Dc Current Transducer Bj Dpa(T) Suppliers and Manufacturers

Function & Feature 1. QPPX electrical transducer measures a wide range of electrical parameters and generates analog or digital output signals suitable for interfacing with instrumentation and control systems. Total four channel output, with panel key or PC control programmable, user can free to set 4 different data from max 26 electrical parameter for sampling and analog signal output. 2. Have three channel digital inputs and optional RS485-Modbus communication functionality. Can monitor the galvanically isolated DI signal and programmed the transducer with customized SCADA software. Any of the measured parameters can be read out via the optional RS485-Modbus connection. 3. QPPX also can be used to configure the connection to the measured circuit for single-phase, three-phase three-wire, three-phase four-wire, balanced or unbalanced load. Can be connected to a variety of measuring and control devices and systems, such as analogue meters, PLC, computers, data loggers, digital instruments and telemetry systems. 4. Snap on to DIN rail 35 x 7.5 mm complies with DIN-EN 50022 BS 5584 Specifications Inputs: Nominal input 1 or 5 Amp C.T. connected 110V, 230V, 240V, 400V, 415V ac +/-20% Power consumption

Function & Feature 1. Have microcontroller technology as the core, using the latest algorithms, to achieve precise measurement. 2. Voltage transducer converts an ac voltage input into a load independent output signal. 3. Excellent temperature characteristic and good working stability. 4. The output signal is based on the a root mean square(rms) measurement of the input signal and hence the transducer can be used with distorted waveforms. 5. The unit conforms to IEC 60688. In a addition it meets the insulation requirements of IEC 60255-5, clauses 5, 6 and 8 as well as the high frequency disturbance test of IEC 60255-22 for Class III test voltage. Specifications Inputs: System voltages 100V,220V, 380V, 450V Absorbed power 0.5VA Frequency range 50Hz, 60Hz Output: Standard nominal outputs 4~20mA, 0-5V, (others on request) 0-20mA, 5-10V 0-10V Ripple

EQUINAS TFO 60u High Quality Un-Inhibited Transformer Oil EQUINAS TFO 60u is a high-quality un-inhibited insulating oil with very good dielectric properties and oxidation stability intended for transformers, switchgears, and other electrical equipment. Transformer Oil is a series of products blended using highly refined mineral oil and a selected antioxidant. It is designed for insulating and cooling transformers, oil-immersed switchgear and other electrical insulating applications. Does not contain harmful polychlorinated biphenyls (PCBs). Applications: Used as an insulating oil in transformers, switchgear, inductors, condensers, transducers, and similar equipment, also at low temperature in outdoor use It insulates current-carrying parts from each other and from ground, carries away heat, prevents glow discharges, extinguishes electric arcs in switchgear, and impregnates insulating materials Features and Benefits: Excellent insulating properties High dielectric strength (1) Low power factor Resists oxidation and deposit formation Excellent low-temperature properties Compatible with materials used in transformers Does not contain any PCBs Meets or exceeds the IEC 60296 Packages size: Available in drums and flexibags Health and Safety: Based on available information, this product is not expected to produce adverse effects on health when used for applications referred to above and the recommendations provided in the Safety Data Sheet (SDS) are followed. The SDS is available upon request through our sales contact office. This product should not be used for purpose other than the applications referred to above. If disposing of used product, take care to protect the environment, follow the local rules and regulations of your local Authority.

EQUINAS TFO 60i High Quality Inhibited Transformer Oil EQUINAS TFO 60i is a high-quality inhibited insulating oil with very good dielectric properties and oxidation stability intended for transformers, switchgears, and other electrical equipment. Transformer Oil is a series of products blended using highly refined mineral oil and a selected antioxidant. It is designed for insulating and cooling transformers, oil-immersed switchgear and other electrical insulating applications. Does not contain harmful polychlorinated biphenyls (PCBs). Applications: Used as an insulating oil in transformers, switchgear, inductors, condensers, transducers, and similar equipment, also at low temperature in outdoor use It insulates current-carrying parts from each other and from ground, carries away heat, prevents glow discharges, extinguishes electric arcs in switchgear, and impregnates insulating materials Features and Benefits: Excellent insulating properties High dielectric strength (1) Low power factor Resists oxidation and deposit formation Excellent low-temperature properties Compatible with materials used in transformers Does not contain any PCBs Meets or exceeds the IEC 60296 Packages size: Available in drums and flexibags Health and Safety: Based on available information, this product is not expected to produce adverse effects on health when used for applications referred to above and the recommendations provided in the Safety Data Sheet (SDS) are followed. The SDS is available upon request through our sales contact office. This product should not be used for purpose other than the applications referred to above. If disposing of used product, take care to protect the environment, follow the local rules and regulations of your local Authority.

