This cable has been designed for long haul direct / backbone application. Our stranded loose tube design provides stable performance over a wide temperature range and is compatible with any telecommunications-grade optical fiber. Direct buried type fiber optical cable are designed for easy and economical installation.
The stranded loose tubes contain thixotropic jelly but the cable core is based on dry-block construction. Incorporation of dry water block technology eliminates the need for traditional jelly filled water blocking methods, thus providing efficient and craft-friendly cable installation.
The thixotropic jelly is used to fill the buffer tubes to prevent water ingress. Steel tape armoring provides a rodent protection, length markings in meters for easy determination of cable length. Extra strength cable can also be delivered with peripheral strength members.
Features & application
Excellent optical, mechanical & environmental performance
High strength-to-weight ratio
Csm dielectric type û fiber reinforced plastic
Dry block construction
High tensile strength
High crush strength
Corrosion resistance
Kink resistance
Very light weight
Very flexible & small bending radius
Long haul / backbone application
Junction communication systems
All dielectric applications
Catv applications.
Construction Parameters
Fiber Count As per CustomerÆs Requirement
No. of Loose Tube As per CustomerÆs Requirement
G.655 As per CustomerÆs Requirement
G.652 As per CustomerÆs Requirement
Loose Tube Material Polybutylene Terephthalate (PBT)
Loose Tube Filling Material Thixotropic Jelly
Filler Material Medium Density/High Density Polyethylene (MDPE/HDPE)
Central Strength Member Fiber/Glass Reinforced Plastic (FRP/GRP)
Armoring Corrugated Steel Tape Armoring
Peripheral Strength Member (if required) Aramid / Glass Yarn
Core Moisture Protection Methodology Dry Block Design, Water Blocking Yarns/Tapes
Outer Sheath Material High Density Polyethylene (HDPE)
Printing on Outer Sheath Engraved Hot Foil or Inkjet Printing
Nominal Cable Delivery Length (km) 4 KM ¦ 3%.
This cable has been designed for aerial application with flat type construction. Our stranded loose tube design provides stable performance over a wide temperature range and is compatible with any telecommunications-grade optical fiber. This aerial type fiber cable is designed for easy and economical installation with a sufficient tensile strength to overcome wind pressures and ice loadings.
Features & application
Excellent optical, mechanical & environmental performance
Csm dielectric type û fiber reinforced plastic
High tensile strength
High crush strength
Aerial application
Application in lan, wan, especially in ftth networks
Easy to clamp and install
Can bear ice loads and high wind pressures.
Construction Parameters
Fiber Count 02 to 12 Fiber
Fiber Type G.652.D
Loose Tube Material Polybutylene Terephthalate (PBT)
Loose Tube Filling Material Thixotropic Jelly
Sheath Material High Density Polyethylene (HDPE)
Printing on Outer Sheath Engraved Hot Foil or Inkjet Printing
Nominal Dimensions Width : 7.0 + 0.5mm , Height : 3.5 + 0.3mm
Nominal Cable Delivery Length (km) 2 KM + 3% .
Mechanical Characteristics
Tensile Strength (N) 600
Tensile Strength (N) (Installation) 1000
Crush Strength (N) 2,000
Minimum Bending Radius (mm) 75
Temperature Operating Range -10 to +70¦C.
G652D fiber optic cables represent cutting-edge technology tailored for the most demanding aerial and FTTH (Fiber to the Home) applications. Designed with precision and durability in mind, these cables offer outstanding mechanical strength, superior transmission characteristics, and long-term reliability.
Key Features:
*Single Mode G652D Optical Fiber compliant with ITU-T G.652D standards.
*Excellent Geometrical Precision: Cladding diameter of 125 ±1 m and coating diameter of 245 ±10 m with minimal non-circularity.
*Low Attenuation: 0.35 dB/km @1310 nm, 0.25 dB/km @1550 nm.
*Chromatic Dispersion Optimized: Especially suited for long-haul and high-speed data transmission.
*Zero Dispersion Range: Between 1302-1322 nm, ensuring minimal signal degradation.
*Durability in Extreme Conditions: Proven performance between -40°C to +85°C with less than 0.05 dB/km variation.
*Bending Resilience: 0.1 dB loss at 1550 nm under 60 mm diameter bend for 100 turns.
