Multi Layers 1-2-4 PCB Material FR-4 Available Color Green, Red, Yellow, Blue, White, Black Silk Screen White, Black (For White Solder Mask only) Maximum Size 45cm X 120cm Minimum Qty 10pcs Board Thickness 0.6mm,0.8mm, 1.0mm, 1.2mm, 1.6mm Thickness Tolerance (t=1.0mm) ± 10% Thickness Tolerance (t8mil) Minimum Track/Vias Space 6mil (Recommend >8mil) Minimum pads Space 8mil Minimum silkscreen text size 32mil Out Layer Copper Thickness 1oz(35um) Inner Layer Copper Thickness 17um Drilling Hole (Mechanical) 0.3mm—6.35mm Finish Hole (Mechanical) 0.8mm—6.35mm Drill Diameter Tolerance (unplated) 0.05mm Drill Diameter Tolerance (plated) 0.1mm Outline Tolerance (Mechanical) ±0.20mm Aspect Ratio 8:1 Solder Mask Type Photosensitive ink SMT min Solder Mask Width 0.2mm Min Solder Mask Clearance 0.2mm Solder Mask Thickness 15um Surface Finish HASL, HASL (Lead Free) +$10, ENIG+$16.
4-layer printed circuit board with selective hard gold coating 50 micro inch (1.25 micrometers) Pcb p / n: 842378 1. Number of layers: 4 layers 2. Material: fr4 Thickness 3.Board: 1.6mm 4. Copper thickness: 1/1/1/1 ounce of copper 5. The minimum drill size: 0.2 mm 6. Minimum track and clearance: 0.125 mm 7. Surface: submerged gold + selective solid gold 8.Green soldering mask 9.Special technology: selective solid gold coating up to 50u "(1.25um) 10.Applications: consumer electronic products 11.One stopping the turnkey service of ems, including the purchase of materials, smt and through assembly, assembly of prefabricated boxes 12.Ul is recognized and complies with rohs requirements.
1. Layer count: 1-30 layer. 2. Board thickness: 0.1-6.5MM 3. Impedance control:+/-5% 4. Min line width/space of outer layer 4/4mil 5. Min line width/space of inner layer : 3/3mil 6. Max size :24¡±x40¡± 7. Min hole dia. : 0.2mm (normal) , 0.075mm(laser drilling) 8. Toleranceof hole dia. : +/-2 mil 9. Max copper thickness : 8 oz 10. Base Materials :CEM1, FR1, FR4, Rogers, Arlon, Taconic etc. 11.Surface finishing : HAL, HAL Lead free,Immersion Gold,Immersion silver etc. vacuum
Quick Details Place of Origin: Liaoning, China (Mainland) Brand Name: GESP Model Number: 2 Layer Pcb Base Material: FR-4 Copper Thickness: 0.25 Oz -12 Oz Board Thickness: 1.6mm-3.2mm 0.2mm-4.5mm Min. Hole Size: 0.15mm Min. Line Width: 5mil Min. Line Spacing: 4 mil Surface Finishing: HASL/enig/OSP/immersion silver /gold finger Base Material:: FR-4,CEM-3, Roger,teflon , taconic,arlon , Metal/ceramic/aluminum base Copper Thickness:: 0.25 oz -12 oz Board Thickness:: 0.005 Certificate:: ISO/UL/RoHS/TS16949 Gold thickness:: 0.05UM V-cut Scoring:: YES Standards:: IPC Class 2, Class 3 Max. Panel Size:: 22 Impedance Control: yes Surface Finishing:: HASL Lead Free/OSP/Soft Gold/Hard Gold
Teson tech is a professional pcb & pcba factory located in shenzhen china. We offer from 2-18 layers volume production and 2-24 layers prototype. We could offer you many kinds of special high technology of multi-layers circuits such as backplane pcb, metal base pcb, hi-tg heavy copper foil pcb, flat winding pcb, high frequency pcb, mixed dielectric base pcb, flex and flex-rigid pcb. Testing procedures for quality warranty: We perform multiple quality assuring procedures before shipping our products to customers. - 100% visual inspection - metal thickness test - copper thickness test - via hole test - 100% flying probe - 100% e test fixture - impedance control test - solder ability detection - digital metallogenic microscope - 100% aoi (automated optical inspection) Quotation requirement: -gerber file would be the best to get an accurate quotation. If no, following specifications are needed for pcb quotation. 1. Quantity 2. Base material 3. Layer count 4. Board thickness 5. Copper thickness 6. Surface treatment 7. Color of solder mask 8 other special requirements Pcb assembly files requests: 1. Gerber files of the bare pcb 2. Bom (bill of material) for assembly To shorten the lead time, please kindly advise us if there is any acceptable components substitution. 3. Testing guide & test fixtures if necessary 4. Programming files & programming tool if necessary 5. Schematic if necessary Teson tech has being done strongly to meet special needs of customer. We will do our best to give you our professional engineering supports, professional quality control in manufacturing and competitive prices. We hope that we could have a chance to have good and long term business with you! Vacuum package
