Laboratory Equipments Suppliers and Manufacturers

39- liters laboratory flotation machine is applied in ore dressing by the method of laboratory floating. It is concatenation floatation machine with several sets of machines. And the number of chutes is even from 1 to 10. It is left-type or right-type according to user's demand. Structure and features: Laboratory flotation machine with 39 liters is impeller mechanical flotation machine. It is composed by the following main parts: (1). Tank The tank 1 is welded with steel plate, using the impeller to stir, simultaneously inflating the air into pulp. In order to adjust the thickness of slurry surface in tank and foam layer scraped, the intermediate tank 15 is made up of two slot panels, in which is the pulp surface regulator 5 installed, orifice 17 is installed on the tank cover 14, which is used to prevent the chaotic movement of pulp affects on the bubble zone, the gangue is entrained mechanically to the concentrate. Basin liner 6 is equipped in the tank to prevent the tank bottom worn, basin liner can be replaced. Discharging port 8 is placed outside the tank bottom, which is used to storage water when cleaning. The pulp flows into the intermediate tank 15 and the end tank 3 from the overflow port on the panel, the catheters of the intermediate tank bottom and the cover 14 on the groove wall bottom are put into the next tank, which will flow continuously through all the tanks of flotation machine. The pulp is fed from the feed chute 3, is discharged from the discharging port 8 of the tailing 1, the feed port 16 is equipped in front and at the back of tank bottom, which is easy to change the technological process. (2)Impeller system Impeller system is installed in the center of the flotation tank, the vertical arrangement coiled impeller 9 which leaves are up is fixed at the bottom of the impeller shaft 10 and around the vertical shaft tube 12. The tube top is located over the pulp stone and foam layer, the tube bottom is bearing the cover 14. When the impeller rotates, the quantities of air can be absorbed along the vertical tube 12. The protective plate 4 is fixed under the cover 14, the gap between the protective plate and impeller is related to the aeration rate, its maximum gap is less than 3mm, if the gap is too large, it is necessary to replace the protective plate or be adjusted appropriately. The hole of vertical tube 12 is used to cycle pulp, and make the pulp and air mix well. The upper of the impeller shaft rotates in the rolling shaft 11 installed in the bearing shell, the bearing shell is installed on the beam 7. The pulley fixed at the top of the shaft makes the motor 18 rotating through the triangle belt, of which the tension can be adjusted by the nut 19. (3). Shaving foam device Foam is scraped using the rotary scraper along the flotation machine, scraper 20 is installed out of the discharging port. The pulley is installed at the end of the scraper shaft, which rotates through the driving of the worm reducer 21 and V-belt. Technical parameters (1)Tank size: L¡ÁW¡ÁH 315¡Á315mm¡Á527mm (2)The effective volume: 39 liters (3)The flow of the pulp is calculated according to the production capacity (4)Aeration rate: 35-45 liters / min (5)Impeller diameter:200mm (6)Impeller speed: 809m/s (7)Impeller circumferential speed:8.14m/s (8)Scraper rpm: big wheel/small wheel 21r/min /13r/min (9)Motor: Model y900l-4 voltage :220/380V. Power:1.5KW rpm: 1400 r / min (10)Assembly method: Left-style (11)The outline size of machine: H: 930mm, W: 762mm, L (including 2 slots)1081mm (12)Total weight:(including 2 slot motors).

Exporters & wholesale suppliers of physics lab equipments, barometer physics laboratory instrument, stereo microscopes. In our range of physic lab equipment, we offer equipment that are essential to perform various physical experiments. Physics laboratory equipment are made of high quality materials and designed for providing easy usage. Physics instruments suppliers, physics instruments, physics instruments india, physics instruments manufacturers, educational physics lab equipments manufacturers, physics lab equipments exporters Ambala. -

Detailed Product Description Features and Options of Lab batches of test Sand Mill 1. Stable structure; quiet running, flexible design and simple operation. 2. Use of very small grinding media to get high quality products. 3. The capacity reached in tests may be scale up to all production mills. 4. The cylinder is easy to assembly, dismantle, and clean. Formulation can be changed rapidly. 5. The material of chamber and impellers can be ceramic material/macromolecule material/super wearable alloy steel material according to customer's requirement. 6. Ideal cooling properties. Technical Parameter Model PowerKW) Speed(rpm) Processing capacity(L) Output Capacity(kg/h) Dimmension(mm) LSM-1.4L 2.2 1200/1500/1800 4~20 20~60 560X700X680

