PRODUCT DATA SHEET ACID RESISTANT BRICK Material : RED SHALE Type Acid Resistant Brick Size (mm) 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK) Specification : ASTM C279, ASTM C410, IS 4860-1982 DESCRIPTION : We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required. FEATURES OF ACID RESISTANT BRICK: Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature AREA OF APPLICATION: Chemical Analysis (Average) Acid and Alkali Storage Tank Farms Demineralization plants and Water treatment plants Chimney inside lining, FGD linings Towers and Columns Process Vessels and Tanks Sewerage Treatment Plants and Lines Industrial Flooring and Bund Areas Chimney and Flue Gas Linings Hoppers and Chutes SiO266.4 Al2 0324 TiO21.1 Fe2 O31.1 K2 O + Na2 O2.5 NOT RECOMMENDED: HF acid or other fluoride solutions Heavy thermal shock Typical Physical Properties of GANESHAS Acid and Chemical Resistant Brick Characteristic RED SHALE ACID RESISTANT BRICK Test Standard Bulk Density, gm/cc - 2.3 to 2.35 ASTM C-20 -Water Absorption, % - 0.1 to 1.5 IS 4860-1968 Apparent Porosity, % -0.5 to 1.75 S 4860 Acid Solubility (H2SO4), Loss in Mass,% -0.1 to 1.8 ASTM C-279 Modulus of Rupture, PSI -2133 to 3555 ASTM C-67 Compressive Strength, Kg/cm2 - 700-900 IS 4860-1968 Abrasion Resistant , Volume in mm3 -69 to 85 EN 102 Surface Hardness, MOHS Scale - 7
PRODUCT DATA SHEET ACID RESISTANT BRICK Material : FIRECLAY Type Acid Resistant Brick Size (mm) : 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK) Specification : ASTM C279, ASTM C410, IS 4860-1982 DESCRIPTION : * We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required. FEATURES OF ACID RESISTANT BRICK: * Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature AREA OF APPLICATION: Chemical Analysis (Average) Acid and Alkali Storage Tank Farms Demineralization plants and Water treatment plants Chimney inside lining, FGD linings Towers and Columns Process Vessels and Tanks Sewerage Treatment Plants and Lines Industrial Flooring and Bund Areas Chimney and Flue Gas Linings Hoppers and Chutes SiO266.4 Al2 0324 TiO21.1 Fe2 O31.1 K2 O + Na2 O2.5 NOT RECOMMENDED: HF acid or other fluoride solutions - Heavy thermal shock Characteristic Fireclay Type Acid Resistant Brick - Test Standard Bulk Density, lbs/ft3 - 2.25 to 2.30 ASTM C-20 Water Absorption, % - 0.1 to 1.8 ASTM C-20 Apparent Porosity, % - 4.05 to 4.14 ASTM C-20 Acid Solubility (H2SO4), Loss in Mass,% - 6.1 to 6.8 ASTM C-279 Modulus of Rupture, Mpa - 14.6 ASTM C-67 Compressive Strength, PSI - 15500 to 17250 ASTM C-67 Abrasion Resistant , Volume in mm3 - 71 to 96 EN 102 Surface Hardness, MOHS Scale - 7 Thermal Conductivity, BTU-in/hr-ft-F - 6.94 to 7.12 ASTM C-236 Thermal Expansion Coefficient,in/in/Fx10-6 - 2.6 to 2.8 EN 103
Acid / Alkali Resistant Tiles/Bricks * Our Acid proof tiles, Acid alkali resistant tiles, Chemical resistant tiles are fully vitrified tiles which are manufactured using special non ferrous clay, processed at extremely high temperatures this process causes the raw materials to fuse and form a compact mass with an extremely low water absorption of less than 0.5% resulting in the formation of a very strong body with a flexural strength of 38 N/mm2, solid through color fade proof with a very hard surface Mohs hardness of 7. * The acid resistant tiles come in a range of sizes and thicknesses from ranging from 8-25mm. Our acid proof tiles meet stringent specification norms of IS 4457:2007 and relevant ASTM/DIN standards which ensure excellent performance in Acid/Alkali/Chemical (expect Hydrofluoric acid and its derivatives). Corrosion Protection Applications * Factory Floors subject to corrosion from Chemicals, Acids, Oil & Solvents * Pickling tank and surrounding areas * Food & Beverage Industry flooring * Battery rooms and Control rooms * Demineralization plants * Walls of washing and Paint shop areas * Acid Resistant Tiles Manufacturers India * Our acid proof tiles provide excellent abrasion resistance, anti-skid properties for worker safety and high aesthetic appeal. We also provide specialized corner tiles for reducing chances for acid attack through construction joints. Our standard sizes are 200x100, 200x200 & 300x300 millimeters.
