Ruik's Isolator & Polarization Beam Combiner Hybrid is one type of passive component, which combine the functions of Isolator and PBS. 1x2 Isolator Polarization Beam Splitter Features Applications Low Insertion Loss EDFA & Raman Amplifier High Return Loss Fiber Sensor High Extinction Ratio Coherent Telecommunication Systems High-Reliability Polarization Mode Dispersion Compensator High Stability Specifications Parameters Values Stage Dual Single Center Wavelength 1310,1550nm 1310,1550nm 1064nm Operating Wavelength Range ±20nm ±20nm ±5nm Typ. Insertion Loss at 23 0.55dB 0.45dB 1.8dB Max. Insertion Loss at 23 0.80dB 0.70dB 2.1dB Typ. Isolation 51dB 35dB 35dB Min. Isolation 42dB 20dB 25dB Min. Extinction Ratio at 2325dB 20dB 20dB Directivity 50dB Min. Return Loss 50dB Max. Optical Power(CW) 300mW Max. Tensile Load 5N Fiber Type Port1 & 2 PM Panda fiber Fiber Type Port3 - PM Panda fiber or SMF-28E or Hi1060 Operating Temperature -5~+70 Storage Temperature -40~+85 For device with connector, IL is 0.3dB higher, RL is 5dB lower, ER is 2dB lower. The default connector key is aligned to slow axis. Company introduction: High power Optical Fiber Components: -Optical Fiber Isolator, up 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In-Line Polarizer/Depolarizer; -In-Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patchcord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
Ruik's Polarization Maintaining Filter Coupler is one type of passive components, which divides the light into any proportions. PM Filter Coupler Features Applications Low Insertion Loss EDFA & Raman Amplifier High Return Loss Fiber Sensor High Extinction Ratio Fiber Optical Instrument Specifications Parameter Value Type - 1x2 2x2 Center Wavelength 1310,1550nm 1064nm 1310,1550nm 1064nm Operating Wavelength Range ±40nm ±20nm ±40nm ±20nm Max. Excess Loss 0.7dB 0.8dB 1.0dB 1.2dB Uniformity (only for 50/50) 0.4dB 0.5dB 0.6dB 0.8dB Coupling Ratio 01/99~50/50dB Min. Extinction Ratio at 23 20dB 20dB 18dB 18dB(Both axis working) Min. Extinction Ratio at 23 22dB(Fast axis blocked) Min. Return Loss 50dB Max. Optical Power(CW) 300mW Max.Tensile Load 5N Fiber Type Tap Port SMF-28E, Hi1060 or PM Panda fiber Fiber Type Port 1 & 3 PM Panda fiber Operating Temperature -5~+70 Storage Temperature -40~+85 For device with connector, IL is 0.3dB higher, RL is 5dB lower, ER is 2dB lower. The default connector key is aligned to slow axis. Company introduction: RUIK-Tech Communication is a manufacturer and supplier of Optical Passive Components with ISO9001:2015 certified. We design advanced and cost-effective passive components for various industries which include Fiber Laser, Sensing Applications, CATV, Telecommunication, Medical Systems, Gyroscope, etc. Our main products include High Power Components up to 100W (20kW), Polarization Maintaining (PM) and Single-mode Fiber Components with ranging from 780nm to 2000nm. We also provide Customized components to our customers. High power Optical Fiber Components: -Optical Fiber Isolator, up 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In-Line Polarizer/Depolarizer; -In-Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patchcord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
Ruik's polarization maintaining optical isolator is a device, which allows the light to transmit through the passive route from input to output, while blocking the reversed direction. PM Isolator (1064nm) Features Applications Low Insertion Loss Communication Systems High Return Loss Test Instruments High Extinction Ratio Fiber Sensor High Isolation Research High Stability & Reliability Specifications Parameter Value Stage Single Dual Grade P A P A Center Wavelength 1064nm Operating Wavelength Range ±5nm Typ. Peak Isolation 40dB 38dB 55dB 52dB Min. Isolation at 23 32dB 28dB 45dB 42dB Typ. Insertion Loss at 23 1.5dB 1.6dB 2.4dB 2.6dB Max. Insertion Loss at 231.8dB 2.2dB 3.2dB 3.4dB Min. Return Loss (input/output)50/50dB 