Plastic pipette fills the fragile defect of glass tube and ends the history of glass tubes and rubber plug for the transfer of high-risk contagiousness liquids. The interior of the pipette is smooth and reduces the damage to the tissue structure and cell in the liquid. It can transfer the liquid sample safely, rapidly and quantitatively. It is resistant to low temperature and can be sterilized at high temperature.
SUNBOW has a glass fiber tube SB-SGS-40 series, which is very suitable for high-voltage insulation of drive motors of new energy vehicles. The test was conducted at the Mercedes-Benz headquarters. After 30 days of continuous operation of the fiberglass tube on the lead of the drive motor, the fiberglass tube did not crack. Among domestic brands, only SUNBOW did it and eliminated all competitors. Among the insulating sleeves for new energy vehicle applications, most manufacturers are currently competing in the project of driving motors, but SUNBOW has developed the SB-SGS-40 series first, and its advantage is that SUNBOW insists on using it. Alkali-free and sodium-free glass fiber yarn and a certain brand of silica gel imported from Germany. After the tube is formed by the special weaving process of SUNBOW, the glass fiber tube yarn is tight and moderate, and the surface is smooth, which lays the foundation for the subsequent coating process. The toughness of German silicone raw materials is more than twice that of domestic silicone. With the help of a proprietary formula, the coated glass fiber tube has a brighter color, and its wear resistance and tear resistance are more than twice higher than those of the same industry. The temperature resistance reaches 260 degrees, and the temperature resistance of domestic counterparts is 200 degrees. The SB-SGS-40 series are mostly used in new energy vehicles. Therefore, there are not many domestic manufacturers with its production capacity. Many customers who find SUNBOW value whether the manufacturer has large-volume production capacity. SUNBOW has two factories in Shenzhen and Dongguan, with an output of 8.4 million meters per month. This is in a far leading position among domestic counterparts. At the Berlin exhibition in Germany in May 2019, the technical director of Mercedes-Benz headquarters directly tested the wear resistance and tear resistance of the SUNBOW fiberglass tube on the spot and found that the SUNBOW fiberglass tube exceeded many domestic and foreign manufacturers. At this time, the customer has already seen the capabilities and strengths of SUNBOW, and used SUNBOW fiberglass tubes in a recent new energy vehicle drive motor project.
Epoxy Glass Fiber Winding Tube 360 EPCF52 Description: This product adopts fiber glass yarn that is impregnated with insulation jelly made of epoxy resin and other resins by certain proportion, and then it is rolled in wet method, and dried and finally consolidated by baking. Its heat resistance level is up to Class H, and it also has excellent electrical and mechanical properties, chemical resistance (SF6), low dielectrical loss, no deformation or delamination. It can be used as main insulator on H grade dry-type transformer, load tap changer, electricâ??reactor, lightning arrestor, SF6 inductor, etc. Technical Data Standardï¼?GB/T 5132.1-2009 IEC61212-1:2006 No. Properties Unit Value 360/EPCF52 1 Density g/m1.85-2.00 2 Vertical Bending Strength (normal) MPa 400 3 Axial Compressive Strength MPa â?¥150 4 Parallel Breakdown Voltage (90 â?? of transformer oil) Kv â?¥40 5 Vertical Electrical Strength (90 â?? of transformer oil) 1mm Kv/mm â?¥11.6 6 Surface Voltage Resistance after Wetting kv â?¥12 7 Insulating Electrical Resistance after Wetting Ω â?¥1.0*10^9 8 Dielectric Loss Factor (50Hz) - â?¤0.05 9 Water Absorption ï¼? â?¤1 10 Partial Discharge PC â?¤5 11 Temperature Index - 180
Difference between three high efficiency solar vacuum tube (effective tubes, high cold tube, high temperature special efficiency tube)and ordinary tube: Absorption of heat membrane layer is difference between these two kind of tubes. (Absorption of heat membrane layer is the key part of vacuum tubes.) Absorption of heat membrane layer of three high efficiency solar vacuum tube is interference membrane, common tube is gradient membrane. The difference is mainly for interference membrane and the gradient membrane distinction. 