Submersible water pumps , deep well pump, centrifugal pump, stainless steel pump Model: 200QJ63-28/2 Flow: 63m3/h Head: 28m Power: 7.5kw Material:Cast iron/stainless steel Impeller material:Cast Iron/stainless steel Pressure:Low Pressure Warranty:12 Months Color:Blue Place of Origin: ,China (Mainland) Deep well submersible water pump Overview: deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc. http://www.dragonpump.com/products/qj-deep-well-submersible-pump/ Deep well submersible water pump structure&model meaning 1. Submersible electric pump is composed of five parts: water pump, submersible motor, water line, waterproof cable and control switch. Water pump belongs to single suction multistage vertical centrifugal pump. 2. Submersible motor adopts water-filled wet structure, internal chamber was filled with water for cooling the motor and lubricating the bearing. In the operation, due to the changes of temperature, the pressure of the filled water in the internal chamber also changes, it can be automatically regulated by pressure-regulating unit in the lower part of motor. 3. For preventing the sand getting into the motor, the sand-preventing unit including sand and skeleton oil-sealed was installed in the upper part of motor, the whole motor was sealed tightly. 4. There are water injection hole and exhaust hole in the upper part of the motor and discharge hole in the lower part. 5. There are thrust bearing and thrust collar, mainly for sustaining remnant axial force of pump and the empty weight of motor's rotor. http://www.dragonpump.com/products/qj-deep-well-submersible-pump/ Deep well submersible water pump spare parts &features: Deep well submersible water pump motor and pump assembled into one. Deep well submersible water pump has simple structure, easy to use and maintenance. Electric motor is three-phase asynchronous motor. http://www.dragonpump.com/products/qj-deep-well-submersible-pump/
Hydroman Electric Submersible Slurry Pump in Stainless Steel for Acid Mine also known as stainless steel submersible slurry pump are designed to provide the mining and industrial processing markets with unparalleled resistance to corrosion and abrasion, polluted water in the sea or the rivers also requires these stainless steel submersible pumps. Hydroman submersible stainless steel slurry pump is an extremely durable, top-discharge slurry submersible pump with a mechanical agitator and wide clearances. This submersible slurry pump uses the pumped liquid to cool the motor. The pumping components of the submersible sea water sand pump, notably the agitator, impeller and wear plate are constructed of stainless steel, meaning the submersible sand slurry pump is designed to be a solid workhorse in any condition. Hydroman Electric Submersible Slurry Pump in Stainless Steel for Acid Mine Features Best structure design of submersible sand pump, has a dry motor, IP68, double mechanical seals, equipped with an auto-cut protection, pump casting, outer cover is stainless steel, and acid-resistant silicon carbide seals. The stainless series submersible agitator slurry pump is suitable for all light acid, corrosive and/or sea water application fluid in pH values between 4 to 10pH. For strong acidity and alkalinity applications, please use the specified chemical vertical submerged pump. Investment Casting Precision casting with the use of an advanced stainless investment casting method that produces the highest quality with a smooth surface finish. Viton O-rings are used throughout the stainless steel submersible slurry agitator pump to give better pump life in corrosive acid and aggressive media. Austenitic Stainless Steel SS316 water application of light acid-base.
Hydroman Electric Submersible Sand Pump Description: Electric Submersible Mud Pump with Soft Stater Control Panel can handle waste water as well waste water with robust and reliable solids,there is a stirring impeller at the bottom of the submersible electric sludge pump body, which can stir the deposited sludge to form a turbulent flow and realize high-concentration transportation. compared with the general horizontal sludge pump or vertical slurry sludge pump, the submersible sludge pump has a compact structure and a small footprint.There are no problems such as cavitation damage and irrigation and water diversion. Especially the latter point brings great convenience to the operator. The vibration noise is small, the motor temperature rise is low, and there is no pollution to the environment. Three heat control switches are embedded in the stator of submersuble sewage slurry pump.
Hydroman Electric Submersible Mud Pump Description: Hydroman Electric Submersible Mud Pump for Mining Reclamation is a versatile solids handing pump designed for Mining and Dredging applications where the water is contaminated with suspended solids such as coal fines, sand, and mud. Used to remove water, soft and abrasive material, sludges, and slurries from Industrial, Municipal, Agricultural, and Government Lagoons, Ponds, Lakes, Canals, and flooded and flood threatened areas as well as to irrigate farms and ranches. The submersible electric motor is protected by a superior double mechanical seal and probes to detect water ingress into the mechanical sea oil chamber. The wear parts is fitted with an integrated agitator, come breaker; this will ensure that only particles of the correct size enter the chamber, plus creating adequate flow turbulence to keep suspended solids flowing.
