Gold Shaking Table Suppliers and Manufacturers

Description Jaw crusher has the features of great crushing ratio, uniform size of products, it mainly used to crush kinds of mining stones primarily, it can be used to crush material its compressive resistance not more than 320MPa. The jaw crusher is widely used in mining, metallurgical industry, building material, highway, railway, and chemical industry. The motor transmits power through belt, drives the moving jaw do periodic motion to the fixed jaw surround the eccentric shaft. The angle between toggle plate and moving jaw increases when moving jaw moves up. So the moving jaw closes to the fixed jaw. The stuff will be crushed in this process. The angle of Jaw Crusher between toggle plate and moving jaw decreases when moving jaw moves down, the moving jaw of Jaw Crusher moves away from fixed jaw by the pulling of rod and spring, the products after crushing will be discharged from the outlet of Jaw Crusher. Advantages and Characteristics 1 Simple structure, easy operation and maintenance, the downtime is greatly reduced; 2 Moveable jaw assembly adopts high quality casting steel, heavy eccentric shaft adopts forging steel processing, the machine with transcendental stability; 3 Adopt more durable eccentric shaft bearing, so the bearing capacity is big.

Application:mines, universities and colleges, scientific research. The main models: the XFD single slot flotation machine, FX mechanical agitation of continuous flotation machine, XFDC single slot flotation machine, KC Precision Vertical flotation machine, XFG hang slot flotation machine, XFL ring shot continuous flotation machineseries of experiments with the flotation machine. ModelVolume of tankImpeller diameteImpeller speedScraper speedPowerOverall dimensionsWeight UnitLmmr/minr/minwmmkg XFD0.5L1.5452130-259015/3090635/338/70030 XFD0.75L0.75452130-259015/3090635/338/70030 XFD1L1551700-210015/3090635/338/70030 XFD1.5L1.5601590-191015/3090635/338/70033 XFD3L3701544-18908/20120683/350/82250 XFD8L810014008.6/13/17250740/350/86771

The crushing effect is good, good sealing performance, no adhesion or blocking material, with clean, widely used in various industries crushing sample preparation work.

The series of products are used for crushing various ores, and metallurgy, mine, chemical, building materials, refractories, ceramics and other production departments and scientific research laboratory units can choose.

Main features: 1, suitable for crushing hard or brittle materials; 2, continuous error reduction, crushing, and avoid manual operation; 3, reduction of the material after the sample is representative; 4, sealing design, no dust pollution, easy to clean, environmentally friendly requirements; 5, only placed at ground level, without a fixed infrastructure can work normally.

Our Saw-tooth Wave Jig is a new type of energy saving and high efficient gravity separation equipment and developed based on the traditional Sine Wave Jig. The difference between Saw-tooth Wave Jig and Sine Wave Jig is that the pulsation curve for jigging is saw-tooth wave shape, with speedy upward flow and slow downward flow. Descriptions Our Saw-tooth Wave Jig is a new type of energy saving and high efficient gravity separation equipment and developed based on the traditional Sine Wave Jig. The difference between Saw-tooth Wave Jig and Sine Wave Jig is that the pulsation curve for jigging is saw-tooth wave shape, with speedy upward flow and slow downward flow. Bed layer is elevated integrally and slowly dropped with a long effective loose time, allowing significant increase of handling capacity for unit screen surface, decrease of lower limit of grain size recovery and large save of make-up water for under size fraction. In practice, contrast of Saw-tooth Wave Jig and Sine Wave Jig shows up raises of recovery of Saw-tooth Wave Jig: Sn:3.01%, W:5.5%, Pb:1.63%, Zn:2.04%. Advantages and Characteristics 1 High capacity 2 High concentration ratio and high recovery 3 Easy to install, operate and maintain 4 The pulsation curve is saw-tooth wave shape facilitate heavy mineral to settling 5 Saving water 30-40% than ordinary jig 6 The pulsation speed very easy adjusted by regulator 7 Can achieve a good result in processing such as placer gold, tungsten,iron, tin, hematite, copper, tantalum-niobium, titanium, manganese, barite, zirconium, chrome and gemstone etc