1. Fundamental distinction: membrane layer structure is different, the principle of the absorption of sun's rays result in differently. gradient membrane, for multilayer, its absorbing layer is generally 9 layers. It to the sun's rays are layered absorption, and its absorb the light performance gradually become tall. Because the gradient structure, launch with increasing temperature rise than work, that temperature in 300 to 500 C than when launch greatly increased. The aluminum ions and absorbing layer in high temperature condition, lively nature greatly enhance the, and develop a drift. This happened in the internal structure of membrane layer caused confusion, coating began to aging. In the long run, the high temperature condition, membrane layer can fall off, thereby affecting the vacuum tube heat efficiency and life integrating. Interference membrane, its absorbing layer altogether 2 layer, among two layer membranes, because the metal content between the different and interfere ratio effect, make absorption ratio increase, launch ratio decrease. Plus effect of reduce emission from minus reverse layer, thus achieve more higher absorptance and reducing the role of launch ,greatly improved collection thermal efficiency. 2.Features: Absorptance of three high efficiency solar vacuum tube increased by 12%, and launch reduced by 30 to 40 percent, the super absorbing, heat loss less, warming faster. Efficient tube, the super absorbing, thermal efficiency is high, warming faster, in the same light conditions, can create more and higher temperature water than common tubes ; high cold tube, copper ions for the launch of aluminum ion mantua, so low 0.2 thermal loss rarely, in high cold environment can still work normally. hot water turn out as usual under- 30 C. high temperature special efficiency tube, because the membrane layer stainless steel ion high temperature resistant, fight air drying. Membrane layer under the condition of the 400 C, not attenuation, not aging, discoloration. In the same light conditions, ordinary tube heat absorption is lower than three high efficiency solar vacuum tube, can't even meet requirements that wash bath; In lower temperature, heat loss is bigger, collection hot effect is reduced, affect the normal use; Especially in the empty sun over 270 C, membrane layer began to aging, fall off, absorption rate drastically reduce, life shortens greatly. 3.Technology: high temperature special effects tube, high cold tube, efficient tube used respectively to three target, double target, single target magnetron sputtering craft; Ordinary tube typically use the single target magnetron sputtering technology. 4, appearance: A, Mouth of tube, here membrane layer above 800 C high temperature condition sealing off part is inevitable. As high temperature special effects tube has high temperature resistant, only 1 cm long without membrane layer in mouth of tube, while others without membrane layer for without high temperature resistant, tube membrane layer falls off the length is about 2.5 cm B, Inner tube color: with macroscopic observation, high-temperature tubes and high cold tube for internal color is kermesinus (for membrane layers bottom is copper); the bottom And efficient tube and ordinary tube are white (for membrane layer bottom is aluminum). Anyhow, interference membrane is the new breakthrough basis of gradient on membrane technology ,it is the great innovation in coating technology progress and become current global, interference coating of the most advanced coating technology. But also to the vacuum coating technology bring epoch-making change. Especially with the high temperature effects made interference membrane, can also be used for cooling tube, dry, seawater desalination, opened up the update for vacuum tubes wider application fields. Solar collector tube introduction Feature: 1 Quality warranty :15 years Quickly thermal collecting efficiency. It works fine under cold weather and area. Three kind of solar collector: Common :evacuated collector tubes. High-efficiency: Three-target evacuated collector tubes: blue and black-golden High-efficiency: Three-target evacuated collector tubes: purple-golden (purple and golden) Solar evacuated collector tubes technical data: Dimension: 47: 58 Material of tubes: 3.3 high borosilicate: 3.3 high borosilicate Glass expansion ratio: 3.3¡¾0.1X10-6 k-1: 3.3¡¾0.1X10-6 k-1 Outer diameter of tubes: 47¡¾0.7: 58¡¾0.7 Inner diameter of tubes: 37¡¾0.7: 48¡¾0.7 Thickness of glass: 1.6¡¾0.15: 1.6¡¾0.15 Transmittance: 0.89: 0.89 Selective coating: SS-CU-AL-N/AL: SS-CU-AL-N/AL Adsorptivity: 0.86(AM1.5): 0.86(AM1.5) Emissivity: 0.080(80¡¾5): 0.080(80¡¾5) Vacuum degree: 5.0 X 10-3Pa: 5.0 X 10-3Pa Collecting performance under sunshine: 190m2/kw: 190m2/kw Hailstone resistance: 25mm: 25mm Start up fast and collect solar energy fully Unique super pure copper surface,allowing reflection and minimal heat loss. High level vacuum ensure operation under cold weather. Long time warranty to 15 years. 10pcs/Carton. Applications: superior heat resisting products and crafts. 15-20KG/Carton.
