Gas R410A 11.3 kg in Rechargeable Cylinder The rechargeable cylinder is included in the price and remains your property. R410A is the internationally preferred solution for new air-conditioning systems, heat pumps, and similar applications. Unlike R-22, R410A operates at much higher pressures and is compatible exclusively with POE synthetic oil. A major advantage of R410A is its significantly higher cooling capacity up to 50% more than R-22 allowing for smaller, more compact system components. It is important to note that components such as copper pipes, valves, and compressors must be designed to withstand the higher pressures of R410A. Due to these higher operating pressures, R410A is not suitable for retrofitting existing systems that use R-22. For such conversions, R-424A or R-407C are recommended as direct substitutes. Key Features: Ozone-friendly with ODP = 0 Exclusively compatible with POE synthetic oils Can be recharged in the event of leaks Higher cooling capacity and working pressure than R-22 GWP (Global Warming Potential): 2088 Boiling Point (at 1.013 bar): -51.58C Glide (temperature range): 0.1C Saturated Vapor Density at 25C: 61.5 kg/m UN Number: 1078 Safety Classification: A1 (Low toxicity, non-flammable) Must be loaded in the liquid phase
ASHRAE Number: R-454B Refrigerant Class: A2L Type: Zeotropic blend Typical Lubricant: Polyolester (POE) Replaces: R-410A Chemical Formula: R-1234yf / R-32 (31.1% / 69.9%) Lower Flammability Limit (LFL): 0.303 kg/m Description: Solstice 454B is a low global warming potential (GWP) refrigerant designed as a replacement for R-410A in residential and commercial air conditioning systems. This zeotropic blend combines R-1234yf and R-32, making it an environmentally friendly alternative that complies with current regulations while providing efficient cooling performance.
ASHRAE Number: R-515B Class: A1 Refrigerant Type: Azeotropic blend Typical Lubricant: Polyolester (POE) Replaces: R-134a, R-227ea, R-124 Chemical Formula: R-1234ze / R-227ea (91.1% / 8.9%) Lower Flammability Limit (LFL): Non-flammable Description: Solstice N15 (R-515B) is a non-flammable azeotropic blend designed for use in chillers, heat pumps, and high-ambient air conditioning systems. It features a Global Warming Potential (GWP) of 293 according to the 4th IPCC assessment, making it a more environmentally friendly option compared to many traditional refrigerants. This hydrofluoroolefin (HFO) blend not only provides significant environmental benefits but also aligns with performance standards for new systems. Its design closely resembles R-1234ze, allowing for a long-term solution compatible with both A1 and A2L refrigerants.
Freon M059 R-417A Refrigerant Gas 25lb / 11.9 kg US Origin Chemours ISCEON MO59 (R417A) is an HFC retrofit refrigerant that is cost-effective and ozone-friendly, used to retrofit equipment that uses R22, such as air conditioning (AC) and medium-temperature commercial refrigeration systems. Applications: Residential and commercial air conditioning systems. Note: For water-cooled systems, MO29 is recommended. Medium temperature refrigeration, commonly used in commercial units, including food service, supermarket display cases, and food storage/processing. Benefits: Efficient and cost-effective retrofits. Ozone-friendly, does not harm the ozone layer. In most cases, no need to change lubricant type during the retrofit process; compatible with traditional and new lubricants. No need to replace existing equipment. After the retrofit, MO59 can be topped off without needing to drain the refrigerant. Advantages: Lower discharge temperatures compared to R22, which can extend compressor life. Provides the necessary cooling capacity in most systems. Proven to save energy in some systems. MO59 is an ozone-depleting substance (ODS) with zero ODP (Ozone Depletion Potential) and is not subject to phase-out under Montreal Protocol regulations. Recommended lubricants: Mineral Oil (MO), Alkylbenzene (AB), and Polyol Ester (POE) in most cases, no lubricant change is required during the retrofit process.
