Item Test Condition Test Method Value Unit Density ISO 1183 0.950~0.955 g/cm MFR 190 C/2.16kg ISO 1133 1.7~2.5 g/10min Tensile strength at yield ISO 527-2 24 MPa Elongation at break ISO 527-2 >600 %
Item Test Condition Test Method Value Unit Density ISO 1183 0.950~0.955 g/cm MFR 190 C/2.16kg ISO 1133 1.7~2.5 g/10min Tensile strength at yield ISO 527-2 24 MPa Elongation at break ISO 527-2 >600 %
Item Test Condition Test Method Value Unit Density ISO 1183 0.950~0.955 g/cm MFR 190 C/2.16kg ISO 1133 1.7~2.5 g/10min Tensile strength at yield ISO 527-2 24 MPa Elongation at break ISO 527-2 >600 %
Item Test Condition Test Method Value Unit MFR 190 C/2.16kg ASTM D-1238 20 g/10min Density --- ASTM D-792 0.954 g/cm3 Tensile strength at yiled --- ASTM D-638 28 MPa Elongation at break --- ASTM D-638 250 % Impact tensile strength --- ASTM D-1822 42 kJ/m2 ESCR ASTM D-1693 3 --- VACIT --- ASTM D-1525 127 C
Item Test Condition Test Method Value Unit MFR 190C/2.16kg ASTM D-1238 20 g/10min Density --- ASTM D-792 0.954 g/cm3 Tensile strength at yiled --- ASTM D-638 28 MPa Elongation at break --- ASTM D-638 250 % Impact tensile strength --- ASTM D-1822 42 kJ/m2 ESCR ASTM D-1693 3 --- VACIT --- ASTM D-1525 127 C
Key performance: 1. No jam in photocopy machine 2. No double feed 3. Stay flat after copying 4. Leave no dust in the copy-machine 5. Nice appearance-white and clean 6. Nice touch-smooth and bulky 7. No see through-print both sides 8. Used for: Photocopy Machines, Laser Printers, Ink-jet Printers, Fax Machines Gramage: 80gsm, 75gsm, 70gsm Quality: Imported 100% Natural Wood Pulp Brightness = 102-104%,Natural White Capability: High Speed Copying100ppm, Laser Capable,Inkjet Capable, Fax Capable. Thickness: 103-110 um Surface roughness TS ml/min: 75-175 Surface roughness BS ml/min: 100-200 Bending stiffness MD: >110 Mn Bending stiffness CD: >50 Mn CIE whiteness: 148-152 or 152-165 Cobb Test: 27-33 g/m2 27-33 Two-sided usage gives the paper sheet high opacity. Smooth paper surface makes sharp printing and copying. Moist protected wrapper
Key performance: 1. No jam in photocopy machine 2. No double feed 3. Stay flat after copying 4. Leave no dust in the copy-machine 5. Nice appearance-white and clean 6. Nice touch-smooth and bulky 7. No see through-print both sides 8. Used for: Photocopy Machines, Laser Printers, Ink-jet Printers, Fax Machines Gramage: 80gsm, 75gsm, 70gsm Quality: Imported 100% Natural Wood Pulp Brightness = 102-104%,Natural White Capability: High Speed Copying100ppm, Laser Capable,Inkjet Capable, Fax Capable. Thickness: 103-110 um Surface roughness TS ml/min: 75-175 Surface roughness BS ml/min: 100-200 Bending stiffness MD: >110 Mn Bending stiffness CD: >50 Mn CIE whiteness: 148-152 or 152-165 Cobb Test: 27-33 g/m2 27-33 Two-sided usage gives the paper sheet high opacity. Smooth paper surface makes sharp printing and copying. Moist protected wrapper
Gramage: 80gsm, 75gsm, 70gsm Quality: Imported 100% Natural Wood Pulp Brightness = 102-104%,Natural White Capability: High Speed Copying100ppm, Laser Capable,Inkjet Capable, Fax Capable. Thickness: 103-110 um Surface roughness TS ml/min: 75-175 Surface roughness BS ml/min: 100-200 Bending stiffness MD: >110 Mn Bending stiffness CD: >50 Mn CIE whiteness: 148-152 or 152-165 Cobb Test: 27-33 g/m2 27-33 Two-sided usage gives the paper sheet high opacity. Smooth paper surface makes sharp printing and copying. Moist protected wrapper Size: International standard A4: 210 x 297mm A3: 420x 297mm 8.5 x 11-inch (216 x 279mm) 8.5 x 14-inch (216 x 330mm) Key Performance: No jam in photocopy machine No double feed Stay flat after copying Leave no dust in the copy-machine Nice appearance-white and clean Nice touch-smooth and bulky No see through-print both sides Been developed for : Photocopy Macchines, Laser Printers, Ink-jet Printers, Fax Machines
Weather strips of automotive Devulcanization and extruding machine with stainless 80 wire mesh and remove smell of Sulfur Packing is 1,250kg/pallet Hardness A type 63~65 /Tensile Strength 75~80kgf/sq cm / Elongation rate 200% / Specific Gravity 1.29