Number of layers: 2 Surface finish: ENIG Base material: F4B Min. hole diameter: 0.8mm Outer Layer W: 6mil Outer layer S: 6mil Thickness: 1.0mm Advantages Of 2 Layer F4B PCB Own lamination process to convenient production for Multilayer PCB and shorten the lead time. Jiangxi facility is environmental-friendly approved by the government . Famous raw materials brand, Kingboard, Shengyi, ITEQ, Taiyo, Guangxin. Highly automated production line with AIO Optical Scanning, Electroplating Automatic Line, High-speed flying probe test machines and inkjet printer. Engineers with more than 15 years of experience Customers located in more than 20 countries, the common choice of 500 high-end companies. High staff stability, low mobility. UL/ISO9001/SGS/IATF16949/ROHS/ISO1400 certificated. Sales office in Shenzhen and own 12,000sqm factory in Jiangxi. Establish an e-commerce system to reduce transaction costs and increase market response speed. As the cheapest pcb manufacturer, we will do our best to meet all the needs of customers.
Special futures Thickness: 1.6mm Application: projector or projecting apparatus Minimum trace size: 0.1mm Minimum drill: 0.15mm With blind and buried holes Layers: 1 to 28 Board finished thicknesses: 0.2 to 7.0mm Materials: FR-4, CEM-3, high Tg, halogen-free FR4 and Rogers,F4B Maximum finished board size: 580 x 900mm Minimum hole size: 4mil (0.1mm) Minimum trace width/space: 3.5/3.5mil Surface finishes/treatments: HASL, lead-free HASL, immersion gold, gold plating, immersion silver, immersion tin and OSP Copper thicknesses: 0.5 to 6oz Solder mask colors: green, yellow, black, white, red and blue Copper thickness in hole: >18um Inner packaging: plastic bag (vacuum packing) Outline tolerance: ¡À0.13mm Hole size tolerance: (PTH) ¡À0.076 and (NPTH) ¡À0.05mm With UL and TS16949:2002 marks Special requirements: buried and blind vias, impedance control, via plug, BGA soldering and gold finger Profiling: punching, routing, V-cut and beveling OEM services to all sorts of printed circuit board assembly as well as electronic encased products are provided. Inner:vacuum packaging. Outer:carton.
2 layers PCB Fr4 1.6mm 1oz Gold immersion Green mask White ledgend Used for lighting manufacturing.
high quality Thin 0.5mm PCB 2 Layer with TG 150, Double-sided blue solder mask Electronic PCB Place of Origin:Guangdong, China (Mainland) Model Number:58214 Base Material:FR-4 150 Copper Thickness:1oz Board Thickness:0.5mm Min. Hole Size:0.2mm Surface Finishing:ENIG Special: 2-layer with 0.5mm board thickness, black soldermask Routing/Punching:CNC-Test: 100% Inspection standard: IPC-A-600H/IPC-6012B, Class 2/3 Outgoing reports: final inspection, e-test, solder ability test, micro section and so on Cost effective and high-quality vertical PCB manufacturing Small as well as large volume production with flexibility China professional thin thickness rigid PCB manufacturer betty,kuang a
Fr-4 board, 1.6mm board thickness and 1oz copper thickness, Hasl-lf surface finishing, green solder mask and white legend, Ul and rohs certified, Fast prototype and mass production for pcb and pcb assembly as per buyers' requirements, Component sourcing, pcb reverse engineering and pic decoding available, High quality and good price. Pcb capability: Max layer count for rigid pcb: 1-12, Pcb board thickness: 14mil -175mil, Drill to metal: 7mil, Hole size: 6mil, Inner layer registration: 3mil, Line width & space inner/outer: 3mil/3mil (minimum), Aspect ratio: min solder mask dam: 2.5mil, Controlled impedance: +/- 8,161;,235;, Max internal copper wt: 3 oz, Advanced technologies: blind/buried via, hdi micro via, Surface treatment: enig, osp, immersion silver/tin, lead free hasl, Materials: fr4, high tg epoxy, halogen free, Certificates: rohs, iso14001 and ul, Price: quite competitive especially for orders in huge quantities, Products application: computer, communication, test & control system, medical equipment etc. Lead time: 5-20 days (depends on qty, production status etc. ) Delivery mode: ups, dhl, fedex, tnt, standard flight & vessel, pls kindly feel free contact with us if you have any question about pcb&pcba. 200mm*160mm*140mm¡ê,172; 0.1kg per pcs
Function and usage: Industrial grade lithium carbonate is mainly used in steel continuous casting mold slag; in the electrolytic aluminum industry, adding industrial grade lithium carbonate can reduce the volatility, viscosity and melting point of the electrolyte, and improve the conductivity of the electrolyte, thereby reducing heat loss and improving Current efficiency, energy saving and prolonging the service life of electrolytic cells; used to prepare refrigerant lithium bromide; used to prepare lithium chloride as a raw material for metal lithium electrolysis; used to prepare high-purity grade lithium carbonate and pharmaceutical grade lithium carbonate; Used in glass, ceramics, enamel and enamel, etc. Storage and use: Avoid contact with eyes, skin and clothes; keep away from strong acids and strong oxidizing substances, and store in a ventilated, dry and airtight manner. Packing: paper-plastic composite bag lined with 2 layers of PE bag, 25kg/bag or as customer's request. Shipping: The product is not classified as a hazardous chemical and is suitable for shipping by sea, rail, air and road. Pay attention to moisture-proof and acid-proof during transportation.