Fiber Count Diameter Weight Max Pulling Tension Safe Span (No Stay Wire)
12F 6.5 mm 36 kg/km 320 N 30 meters
2F-6F 6.0 mm 30 kg/km 300 N 30 meters
2F-6F 5.2 mm 23 kg/km 250 N 25 meters
2F-6F 4.7 mm 20 kg/km 220 N 25 meters
Applications:
*Aerial installation (ADSS & All Dielectric)
*Indoor/Outdoor FTTH setups
*CATV networks
*Suitable for spooling in drums (2000M+), coils (500-2000M), and customizable packaging
Invisible Fiber Optic Cable
Invisible optical cable is the abbreviation for transparent tight-buffered optical cable covered with hot melt glue. It is an optical cable composed of G657A1 G657A2 optical fiber, a transparent tight jacket layer, and a layer of hot melt adhesive. Each layer is extruded step by step using an extrusion process, with a nominal outer diameter of 1.2mm.
Characteristics:
1. Indoor wall tracking , invisible, look more neatly
2. Flexible TPU jacket , good to install in wall and roof
3. Bent insensitive fiber G657A1 / G657A2
4. Self adhesive , using hot gun to fix on the wall
(A)The galvanized steel strands for optical fiber cables are made of high-quality carbon steel wire rods through a series of processes such as heat treatment, peeling, water washing, pickling, water washing, solvent treatment, drying, hot-dip galvanizing, post-treatment, and wire drawing into the steel wires, and then twisted into stranded products.
The galvanized steel strand for optical cable is one of the basic components used in the Fig-8 self-support optical fiber cables for communication. As the suspension wire component in the optical cable, it can bear the weight of the optical cable and the external load in the optical cable, and can protect the optical fiber be free from bending and stretching, ensuring the normal communication of the optical fiber, and stabilizing the quality of the optical cable.
(B)The galvanized steel strands for optical fiber cables have the following characteristics:
1) The surface of galvanized steel wires in the galvanized steel strands have no defects such as overlap marks, scratches, breaks, flattening and hard bends;
2) The zinc layer is uniform, continuous, bright and does not fall off;
3) The surface of the galvanized steel strands is smooth, clean, free of oil, pollution, water and other impurities;
4) The appearance is round with stable size, high tensile strength and large elastic modulus.
2.Application
It is suitable for communication suspension wire unit of Fig-8 self-support optical fiber cables for outdoor telecommunications.
GYTS armored fiber optic cable
   1. Description
· Duct optical fiber cable, optical fiber cable, fiber optic cable, loose tube fiber optic cable
· GYTS Outdoor Aerial Optical Fiber Cable with Maximum Fiber Number of 288 CoresÂ
·Strength Member: Steel wireÂ
·Fiber: can choose SM 9/125 or MM: 62.5/125 ,50/125, OM1,OM2,OM3,OM4
 2. Characteristics
1.Low dispersion and attenuation
2.Good mechanical and temperature performance
3.High strength loose tube that is hydrolysis resistance
4.Special tube filling compound ensure a critical protection of fiber
5.With small cable diameter, light cable weight
6.Crush resistance and flexibility
7. The following measures are taken to ensure the cable watertight:
           * Loose tube filling compound
           * 100% cable core filling
Mido Agung Perkasa is distributor of Supreme Cables, which is a brand of best, premium, and high quality cables from Indonesia. With experience since 1970 and backed with technical assistance from Furukawa Electric Co Ltd Japan. We deliver high quality cables with competitive pricing due to having sister company of big copper mine.
Supreme Fiber Optics
4-12 Fibres
6-22 Tubes
9um (Single Mode)
50-62.5 um (Multi Mode)
Color Coded Fibers
Strength Members
Gel Filled Tube
Water Swellable Tape
PE Sheathed and Inner Sheathed
Aluminium Tape Screened
with Steel Wire Mesenger or Galvanized Round Steel Wire Messenger
MPO Fiber Optic Cable
MTP MPO fiber optic cable provide the higher bandwidth needed for HD conferencing and HDTV configurations. We offer MTP fiber optic cable in a variety of types and lengths; MPO stands for "Multi-Push-On-Over-Optical"; MPO fiber optic cable have a higher port density, and are available in a wide range of sizes.
MTP multi-fiber cabling system is ideally suited for a high density environment that demands space saving and innovative cable management solutions; MTP supports various connections from multi-fiber to single fiber out.