Forane 407C is a hydrofluorocarbon HFC refrigerant blend of HFC32 difluoromethane HFC125 pentafluoroethane and HFC134a 1112tetrafluoroethane designed as a substitute for R22 in air conditioning and refrigeration systems Its environmental advantage is that it does not harm the ozone layer making it a suitable alternative for new or existing R22 systems Key Features Compatibility Suitable for use in both residential and commercial air conditioning systems and nonflooded evaporator chillers When converting R22 systems to Forane 407C its essential to switch to POE oil from mineral oil High Glide Forane 407C has a high glide which may affect its performance particularly in flooded evaporators Ozone Friendly It doesnt deplete the ozone layer offering an environmentally friendly replacement for R22 Composition HFC32 230 nominal 20 HFC125 250 nominal 20 HFC134a 520 nominal 20 Specifications Moisture H2O 10 ppm by weight Acidity as HCl 10 ppm by weight Air NonCondensables 15 Volatile Impurities 05 Chloride Pass no visible turbidity ParticulatesSolids Pass visually clean WHOLESALE PRICES PLEASE INQUIRY FOR MORE DETAILS AND TECHNICAL SPECIFICATION
we have POE packed in 25kg bags or jumbo bags. MFI 1-4, density 0.88-0.91
New Passive PoE Injector single output 52VDC 90W PoE power supply Dual RJ45 PoE adapter for 5G Ethernet Switch Antenna *. Input:100-240VAC 50/60Hz*. Output: 52Vdc 90W *. AC socket: IEC320-C14, 3 pins socket *.Ethernet rate:1G/2.5G/5G *.Connector:1*RJ45 for PoE + 1*RJ45 for LAN *.Pin assignment: Pin 12/36 & 45/78, 4 pairs *.Protocol Standar:Non-IEEE802.3AF/802.3AT, Passive type *.Appliance: IP camera, poe switch, wifi AP ect *.output type: Single output *.Efficiency: 85% Min *.Ripple & Noise:480mV p-p *.MTBF:45000hours *. Protection:OVP SCP OCP OTP *. Material: Plastic housing, Compliance UL 94 V-0 *. Warranty:2 years *.Color: Black Company Profile * GRT established in 2007, is the manufacturer who specialized in research and development, production, sales, service as one. GRTis located in Shunde(the Kingdom of Home-Appliance), owns several Senior professional engineers, to research, develop and design kinds of power supplies and provide various customized solutions. *.All items is with 2% output accuracy and compliance with international standard. Owns license of Importing and Exporting and Pass kinds of international approvals like as UL, GS,TUV,CCC,CE, FCC,ROHS,ERP,PSE, CB,SAA ect, suitable for the global markets. *.Owns ISO9001:2015 and kinds of advanced machines for production and testing. *.Owns two green workshops which covers area 8000 square meters. monthly output upto 880K Our Services & Strength *. Offer OEM service, accept print your own logo and special requirements for package and others *. Experienced Technical team, to provide kinds of solutions *. Provided authorized certifications *. 100% Full Burn-In Testing, strictly inspect and control during production FAQ 1.MOQ :500pcsas the the first order, small qty (more than 100pcs) will be acceptable. 2.Sample terms *Common sample:2pcs are free offered, the buyer shall pay for the shipping cost and Tax; Leadtime within one week *. Special Sample: the buyer shall pay for the sample cost, shipping cost, Tax, R&D cost (if caused) Leadtime will be confirmed when the project starting 3. Mass production 20-25 working days, from the day got the confirmed order and payment 4. Shipment By Sea, By Air, By Train, By Express ect 5.Payment: T/T in advance, L/C
Diesel Generator Set K50 Series 1600 kWe, 2000 kVA 1. Reliable and Durable Cummins 'K50 series' diesel engine with strong regrindable crankshaft, high strength connecting rod, low pressure fuel lines, ESTC (Step Timing Controls) injectors and high volume coolant system make 'K50 series' generating sets, more reliable and durable. Engines have clocked millions of hours operating in some of the world's most demanding conditions. Current engines are regularly upgraded with new technologies for better performance and economy. The ultimate proof of superior performance and reliability is the fact that Cummins entities worldwide source these engines from Cummins India for their markets. 2. Unmatched Warranty Cummins 'K50 series' diesel engine generating sets are a truly cost effective solution to long term power need backed by industry best, 2 years/5000 hrs warranty, for the entire generating set. With superior experience in technology, design capability and commitment reliability and quality we offer an unmatched 5 years or 5000 hours (including above 2 years) warranty coverage on 5 critical components (5C) of the engine - Cylinder Head, Camshaft, Crankshaft, Cylinder Block, Connecting Rod against manufacturing defect 3. Cummins Advantage Special features of Cummins 'K50 series' engines like ESTC (Electrical Step Timing Control) injectors, BCS (Bank Cut off System), low temperature aftercooler, square combustion chamber, optimized turbocharging and precision heavy duty camshaft make these engines the ultimate in exceptional fuel efficiency across the operating range. 4. Single Source Power Assurance Design, manufacture and testing of engine, alternator and other accessories is done by Cummins Group of companies for a countrywide product support network with a single source responsibility for the entire package.
