Iron Ore Fe 62% Suppliers and Manufacturers

Our iron ore pellets and fines are made from magnetite and have high iron ore content pellets at around 67 percent concentration and fines over 70 percent. This means they have lower impact on the environment than competing pellets and products such as sintered hematite fines. Using pellets instead of sinter (slightly larger pieces of iron ore) in customers pig iron processes saves emissions at steel plants. The high concentration of iron combined with the carefully tested and balanced additives in our pellets also result in lower emissions in customers ironmaking processes.

Iron ores are the raw material used to make iron and steel. Iron ore production has significantly expanded in recent years, owing to increasing steel demands in developing countries, such as China. As the content of iron ore in deposits has deteriorated, low-grade iron ore has been processed. Iron ore concentrate is an output product from processed iron ores that have been milled (crush, grind, magnetic separation, flotation) to separate deleterious elements and produce a high-quality product. Sintering and pelletizing are economic and widely used agglomeration processes to prepare iron ore fines/iron concentrate for ironmaking use. The quality requirements of sinter and pellet, such as physical, chemical, and metallurgical specifications, depend on each ironmaking furnace, and those requirements influence the operation of the iron ore sintering and pelletizing plant. Researchers have usually focused on the effect of the chemical, physical, and mineralogical characteristics of iron ore on these steps and the consequences for sinter/pellet quality and sintering/pelletizing performance. The present Special Issue on Iron Concentrate Particles will summarize the progress achieved in the last five years.

IRON ORE PELLETS Fe 64% monthly volume 50,000 mt. Full specification is available on request, Iron Ore Pellets: Pellets are small balls of iron ore used in the production of steel. They are made with technology that uses the powder that is generated during the ore extraction process, once considered waste. The pellets are used in the production of steel which is used in the construction of bridges, cars, planes, bicycles, household appliances and much more. Product Type: IRON ORE PELLETS Fe (T) 64 % Si02 1.150 % Fe0 0.75 Max Ti02 0.021% Al2O3 0.319 % Ca0 1.170 % P 0.032 % S 0.031 % V205 0.004 % Cu 0.057 % N2O 1.290 % Mg0 0.069 % CCS 309 Size 16-19 mm - 7 % 09-16 mm -91 % 06-09 mm 2 % Tumbler Index- for above 6.3 mm 96.2 % - 95 % min Abrasion Index â??for 0.5 mm 3.8 % - 4 % max Sticking Index 950 deg C 20.1 % Bulk Density 2.17 % Compression Strength 270 Kg / Pellet / 150 kg / pellet Fines below 5mm (-) 5 mm 3 % max Reducibility index 55-65 % . NOTE: Interested parties please contact us with your LOI

Iron Ore, Manganese Ore,Chrome Ore, Iron Ore Lumps, Iron Ore Fines, Mill Scales, Copper Ore, Lead Ore. We sell iron ore, iron ore fines, iron ore lumps, hematite iron ore, magnetite iron ore with vairous grades, if you have such demand, pls feel free to contact us. Iron ore is the source of primary iron for the world's iron and steel industries. It is therefore essential for the production of steel, which in turn is essential to maintain a strong industrial base. Almost all (98%) iron ore is used in steelmaking. Iron ore is mined in about 50 countries. The seven largest of these producing countries account for about three-quarters of total world production. Australia and Brazil together dominate the world's iron ore exports, each having about one-third of total exports

Size Range 015 mm to 63 mm Moisture Content Typically 8 12 Bulk Density 20 to 25 tonnesm Angle of Repose 35 to 40 Specific Gravity 45 to 50 Porosity 35 to 40 Surface Area High Due to fine granularity Color Reddishbrown Abrasion Index Low Depends on mineral content Flowability Poor due to fine size

TOPGLO CORPORATION: Your Trusted Strength in Iron Ore Supply We TOPGLO CORPORATION take full pride of ourselves on being a leading global network of mining groups, specializing in the supply of high-quality iron ore ranging from Fe 60% to 67%. With a monthly shipment volume of approximately 1.2 million tons, we ensure that every step from production to inspection and execution is handled with the utmost care and precision. Quality Assurance: We maintain stringent quality control measures to ensure that our iron ore meets the highest standards. Customer Satisfaction: Our commitment to excellence ensures that each order is executed to the complete satisfaction of our clients. Get in Touch! For all your iron ore requirements, do not hesitate to reach out to us. We are here to serve you with dedication and professionalism.

We have a unique iron ore resource footprint with large, high-quality resource bases in South Africa and India. Demand for iron ore globally is largely dependent on the state of the steel industry worldwide and, more specifically, on that of the steel manufacturing sector in China. Brat supplies leading quality lump ore and also produces premium fine ore from the mines of its associate company in Goa, India.

This by-product derives from the iron industries and its a valuable material for melting and manufacturing of ferrock for construction purposes. As a leading supplier of eco-conscious materials, we take pride in offering a diverse range of recycled materials, including cryolite, carbon anodes, carbon dust, bath material, steel scrap, fine iron scrap, rebars and more. With a strong commitment to sustainability, our materials are engineered to meet the demanding needs of industrial projects while promoting environmental responsibility. Ferric oxide 59.60% Aluminum Oxide 13.90% Sulfur dioxide 11.86% Magnesium oxide 6.60% Silicon dioxide 4.20% Calcium oxide 2.70% Manganese(II) oxide 0.39% Nickel oxide 0.14% Chromic oxide 0.14% copper (II) oxide 0.08% Titanium dioxide 0.07% Potassium oxide 0.06% Strontium oxide 0.05% Vanadium oxide 0.03% Zinc Oxide 0.03%

This by-product derives from the iron industries and its a valuable material for melting and manufacturing of ferrock for construction purposes. As a leading supplier of eco-conscious materials, we take pride in offering a diverse range of recycled materials, including cryolite, carbon anodes, carbon dust, bath material, steel scrap, fine iron scrap, rebars and more. With a strong commitment to sustainability, our materials are engineered to meet the demanding needs of industrial projects while promoting environmental responsibility. Ferric oxide 59.60% Aluminum Oxide 13.90% Sulfur dioxide 11.86% Magnesium oxide 6.60% Silicon dioxide 4.20% Calcium oxide 2.70% Manganese(II) oxide 0.39% Nickel oxide 0.14% Chromic oxide 0.14% copper (II) oxide 0.08% Titanium dioxide 0.07% Potassium oxide 0.06% Strontium oxide 0.05% Vanadium oxide 0.03% Zinc Oxide 0.03%

Sponge Iron Fines