MTP (male or female) - MTP (male or female) OM4 12 strands Multimode ,LSZH jacket,Polarity B
Adss cable (all dielectric self-supporting aerial cable) is loose tube stranded. Fibres are positioned into loose tube made of high modulus plastics. The tubes are filled with a water-resistant around frp(fibre reinforced plastic) as a non-metallic central strength member into a compact and circular cable core. After the cable core is filled with filling compound, it is covered witha thin polyethylene (pe) inner sheath. After two layers of aramid yarns are applied in two directions over the inner sheath as strength member, the cable is completed with pe or at outer sheath.
Wooden drum or carton, 3000m to 5000m/drum or as you required
Feature:
High tensile strength due to aramid strength member;
Good flame retardant properties;
Stable temperature performance;
Excellent stripability with tight buffered fiber;
High uniformity of geometrical characteristics.
Application:
Indoor riser level and plenum level cabling;
Fiber jumper or pigtail;
Indoor riser level and plenum level cabling;
Interconnections between instruments and communication Equipment
Laser-Optimized Multimode Fiber Aqua Cord features 50/125-micron fiber for high-speed, high bandwidth data transmissions over 10 Gigabit Ethernet and Fiber Channel networks - the perfect solution for fiber cable runs between multiple backbone switches, hubs, and routers as well as higher end networking equipment. This LC-LC patch cable is housed in an LSZH (Low-Smoke, Zero-Halogen) flame retardant jacket, to ensure minimal smoke, toxicity, and corrosion when exposed to high sources of heat, in the event of a fire - an ideal solution for use in industrial settings, central offices, and schools, as well as residential settings where building codes are a consideration. Each Duplex 50/125 (OM3) Multimode Fiber Patch Cable is individually tested and certified to be within acceptable optical insertion loss limits for guaranteed compatibility and 100% reliability and is backed by our lifetime warranty.
5. Superiority of new product research and development;
6. Easy installation, facilitate moves, adds or changes.
Materical PVC, ABS
Color Yellow116c,Orange021c or Customization
Specification 60mm, 120mm, 240mm, 360mm, 600mm
Height 100mm
Length 2000mm, 3000mm or customization
Max Loading 120mm - Max. Working Load per 2 meter: 100KG
240mm - Max. Working Load per 2 meter: 220KG
360mm - Max. Working Load per 2 meter: 300KG
Package 5 layer double corrugated standard export carton
Pallet avaliable necessary
Delivery 40HQ-7 to 15 day after received deposit
Products Certificate ROHS, CE, UL94-V0, LSZH
Manufacture System Certification ISO 9001:2008 Quality Management System Certification
ISO 14001 Environmental Management System
For all your solutions regarding optical fiber cable installations works and suitable equipments for installations , accessories like ducts , couplers , split metallic couplers , cable 'u' seals , pneumatic powered cable blow equipment ( indigenous designed , developed and marketed by us having good performance at field trials and in actual usage for the past two years).
Wooden packing suitabe for shipment with PVC covered.
The coloring fibers are positioned in a central loose tube. The PSP is longitudinal covering. Parallel steel wire is inside the PE sheath. Between steel strip and loose tube is filled with a water-blocking compound.
Characteristics:
Good mechanical and temperature
resistant performance.
Crush resistance, water blocking and flexibility
Geometrical Characteristics:
Number of Fibers 2-12
Cable Diameter (mm) 9.8
Cable Weight (kg/km) 110
Mechanical Characteristics:
Max Load (N) Long Term 600
Short Term 1500
Crush Resistance (N/100mm) Long Term 300
Short Term 1000
Bending Radius (MM) Dynamic 100
Static 200
Fiber Cladding:
Fiber Type (core/cladding dimension) 8.3/125, 50/125, 62.5/125
Transmission Characteristics:
SMF 50/125 62.5/125
1310/1550(nm) 850/1300(nm) 850/1300(nm)
Max. Attenuation (dB/km) 0.45/0.30 3.5/1.5 3.5/1.5
AVG. Attenuation (dB/km) 0.40/0.25 3.0/1.0 3.0/1.0
Min. Bandwidth (MHz/km) 400/400 160/500
Environmental Characteristics:
Storage/Operating Temperature -40íµí½+70íµ