Acetylated Distarch Phosphate (E1414) is used to stabilise oily foods. E1414 helps to emulsify fat and prevent it from separating. When added to foods, the modified starch forms gels and thickens the texture without having to be heated. E1414 is used in a variety of applications.
E-1414 - Acetylated distarch Phosphate - Potato Starch-Based - Cold Water Soluble APPLICATIONS As a Stabilizer and Thickener : It can be used in foods as a stabilizer in oily foods. STATHICK emulsifies fat and prevent it from separating from the products like Cream fillings, Fruit Pie fillings, Gravies, Sauces and Mayonnaise. When added to foods, the modified starch forms gels and thickens the texture without having to be heated. Better water holding capacity : Maintains high moisture content & lower oil uptake in the product. Give the product best Water Holding Capacity. For Gluten-Free Products: It can be used as a Gluten-Free substitute in various foods including Nuggets, Meat Balls, Cutlets, Chicken Finger, Popcorn, Sausages, Flavored Sausages and Ready to Fry Minced meats.
Las 4NF- Lactose Substitute Non- Fat Solid is an Enzymatically Modified, Clean Label, Vegan, Gluten-Free, Plant-based and Non-GMO starch used as a special additive for improving texture of Paneer. It is 100% naturally made which does not have any preservatives and Mono sodium Glutamate (MSG). APPLICATIONS 1. Milk is first heated (pasteurizing) to 85�°C and held for 12 minutes. 2. Add 2% to 20% of LAS 4NF based on the Protein Content of the Milk to the pasteurized milk and stir slowly to ensure full dissolving at 80C. 3. LAS 4NF itself contains coagulant. If necessary add coagulant as per the costumer requirement slowly to the milk by slow stirring, maintaining the temperature at 70�° C. 4. Keep Slow stirring for complete separation of solids and whey. (Indication: Whey will turn to light green color and small lumps of solids will settle down) 5. The whey water is filtered through a fine mesh of muslin cloth. The separated particles remain in muslin cloth and it is held in hoofer. 6. Apply pressure on the covered solid spread evenly on hoofer, with a flat lid in lay till water droplets stop. 7. Then the Paneer is pre-cooled in pure water at room temperature for 10 mins or till the external sides can be held in hand water for 10 mins , then dip in chilled water for 4 hours. DOSAGE Use 2 to 20% of LAS 4NF of total batch size, based on the protein content of the milk. For lower protein content in the milk higher LAS 4NF need to be used.
Palm kernel shell (PKS) is actually the by-product from palm oil industry, before the era for palm kernel shell being used as biomass, the oil palm owner will bury the palm kernel shell underneath the land and let it becomes black color palm kernel compost. This is sort of organic fertilizer but because of the hard shell, it takes much longer time for converting totally to organic fertilizer. It is well known biomass product because of it small in size and high in heat energy or calorific value. Palm kernel is kernel from oil palm fruit. After the oil palm fruit gone through the palm oil process, the kernel will be separated and kernel oil will further be distilled and it also gained it status as a bio fuel resource for biomass product. It also classified as a renewable energy that complies with country energy regulation, such as Japan, Korea and Europe. Palm kernel shell also consider as the replacement for wood chip. Gross Calorie Value : 3.600 Kcal , Moisture : 14-20% ( Maximum 20% due to rain ) , Impurities : < 3% ( Maximum 3%) , Ash Content : < 3% ( Maximum 5%) , Size : 4-20mm. , Sulfur : < 0.1% ( Maximum 1%) .