Trommel screens provide a simple, efficient and economical solution to upgrade a wide rang of material and optimize the subsequent process steps of recovery. This method of screening helps to reduce operating and investment cost and to increase product quality, while allowing rapid and large volume processing. Descriptions Material feeds into the drum, is lifted up by the rotation as it falls back down. This action is repeated with each revolution along the length of the drum. The finer material passes through the screen openings while the larger material tumbles towards its eventual exit at the rear of the drum. The trommel screens provide a simple, efficient and economical solution to upgrade a wide rang of material and optimize the subsequent process steps of recovery. This method of screening helps to reduce operating and investment cost and to increase product quality, while allowing rapid and large volume processing. This material is then passed on to the downstream process equipment which can be in various forms such as centrifugal concentrator, spirals, jigs etc. Advantages and characteristics 1 economical and efficient solution for screening; 2 heavy duty trommel drum with lifters at the front to facilitate material break up; 3 screen replaceable for different mesh sizes; 4 multilayer screens; 5 easily change screen plates; 6 high efficiency and big capacity; 7 unique screen design, result in higher capacities, longer screen life and no material clogging; 8 heavy duty feed hopper; 9 discharge chute; 10 gear drive mechanism. Main technical parameters

Descriptions The rotary scrubber is an autogenous rotating drum scrubber, utilizing pebbles and rocks within the feed source to fracture and disintegrate clays, agglomerates and soft oxides. The scrubber spins slowly, similar to a giant washing machine. It churns the fines and oversize and water together, vigorously breaking up the soil matrix as well as liberating the target mineral from tough clay, schistâ??s and rock. Disintegrated material is homogeneously slurried within the drum, whilst the autogenous load is retained within the drum by reverse flights located at the drum discharge end. Slurry and washed oversize overflows the drum discharge throat to the concentric exit trommels. This material is then passed on to the downstream process equipment which can be in various forms such as centrifugal concentrator, spiral chute, jig etc. Advantages and Characteristics 1. Designed to break up alluvial gravels, clays and sand; 2. High capacity and high scrubbing power; 3. The long drum of the scrubber retains material for longer, more vigorous washing for complete separation; 4. Thickening type steel plate for the drum; 5. Heavy duty bearing, gear and roller; 6. Wearable screen at the exit of drum for screening; 7. One high output electrical motor driving a gear system providing efficient torque; 8. Adjustable rotary speed; 9. The water with high pressure flushed the inwall of drum; 10. Can accept material up to 230mm.

Description Log washer is mainly used to wash the manganese ore, iron ore, phosphate and other minerals, it is usually used to clean and separate the silt and stains from manganese ore, iron ore and other low-grade mineral. Also it suitable for scrubbing material which contains tough insoluble clays, conglomerates or soft stone. This machine drive the spiral stirring shaft depends on speed reducer and rotate in different directions, and the minerals which enter the tank were washed by water and stir strongly by blade. The sewage was overflowed at the end of tank, the cleaned minerals were lifted up along the blade and discharged at the beginning of tank. Advantages and Characteristics 1 Durable washing and conveying paddles 2 Fabricated with heavy duty shafts 3 Oversize bearings and gears

Description It applies to all kinds of metal ore, is mainly used for mix chemical agent and slurry for flotation , also can be used for the agitating for other non-metallic minerals. It used for the slurry which density less than 30% (by weight) and particle size less than 1mm. It is flat-bottomed bucket with radiation circular spiral impeller and mechanical agitation. Main Technical Parameters Model XB-1000 XB-1500 XB-2000 XB-2500 XB-3000 XB-3500 XB-4000 Effective Volume (m) 0.7 2.6 5.6 11.2 19.0 31.5 45.0 Impeller Dia (mm) 250 400 550 650 750 850 1000 Speed (r/min) 530 340 290 270 250 230 210 Model Power (kw) 3 5.5 7.5 15 18.5 22 22 Trough internal size Dia (mm) 1000 1500 2000 2500 3000 3500 4000 Height (mm) 1000 1500 2000 2500 3000 3500 4000 Dimension Length (mm) 1240 1846 2421 2966 3500 4000 4520 Width (mm) 1130 1738 2166 2716 3516 3790 4320 Height (mm) 1501 2265 2846 3528 4446 5020 5567 Weight(Kg) 470 1000 1500 3400 5190 7280 12510