Number of layers: 2 size: 184.2*158.9mm Surface finish: LF-HASL Base material: Rogers 4350B Min. hole diameter: 0.4mm Minimum Line Width: 0.227mm Minimum Line Space: 0.127mm Thickness: 0.7mm Advantages Of 2 Layer Rogers LF-HASL PCB Own lamination process to convenient production for Multilayer PCB and shorten the lead time. Jiangxi facility is environmental-friendly approved by the government . Famous raw materials brand, Kingboard, Shengyi, ITEQ, Taiyo, Guangxin. Highly automated production line with AIO Optical Scanning, Electroplating Automatic Line, High-speed flying probe test machines and inkjet printer. Engineers with more than 15 years of experience The management level is highly educated, 30% have professional titles and more than ten years of work experience. High staff stability, low mobility. UL/ISO9001/SGS/IATF16949/ROHS/ISO1400 certificated. Sales office in Shenzhen and own 12,000sqm factory in Jiangxi. Establish an e-commerce system to reduce transaction costs and increase market response speed. As one of rogers pcb manufacturers, we can provide kinds of related products for sale. And the rogers pcb price is reasonable, anything you need, please leave us a message. With the help of a technology development team for professional PCB manufacturing, HUIHE Circuits has mastered advanced technology in the PCB industry, we own reliable production equipments, test machines and a full functional P&C lab. Our products include 2-28 layers, high TG, heavy copper, high frequency, mixed-dielectric laminate and buried & blind via board If you are looking for a reliable pcb builder, please choose us, and we will be your best partner.
Huihe high frequency PCB is a trusted name in RF PCB manufacturing, delivering high-performance solutions for demanding high-frequency applications. Discover our extensive capabilities and reliable RF PCBs tailored to ensure efficient signal transmission and precision in electronic designs. Number of layers: 2 size: 96.45*87.73mm Surface finish: ENIG Base material: Rogers 4350B Min. hole diameter: 0.5mm Minimum Line Widthï¼?/mm Minimum Line Spaceï¼?0.139mm Thickness: 0.35mm What Are The Considerations Of High Frequency RF PCB? There are several key considerations when designing a high-frequency RF circuit board: Material Selection: The materials used for the PCB itself and the surface finish can significantly impact performance. Hereâ??s what to consider: Dielectric constant: This determines the speed of the signal traveling through the board. For high frequencies, a low and stable dielectric constant is crucial. Loss tangent: This indicates how much signal strength is lost due to the material. Lower loss tangent materials are better for high-frequency applications. Copper roughness: Rougher copper surfaces can introduce signal loss. Opt for a smoother copper finish. Solder mask: The material and thickness of the solder mask can also affect signal integrity. Choose a low-loss material for the solder mask. Signal Integrity: This refers to maintaining the strength and quality of the signal as it travels through the PCB. Hereâ??s how to optimize it: Impedance matching: This ensures minimal signal reflection and loss. Impedance is controlled by trace width, spacing, and the dielectric constant of the material. Trace routing: Minimize the length of signal traces and avoid sharp bends. Aim for smooth, continuous traces. Vias: Vias introduce capacitance and inductance, which can disrupt signal flow. Minimize the number of vias and use smaller vias when possible. EMI control: High-frequency signals can radiate electromagnetic interference (EMI) which can disrupt other devices. To mitigate EMI: Grounding: A good grounding strategy is essential. Use a continuous ground plane and connect all components to the ground plane properly. Shielding: In some cases, shielding enclosures may be necessary to contain EMI. Manufacturing and Testing: High-frequency PCBs often require special manufacturing considerations, such as controlled impedance etching and via plating. Additionally, proper testing equipment is necessary to ensure the board meets performance specifications. By carefully considering these factors, you can design high-frequency RF PCBs that function effectively and meet your performance requirements.