SauMix is a Vegan, Gluten-Free, Plant-based and Non-GMO starch which makes Soups, Gravies and Sauces - Tastier, Smoother, Thicker and Yummy. SauMix has excellent Shear Stability and Water Holding Capacity. SauMix is 100% vegetarian and naturally made product which does not have any preservatives and Mono sodium Glutamate (MSG). APPLICATIONS TOMATO KETCHUP & OTHER SAUCE: Mix 3-5 % of SauMix in partial amount of water and completely mix without any lump formation. Then add it along with remaining water to the sauce, after adding all other raw materials. TOMATO SOUP: Mix 2 -3 % of SauMix in required amount of water and add at the last of cooking for Soups. For Instant Soup mixes, Add required percentage of SauMix along with all dry ingredients and mix well. PREMIXES (INSTANT SOUP MIX, KETCHUP MIX, AND SAUCE MIX): Mix 3-5 % of SauMix at the time of blending while adding other raw materials FEATURES AND BENEFITS ï?? Improves thickness of the sauce, soups and ketchups. ï?? Better dispersion of spices and other ingredients uniformly. ï?? Improves smooth texture of sauce, soups and ketchups. ï?? Enhance product's flavor. ï?? Stable high viscosity. ï?? Excellent shear stability. ï?? Excellent water holding capability. During the shelf life, it maintains the consistency and avoiding the water separation. ï?? 100% Natural and 100% vegetarian product. DOSAGE For excellent results, use 3 to 5% SauMix of total batch size.
OPP and CPP is separate, no composite film Monthly 3-4 containers
PP roll, There is an aluminum layer on the outside that can be separated by hand. White milk
HDPE regrind & washed natural & white in separated big bags - All cold wash - IBC - MFI is between 0,1-0,4
Engineering grade purges, separated and labeled by gaylord box. with 10 to 20% glass fill.
- OPP and CPP is separate, no composite film - Origin: Japan - Color: Natural - Loading weight: 22-23MT
Specification: OPP and CPP is separate, no composite film Color: Natural Loading Weight: 23 MT
Mangoes Juice Machine fruit vegetable process,help people solve the hard thing of mango with big stone/seeds inside,direct out the mango juice,high efficient ,sanitary ,small machine low cost ! Technology : Slag liquid separation, rapid juice extraction. It is suitable for pressing fruits and vegetables with high pressure, and can complete multiple processes such as juice extraction, dehydration, filtration, and pressing at one time capacity 0.5-1.5T/hour ,power 0.5-7.5kw ,filter screen 0.6mm. welcome order
Mango peeling -removing seeds -in-one -machine,also can peeling many other kind fruits . Process flowing: automatically complete fruit feeding - fruit fixing - peeling - seeds discharging separation. Technology advantages :The machine has an adaptive function (that is, it can automatically cut mangoes as low as they are high and as thin as they are thick). Paramters: Capacity 1000pcs/hour Thickness: 1-3mm can adjustable Height of fruit 40-120mm Die of fruit 40-100mm Power 0.6kW 220V-50Hz Weight 320kg
Factory price vegetable current cleaning machine The whole production line are made SUS304 stainless steel ,with food safety standards.The use of high pressure bubble cleaning ,when the bubble is released in water,the material will be irregular strong turnover movement ,stirring effect .Effectively separate surface impurities to avoid damage to materials by touching ,knocking and scratching . Scope of application :clean vegetable processing ,central kitchen ,large dining canteen,catering chain ,food factory ,etc .
The whole production line are made SUS304 stainless steel ,with food safety standards.The use of high pressure bubble cleaning ,when the bubble is released in water,the material will be irregular strong turnover movement ,stirring effect .Effectively separate surface impurities to avoid damage to materials by touching ,knocking and scratching . Scope of application :clean vegetable processing ,central kitchen ,large dining canteen,catering chain ,food factory ,etc .
Fruit Vegetable Peeling Machine, pineapple peeling machine ,and so on lots of kind fruit /vegetable peeling machine . Watermelon peeling machine with half cutting function , Capacity 1-1.5T, bent straight, tall, thin, soft and hard can be peeled, with adjustable peeling thickness. The machine computer control has adaptive function (i.e. automatically adjust to low with height, fine with thickness, and straight with bending), and can be peeled with single or double knives. It is a key equipment for industrial processing of dried fruits and vegetables, slices, diced, strips, blocks, Rong, powder, preserved, and fresh cut. It is also compatible with 26 types of fruits and vegetables, including winter melon, watermelon, pineapple, papaya, grapefruit, and taro. Operation: Click on the touch screen - Set parameters - Place the fruit into the fruit holder - The machine automatically completes picking, delivering, peeling, and separating the material. Peeling and separating Processing capacity 500 pieces/hour Peeling thickness 1.5-10mm Adapt to fruit height of 80-400mm Adapted fruit diameter 80-250mm Power 1.5kw 220V/50Hz Weight 300kg Machine size 1.45 x 0.9 x1.7m
Specification: OPP and CPP is separate, no composite film Origin: Japan Color: Nature Loading Weight: 23 Tons Quantity: 46 Tons ( 2 Cont Available) Price FOB: 580-780 USD
