High Density Fiberboard With Moisture Resistance Suppliers and Manufacturers

Commodity:Sodium persulfate Molecular Formula : Na2S2O8 Molecular weight : 238.13 Description Sodium persulfate is a white,crystalline,odourless salt.It is used as initiator for the Polymerization of monomers and as a strong oxidizing agent in many applications.It has the particular advantage of being almost non - hygroscopic,of having a particularly good storage stability as a result of its extremely high purity and of being easy and safe to handle. Transportation Road/Rail transport : GGVS,GGVE,ADR,RID/CLASS 5.1 Sea transport : GGV Sea/IMDG code : CLASS 5.1 Page 5185,UN no.1505 Water hazards class 1(slight water hazard) All information is given in good faith,but without warranty,since the conditions of use are outside our control. Verification by the user is recommended.Freedom from patent restriction cannot be assumed. Package (1) In 25kgs net multiple paper bags with one PE bag inner (2) In 25kgs net PE bags (3) In 25kgs net woven bags with two PE bags inner (4) In 1000kgs net big woven bags with one PE bag inner The above package is also with a pallet 1000kgs each. Storage NPS(SPS) is not combustible but assists combustion materials due to release of oxygen.Provided it is stored under appropriate condition.It must be stored dry in closed containers and protected from direct sunlight,heat and humidity.Impurities such as dirt,rust or traces of metal and reductants may cause catalytic decomposition.The product as supplied or in solution needs to be handled with appropriate care.The eye,skin and clothes must be protected when working with NPS(SPS) as damp powder or aqueous solution has a bleaching and slightly corroding effect. Application Polymerization : Initiator for the emulsion or solution Polymerization of acrylic monomers,vinyl acetate,vinyl chloride etc.and for the emulsion co-polymerization of styrene,acrylonitrile,butadiene etc. Metal treatment : Treatment of metal surfaces(e.g. in the manufacture of semiconductors; cleaning and etching of printed circuits),activation of copper and aluminium surfaces. Cosmetics : Essential component of bleaching formulations. Paper : modification of starch,repulping of wet - strength paper. Textile : Desizing agent and bleach activator - particularly for cold bleaching.(i.e.bleaching of Jeans). Others : - Chemical synthesis - Water treatment(decontamination) - Waste gas treatment,oxidative degradation of harmful substances(e.g.Hg) - Disinfectant ITEMS SPECIFICATIONS Appearance white crystalline salt Assay 99.0% w/w min Active oxygen 6.65% w/w min Chloride and chlorate(as CL) 0.005% w/w max Ammonia (NH4) 0.05% w/w max Manganese(Mn) 0.0001% w/w max Iron(Fe) 0.001% w/w max Heavy metals(as Pb) 0.001% w/w max Moisture 0.05% w/w max Decomposition of the product as supplied at above 65C Recommended storage temperature Normal Temperature Storage stability as from date of delivery 12 months

We supply high maltose corn syrup which improves the flavor, body, and texture of the food and imparts resistance to the color formation, moisture, absorption, and crystallization in finished products such as hard candies. This corn syrup provides exceptional stability, clarity, and brilliance in finished products. TEXTURE & FEATURE: Clear Colorless, Odorless Viscous Syrup, free from rancidity and foreign matter. APPLICATION: This high maltose syrup improves flavor, body, and texture at high sucrose replacement levels while imparting resistance to the color formation, moisture, absorption, and crystallization in finished products such as hard candies. It provides exceptional Stability, clarity, and brilliance in finished products.

High Density Polyethylene HDPE, used for production of various product such as plastic bottles, pipes, containers and more. We provide all types of High Density Polyethylene, HDPE 7000F , HMRCP 100N ( PE-100 ) , HFI 5110 , HF 4760 ( BL3 ) , MFI 3713, HD 52518 , HBM 5510 , HBM 4265 , HD 5000S , HD 60507

Explore the robust and versatile HDPE (high-density polyethylene) plastic offerings. Our colection includes a diverse array of HDPE product variants options tailored to meet your specific requirements.Each HDPE variant undergoes meticulous sourcing and rigorous quality assurance processes to ensure reliability and performance. Trust Gremlog Trading DMCC to deliver premium-grade high density polyethylene plastic , facilitating sustainable solutions and contributing to a circular economy

This product is made of high quality oxygen-free copper conductors, fluorinated plastics, Silicone rubber resistant to high / low quality materials as insulation and sheathing materials, Has good heat resistance, heat aging resistance and excellent electrical properties, Meet the conditions for saft operation under the particularity of wire and cable, and provides High cable life and improve the economic and social benefits.