Number of layers: 2 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 8.5/3.5mil Thickness: 0.8mm Min. hole diameter: 0.2mm Special process: half hole Advantages Of 2 Layer ENIG Half Hole PCB Product Own lamination process to convenient production for Multilayer PCB and shorten the lead time. Jiangxi facility is environmental-friendly approved by the government . Famous raw materials brand, Kingboard, Shengyi, ITEQ, Taiyo, Guangxin. Highly automated production line with AIO Optical Scanning, Electroplating Automatic Line, High-speed flying probe test machines and inkjet printer. Engineers with more than 15 years of experience Customers located in more than 20 countries, the common choice of 500 high-end companies. Perfect quality inspection system Professional R&D team can make all kinds of special boards. Sales office in Shenzhen and own 12,000sqm factory in Jiangxi. Establish an e-commerce system to reduce transaction costs and increase market response speed. Now the price of two sided pcb is reasonable, if you want to buy 2 sided pcb, please contact us. As a circuit board maker, we will do our best to meet all the needs of customers.
We are a Manufacturer & Supplier Specializing in Double Side PCB, Multi-Layer PCB, PTFE PCB, Ceramic PCB, Rogers PCB, Aluminum PCB with more than 10 years. Meanwhile, we provide PCBA ( Assembly) and ODM, OEM service. We are specializes in a full SMT and through hole PCBA assembly, obtaining components, building prototype quantities, and testing. You can know us a little by below information. 1. Model Number: PCB 2. Board Thickness: 17um-175um 3. Min. Hole Size : 0.075mm 4. Min. Line Width : 0.075mm 5. Min. Line Spacing : 0.075mm 6. Surface Finishing Lead free HASL, HASL,Immersion gold, Immersion tin, Immersion Silver. 7. Layer: 4-22 Layers solder mask: Black, green, yellow,red,bule 8. Material: High Tg FR4, FR-4,Alu PCB etc Board 9. Thickness: 0.4-6.0 mm 10.Treatment : Lead Free HASL, ENIG, etc. RoHS,UL,ISO9001:2000 , ISO14001:1996 11.Copper thickness: 17-175um rigid PCB .
Product Name : Galvanized Angle Surface : BA/2B/NO.1/NO.3/NO.4/8K/HL/2D/1D Edge : Plain Mill Standard : ASTM DIN GB JIS EN AISI * Use of galvanized angle steel: widely used in power tower, communication tower, curtain wall materials, shelf construction, railway, highway protection, street lamp pole, marine components, building steel structure components, substation ancillary facilities, light industry, etc. Hot dip galvanized angle steel is also called hot-dip galvanized angle steel or hot-dip galvanized angle steel. The cold galvanizing coating mainly ensures full contact between zinc powder and steel through electrochemical principle, and generates electrode potential difference to prevent corrosion. It is used to immerse the derusted angle steel in the molten zinc at about 500 â?? to make the angle steel surface adhere to the zinc layer, so as to prevent corrosion. It is suitable for various strong acid, alkali fog and other strong corrosion environments. Warehouse Storage * Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project Packing and shipping * Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service. * During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period Application field * The company adheres to the corporate spirit of never being satisfied and striving to surpass, and continuously creates new brilliance with the new economic concept of continuous innovation. Reward guests and friends from all over the world with satisfactory service. Our company is willing to cooperate closely with friends from all walks of life at home and abroad, and work together to create a better tomorrow.