Electric Automatic Water Pumps,BOOSTER PUMPS
CE Pumps Constructional Features 'CE' pumps are dimensionally conforming to ISO:2858 and DIN 24256. These pumps are horizontal, radially split, single stage, centrifugal end suction volute with top centerline delivery. The pump feet are integrally cast with the Delivery casing. The Impeller is of an enclosed type. The Bearing housing is fitted with a support foot. The pump shaft is supported by grease lubricated antifriction ball bearings as a standard scope of supply. Models : Following models are available in 'CE' Pump series. Unit-30 --------- Unit-40 --------- Unit-50 32/20 ----------- 40/26 ----------- 25/32 40/13 ----------- 65/16 40/20 50/13 Application Of CE Pumps * Water supply * Fire Fighting * Sprinkling * Irrigation * Air conditioning * Brine * Light chemicals * Drinking water * Industrial water * Cooling water * Swimming pool water * Condensate * Hot water * Clear juice.
Water pump Power: 0.75kw, 1hp
Qb60 1/2 HP Peripheral water Pump Electric for House Product feature: Model : QB60 QB70 QB80 Power: 0.5HP 0.75HP 1HP Voltage:110V,127V,220V,230V,240V Frequency 50HZ/60HZ Max.flow. 70 L/MIN Max.Head. 50 M Pump body: cast iron Impeller: brass Motor: closed, externally ventilated IP44,Insulation class F Duty: continuously M.Seal: stainless steel Graphite - ceramic or carbon-ceramic
Spray seals for electric centrifugal pumps in sbr 60 sh/a rubber.
Flow: 10m3/h Head: 40m Power: 2.2kw Material: cast iron Medium: clean water Outlet dia: 32mm Diameter: 175mm Speed: 2850r/min Voltage: 380v Phase: 3 phase/50hz Color: blue Qj submersible pumps parameters: Flow range10~500m3/h, lift scope within 5~405m; Caliber scope 32~203mm, temperature range-15~80° c. Products overview: Qj series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation. Product use conditions: Qj submersible pumps use conditions 1. 380 v bias voltage does not exceed + -5% and 50 hz frequency, and the deviation is not more than + -1% of the three-phase power supply. 2. Electrical cavity must be filled with water. 3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m. 4. Electrical from the bottom of the bottom of the well shall be not less than 3 m. 5. The water temperature no higher than 20 ° c, qjr-temperature hot water pump up to 80 ° c. 6. Water and sand content (by mass) of not more than 0.01%. 7. Water ph 6.5-8.5. 8. The hydrogen sulfide in water content is not more than 1.5 mg / l. Application : Deep well water Farm irrigation Sprinkling irrigation Urban and rural industry Mine supply and drainage.
ELECTRIC VACUUM PUMP FOR EV M-710 Application of this EV MINI VACUUM PUMP Our mini - VACCUM PUMPS are made with introduced technology international advanced techonology, distinguishing fetures of small size, light weight,low noise,pollution-free maintenance-free, good durability and so on,mainly used in pharmaceutical, automobile brake booster negative pressure source,gas analysis sampling, instrumentation,gas-liquid separator etc. A complately realization of the maintenance-free, and the pump without oil,no pollution transmission medium,can replace the similar foreign products totally.
Item name: dp-850 Outlet:8" Head: 15~ 30m Output: 50 hp Capacity: 480 m3/h (40% solid pumping) Solid passing: 60 mm Weight: 970 kg
Hydroman Electric Submersible Sand Pump Description: Electric Submersible Mud Pump with Soft Stater Control Panel can handle waste water as well waste water with robust and reliable solids,there is a stirring impeller at the bottom of the submersible electric sludge pump body, which can stir the deposited sludge to form a turbulent flow and realize high-concentration transportation. compared with the general horizontal sludge pump or vertical slurry sludge pump, the submersible sludge pump has a compact structure and a small footprint.There are no problems such as cavitation damage and irrigation and water diversion. Especially the latter point brings great convenience to the operator. The vibration noise is small, the motor temperature rise is low, and there is no pollution to the environment. Three heat control switches are embedded in the stator of submersuble sewage slurry pump.