Micro Silica Sand: Micro silica also known as fume, is an amorphous (non-crystalline) polymorph of silicon dioxide, silica. It is an ultrafine powder collected as a by-product of the silicon and ferrosilicon alloy production and consists of spherical particles with an average particle diameter of 150 mm. The main field of application is as pozzolanic for high performance concrete because of its extreme fineness and high silica. Applications : Silica is added to Portland cement concrete to improve its properties, in particular its compressive strength, bond strength, and abrasion resistance. These improvements stem from both the mechanical improvements resulting from addition of a very fine powder to the cement paste mix as well as from the pozzolanic reactions between the silica fume and free calcium hydroxide in the paste. Advantages : Addition of silica also reduces the permeability of concrete to chloride ions, which protects the reinforcing steel of concrete from corrosion, especially in chloride-rich environments such as coastal regions and those of humid continental roadways and runways (because of the use of deicing salts) and saltwater bridges.

Calcined Bauxite: Calcined Bauxite is obtained by calcining (heating) superior grade Bauxite at high temperature (from 850 oC to 1600 oC). This removes moisture thereby increasing the alumina content. Compared to an alumina content of about 57 % to 58 % in raw Bauxite, Calcined Bauxite has an alumina content of 82 % to 86 %. The heating is carried out in rotary kilns. Calcination is done at different temperatures ranging from 850 oC to 1600 oC depending upon the customer’s application. We export Calcined Bauxite for various applications such as refractory bricks, abrasives, steel polishing, etc. We provide consistency in quality and availability of Calcined Bauxite at extremely competitive prices. Applications of Calcined Bauxite: Refractory Grade Calcined Bauxite (CB - I and CB - II Grade) : To make refractory grade, Bauxite is thermally treated at 1600 oC to produce Calcined Bauxite where the Alumina content is mostly above 82%. Brown Fused Alumina, Proppants and Road Surfacing : To make the above grades, Bauxite is thermally treated at 1000 oC - 1200 oC to produce Calcined Bauxite where the Alumina content is anywhere between 80-88% depending on the requirement. Minimum Order Quantity : 1 Containers

Indonesia Origin MDF Manufacturer and Exporter ***** MDF Board Thickness from 2mm t0 25mm x 1220mm x 2440mm 0r 1830mmx3660mm ***** Flatt and Smooth surfaces by well sanded ***** made from Mix hardwood Fiber *** High Density vary from 720kg - 820kg /m3 depend on thickness *** All sizes available by demand *** also available Melamine face MDF ***** usage : Housing components - Furniture components - Carving purposes **** MOQ 48 cbm in 40ft *** Payment term only by 30% Deposit and 70% balance against copy of B/L after shipment released *** No L/C accepted due to high Banking fee & Complicated procedures

We Are Indonesia MDF MANUFACTURER ## Made from Mix Hardwood Fiber ## Density 720kg-800kg ## Usage for Furniture components - Decoration ## Housing components ## All sizes available ## MOQ 48 cbm in 40ft ## Price range depend on sizes from usd 190/cbm - usd 230/cbm FOB Indonesia main port ## Market oriented : Middle East ,Western Europe , Australia and South Africa ## Payment term by Bank transfer deposit 3% only , No L/C accepted

Dark Red Meranti = DRM ***** Origin Indonesia ***** Vary sizes by demand ***** 78mm x 86mm x 6000mm ***** Loading in 20ft = 24 m3 ***** Payment by Bank Transfer

We Are Indonesia MDF Board MANUFACTURER ## Made from Mix Hardwood Fiber ## Density 720kg-800kg ## Flat and smooth surfaces by well sanded ## Sanding paper number 240 ### High density ***** Usage Furniture components - Decoration ## Housing components ## All sizes available ## Special required sizes can be made ## MOQ 24 cbm in 20ft ## Price range depend on sizes from usd 150/cbm - usd 230/cbm FOB Indonesia main port ## Payment term by Bank transfer 30% Deposit and 70% balance agaist copy of BL only , No L/C accepted due to high Banking cost

Black pepper 500 G/L (FAQ) Moisture: 13.5% max Admixture: 1% max Density: 500 GL Min Packing: 25/50kgs PP bags/ Jute bag 60 kg/ Kraft bag 25 kg Container capacity: 14MT/20FT, 27MT/40FT

Black pepper 550 G/L (FAQ): Moisture: 13.5% max Admixture: 1% max Density: 550 GL Min Packing: 25/50kgs PP bags/ Jute bag 60 kg/ Kraft bag 25 kg Container capacity: 15MT/20FT, 27MT/40FT

Black pepper 570 G/L (MC): Moisture: 12.5% max Admixture: 0.2% max Density: 570 GL Min Light berries: 3% max Packing: 25/50kgs PP bags/ Jute bag 60 kg/ Kraft bag 25 kg Container capacity: 16MT/20FT, 27MT/40FT

Black Pepper 5mm BOLD High Quality from Vietnam Black Pepper 5mm BOLD from Kpro factory is first class, with dark and brown colour, big size. * Colour: Dark and brown colour * Moiture: 12.5% * Admixture: 0.5% * Density: 570 - 580 G/L * Size: 5mm min (80%) Free of Stone and Metal