50/50dB 50/50dB 50/50dB Min. Extinction Ratio at 23(only for B type) 20dB 18dB 20dB 18dB Min. Extinction Ratio at 23(only for F type) 22dB 20dB 22dB 20dB Max. Optical Power(CW) 300mW Max. Tensile Load 5N Fiber Type PM Panda fiber Operating Temperature -5~+50 Storage Temperature -40~+85 For device with connector, IL is 0.3dB higher, RL is 5dB lower, ER is 2dB lower. The default connector key is aligned to slow axis. Company introduction: RUIK-Tech Communication is a manufacturer and supplier of Optical Passive Components with ISO9001:2015 certified. We design advanced and cost-effective passive components for various industries which include Fiber Laser, Sensing Applications, CATV, Telecommunication, Medical Systems, Gyroscope, etc. Our main products include High Power Components up to 100W (20kW), Polarization Maintaining (PM) and Single-mode Fiber Components with ranging from 780nm to 2000nm. We also provide Customized components to our customers. High power Optical Fiber Components: -Optical Fiber Isolator, up to 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In-Line Polarizer/Depolarizer; -In-Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patchcord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
Working Princile of 980nm +1470nm diode laser machine Vascular Lesion Therapy 980nm laser is the optimum absorption spectrum of porphyrin vascular cells. Vascular cells absorb the high-energy laser of 980nm wavelength, solidification occurs and finally dissipated. Physiotherapy / Pain Relief 980nm infrared therapy is to use light biostimulation effects in pathology aspects promote renewable. Reduce inflammation, relieve pain. Fungal Nail Removal / Onychomycosis 980nm laser nail fungus treatment works by focusing light energy on the infected area, which creates heat and ultimately destroys the living fungi. Lipolysis 980nm & 1470nm optical fiber dissolving grease is using the theory of plasma solar-thermal dissolve fat dissolve technology, through to uniform liquefied fat cells, when the body's natural metabolism the liquefied fat out of the body. Cutting Mode The 980nm laser is absorbed by pigments in the target tissue, achieving the function of carbonization and segmentation. The 1470nm is absorbed and segmentation. The 1470nm laser is absorbed by water molecules in the target tissue, achieving the effect of vaporization isolation. Skin Rejuvenation 980nm laser can stimulate the dermal collagen growth while vascular treatment, increase epidermal. EVLT 1470 is based on the thermal effect of the laser: it's a thermal ablation of the vessel wall. The 1470nm, which has a higher absorption in the tissues, improves the post-op comfort for the patient, while ensuring the optimal efficacy of treatment. Dental Suitable for intraoral and extraoral soft tissues (including marginal soft tissues) and interdental gums and free gingival epithelial lining): resection, implant restoration, gingival sulcus... PLDD Percutaneous Laser Disc Decompression (PLDD) is a surgical method in which a laser probe is inserted into the intervertebral disc space and laser energy is applied to achieve decompression and neuromodulation, thereby reducing pain.
Overview MIC-OA series 1550nm erbium-doped fiber amplifier adopts low-noise pumping laseríóhigh-quality erbium-doped fiber and advanced microcomputer real-time monitoring circuits to ensure excellent performance. It is mainly used in large or medium sized HFC optical fiber transmission network. Features í±Adopts the latest 980nm¬p1480nm double-pumping laser technology for higher output optical power. í±Incorperates pumping laser and high-quality erbium-doped fiber to insure low noise, high efficiency of energy conversion. í±Perfect microprocessor automatic monitoring circuitry can monitor the operating status real-timely and precisely í±Front panel displays status and alarm. í±With standard RS-45/RS-232 interface, remote monitor conveniently. í±19ís1U case.