3/5 part differentiation, 19/20 parameters +3 histograms Double apertures for wbc and rbc/plt separately Whole blood and pre-diluted counting modes available for different patients' sample requirement 45/60 samples/hour throughput Optional barcode scanner, printer port and other enhanced functions. 14-25kg

Discrete automatic, random access with two independent discs and independent stirring needle 200-400 photometric tests per hour, more than 40 items on board Reusable reaction cuvettes with advanced 8 steps cleaning Automatic probe cleaning High sensitive liquid level detection Back spectrophotometry with 9 wave lengths, accurate testing result Light weight construction, flexible installation and maintaining. 100kg - 210kg

None None

This dental instrument is used to carve wax electrically and mold its form, featuring its availability for a variety of carving tips(6pcs), easy temperature control and precise waxing work. Excellent heat conductivity, lasting service life, and easy to use. Less temperature deviation by the constant supply of the dc voltage. Digitally visible temperature with choice of celsius or fahrenheit. Available to memorize the previous working temperature even after turning off power. Carton package.

With high intelligent, it can judge in time and solve automatically when it meet some small problems. It can make sure prevent tissue form being injured, can automatically track feedback, remove some error in accumulating, position orderly, operate reliably. The users can set two program and choose any one according to different tissue. If the power is switched off suddenly, the machine can go on work and correct mistake automatically when the power switch on again. The lcd is make the communication between user and machine easily. The sterilization system can clean , sterilize and exhaust the harmful air which exist from the evaporation of reagent . Technical data: 1)total containers: 12 (9 for reagent + 3 for medical paraffin) 2)station capacity:2000ml (1000ml for 12p) 3)processoring time: 0~99 hrs 4)temperature range: 0~99f¦ 5)delay boot -strap time set arbitrarily in 1~96 hrs (4 days) 6)hydraulic stop time: 20~120 seconds 7)remaining infiltration time; 20 seconds 8)tissue protective hydraulic: container 5 9)normal voltage and frequency: ac200fa 10% 50hz fa 1hz 500wfa 10% 10)temperature of environment: 0~40f¦

Motorized with 220 volt 50 hz motor in acrylic case with belt arrangement, removable polished aluminium metal sphere of 165mm dia at the top spherical discharger of 75mm dia mounted on a rod drilled at the end to take a 4mm plug. Gives a spark length of 70mm approx the main metal dome has a socket on top in which different accessories can be attached. One spare belt supplied. Complete with 3 core p.V.C covered mains cable for connection to main supply. All apparatus complete with accessories.

Laboratory & scientific equipments.

1641B BURETTE with rubber tubing connection, glass bead and glass tip , B grade 1641A BURETTE with rubber tubing connection, glass bead and glass tip, A grade 1642B BURETTE with straight stopcock, B grade 1642A BURETTE with straight stopcock, A grade 8642A BURETTE with PTFE stopcock, A grade 8642AB BURETTE with PTFE stopcock, A grade, amber glass 1644B BURETTE with blue line on milk white back, rubber tubing connection, glass bead and glass tip, B grade 1644A BURETTE with blue line on milk white back, rubber tubing connection, glass bead and glass tip, A grade 1645B BURETTE with blue line on milk white back, straight stopcock,Schellbach,B grade 1645A BURETTE with blue line on milk white back, straight stopcock,Schellbach, A grade 1647B BURETTE , with rubber tubing connection, glass bead and glass tip,B grade 1647A BURETTE , with rubber tubing connection, glass bead and glass tip, A grade 1648B BURETTE amber glass,with straight stopcock, B grade 1648A BURETTE amber glass,with straight stopcock, A grade 1651 AUTOMATIC BURETTE Pellet with reservoir, rubber stopper and pressure bulb 1652 AUTOMATIC BURETTE Squuibb with ground - in glass stopper and pressure bulb 1653 AUTOMATIC BURETTE Squuibb with reservoir, ground - in glass stopper and pressure bulb 1654 AUTOMATIC BURETTE amber glass with ground - in glass stopper and pressure bulb 1655 AUTOMATIC BURETTE with ground - in glass reservoir and pressure bulb 1657 AUTOMATIC BURETTE blue line on milk white back with ground - in glass stopper and pressure bulb 1658 AUTOMATIC BURETTE amber glass with ground - in glass stopper and pressure bulb 1661B MICRO BURETTE with wooden base 1661A MICRO BURETTE with wooden base 1663B MICRO BURETTE with side filling tube 1663A MICRO BURETTE with side filling tube, Fisher High quality with very competitive prices, welcome for the inquiry.

