features 1) Roller crusher has the features of simple structure, and takes up smaller space, and the operation and maintenance of this machine is very convenient. 2) Roller crusher is equipped with safety protection device. 3) The operational cost is low, stable operation, high efficiency, saving energy, high crushing efficiency. 4) There is equipped dust-proof plant inside the machine and the sealing ability is excellent, so that there is little powder dust and lower working noises, so that the working environment is greatly improved. 5) The gap of the roll can be adjusted according to the requirement of the customers. Applications Roll crusher applies to crushing medium hardness materials such as coke, sinter, limestone,various metal ore and nonmetal ore.It is most suitable for medium and fine crushing in small and medium-sized nonmetal mines and chemical industry.The minimum size can reach 100 mesh.
250*400 jaw crusher 15kw motor max feeding size: 210mm output size: 0-50mm capacity: 8-30tph weight: 3tons
The production of gyratory crusher has a history of over 100 years. Compared with jaw crusher, its product size is uniform, wearing of crushing wall is small, operating rate is high and production capacity can reach up to 3-4 times. Since the direct turning mode is adopted for feeding, such production facilities as storage bin for raw ore and ore feeder can be omitted during coarse crushing of crushing production technology. It is the preferred typical equipment for large and medium sized mines and other industries for coarse crushing of various hard materials. Generally, the hydraulic gyratory crusher is produced to install the hydraulic device on lower part of its base to support the crushing cones. The safe insurance of crusher and adjustment of ore discharging mouth are realized by utilizing the hydraulic energy storage system. The unreliability of safety devices of original suspension shaft type gyratory crusher and shortage of troublesome adjustment of ore discharging mouth can be overcome to bring new life to the gyratory crusher. Model Power(kw) Eccentric distance(mm) cone rotational speed(RPM) Weight(T) Feeding size(mm) Max feeding size(mm) Discharge size(mm) Capacity(tph) PXZ0913(3565) 280 32 120-160 139 900 750 130-160 625-770 PXZ1216(4779) 400 38 110-155 229 1200 1000 160-190 1250-1480 PXZ1417(5587) 500 40 110-155 310 1400 1200 170-200 1750-2060 PXZ1518(5988) 600 42 110-150 380 1500 1250 180-220 2550-3650 PXZ1619(6393) 800 46 110-150 459 1600 1350 190-230 3550-4680 PXZ1719(6495) 1000 48 110-145 459 1700 1400 190-250 4250-6950
The production of gyratory crusher has a history of over 100 years. Compared with jaw crusher, its product size is uniform, wearing of crushing wall is small, operating rate is high and production capacity can reach up to 3-4 times. Since the direct turning mode is adopted for feeding, such production facilities as storage bin for raw ore and ore feeder can be omitted during coarse crushing of crushing production technology. It is the preferred typical equipment for large and medium sized mines and other industries for coarse crushing of various hard materials. Generally, the hydraulic gyratory crusher is produced to install the hydraulic device on lower part of its base to support the crushing cones. The safe insurance of crusher and adjustment of ore discharging mouth are realized by utilizing the hydraulic energy storage system. The unreliability of safety devices of original suspension shaft type gyratory crusher and shortage of troublesome adjustment of ore discharging mouth can be overcome to bring new life to the gyratory crusher. Model Power(kw) Eccentric distance(mm) cone rotational speed(RPM) Weight(T) Feeding size(mm) Max feeding size(mm) Discharge size(mm) Capacity(tph) PXZ0913(3565) 280 32 120-160 139 900 750 130-160 625-770 PXZ1216(4779) 400 38 110-155 229 1200 1000 160-190 1250-1480 PXZ1417(5587) 500 40 110-155 310 1400 1200 170-200 1750-2060 PXZ1518(5988) 600 42 110-150 380 1500 1250 180-220 2550-3650 PXZ1619(6393) 800 46 110-150 459 1600 1350 190-230 3550-4680 PXZ1719(6495) 1000 48 110-145 459 1700 1400 190-250 4250-6950
Auxein medical is an orthopedic implants manufacturers & suppliers company approved by iso 9001:2008, iso 13485:2003 & ce