Voltage:220V Power:550W Flowrate:60L/min Suction length:5m height:10m Inlet diameter:25mm Outlet diameter:25mm
MPA4001 Flow 8 to 14l/min Pressure 200 to 300Kpa Size 63*40*92mm Rated life >800h Weight 298g Tube 7mm DC 6V 12V 24V Power
Flow: 10m3/h Head: 180m Power: 13kw Material: cast iron Medium: clean water Outlet dia: 32mm Diameter: 175mm Speed: 2850r/min Voltage: 380V Phase: 3 phase/50Hz Color: Blue QJ Submersible pumps Parameters: Flow range10~500m3/h, Lift scope within 5~405m; Caliber scope 32~203mm, Temperature range-15~80° C. Products Overview: QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation. Product use conditions: QJ Submersible pumps use conditions 1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply. 2. Electrical cavity must be filled with water. 3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m. 4. Electrical from the bottom of the bottom of the well shall be not less than 3 m. 5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C. 6. Water and sand content (by mass) of not more than 0.01%. 7. Water PH 6.5-8.5. 8. The hydrogen sulfide in water content is not more than 1.5 mg / L. Application : deep well water farm irrigation sprinkling irrigation urban and rural industry mine supply and drainage. Shenlong pump Ltd is located at the beautiful shore of the Yellow River and at the foot of the mountains of Mangshan, ZhengZhou City in the heart of Henan province. The company was created in the 1980s, And after the company's combined relentless efforts has become one of the largest modern enterprises in Henan that combines Research and Development (R&D), Prototype Design, Product testing, Advanced industrial production, and operational excellence. Shenlong pump Ltd is a design manufacture export professional company. Our Enterprise is Ministry of Agriculture. We are production and sales pumps around the world. The manufacture have strong technical force, with all kinds of machine tools, planer, drill press, etc. and The manufacture's total land area of over 660000 Square meters and with in excess of 300 equipment sets. Employing 860 staff members; amongst them over 40 senior technical experts. The allocation of B-level exceeds the national standard of computer Pump testing centers.
Application: This product is suitable voltage level is less than 3kv/6kv of electric submersible pump until and the power cable connected to the supporting power supply. Operating characteristics: Cables rated voltage:1.8/3kv---3.6/6kv Cable minimum ambient temperature of not less than-50celsius degree. Cable normal operating temperature between 90--250celsius degree Cable minimum bending radius of not less than 30 times the thickness of cable. The structure of cable includes conductor, insulation, Kapton, lead sheath layer and armor. The production range of cable :the cross-sectional area is 10--20mm2 and the core number is 3. Type and designation:
This DC transfer pump is for fueling diesel, kerosene, not for gasoline. It used to fill or empty engines, tanks and all kinds of machinery, tractor and farm equipments. Product details: Pumping Fuel: Diesel and kerosene Power: Electric Application: Transfer fuel to vehicles or construction fields' engineering work or maritime navigation.Technical Parameters: Flow Rate : (20-40)L/min Rated Voltage : DC12V or DC24V Pressure: 0.16-0.18Mpa; 1.6-1.8bar; 23-26psi Suction Lift : 3-5m Head Lift: 5-10m In-out: In BSPT3/4", Out BSPT3/4" Voltage: 12V/24V Power: 245W Flowrate: 50L/min height: 10m Inlet diameter: 25mm Outlet diameter: 25m
Technica data: P/N: Y200-EN Power supply: 220V/380V Power: 1.5KW Output pressure:
1.Oil pump capacity: 4 liters Fuel tank 2.Voltage: 220V Motor output power: 35W Current: 0.35A 3.Pressure: 2.5MPa (conventional 15-20kg pressure can be) 4.Spit volume: 130-200CCMIN rated speed (min): 2800 50 / 60Hz 5.Use of oil viscosity range: 15-1000 c. st (thin oil) 6.The oil pump is suitable for resistance type / pressure relief system. 7.Simple and direct access to direct access 220V power supply (liquid level feedback / pressure feedback port) 8.Oil pump with a low oil level alarm, when the oil level is insufficient to advance the alarm, the timely addition of lubricants comes with pressure detection function, when the pressure is insufficient Will be issued when the alarm 9.Pump set time adjustment range, working time 1999 seconds, downtime 1-999 minutes. The interval can be interchangeable in minutes and seconds. Pump, working hours 1-999 seconds and downtime 1-999 minutes can be adjusted According to mechanical equipment, with low noise, high efficiency, high pressure stability, simple operation, etc., for, machine tools, textile machines, elevators, Woodworking machinery gears, rail lubrication, chain, etc. lubrication, with the use of centralized lubrication accessories, so as to achieve no manual operation, concave when the quantitative automatic lubrication effect.
