Vid23 is a precise stepping motor of patent design. It is specially designed with transparent pointer shaft, pointer lumination intensity is superior to tranditional way. It also bring cost reduction in saving number of leds. Vid23 with a gear reduction ratio of 1/180. Its mainly used in dashboard instrumentation or other digital indicator equipments, to transfer digital signals directly and accurately to analog display output. Vid23 is driven by 2 sequent logic pulse signals. It can be driven in 5v ~ 10v providing shaft stepping angle resolution 1/12. The pointer can move with a speed more than 400hz. 1000pcs/ctn, gross weight 10.5kg, 430*314*478mm
Hybrid Stepping Motor(110BYGH) Features: Model: 110BYGH99-001; 110BYGH150-001; 110BYGH202-001 Step angel ( íp) : 1.8 Motor Length L(mm): 99/150/201 Rate Voltage (V): 4.95~5.44 Rate Current (A): 5.5~8 Phase Resistance ( ª+ ): 0.67~0.9 Phase Inductance (mH): 12~15 Holding Torque (N.m): 11.2~28 Lead Wire (NO.): 4 Rotor Inertia (g. c¬O): 5.5~16.2 Detent Torque (kg.cm) 5~11.7 Motor Weight (kg): 5~11.7. 110mm,5-11.7kg,28n-m.
Modelú¦85BYGH450A-001ú+85BYGH450A-002 ú+85BYGH450B-002ú+85BYGH450B-004ú+85BYGH450B-00885BYGH450C-001ú+85BYGH450C-012ú+85BYGH450D-002ú+85BYGH450D-007 Step angel ( íp ): 1.8 Motor Length L(mm): 75~151 Rate Voltage(V): 1.9~7.8 Rate Current (A): 2~6 Phase Resistance ( ª+ ): 0.43~3.9 Phase Inductance (mH): 2.5~22 Holding Torque (N.m): 2.1~9.3 Lead Wire (NO.): 4/8 Rotor Inertia (kg. c¬O): 1.4~3.6 Motor Weight (kg): 2.3~5. 85mm,9.3n-m.
Stepper motor drive -Bipolar Motor Drive -Microprocessor based Design -Operating Voltage up to 80V DC -Programmable Motor current up to 8A -Up to 64 Microsteps - Selectable through DIP Switch -Microstepping for Smooth Operation Carton Box
Byj series stepper motor Model 35BYJ46 Rated voltage 12VDC Number of Pole 4 Speed Variation Ratio 1/85.25 Stride Angle 7.5fp /85.25 DC resistance 130ohmf+7%(25k) Idle In-traction Frequency >500Hz Idle Out-traction Frequency >800Hz In-traction Torque >78.4mN.m(120Hz) Self-positioning Tor >39.2mN.m insulated resistance >10ohm(500V) insulated electricity power 600VAC/1mA/1s Insulation grade A Rise in Temperature
Product model: 17HS3401S-PGXXX Stepper motor length: 34 mm Shaft size: "D" shaft 16x8mm Motor lead: plug Including connection: 1M double dot line Gear reducer ratio Gearbox model: 3.71-1 5.18-1 14-1 19-1 27-1 51-1 Decrease: 3.71 5.18 14 19 27 51 Transmission length: 29 29 37 37 37 45
S series 2-quadrant bldc speed driver ¡ôspecification: S series is simple compact speed driver with fixed parameters and pi Close-loop. The reference can be 0-5v analog voltage or 0~100%pwm. Also it can be 0~3khz frequency by adding a f-v unit on pcb. Motor's r and easy use. control functions of f/r enable, brake, speed reference and output functions of speed pulse (pg), alarm three kinds of reference inputs:analog voltage, pwm, frequency suitable for 3-phase bldc motors with hall sensors use of industrial grade chips
Stepping motor driver cw250 Technical data: 1. Input voltage: 20 ½ 40vac or 24~60vdc 2. Phase current: adjustable from 1.5a to 5a 3. Running mode: 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128, 1/256 steps 1/5, 1/10, 1/25, 1/40, 1/50, 1/100, 1/200 steps 4. Protection mode: overheat, overpressure and overcurrent protection 5. Overall dimension: 150mmß98mmß45mm 6.Weight:
Features: Modelú¦ 17hm201ú+ 17hm206ú+ 17hm208ú+ 17hm602ú+ 17hm604ú+ 17hm607ú+ 17hm805ú+ 17hm809ú+ 17hm810 Step angel ( íp): 0.9 Motor length l(mm): 34~48 Rate voltage (v): 2.4~11.2 Rate current (a): 0.4~2.4 Phase resistance ( ª+ ): 1~28 Phase inductance (mh): 1.8~30 Holding torque (g.Cm): 1400~4800 Lead wire (no.): 4/6 Rotor inertia (g. C¬o): 34~68 Detent torque (g.Cm): 180~260 Motor weight (kg): 0.2~0.34
Hybrid stepping motor
Hybrid stepping motor Item specifications Step angle 1.2 or 0.6 Step angle accuracy 5% (full step, no load) Resistance accuracy 10% Inductance accuracy 20% Temperature rise 80c max.(rated current, 2 phase on) Ambient temperature -20c~+50c Insulation resistance 100m ¬+ min. , 500vdc Dielectric strength 500vac for one minute Shaft radial play 0.02max. (450 g-load) Shaft axial play 0.08max. (450 g-load) Max. Radial force 220n ( 20mm from the flange ) Max. Axial force 60n Insulation class b