1503 Funnel, long stem 60 , Boro 3.3 Glass Description: The so-called "standard funnel" is the triangle funnel 60 degree angle. So 60 degree is designed to adapt to the angle that square or round filter paper folded once expanded into 60-degree angle into the inner wall of the funnel . This filter paper can relatively affixed to funnel, so the filter progress is sage and convenient. Standard funnel shape is similar with triangle funnel, except that the angle of the funnel is correct. There are 4 sizes are available: 50mm long stem funnel, 60mm long stem funnel, 75mm long stem funnel, and 90mm long stem funnel. Material: Boro 3.3 Glass Color: Clear Key Product Features: 1.Funnel is constructed with heavy uniform walls, molded rims, and fire polished stems to give a long service life 2.Funnels have a high resistance to chemical attack, and mechanical and thermal shock 3.High quaility pyrex glass 4.Cheap price 1504 Funnel, short stem 60�°, Boro 3.3 Glass Description: The Borosilicate Glass Short Stem Funnel is used for adding liquids or fine-grained materials to flasks and other narrow-mouth containers, and is available in various diameters. Its short stem helps reduce clogging and enables a quick transfer of hot liquids to minimize recrystallization within the stem. The funnel is made of borosilicate glass for durability and heat resistance. Funnels are commonly used in laboratory experiments and other scientific applications. There are 12 sizes available: 40mm short stem funnel, 50mm short stem funnel, 60mm short stem funnel, 75mm short stem funnel, 90mm short stem funnel, 100mm short stem funnel, 120mm short stem funnel, 150mm short stem funnel, 180mm short stem funnel, 210mm short stem funnel, 240mm short stem funnel, 300mm short stem funnel. Material: Boro 3.3 glass Color: Clear Key Product Features: 1.Funnel is constructed with heavy uniform walls, molded rims, and fire polished stems to give a long service life 2.Funnels have a high resistance to chemical attack, and mechanical and thermal shock 3.High quaility pyrex glass 4.Cheap price

Our factory is the largest, professional, and renowned laboratory glassware manufacturer and exporter in china. Our factory was established in 1967, with many years efforts, we have much experiences and strong technology to manufacture high quality products to meet the customer's different and strict requirements now. The products supplied by us are in good sales now in usa, france, italy, spain, ireland, russia, ukraine, turkey, iran, south africa, brazil, argentina, chile etc, and enjoy the excellent reputation. Our "huaou" brand is the china well-known trademark of laboratory glassware products which is issued by the chinese government (state administration for industry & commerce of the people's republic of china), it is the big honor and it is exclusive in all of laboratory glassware manufacturers in china now. The detailed products are including followings: 1) beaker, boiling flask, conical flask, volumetric flask, distilling flask, and retort flask, measuring cylinder (round or hexagonal base) 2) dropping bottle, reagent bottle, funnel, safety funnel, separate funnel, test tube, capillary tube, burette, pipette, condenser, desiccators, evaporating dish, and crystallizing dish 3) petri dish, drying tube, specimen jar, gas collecting jar, bell jar, and connecting tube 4) microscope slide and cover glass 5) porcelain crucibles and porcelain funnel, mortar etc. 6) plastic & steel. Quotation and samples is always ready for you. Oem is also welcome. Welcome for the inquiry. Michael yu Sales manager Exporting standard packing

m Dimension[mm]270*180*70, weight:3kg

Lab glassware Unit

* Dimension: L* 1500*850mm * Worktop: Phenolic resin/ Epoxy resin/ Ceramic * Frame: C-type/ H-type * Material: 1.0mm cold-rolled steel with epoxy powder * Accessories --PP sink --Solid brass faucet -- Eyewash --Water baffle -- Regent with temper glass layers --Steel service dropper

* Type: Bench mounted * Material: Full steel * Worktop: Phenolic resin/ Epoxy resin/ Ceramic/ PP * Sash: 6mm temper glass * Underneath cabinet: 2 pcs with 1.0mm cold-rolled steel material * Finish: Epoxy resin powder coating * Accessories Switch for 30W lamp and blower Cup sink& Water system Gas system Waterproof sockets 13A/ 16A

* Type: Bench mounted * Material: Full steel * Worktop: Phenolic resin/ Epoxy resin/ Ceramic/ PP * Sash: 6mm temper glass * Underneath cabinet: 2 pcs with 1.0mm cold-rolled steel material * Finish: Epoxy resin powder coating * Accessories Switch for 30W lamp and blower Cup sink& Water system Gas system Waterproof sockets 13A/ 16A