Glass Tube
DTech Products supply a wide variety of sight glasses from tubular to bulls eye sight glasses to sanitary sight glasses for applications such as the viewing of distillate in alcohol production. We also provide Lined PTFE Sight Glass for corrosive pipes & fittings. Our Teflon Lined Full View Sight Glass provides a quick, reliable and economical way to verify the flow of liquids through industrial process pipe lines.
It has colorless or light-blue surface and light-purple section. Besides common property, it can filter ultraviolet radiation of 190-320nm to prevent harm to bodies. It can be used in most kinds of environmental lighting products.
Zhongshan Haomen Lighting Techonology Co.,Ltd is the specialist of lighting decorations, including high-grade crystal lamps, bound glass lamps, wrough iron lamps, marble stone lamps and all-copper dewaxed lamps and so on. We have 18000m2 morden production base and more than 8000m2 of exhibition hall, with certification of CCC, CE, UL, VDE, etc.,
1.Purity 99.996% 2.Resistance 1100 degree, 1000 long time work 3.Low OH 4.No bubble Diameter50mm ID46mm Long1240mm
Quartz glasss tube/Infrared milky quartz tube with as below advantage, and be the best choice for infrared heating element. 1. With Infrared radiation, and the transmissivity of infrared is arrived to 70-75% 2. With out surface coating and infectant, is a excellent chemic products 3. With high heat stability and high temperature resistant. 4. Can be make by various shaped, and ametabolic long using. 5. Heating temperature selective, as well unchangeable radiation ability in long term. 6. Structure reasonable 7. Make used of convenient. OD10mm*1mm*2500mm OD10mm*1mm*2250mm OD23mm*20mm*2250mm.
The clear and colored 3.3 borosilicate glass tube we supply is produced though advanced electric melting glass furnace, laser surface control machine, sealed feed channel, virola tube. We apply international advanced technic and fabricate skills to produce borosilicate glass tube with different specifications.
We are the biggest manufacture of colored borosilicate glass rod&tubing in China ,we are also the exclusive manufacture of colored borosilicate glass rod&tubing since 2002. Main composition: a) SiO2: 80 ¦0.5% b) B2O3: 13 ¦0.2% c) Al2O3: 2.4 ¦0.2% d) Na2O (+K2O): 4.3 ¦0.2% Chemical properties: a) Coefficient of mean linear thermal expansion : (20/300 ¦C):3.3¦0.1 (10-6K-1) b) Transformation temperature: 525¦15¦C c) Working point: 1,260 ¦20¦C d) Softening point: 820 ¦10¦C e) Density at 20¦C: 2.23g/cm¦ f) Hydrolytic resistance at 98¦C: ISO719-HGB1 g) Hydrolytic resistance at 121¦C: ISO720-HGA1 h) Acid resistance class: ISO1776-1 i) Alkali resistance class: ISO695-A2 We now can produce 11 colors: red, opaque black, opaque white, pink, purple, green, yellow, amber, dark blue, light blue and transparent black. Test shows they contain no heavy metal elements. The size we can do : OD: 3.5ù300mm W.T:0.8ù12mm, length 3000mm. OEM is welcomed.
This is clear fused quartz glass tube available as continuous machine drawn and automatic controlled tubing. This glass had the typical characteriastics of high purity, good spectral transmission, well controlled dimension and lower oh and so on. It serves as the first choice of heat resistant material for halogen lamps, mercury lamps, metal halide lamps and other quartz lamps. This glass can be supplied in the range of 3-260mm outside diameter, 0.5-8.0mm wall thickness and 10-3000mm length. Exhaust tubes with good cpk are suitable for high-speed streamline production. And further processing of trim cutting, fire polishing, bending and pinching and etc. Can be done according to the requirement of customers. Oh-content can be controled within 20ppm\15ppm\10ppm\5ppm\2ppm according to the requirement of customers.