*. Input:100-240VAC 50/60Hz *. Output:48VDC 0.32A 15.5W *. AC socket: IEC320 C6 or C8 optional *.Ethernet rate: 10/100/1000Mbps gigabit *.Pin assignment: Pin 12/36 & 45/78, 4 pairs *.Protocol Standard:Active type, compliance with IEEE802.3 Standard *.Appliance: IP camera, poe switch, wifi AP ect *.output type: Single output *.Efficiency: 84% Min *.Ripple & Noise:4800mV p-p *.MTBF:45000hours *. Protection:OVP SCP OCP OTP *. Material: Plastic housing, Compliance UL 94 V-0 *. Warranty:2 years *.Color: Black
Passive PoE Injector 24VDC 1A 24W PoE adapter 100Mbps Ethernet switch antennae networking AP CCTV camera *. Input:100-240VAC 50/60Hz *. Output: 48Vdc 1.25A 60W *. AC socket: IEC320-C14, 3 pins socket *.Ethernet rate:10/100/1000Mbps Gigabit *.Connector:1*RJ45 for PoE + 1*RJ45 for LAN *.Pin assignment: Pin 12/36 & 45/78, 4 pairs *.Protocol Standard:Passive type, Non-compliance with IEEE802.3 Standard *.Appliance: IP camera, poe switch, wifi AP ect *.output type: Single output *.Efficiency: 86% Min *.Ripple & Noise:480mV p-p *.MTBF:45000hours *. Protection:OVP SCP OCP OTP *. Material: Plastic housing, Compliance UL 94 V-0 *. Warranty:2 years *.Color: Black
Gigabit Passive PoE Injector 48VDC 0.5A 24W PoE adapter 1000Mbps Ethernet switch antennae networking AP CCTV camera *. Input:100-240VAC 50/60Hz *. Output:48VDC 0.5A 24W *. AC socket: US plug, 2 pins plug *.Ethernet rate: 10/100/1000Mbps gigabit *.Pin assignment: Pin 12/36 & 45/78, 4 pairs *.Protocol Standard:Passive type, Non-compliance with IEEE802.3 Standard *.Appliance: IP camera, poe switch, wifi AP ect *.output type: Single output *.Efficiency: 84% Min *.Ripple & Noise:4800mV p-p *.MTBF:45000hours *. Protection:OVP SCP OCP OTP *. Material: Plastic housing, Compliance UL 94 V-0 *. Warranty:2 years *.Color: Black
Solest 68 is a formulated ISO VG68 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years service in the field. Designed to maximize lubrication in HFC systems, Solest 68 provides superior bearing protection with greater film strength than standard HFC lubricants. This product provides effective wear protection for steel and aluminium surfaces for increased system life and improved efficiency. Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPI laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Soles lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point. Applications and Compressor Type HFC, HCFC, HFO Refrigeration Reciprocating, Screw, Rotary, Centrifugal, Scroll Compressors Features and Benefits Thermally stable Longer system life Improved oil management Efficiency gains Corrosion protection Enhanced system reliability and reduced down-time Excellent bearing lubrication Longer compressor Life Optimized System performance Reduced operating costs Environmentally friendly Biodegradable Excellent lubricity Increased efficiency, reduced cost of operation Outstanding Miscibility The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase. Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Solest 68, as a polyol ester has a controlled level of miscibility with HFC gases. Excellent Thermal Stability Sealed tube results (ASHRAE 97) indicate that Solest 68 provides excellent stability in the presence of HFC refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other materials of construction.