Item Test condition Test Method Value Unit Density ISO 1183 0.944-0.955 g/cm3 MFR 190 C/2.16kg ISO 1133 0.03-0.07 g/10min Tensile strength at yield ISO 527-2 22 MPa Elongation at break ISO 527-2 >350 % ESCR F50,50 C,100% ASTM D-1693A 1000 h VICAT ASTM D-1525 126 C
Item Test condition Test Method Value Unit Density ISO 1183 0.944-0.955 g/cm3 MFR 190 C/2.16kg ISO 1133 0.03-0.07 g/10min Tensile strength at yield ISO 527-2 22 MPa Elongation at break ISO 527-2 >350 % ESCR F50,50 C,100% ASTM D-1693A 1000 h VICAT ASTM D-1525 126 C
Item Test condition Test Method Value Unit Density ISO 1183 0.944-0.955 g/cm3 MFR 190 C/2.16kg ISO 1133 0.03-0.07 g/10min Tensile strength at yield ISO 527-2 22 MPa Elongation at break ISO 527-2 >350 % ESCR F50,50 C,100% ASTM D-1693A 1000 h VICAT ASTM D-1525 126 C For extrusion packaging film, rope, woven bags, fishing nets, water pipes; injection of low-end commodity and housing, non-bearing load components, plastic box, turnover box; extrusion blow molding containers, hollow products, bottles.
Item Test condition Test Method Value Unit Density ISO 1183 0.944-0.955 g/cm3 MFR 190 C/2.16kg ISO 1133 0.03-0.07 g/10min Tensile strength at yield ISO 527-2 22 MPa Elongation at break ISO 527-2 >350 % ESCR F50,50 C,100% ASTM D-1693A 1000 h VICAT ASTM D-1525 126 C For extrusion packaging film, rope, woven bags, fishing nets, water pipes; injection of low-end commodity and housing, non-bearing load components, plastic box, turnover box; extrusion blow molding containers, hollow products, bottles.
Tests Value Unit Melt Flow Rate (MFR) 20 g/10min Density 0.924 g/cm3 Tensile Strength MD12 Mpa TD 10 Elongation at Yield 13 % Elongation at Break 200 % Dark Drop Impact 105 g Brittle Temperature(F 50) -70 C Vicat Softening Point 90 C
Tests Value Unit Melt Flow Rate (MFR) 20 g/10min Density 0.924 g/cm3 Tensile Strength MD12 Mpa TD 10 Elongation at Yield 13 % Elongation at Break 200 % Dark Drop Impact 105 g Brittle Temperature(F 50) -70 C Vicat Softening Point 90 C
The UV laser marking machine is developed by using a 355nm UV laser. This machine uses a third-order intracavity frequency doubling technology. Compared with infrared lasers, the 355nm UV laser has a very small spot, and the marking effect is directly interrupted by a short-wavelength laser. The molecular chain greatly reduces the mechanical deformation of the material. Thermal deformation (cold light), because it is mainly used for ultra-fine marking and engraving. It is especially suitable for applications such as marking, micro-hole drilling of food and pharmaceutical packaging materials, high-speed dicing of glass materials, and complex pattern cutting of silicon wafers.
Features: Full Facepiece Respirator Large lens for wide field of view Lightweight, balanced design Silicone face seal for greater comfort and durability Characteristics Double exhalation valve; Low respiratory resistance; The transmission device design make the information transfer more clear Used Oil, Machine maintenance, Construction, Gas ,Electric power, Shipbuilding, Transport, Mine, Chemical plant, but not for radioactive high toxic particulate matter.
Raw melting material - aluminum scraps, cans, engine waste etc. Output capacity - 5-30 tons/h, customized Automation - Full automatic/ half automatic (based on output requirement and investment budget Ingot type - ADC12 (7.5kg/ 10kg / customized) 1. After cleaning the oil and grease of waste aluminum, manually put it into the furnace with a forklift; 2. Ignition for melting furnace .Heat up to 680C, and input appropriate proportion of alloy elements. Heat up to 800C, melt and stir evenly, then fetch samples to the spectrometer for testing. Every lot of production need to do testing . 3. Put A tool that attracts iron into the furnace by forklift, to suck away the iron in the aluminum water. 4. Put the slag agent into Alu liquid to remove the slag. After slag removed , put the slags into Aluminum ash separation machine , and let the aluminum water and ash separate. The proportion of slag agent and aluminum liquid is 1:500 5.Open the drain valve and the aluminum water flows automatically to the ingot production line After the ingot casting is completed, the ingot stacking robot will stack the ingots, which means the production is completed.