A quartz tube is one kind of basal material. It's main component is silicon dioxide.It has series of excellent physical and chemical capabilities, such as heat resisting, corrision resisting, good heat stability and so on. Because of having above excellent physical and chemical properties, they are widely used in dlectric lamphouse, semiconductor, light communications, martial industry, metallurgy, electric power and so on. Spec can be controlled by customers' demand.
With the adoption of distinctive technique, our opaque quartz glass tube has its typical characteristics of good visual aspects and stable physical &chemical properties. It serves as material of infrared heating for heaters, micro-wave oven, electrical baking oven, car paint baking, sterilization container and other consumptive and industrial infrared application. Further processing of trim cutting, bowing, fire-polishing can be done according to the demanding of the customers Standard export packing avoid breaking.
Glass tube rotameters Thermacol packing.
Flowtech instrument services provides a range of glass tube/acrylic body rotameters. These rotameters are used for the measurement of fluid/gas flow rate through pipelines. Following are some of the technical features of these rotameterthe rotameter has linear scale accuracy with 10:1 rangeability. It has face height 500 mm and two tone powder coating and low cost with fastest delivery.The rotameter operates on variable cross section area of the glass tube [metering tube]. Various constructional features of this rotameter are: the device has a unique design to withstand tough quality conditions. This metering tube is shielded from all sides with clear front and rear visibility. Gland packing construction provides tension free tube installation and perfect stoppage of leaking. The tube and float are easily interchangeable. Various options are available for construction and materials of construction of wetted parts for a wide range of applications. Flowtech instruments services offers these from 15 nb to 80 nb and flange between 2.5 lph to 2000 lph of water and 0.1 to 200 nm3/hr of air. Thermacol packing.
Quartz glass tube Density 20¦ kgm3(103)2.2 Coefficient of expansion 25300¦ ¦1(106)0.56 Fp softening point¦1710 P annealing Sp strain point(¦)1140 E youngs modulus(pa)7.3105 Range of odg Od Wt Siding Out of rounds+ Bow/1220mm 6mm2.0%10%12%2.0%2.5mm 6.0015.00mm1.25%8%10%1.5%2.5mm 15.0020.00mm1.25%10%15%1.5%2.5mm 20.0025.00mm1.25%10%15%1.5%2.5mm 25.0030.00mm1.35%12%15%1.5%2.5mm 30.0080.00mm1.5%14%15%2.0%2.5mm
Glass Tube Rotameter is a Variable Area Flow Meter. A rotameter consists of a tapered tube, typically made of glass, with a 'float' made of SS or PTFE. The differential pressure across the annulus area is constant. The float moves through the tapered tube up and down with respect to fluid flow. The vertical position of the float as indicated by scale is the measure of the instantaneous flow rate. Specifications : Material of Construction : CS / SS 304 / 316 / PTFE Float : SS 316 / SS 304 / PTFE Tube : Glass Borosilicate Packing : PTFE / VITON / Silicon / Neoprene Enclosure : SS Buffed / MS Powder Coated / FRP Line Size from 15 NB to 80NB Ranges between 2.0 LPH to 2SQ00LPH ace-To-Face Distance : 500mm Accuracy : +/- 2% of Full Scale Measuring Span : 1:10 Scale : Acrylic / Aluminum / SS Various Features : Heavy Duty Design with Maximum Visibility Two Tone Powder Coated Excellent Finish No Threads in Body, Avoids Corrosion Easy to Maintain and Replace Suitable for on Line Installation Single Piece (Joint-less) PTFE/ PFA/ PP cladded end connections
Glass Tube Rotameter Manufacturer & Exporter of Glass Tube Rotameter. Our product range also comprises of Acrylic Body Rotameter and Bypass Rotameter. Our organization holds expertise in manufacturing and supplying premium quality Glass Tube Rota Meter. We carry out the manufacturing process of these Rota Meter by making use of the supreme quality steel under the supervision of professional. This equipment is made of qualitative range of boro silicate glass using the latest technology. Features : Flow Star Glass Tube Rota meters are unique design for industrial usage high precision tapered borosilicate glass tubes are utilized for best performances. Special design features eliminate stresses on glass tube even under industrial handling conditions. Glass Tube are field replicate without disturbing end connection