Ruik's bandpass filter device is designed to transmit the light of narrow bandwidth, blocking the others. BPF is applied in a fiber laser. High Power Optical Bandpass Filter Features Applications Low Insertion Loss Fiber Laser High Return Loss Test Instrument High Extinction Ratio Fiber Sensor High Reliability & Stability EDFA Specifications Parameter Value Center Wavelength 976, 1030, 1064, 1550nm Min. Pass Band Width (@-0.5dB) nm As Customized Max. Stop Bandwidth (@-25dB) nm As Customized Max. Insertion Loss of Passband 0.8dB Max. Polarization Dependent Loss at 23, only for PI 0.15dB Min. Extinction Ratio at 23, only for PM 20dB Min. Return loss 50dB Max. Power Handling (CW) 20W or Specified Max. Peak Power for ns Pulse 10kW or Specified Max. Tensile Load 5N Operating Temperature 0 ~ +65 Storage Temperature -40 ~ +85 With connectors, the handing power will be only 1W, IL is 0.3dB higher, RL is 5dB lower, ER is 2dB lower. The default connector key is aligned to slow axis. Company introduction; RUIK-Tech Communication is a manufacturer and supplier of Optical Passive Components with ISO9001:2015 certified. We design advanced and cost-effective passive components for various industries which include Fiber Laser, Sensing Applications, CATV, Telecommunication, Medical Systems, Gyroscope, etc. Our main products include High Power Components up to 100W (20kW), Polarization Maintaining (PM) and Single-mode Fiber Components with ranging from 780nm to 2000nm. We also provide Customized components for our customers. High power Optical Fiber Components: -Optical Fiber Isolator, up to 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In-Line Polarizer/Depolarizer; -In-Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patchcord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
Features·ª Low Insertion Loss deviation In-line Type and Adapter Type Application·ª In-line type Low insertion loss deviation High return loss Specifications·ª Fixed attenuation·ª1f=2f=3f=5f=10f=15f=20dBor optional Return loss·ªfª50dB·+PC·¼f=fª60dB·+APC·¼ Wavelength·ª1310nm or 1550nm
Laser modules, laser positioning device modules, laser aiming device modules, expander laser modules, infrared laser modules optical lens, laser diode modules: thioindigo red (650nm, 635nm), green light (532nm), infrared (808nm, 850nm, 980nm) wave band laser, divergence angle 0.1mrad, positioning device modules: thioindigo red (635nm, 650nm), green light (532nm), infrared (808nm, 850nm, 980nm) wave band laser, straight line 1/6000, line width 1mm-2.5mm, expander laser module:thioindigo red (635nm, 650nm), green light (532nm), infrared (808nm, 850nm, 980nm), ivergence angle 0.02mrad, light caliber 5mm-40mm. Infrared laser source: 808nm (power 200mw-5w), 850nm (5mw), 980nm(50mw-2w) divergence angle 8-18, lenses: optical alignment lens g1, g2, glass aspheric lense g3 set of lenses, optics reshaping lense.
Tee shirts, polo pique, polo shirts, rugby shirts, terry line, polar fleece line, sweater, shirts, hunting vest, shorts ( male * female), body warmer, windbreaker, jacket, parka, anorak, sportswear.
Mens thermal lined hooded top, fleece with sherpa lined jacket, polar fleece pullover & full zipper top, toddlers, kids, boys hoody, rib pant set, short set, polar dtm sherpa lined top, men & boys yarn dyed short sleeve and long sleeve shirt, men & ladies thermal underwear set, men, boys & ladies lounge pants, yarn dyed woven, twill shorts, crew neck tee flat back mesh.
Fabric: poly peach( micro fiber) Lining:180g polar fleece Size:185-190-195 Q'ty:4500pcs
Home textile products, towels, bathrobe, table cloth, napkins, kitchen towels, bed sets, waffel items fleece hoodie polo shirts. polar fleece shirts sherpa lined with hood shirts..
Maximum laser power: 50w Laser wavelength: 1064nm Beam quality m2:
XGIGAs 10Gb/s X2 transceiver module XGX2-1596-80D is a hot pluggable in the Z-direction module that is usable in typical router line card applications, Storage, IP network and LAN and compliant to X2 MSA. The XGX2-1596-80D is a fully integrated 10.3Gbit/s optical transceiver module that consists of a 10.3Gbit/s optical transmitter and receiver, XAUI interface, Mux and Demux with clock and data recovery(CDR). This version of XGIGA Inc. transceiver line uses an cooled 1550nm EML Laser Diode to achieve 80km over standard single mode fiber as 10GBASE-ZR of the IEEE 802.3AE.