Description It is one kind of feeder as collection ore belt type conveyor for the ball mill, because the structure is simple, easy to operation, less power consumption, the feeding quantity can be evenly controlled, so it obtains widespread application. Main Technical Parameters Model Entrance size (mm) Exit size(mm) Swinging (mm) Swinging frequency (mm) Max Particle size (mm) Productive capacity (t/h) Motor (kw) Weight (kg) 300 300 300 300 300 125 0~90 68 100 8 1.1 213 400 400 400 400 400 50~150 0~170 47 35 12 1.1 272 600 600 600 600 600 150~150 0~206 45.5 50 25 1.5 558

Description The trough feeder used for feed massive material to receiving machinery from hopper, it is widely used to feed large size material (undressed ore and so on) into primary crusher of metallurgy, mine, chemical industry, building, dressing, coal ,and so on. Main Technical Parameters Model Entrance size (mm) Exit size (mm) Swinging (mm) Swinging frequency (mm) Max Particle size(mm) Productive capacity (t/h) Motor (kw) Weight (kg) 400*400 400*400 400*400 12 18.2 100 25-30 1.1 535 600*500 600*500 600*500 10-50 38.9 200 10-50 4 1054 980*1240 980*1240 900*800 20-50 23.7 350 36-90 7.5 1676

Description Rock hammer crusher can crush ore which is below 50mm or the tailings, middlings which in the uncompleted ore. And break up the useful metal from the ore, depending on the requirement of factory, it can crush the mineral particles in 1 to 180 mesh, and separate them in the shaking table. They are suitable for the small factory, and same times can take place of ball mill in some degree, Easy installation, easy operation, less investment, fast effect. The rock hammer crusher consist of rotor which with hammer, and the rotor consist of spindle, disk, pin and hammer. The motor drives the rotor to rotate at a high speed through the belt, the material enter the machine through the feeding port the rotating hammers with high rotation speed are crushing them, the small size mineral was discharge through the sieve and the large size still was crush and beat in the sieve until the crushed products meeting the required size can be discharged by the outlet and become the final products. Main Technical Parameters Model Capacity (T/h) Feeding Size (mm) Discharge Size (mm) Power at user option Motor (Kw) Diesel 200 500 1-2 50 1.8 15-18 24 300 500 3-6 50 1.8 18-22 30 400 600 5-10 50 1.8 25-30 45

Saw-tooth Wave Laboratory Jig is a new type of energy saving and high efficient gravity separation equipment and developed based on the traditional Sine Wave Jig. The difference between Saw-tooth Wave Jig and Sine Wave Jig is that the pulsation curve for jigging is saw-tooth wave shape, with speedy upward flow and slow downward flow. Advantages and Characteristics 1 High capacity 2 High concentration ratio and high recovery 3 Easy to install, operate and maintain 4 The pulsation curve is saw-tooth wave shape facilitate heavy mineral to settling 5 Saving water 30-40% than ordinary jig 6 The pulsation speed very easy adjusted by regulator 7 Can achieve a good result in processing such as placer gold, tungsten,iron, tin, hematite, copper, tantalum-niobium, titanium, manganese, barite, zirconium, chrome and gemstone etc Main Technical Parameters Model Hutch Diaphragm Feeding Size (mm) Makeup water (m3/t) Makeup water pressure (Mpa) Capacity (t/h) Power (kw) Dimensions (mm) Weight (Kg) Shape Area (m2) Stroke (mm) Frequency of stroke (r/min) JT0.57-1 Trapezoid 0.57 8.5 12 10 17 12-21 80-180

XFG series hanging cell flotation machine is used in the geological, metallurgical, building materials, chemical industry, mining and scientific research institutions, laboratory for stirring scrubbing, separating and cleaning minor samples. It uses the technology of frequency conversion stepless speed regulation, impeller, digital display, accurate adjustment.

All types of salt pure dried vacuum sal, pure vacuum dried iodized / non iodized salt, pellets salt ( for several industries : food industries, chemical industries, water treatment, petrochemical, textile, refined salt, fine refined iodized salt ( table salt ), coarse refined iodized / non iodized salt ( kitchen salt ), coarse refined non iodized salt ( over size ) ( for several industries, fine salt : fine iodized / non iodized salt ( several industries , washed salt : washed iodized / non iodized salt, crushed washed salt, raw salt, raw salt, raw material, road salt ( de icing salt), crushed raw salt.