Memory128 with date/time FunctionIrregular heartbeat detection (ihd) Measure range0 - 300mmhg Pulse rate40 - 200/minute ScreenLarge lcd display date/time, systolic, diastolic and pulse rate Size & weightSize/weight - 75x67x30mm/140g (included battery) PowerBattery ""aaa""x2, 3v dc AccessoriesCuff, instruction manual, storage case Packing20pcs/carton/5.8kg/42.2x40.2x14.2cm; 22, 000pcs/20ft; 44, 800pcs/40ft Packing20pcs/carton/5.8kg/42.2x40.2x14.2cm; 22, 000pcs/20ft; 44, 800pcs/40ft
3.6Frequency50 hz 3.7Power factor0.8(lagging) 3.8Phase/wire3 phase 4 wires 3.9IsolationH Size: 1630*730*1250 Weight: 800kg
Technical data Genset model 30gf Filter, fuel filter, oil filter The components of the genset (1) diesel engine; (2)generator; (3)generator; (4)control panel(with 320b controller); (5)silent box The accessories Wave pipe , curved pipe , muffler , accumulator and the connecting lines , shock-absorbing spacer , and data . Size: 1760*730*1250 Weight:850kg
1.Main technical data of gensets 1.1ModelCcfj50jy 1.2Prime power50kw/63kva elf-exciting 3.5Prime voltage230v/400v 3.6Frequency50 hz 3.7Power factor0.8(lagging) 3.8Phase/wire3 phase 4 wires 3.9IsolationH Size:1850*730*1250 Weight:1000kg
Main technical data of industry gensets 1.1ModelJgc75gf 1.2Prime power75kw/94kva 1.3Prime voltage230/400v wer90kw/112.5kva 2.4Governor typeElectronic 2.5Configuration4 cycle , 6 cylinder in line 2.6Air intake systemNatural aspirate 2.7Bore/stroke102¡¨¢120mm 2.8Displacement5.9 l 2.9Starting methodElectric 2.10Compression ratio16.5:1 2.11Fuel consumption214g/kw.H 3. Main technical data of alternator Alternator is selected the new type brushless alternator designed by us marathon electric, which has a unique design, advanced structure, small size, light weight, excellent performance, reliable running and easy-to-use operation. 3.1BrandMarathon 3.2ModelMp-75-4 3.3Prime power75kw/93.75kva 3.4ConfigurationBrushless , self-exciting 3.5Prime voltage230v/400v 3.6Frequency50 hz 3.7Power factor0.8(lagging) 3.8Phase/wire3 phase 4 wires 3.9IsolationH Size: 2180*790*1300 Weight:1450kg
Evacuated Tube Specification Diameter Length 47 x 1500, 58 x 1800. Vacuum degree Pa 5 x 10 -3 . Absorptivity >0.93. Emissivity
Disposable surgical face masks like 4ply, 3ply. fda, ce, iso approved masks.
Type IIR Surgical Face Masks. FDA Approved, CE, ISO 13485 Medical Devices/ ISO 9001:2018. 4 Layer PPE.
The Covid-19 Antibody Test Kit: CE Mark & CFDA Approved; 2. The 3-ply Surgical Grade Mask: FDA Approved, CE Mark, registered with the Therapeutic Goods Association in Australia, ISO and NIOSH. Classified as a Type II Surgical grade mask pursuant to the European Standard, EN 14683; 3. The KN95 FFP2 Mask (GB 19083): CE Mark and ISO standard, Hospital grade pursuant to GB 19083:2010 medical requirement standard. A medical grade mask recognised by the United States Food & Drug Association as the alternative to the N95 mask; 4. The KN95 FFP2 Mask (GB 2626): CE Mark and ISO standard, Protective / Industrial grade pursuant to its GB 2626-2009 requirement standard; & 5. 75% Alcohol Content Hand Sanitizer: FDA Approved and Certification ECM Mark, verified to standard BS EN 1276:2009..
European Standard Non Contact Infrared Thermometer with Advance chip core sensors with all required certifications FDA, ISO, CE, FC, MSDS and all other required certifications to get approved in US, Russia, Europe and Asia. It comes with all global certifications with 18 months warranty.
We are Manufacturer in India for 3Ply Mask with Melblown and Spun bond Non Woven fabric. Can supply 3 Ply mask as 2 million of every day capacity.
European standard non contact infrared thermometer with german sensors and fda, ce, fc, iso, msds approved, ir thermometer, 3 ply mask with melt blown and non woven spun bond fabric, mask, dental equipments.Manufacturer, fob services, distributors
Blue disposable surgical mask BFEâ?¥95%, 3 Ply Ear-loop, FDA, EN14683:2005, yy/t0969-2013 KN95 FDA, CE EN 149:2001+A1:2009 Safety goggles EN 166:2001 Face Shield Protective Coverall EN 14126:2003+AC:2004, EN ISO 13982-1:2004+A1:2010, FDA approved.
Superieur nitrile powder free (latex free) medical examination gloves, disposable & reusable isolation gowns. surgical (sterile), non surgical, and chemo gowns, level 2, 3, 4 barrier protection (ansi/aami pb70 astm/fda, ce, iso cert)., n95 niosh approved masks, kn95 masks (cdc/fda whitelisted), 3ply face mask and nonmedical, 3ply surgical mask (510(k)fda cleared), airqueen surgical masks (510(k) fda cleared), kids masks, face shields, coveralls, protective boots, goggles, surgical caps (skully & bouffant), shoe covers..
Atv/cross motorcycle helmet Dot approved, iso 9001, gb811-1998, ce