R than it provide a accurate splitting in high-density output (like 8, 16, 32, 64 outputs). However, the most common type Parameter N¡¨¢8 N¡¨¢16 Nx32 Parameter N=1, 2, 4 N=1, 2, 8 N=1, 2, 16 N=1, 2, 32 Grade Grade a Wavelength (nm) 1310nm , 1550nm, 1310&1550nm, 1310&1490&1550nm fiber optical splitter Bandwidth (nm) 13/15¡¨¤40nm, 1490¡¨¤10nm Max.Excess loss 0.3db 0.45db 0.6db 0.78db Typical il 6.3db 9.5db 12.8db 16.2db Max.Il 7.8db 10.4db 13.8db 17.2db Polarization dl ¡¨¹0.2db ¡¨¹0.3db ¡¨¹0.4db ¡¨¹0.5db fiber optical splitter Uniformity(db) 1.2db 1.8db 2.4db 3db Thermal stability ¡¨¹0.2db /¡ãc ¡¨¹0.3db /¡ãc ¡¨¹0.4db /¡ãc ¡¨¹0.5db /¡ãc Directivity (db) ¡y60db Temperature(¡ãc) -40¡ãcto +85¡ãc Package type 1.Bare fiber 2.0.9/2.0/3.0mm loose tube, 3.Connector type: fc/apc, fc/pc, sc/apc, sc/pc, all are optional Pigtail length 1 meter, others on request Package 100¡¨¢80¡¨¢10mm 100¡¨¢80¡¨¢10mm 120¡¨¢92¡¨¢15mm 140¡¨¢115¡¨¢18mm fiber optical splitter Inner packing: pp bag or plastic module // outer packing: carton // special package can be customized. Notice: this connector would be charged by dimensions when shipped by courier.
Picosecond 2021 yiwu factory hot selling professional Picosecond laser Tattoo Removal Picosure Treatment Theropy: Picosecond laser uses very short pulse output mode, instead of thermal effect, by the principle of light mechanical shock wave, pigment is "shattered" into finely granular via focused energy, are more likely to be absorbed by the body metabolism. Picosecond laser will be to minimize the side effects of thermal effect, can achieve the goal of almost solve all kinds of pigment spots, is better than traditional laser spot whitening effect. Applications: Chloasma, coffee spots, freckles, sunburn, age spots, nevus of ota, etc Acne scars Skin whitening, fine lines removal All color of tattoo remove Advantages: Pigment clear rate is higher Pigment removal speed is faster Refused to stimulate melanin active again risk Remove melanin colleagues and start repair mechanism Don't damage the normal tissue Parameters: Wavelength 1064nm, 532nm,755nm Frequency 1-10Hz adjustable Laser output mode Flat top Energy 1000-2000mJ & 1064nm, 500-1000mJ & 532nm Pulse width 650ps & 1064nm, 550ps & 532nm Spot size 10mm
Specifications Maximum laser power: 12w Laser wavelength: 1064nm Beam quality m2: < 2.5 Q-switch frequency: 100khz Minimum q-switch laser pulse width: 25ns The largest q-switch peak laser power: 100kw Standard engraving range: 110x110mm / 200x200mm Minimum line width: 0.01mm Repeat accuracy: 0.001mm Total power: 2kw The demand for electricity: 220v 22v/50hz/10a.
Therapy Principle Use the selective absorption characteristics and the high peak value bursting effects of the laser beam to reach the therapeutic purpose.This therapy instrument uses the most advanced Q-switch technology which makes the laser energy released at a very short time, then forms a high peak power giant pulse. The pigment granules will rapidly expansion and breakdown after absorbed such huge laser energy in short time, and the cell framework will be fully preserved and repaired quickly, This could treat the pigment tissue and almost has no destructive to the normal tissues Product Characteristics 1. With dual-wavelength, terminal output power is tested by the SFDA testing center, the test result is 1064nm, 1000mJ;532nm, 500mJ. New international 7 articulated light conducting arm, only available on this system within china territory. 2. International purchasing components (Q switch and Polarizer is supplied by the international famous company)with good performance, the laser cavity mode selecting technique which makes the output laser beam has good light spot mode, light spot light intensity uniformly distributed and no hot light spot. 3. High purity green light with good therapy results. 4. Equipped with 7-joints light conducting arm, with energy and density automatically adjust rod. Easy to operate. 5. Encapsulated mechanical parts, with moistureproof, dust proof and deformation proof functions. Thus make sure the laser¡¯s life span longer, with less maintenance cost and better performance 6.Intelligent Cooling System , Excellent water cooling with intelligent alert system, more safety and longtime reliable working 7.8.0" TFT color touch screen and arm with diode laser beam guide, easy for operation 8. CE approval Therapy Scope 1. The laser wavelength of 1064nm applied to black pigment and blue pigment lesions located on the dermis, such as black tattoo, blue tattoo and tattoo eye line, and so on. Long pulse in non Q switched mode-to improve chloasma, large pores visible, remove fine wrinkles, smooth white skin and enhance skin elasticity. 