Solest 220 is a formulated ISO VG220 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years service in the field. Designed to maximize lubrication in HFC systems, Solest 220 provides superior bearing protection with greater film strength than standard HFC lubricants. This product provides effective wear protection for steel and aluminium surfaces for increased system life and improved efficiency. Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPI laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point. Applications and Compressor Type HFC, HCFC, HFO Refrigeration Reciprocating, Screw, Centrifugal Compressors Features and Benefits Thermally stable Longer system life Improved oil management Efficiency gains Corrosion protection Enhanced system reliability and reduced down-time Excellent bearing lubrication Longer compressor Life Optimized System performance Reduced operating costs Environmentally friendly Biodegradable Excellent lubricity Increased efficiency, reduced cost of operation Outstanding Miscibility The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase. Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Solest 220, as a polyol ester has a controlled level of miscibility with HFC gases. Excellent Thermal Stability Sealed tube results (ASHRAE 97) indicate that Solest 220 provides excellent stability in the presence of HFC refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other materials of construction.
Solest 220 is a formulated ISO VG220 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years service in the field. Designed to maximize lubrication in HFC systems, Solest 220 provides superior bearing protection with greater film strength than standard HFC lubricants. This product provides effective wear protection for steel and aluminium surfaces for increased system life and improved efficiency. Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPI laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point. Applications and Compressor Type HFC, HCFC, HFO Refrigeration Reciprocating, Screw, Centrifugal Compressors Features and Benefits Thermally stable Longer system life Improved oil management Efficiency gains Corrosion protection Enhanced system reliability and reduced down-time Excellent bearing lubrication Longer compressor Life Optimized System performance Reduced operating costs Environmentally friendly Biodegradable Excellent lubricity Increased efficiency, reduced cost of operation Outstanding Miscibility The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase. Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Solest 220, as a polyol ester has a controlled level of miscibility with HFC gases. Excellent Thermal Stability Sealed tube results (ASHRAE 97) indicate that Soles 220 provides excellent stability in the presence of HFC refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other materials of construction.
Solest 180 is a formulated VG180 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years service in the field. Designed to maximize lubrication in HFC systems, Solest 180 provides superior bearing protection with greater film strength than standard HFC lubricants. This product provides effective wear protection for steel and aluminium surfaces for increased system life and improved efficiency. This grade offers excellent resistance to dilution in HFC refrigerants. Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPIs laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point. Applications and Compressor Type HFC, HCFC, HFO Refrigeration Reciprocating, Screw, Centrifugal Compressors Features and Benefits Thermally stable Longer system life Improved oil management Efficiency gains Corrosion protection Enhanced system reliability and reduced down-time Excellent bearing lubrication Longer compressor Life Optimized System performance Reduced operating costs Environmentally friendly Biodegradable Excellent lubricity Increased efficiency, reduced cost of operation Outstanding Miscibility The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase. Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Solest 180, as a polyol ester has a controlled level of miscibility with HFC gases. Excellent Thermal Stability Sealed tube results (ASHRAE 97) indicate that Soles 180 provides excellent stability in the presence of HFC refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other materials of construction.
Solest 180 is a formulated VG180 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years service in the field. Designed to maximize lubrication in HFC systems, Solest 180 provides superior bearing protection with greater film strength than standard HFC lubricants. This product provides effective wear protection for steel and aluminum surfaces for increased system life and improved efficiency. This grade offers excellent resistance to dilution in HFC refrigerants. Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPI's laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point. Applications and Compressor Type HFC, HCFC, HFO Refrigeration Reciprocating, Screw, Centrifugal Compressors Features and Benefits Thermally stable Longer system life Improved oil management Efficiency gains Corrosion protection Enhanced system reliability and reduced down-time Excellent bearing lubrication Longer compressor Life Optimized System performance Reduced operating costs Environmentally friendly Biodegradable Excellent lubricity Increased efficiency, reduced cost of operation Outstanding Miscibility The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase. Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Solest 180, as a polyol ester has a controlled level of miscibility with HFC gases. Excellent Thermal Stability Sealed tube results (ASHRAE 97) indicate that Solest 180 provides excellent stability in the presence of HFC refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other materials of construction.