Door and door quick installation system. DISCOVER THE INTER-JOIN DIFFERENCE SKIRTINGS ARCHITRAVES DOOR UNITS WINDOW REVEALS THE COMPLETE FINISHING SYSTEM We set-out to improve the quality and efficiencies of the home and apartment finishing process Delivering a higher quality finished product More cost effective than traditional methods Significantly faster, simpler and safer installation process Easy installation of pre-finished and pre-assembled door units Achieve an eco-friendly product made from recycled materials Built-in design tolerances to mitigate the necessity for accuracy Reduction in on-site labour - finishing, painting and tiling Elimination of finishing defects 100% termite resistant finishing material 100% Waterproof We achieved it! The Inter-Join finishing system eliminates all of the quality & labour issues associated with the traditional finishing process Eliminates: Skilled labour associated with hanging doors Eliminates: Skilled labour associated with butt hinges recessed into doors and jambs Eliminates: Labour associated with fitting locks Eliminates: Mitre cuts required for skirting and architraves Eliminates: Gap filling sealant around skirting and architraves Eliminates: Cut-in painting around skirting/walls and architraves Eliminates: Intricate tile cutting of floor tiles and addition of sealant around door jambs Eliminates: Trimming door jamb & window reveals Resulting in increased productivity & cost savings THE INTER-JOIN DIFFERENCE DELIVERING A HIGHER QUALITY FINISHED PRODUCT SIGNIFICANTLY FASTER, SIMPLER AND SAFER INSTALLATION PROCESS MORE COST EFFECTIVE THAN TRADITIONAL METHODS INSTALLATION READY, PRE-FINISHED, AND PRE-ASSEMBLED DOOR UNITS ECO-FRIENDLY PRODUCT MADE FROM RECYCLED MATERIALS BUILT-IN DESIGN TOLERANCES THAT MITIGATE THE NECESSITY FOR ACCURACY REDUCTION IN ON-SITE LABOUR - FINISHING, PAINTING AND TILING ELIMINATION OF FINISHING DEFECTS MATERIALS ARE 100% TERMITE RESISTANT MATERIALS ARE WATERPROOF DOORS, SKIRTING AND ARCHITRAVES ARE FILM WRAPPED FOR PROTECTION All Door Units are pre-finished, assembled and ready for immediate installation Residential door manufactured from completely waterproof composite (WPC & Wooden) material Residential doors are available in varying styles and designs Commercial doors manufactured to precision from high quality Aluminium Composite Panels, entirely processed on our patented, computer operated door machine Residential and commercial hardware available
EcoTexTM-SL20 - PVA FREE ONE-SHOT PRODUCT DESCRIPTION New generation eco-friendly one-shot product for a high-speed shuttleless loom. It is mainly used for 6 to 203 cotton yarns sizing. This product is entirely biodegradable and ecological. Products are made from grafted starch, anionic polymers, and synthetic fatty matters. It contains a maximum of 13% moisture and an optimized viscosity level. Easily disperse in cold water with little swelling property due to high binding property. Having high penetration power and plasticizing power for heavy construction fabrics weaving. SPECIFICATIONS 1.Appearance - Off white powder 2.pH value of 5% solution - 6 to 8 3.Solubility - Partially soluble in cold water 4.Viscosity of size mix - 5 to 6 sec (SITRA -6mm cup) 5.Total Moisture - Max 13% 6.Bulk density - 0.5 to 0.6 g/ml 7.Total ash - Max4% COOKING METHOD 1. Fill the required quantity of water in the cooker. 2. Gradually add EcoTexTM-SL20 and mix for 2 min. 3. Add other ingredients and mix for 2 min. 4. Close the pressure cooker lid. 5. Open the steam value and cook to @ 120�? �ºC or 35psi. 6. Retain in the cooker for 15 to 20 minutes. 7. Then transfer the size mix to storage. PROPERTIES 1. Moisture regain: The formation of thin flexible film absorbs water molecules from atmospheric air that maintains the required moisture content of the sized yarn. This property improves the weaving efficiency by reducing the warp stops. 2. Film property: The very thin strong film gives the inter fibre penetration that improves yarn tensile strength. Optimum elongation and flexible property significantly reduce warp break by overcoming the applied tension during weaving. 3. Abrasion resistance: A strong film withstands the mechanical friction between yarn to yarn and yarn to machine parts like reed, dropper pin, heald wire, and weft picking element. DE-SIZING Easily de-sizable product with hot alkali treatment. STORAGE Keep away from direct sunlight and store in a cool, dry, and well-ventilated place. STABILITY Stable for one year from the date of manufacture. PACKING Available in 50Kg net weight PP bags with moisture-proof liner inside.