2. The laser length of 532 nm applied to the red, yellow and brown pigment lesions and other colors pigment lesions located on the skin surface and small area lesions therapy, such as pigmentation on the skin surface, freckles removal Therapy Characteristics Strong power output make big spot size treatment available, and with adjustable power supply, spot size adjustable too. Pulse width less than 8ns, peak value can reach to hundreds omen, it is very effective when using to remove some deep-skin tattoo and Ota's nevus. Q-switch:yag laser quick remove tattoo, Amazing treatment resultsQ7 adopts the active EO Q-switch module with unique resonator technology to get stable high energy laser output. The giant laser pulse has only 6-8ns pulse width which produced the mega-watts level high peak power! With our special housing and hardware platform, Q7would be used in different application environment .It s very useful for some high humidity. Q7 Q-switched mode could produce high peak power pulse laser with ¡°ns¡± level narrow pulse width. It's helpful for the pigment disintegration without any side-effect. All the action is in a single pulse rather than coming from multi-pulse which will lead to longer effect time on skin. Main Technical Parameter Laser type Nd: YAG laser (Electro-Optic Q-Switched output mode & long pulse 0.3ms output mode) Laser wavelength1064nm/532nm Optical beam transmission7 joint light conducting arm, transmission efficiency more than 75% Light spot diameter with spot size adjustable therapy handpiece, light spot size adjustable from 1~7mm; with parallel light handpiece, spot diameter is 10mm Laser aiming red semi-conductor aiming beam, wavelength 650~670nm Laser pulse width 6~8ns Single pulse energy 1000mJ(1064nm)/500mJ(532nm) Repeat frequency 1~10Hz/1Hz step Cooling systemclosed inside circulation water and constant temperature condition system Dimension 500 900 910 mm3 Weight 85Kg Power supply AC220/110V 10%,50/60Hz. wooden
Overview: Dhodt-eoc is a converter for stm-1 converter electrical and optical interface conversion. It is designed for the pdh equipment coaxial interface and optical interface interconnect. Dhodt-eoc is an interface converter for stm-1 electrical and optical interface conversion.It is designed for the sdh equipment coaxial interface and optical interface interconnect, as well as the atm 155.520 mbps interface and sdh device interconnection. Complete loopback facility is supported for system diagnostic and commissioning.Compact casing and simple operation achieve the cost saving and investment protected. Features: 1. High reliability, comply with itu-t g.703 and g.957 2. Single fiber bi-directional is selectable 3. State-of-the-art design, ensure normal working under different environment. 4. Supports local and remote loop-back on electrical or optical interface for system diagnostic. 5. Suitable for sdh and atm 155.52 mbps interface interconnection. 6. Simple operation and maintenance 7. Compact design and low power consumption. Specifications: Electrical interface Standard:itu-t g.703 compliant Data rate:155.52 mbps Line code:cmi Physical connector:bnc coaxial Optical interface Standard:itu-t g.957 stm-1 Bit rate:155.520 mbps Coding:nrz Connector:sc Light source:laser diode Wave length:1310nm (typical), or 1550nm (optional) or single Fiber bi-directional (optional) Transmit power:-12dbm (1310nm) / -5dbm (1550nm) Receive sensitive:-36dbm (1310nm) / -38dbm (1550nm) Power supply Ac 220v10%, 50hz Dc¡¡ìc48v (optional) Consumption:5w Environment Temperature:050 Humidity: 90% (non condensing) Dimension Wd(mm): 245 x 215 x50 Carton.
Model,DN-20 Fiber laser marking machine Laser wavelength,1064nm Laser type,Fiber Laser power,20W Acousto-optic modulation frequency,20Hz-200kHz Max. scanning precision,8000mm/s Repeatable accuracy,0.001mm Min. letter,0.2mm Min line width,0.01mm Marking area,220 * 220mm Soft ware,English EZCAD ,easy to operate Cooling system,Air cooling Working Temperature,0-35 Working humidity,0-90%, with no condensation Power supply,220V/50HZ (Optional 110V/60HZ)