Solest 170 is a formulated VG170 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years service in the field. Designed to maximize lubrication in HFC systems, Solest 170 provides superior bearing protection with greater film strength than standard HFC lubricants. This product provides effective wear protection for steel and aluminum surfaces for increased system life and improved efficiency. Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPI's laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point. Applications and Compressor Type HFC, HCFC, HFO Refrigeration Reciprocating, Screw, Centrifugal Compressors Features and Benefits Thermally stable Longer system life Improved oil management Efficiency gains Corrosion protection Enhanced system reliability and reduced downtime Excellent bearing lubrication Longer compressor Life Optimized System performance Reduced operating costs Environmentally friendly Biodegradable Excellent lubricity Increased efficiency, reduced cost of operation Outstanding Miscibility The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase. Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Soles 170, as a polyol ester has a controlled level of miscibility with HFC gases. Excellent Thermal Stability Sealed tube results (ASHRAE 97) indicate that Solest�® 170 provides excellent stability in the presence of HFC refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other materials of construction.
Solest 170 is a formulated VG170 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years of service in the field. Designed to maximize lubrication in HFC systems, Solest 170 provides superior bearing protection with greater film strength than standard HFC lubricants. This product provides effective wear protection for steel and aluminium surfaces for increased system life and improved efficiency. Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPI's laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point. Applications and Compressor Type HFC, HCFC, HFO Refrigeration Reciprocating, Screw, Centrifugal Compressors Features and Benefits Thermally stable Longer system life Improved oil management Efficiency gains Corrosion protection Enhanced system reliability and reduced down-time Excellent bearing lubrication Longer compressor Life Optimized System performance Reduced operating costs Environmentally friendly Biodegradable Excellent lubricity Increased efficiency, reduced cost of operation Outstanding Miscibility The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase. Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Solest 170, as a polyol ester has a controlled level of miscibility with HFC gases. Excellent Thermal Stability Sealed tube results (ASHRAE 97) indicate that Solest 170 provides excellent stability in the presence of HFC refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other materials of construction.
Solest 120 is a formulated VG120 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years of service in the field. Designed to maximize lubrication in HFC systems, Solest 120 provides superior bearing protection with greater film strength than standard HFC lubricants. This product provides effective wear protection for steel and aluminium surfaces for increased system life and improved efficiency. Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPI's laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point. Applications and Compressor Type HFC, HCFC, HFO Refrigeration Reciprocating, Screw, Centrifugal Compressors Features and Benefits Thermally stable Longer system life Improved oil management Efficiency gains Corrosion protection Enhanced system reliability and reduced down-time Excellent bearing lubrication Longer compressor Life Optimized System performance Reduced operating costs Environmentally friendly Biodegradable Excellent lubricity Increased efficiency, reduced cost of operation Outstanding Miscibility The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase. Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Solest 120, as a polyol ester has a controlled level of miscibility with HFC gases. Excellent Thermal Stability Sealed tube results (ASHRAE 97) indicate that Solest 120 provides excellent stability in the presence of HFC refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other materials of construction.
Solest 120 is a formulated VG120 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years of service in the field. Designed to maximize lubrication in HFC systems, Solest 120 provides superior bearing protection with greater film strength than standard HFC lubricants. This product provides effective wear protection for steel and aluminum surfaces for increased system life and improved efficiency. Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPI's laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point. Applications and Compressor Type HFC, HCFC, HFO Refrigeration Reciprocating, Screw, Centrifugal Compressors Features and Benefits Thermally stable Longer system life Improved oil management Efficiency gains Corrosion protection Enhanced system reliability and reduced down-time Excellent bearing lubrication Longer compressor Life Optimized System performance Reduced operating costs Environmentally friendly Biodegradable Excellent lubricity Increased efficiency, reduced cost of operation Outstanding Miscibility The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase. Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Solest 120, as a polyol ester has a controlled level of miscibility with HFC gases. Excellent Thermal Stability Sealed tube results (ASHRAE 97) indicate that Solest 120 provides excellent stability in the presence of HFC refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other materials of construction.