Step Angle 1.8fp or 0.9fp Step Angle Accuracy f+5% (full step, no load) Resistance Accuracy f+10% Inductance Accuracy f+20% Temperature Rise 80fpC Max.(rated current,2 phase on) Ambient Temperature -20fpC~+50fpC Insulation Resistance 100M ¬+ Min. ,500VDC Dielectric Strength 500VAC for one minute Shaft Radial Play 0.02Max. (450 g-load) Shaft Axial Play 0.08Max. (450 g-load) Max. radial force 220N ( 20mm from the flange ) Max. axial force 60N Insulation Class B
Item Specifications Step Angle 0.72íp or 0.36íp Step Angle Accuracy í+5% (full step, no load) Resistance Accuracy í+10% Inductance Accuracy í+20% Temperature Rise 80ípC Max.(rated current,2 phase on) Ambient Temperature -20ípC~+50ípC Insulation Resistance 100M ª+ Min. ,500VDC Dielectric Strength 500VAC for one minute Shaft Radial Play 0.02Max. (450 g-load) Shaft Axial Play 0.08Max. (450 g-load) Max. radial force 220N ( 20mm from the flange ) Max. axial force 60N Insulation Class B
Hybrid stepping motor Item specifications Step angle 1.2or 0.6 Step angle accuracy 5% (full step, no load) Resistance accuracy 10% Inductance accuracy 20% Temperature rise 80c max.(rated current, 2 phase on) Ambient temperature -20c~+50c Insulation resistance 100m + min. , 500vdc Dielectric strength 500vac for one minute Shaft radial play 0.02max. (450 g-load) Shaft axial play 0.08max. (450 g-load) Max. Radial force 220n ( 20mm from the flange ) Max. Axial force 60n Insulation class b
NEMA 34 CAN Closeloop 10N.m Integrated Stepper Motor Our drivers and controllers can be installed on the rear cover of NEMA17/NEMA23, It will simplify the design of integrated stepper motor. User can install the encoder to achieve open-loop control. The process of assembly is simple and flexible. It just require few connecting lines, and more space is saved. It is easy to distribute control and remote monitoring for users. As shown in the following figure, PMC006B4 controller is installed on the rear cover of NEMA17. The noise and vibration under low speed is slight. Stepper motor + PMC007C6SE driving controller + encoder Compact structure, saving complicated wiring, saving space High-precision, close-loop control with encoder Accurate positioning, recording step position, without losing step Easy to install, easy to distributed control, support a variety of control metho
Part No. 20BYGH408Single Shaft Frame Size:  NEMA8 Step Angle:  1.8 degree Voltage:  4.32VDC Current: 0.8A/phase Resistance: 5.4Ohm/phase Inductance:  1.5mH/phase Holding torque:  30Kg-cm Rotor inertia: 3.6  g-cm2 Detent torque: 5� kg-cm Number of wire leads:  4 Weight:  0.2KG Length:40mm Front  shaft diameter: 4mm Front shaft length: 20mm round shaft This model is for Single shaft, with 4mm motor shaft, 20mm front shaft length, round shaft! More Order Quantites, more  discount!
Part No.:  20BYGH206  Single Shaft Frame Size: NEMA8 Step Angle:  1.8 degree Voltage:  1.92VDC Current:  0.6A/phase Resistance:  3.2 Ohm/phase Inductance:  0.9  mH/phase Holding torque 14Kg-cm Rotor inertia  9  g-cm2 Detent torque: 2 kg-cm Number of wire leads  4 Weight:  0.05KG Length:28mm Front  shaft  diameter: 4mm (1/4'') Front shaft length:  20mm round shaft This model is for Single shaft, with 4mm motor shaft, 20mm front shaft length, round shaft!
Part No.  39BYG003Single Shaft Frame Size NEMA16 Step Angle:  1.8 degree Voltage:  12VDC Current:  0.48A/phase Resistance:  25Ohm/phase Inductance  22mH/phase Holding torque:  100Kg-cm Rotor inertia:� � � 11g-cm2 Detent torque:� � � 5kg-cm Number of wire leads:� 4 Weight:� � � 0.12KG Length:20mm Front� shaft� diameter: 5mm Front shaft length:� � 24mm round shaft This model is for Single shaft, with 5mm motor shaft, 24mm front shaft length, round shaft! More Order Quantites, more  discount!
Part No.: 28BYGH102Single Shaft Frame Size:NEMA11 Step Angle: 1.8 degree Voltage: 3.8VDC Current: 0.67A/phase Resistance: 5.6Ohm/phase Inductance: 3.4mH/phase Holding torque: 60Kg-cm Rotor inertia: 9g-cm2 Detent torque:� 4kg-cm Number of wire leads: 4 Weight: 0.11KG Length:32mm Front shaft diameter: 5mm Front shaft length: 20mm round shaft This model is for Single shaft, with 5mm motor shaft, 20mm front shaft length, round shaft More Order Quantites, more discount
Part No.:  20BYGH202  Single Shaft Frame Size:  NEMA8 Step Angle:  1.8 degree Voltage:  4.6VDC Current:  0.2 /phase Resistance:  23 Ohm/phase Inductance:  8.2  mH/phase Holding torque:  14Kg-cm Rotor inertia:   9 g-cm2 Detent torque:    2 kg-cm Number of wire leads: 4 Weight:   0.05KG Length:   28mm Front shaft diameter: 4mm (1/4'') Front shaft length:  20mm round shaft This model is for Single shaft, with 4mm motor shaft, 20mm front shaft length, round shaft! More Order Quantites, more discount!
