500.00 Minimum Order : 25 Tons Payment Term : T/T 50/50 and L/C 100% at sight Estimate Lead Time : 15 - 20 days Origin : Tokyo, Yokohama, Hamburg, New York, Long Beach Supplying Capacity : 200 tons/month Packaging : Jumbo Bag

We are ready to export 200 tons of Grey PVC Pipe Regrind on a continuous monthly basis. We wish to work with the reliable PVC Regrind buyers from worldwide. Place of Origin : JAPAN, US, EUROPE Materials : Polyvinyl Chloride [PVC] Color : Grey Application : Water Pipe, Window, Board, Contruction... Grade : Extrusion K65-67 Type : Post Industrial Waste Quality : Clean and less than 3% shortage Form : Regrind Unit : Ton/Tons FOB Price : $400.00 - $600.00 Minimum Order : 25 Tons Payment Term : T/T 50/50 and L/C 100% at sight Estimate Lead Time : 15 - 20 days Origin : Tokyo, Yokohama, Hamburg, New York, Long Beach Supplying Capacity : 200 tons/month Packaging : Jumbo Bag

PVC Car Stop Block Black Color For Sales MATERIAL : PVC car stop block black color CATEGORY : PVC TYPE : car stop block GRADE : black color SPECIFICATION : "This is a material originally processed from electric wires. After that, it was made as a sheet-shaped product for use in car insoles, car stop block products and bag insoles products. Therefore, 100% PVC is not accurate. A little bit PE is mixed. 2000MT available" ORIGIN : Japan LOADING WEIGHT : 20-22 MT FAS (USD/Ton) : 200-350

We have 200 tons of PVC Window Profile Regrind for Sale. We would like to make a strong scrap business partnership with the loyal PVC Window Profile Regrind buyers from all over the world. Place of Origin : JAPAN, US, EUROPE Materials : Polyvinyl Chloride [PVC] Color : Mix Color Application : Water Pipe, Window, Board, Contruction... Grade : Extrusion K65-67 Type : Post Industrial Waste Quality : Clean and less than 3% shortage Form : Regrind FOB Price : $300.00 - $500.00 Minimum Order : 25 Tons Payment Term : T/T 50/50 and L/C 100% at sight Estimate Lead Time : 15 - 20 days Origin : Tokyo, Yokohama, Hamburg, New York, Long Beach Supplying Capacity : 200 tons/month Packaging : Jumbo Bag Interested PVC Window Regrind buyers, please do reach us. We will be glad to offer you the best scrap material at a reasonable scrap price.

PVC Soft Mix Color Place of Origin: :JAPAN, US, EUROPE Materials: :Polyvinyl Chloride [PVC] Color :Mix Color Application :Sheet, Board, Bag, Packaging, Floor, Wall... Grade :Flexible Type :Post Industrial Waste Quality :Clean and less than 3% shortage Form :Roll, Sheet Unit :Ton/Tons FOB Price :$500.00 - $700.00 Minimum Order :25 Tons Payment Term :T/T 50/50 and L/C 100% at sight Estimate Lead Time :15 - 20 days Origin :Tokyo, Yokohama, Hamburg, New York, Long Beach Supplying Capacity :200 tons/month Packaging :Jumbo Bag

We are capable of supplying 200 tons of Clear and Soft PVC Roll Scrap on a monthly basis. Place of Origin : JAPAN, US, EUROPE Materials : Polyvinyl Chloride [PVC] Color : Transparent Application : Sheet, Board, Bag, Packaging, Floor, Wall... Grade : Flexible Type : Post Industrial Waste Quality : Clean and less than 3% shortage Form : Roll, Sheet Unit : Ton/Tons FOB Price : $600.00 - $800.00 Minimum Order : 25 Tons Payment Term : T/T 50/50 and L/C 100% at sight Estimate Lead Time : 15 - 20 days Origin : Tokyo, Yokohama, Hamburg, New York, Long Beach Supplying Capacity : 200 tons/month Packaging : Bales Interested PVC Roll Scrap buyers, please do contact us with the details of your scrap requirement and your preferred terms of payment. Hope to hear from you soon.