Galvanizing is an economical and effective rust prevention method commonly used, and about half of the world's zinc production is used in this process. The galvanized steel plate is coated with a layer of metal zinc to prevent corrosion on the surface of the steel plate and extend its service life. This type of coated steel plate is called galvanized steel plate. Material SGCC,SGCH,G550,DX51D,DX52D,DX53D,DX54D,DX554D,S280GD,S350GD Standard JIS-CGCC, JIS-G3312, ASTM-A635, EN-1043, EN-1042,etc. Surface treatment 1. Galvanized 2. PVC,Black and color painting 3. Transparent oil,anti-rust oil 4. According to clients requirement Thickness 0.12-6.00mm,or customer's requirement Width 650-930mm,600-1500mmaccording to customer's requirement Length 1000mm-12000mm or customized Tolerance Thickness: +/-0.02mm, Width:+/-2mm Processing service Bending, Welding, Decoiling, Cutting, Punching Payment term 30% payment by T/T as deposit, the balance 70% before dispatch or received the copy of the BL or 70%LC Packing Standard Seaworthy Packing Spangle Regular spangle,minimal spangle, zero spangle,big spangle Price term CIF CFR FOB EX-WORK Delivery term 7-15 workdays MOQ 10 Tons Product Application 1. Fence, greenhouse, door pipe,greenhouse 2. Low pressure liquid, water, gas, oil, line pipe 3. For both indoor and outdoor the building construction 4. Widely used in scaffolding construction which is much cheaper and convenient Warehouse Storage Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project
* I-beam, also known as steel beam (English name universal Beam), is a long steel with the section of the I-shaped. I-section steel is divided into hot rolIed I-beam and lightweight I-beam The characteristics of galvanized I steel: 1. Strong corrosion resistance: the thickness of hot-dip galvanized layer can reach more than 300 m; 2. Good plasticity and toughness: no deformation in cold bending; 3. High strength: it can be used as the load-bearing framework of ceiling enclosure plate. 4. Good fire resistance: high melting point (1000 C), strong fire resistance; 5. Long service life : 100 years. 6. Flexible and fast installation: short construction period. 7. The color is bright and durable, without surface decoration Standard DIN GB JIS BA AISI ASTM EN GOST etc. Shape : I -Beam Materials : Galvanized steel Size : As customer request Packing : By bundles with steel strips or as customer request Application : Mechanical&manufacture,Steel structure,Shipbuilding,Bridging,Automobile chassis, etc. Warehouse Storage * Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project. Packing and shipping * Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service. * During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period
Number of layers: 2 Surface finish: OSP Base material: FR4 Outer Layer W/S: 6/4mil Thickness: 1.0mm Min. hole diameter: 0.25mm Special process: impedance control+half hole Advantages Of 2 Layer OSP Impedance Control Half Hole PCB Own lamination process to convenient production for Multilayer PCB and shorten the lead time. Jiangxi facility is environmental-friendly approved by the government . Famous raw materials brand, Kingboard, Shengyi, ITEQ, Taiyo, Guangxin. Highly automated production line with AIO Optical Scanning, Electroplating Automatic Line, High-speed flying probe test machines and inkjet printer. Engineers with more than 15 years of experience Customers located in more than 20 countries, the common choice of 500 high-end companies. Perfect quality inspection system Professional R&D team can make all kinds of special boards. Quick turn, prototype, medium or large batches can be produced to meet the needs of different customers. Quick response to quotes. Now the price of osp pcb finish is reasonable, anything you need, please contact us. As a pcb manufacturing company, we can provide kinds of pcb boards for sale, if you are interested, please leave us a message.
Number of layers: 2 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 7/4mil Thickness: 1.0mm Min. hole diameter: 0.3mm Special process: impedance control+half hole Advantages Of 2 Layer ENIG Impedance Control Half Hole Printed Circuit Board Own lamination process to convenient production for Multilayer PCB and shorten the lead time. Jiangxi facility is environmental-friendly approved by the government . Famous raw materials brand, Kingboard, Shengyi, ITEQ, Taiyo, Guangxin. Highly automated production line with AIO Optical Scanning, Electroplating Automatic Line, High-speed flying probe test machines and inkjet printer. Engineers with more than 15 years of experience Customers located in more than 20 countries, the common choice of 500 high-end companies. Perfect quality inspection system Professional R&D team can make all kinds of special boards. Sales office in Shenzhen and own 12,000sqm factory in Jiangxi. Establish an e-commerce system to reduce transaction costs and increase market response speed. As a 2 layer pcb manufacturer, we can provide kinds of double layer pcb china for sale, and the 2 layer pcb price is reasonable, if you have needs, please contact us. As a pcb builder, we will do our best to meet all the needs of customers.