Nominal Current(RMS):50/100/200/300/400/600A Vout@Ipn:+_4.000V Measuring Range:0~+_900A Supply Voltage DC:+_12-15 Accurancy@Ipn,+25degree Celsius:less than +_1.0% Mounting(mm):10.5*20.5

Nominal Current(RMS):10/25/50/75A Vout@Ipn:2.500+_0.625V Measuring Range:0~+_150A Supply Voltage DC:+5V Accurancy@Ipn,+25degree Celsius:less than +_0.5% Mounting(mm):8.2 in diameter

Attribute: 1.Input: DC 0~1mA...0~5A; 2.Output: DC(0)4-20mA 3.Accuracy : 0.5% 4.Input Impedance (R): Riï¼?0.05V/Ix (Ix is the current be measured) 5.Linear Range:0-120% of nominal input 6.Responding Time: 150ms 7.Over Load Capacity: 10 times of nominal input, for 5 seconds; 8.Maximum Load: 6V 9.Static current: 17mA 10.Auxiliary Power:+12Vdc +24Vdc 11.Isolation Voltage: â?¥2500Vdc, for 1 minute 12.Output Ripple: ï¼?10mV 13. Drifting by Temperature: 350Ã?10-6/ 14. Ambient Temperature: -10ï½?+50 15. Mounting : DIN Rail 35mm Mounting

Attribute: Rated input current 1mA, 5mA, 20mAâ?¦5A DC Output signals 0-5V, 0-10V DC Accuracy 0.2% Input Impedance (R) approximate zero Responding Time 350ms Linear measuring range 0 - 1.2 times of rated input current Over Load Capacity 30 times of rated input current, 5s Frequency range 25Hzï½?5kHz Output impedance 6V Static current 10mA Power supply +12V, +24V DC Isolation Voltage(Input/Output) â?¥2500Vdc, for 1 minute Output Ripple ï¼?6mV Thermal drift 200ppm/°C Ambient Temperature -25ï½?+50 Mounting DIN Rail 35mm Mounting or screw mounting Material of shell ABS (According to UL94V-0) Protection of shell IP20 Shell type without aperture MTBF >50000h Weight 90g

Attribute: Rated input current AC 30A, 50A, 100A, 150A, 200A, 250A, 300A, 350A, 400A AC Output signals 4-20mA DC Accuracy 0.5% Input Impedance (R) approximate zero Responding Time 300ms Linear measuring range 0 - 1.2 times of rated input current Over Load Capacity 30 times of rated input current, 5s Frequency range 25Hzï½?5kHz Output impedance 6V Static current 3.3mA(0mA-20mA) 6.8mA(4mA-20mA) Power supply +12V/+24V DC Isolation Voltage(Input/Output) â?¥2500Vdc, for 1 minute Output Ripple ï¼?6mV Thermal drift 350ppm/°C Ambient Temperature -10ï½?+50 Mounting DIN Rail 35mm Mounting or screw mounting Material of shell ABS (According to UL94V-0) Protection of shell IP20 Shell type with aperture Ф20mm MTBF >50000h Weight 120g

Current Transducer FPA-A1-P2-F1-03 hydraulic oil filter Dongfang Yoyik Engineering Co., Ltd provides professional spare parts of turbines, generators, and boilers for brands. Our primary business are EHC, TSI, MEH, DCS, excitation system, hydrogen oil water system, sealing compounds, and insulation materials. YOYIK provides multiple types of spare parts and equipments for power plant : #DF-CURRENT TRANSDUCER FPA-A1-P2-F1-03-DF thermocouple thermometer WRNK2-291 mechanic seal water pump HZB253-H75/110-C115-E1 00 11 magnetic coupling centrifugal pump DFB80-520-240 Screw pump HSNH210-36N sealing ring HB4-56J8-146 shaft seal mechanical 8b1d hydraulic piston pump spare parts 80AY100A MECHNICAL TRIP DEVICE rotary vane pump F320V12A1C22R multi stage centrifugal pump CZ50-250C burgmann mechanical seal CM104-45 vacuum pump 228v 30-WS-COML electric motor centrifugal water pump DFB80-80-220-03 Sealing Oil Vacuum Pump Coupling Cushion M02225.OBGCC1 chemical pump centrifugal DFB80-80-240 thermocouple k WRNKD2-291 3 wire thermocouple TE-209Temperature sensor, Pt100 WZPM2-001 o-ring 315X3.55 vacuum pump 239v P-1607 ball valve MHARKH-22L-20-4465-PHPN350/DN20 centrifugal pump impeller ISG150-160 Platinum Thermocouple Wire WPNKZ-630 piston vacuum pump MCY14-1B Thermocouple Control TE-211 Piston Ring for Exhaust Check Valve FH-84-200-2 3 wire thermocouple TC03A2-KY-2B/SPG electric motor centrifugal water pump KQW100/200-22/2 Bladder NXQ-AB-80/10 FY thermocouple machine TE-105 dc centrifugal pump DFB80-80-220-03 piston pumps PV29/-2R5D-F00 Gasket Pos.85 metal spiral gasket thermowell flange WRN-230 mechanical seal types 1D56-H75/95-00 00 11 CURRENT TRANSDUCER FPA-A1-P2-F1-03 rotary vacuum pump 30-WS P-2811 vacum pump air vacuum M01225.0BGCC1D1.5A-100-5-1.5 heater thermocouple TC03A2-KY-2B/S20 Synchronous signal measuring card U12k type thermocouple W08B0691A mechanical seal for pump BKM(FX)103055 Magnetic Reed Switch Level Transmitter BS-950MM6/12 AI ADAM-5017S vacuum pump P-2037 centrifugal pump impeller CZ50-250C pump mechanical seal G50 oil transfer pump SDH150-125-400A piston pump hydraulic PVH74QIC-RSM-1S-10-C25-31 three screw pump KF80NZ/4.0F6 type k thermocouple TE-107 centrifugal water pump KSB65-250A reciprocating piston pump PVH74-Q1C-RSM-1S-11-C25-31 centrifugal pump vertical DFB100-65-230 Surface Thermocouple TE-110 reciprocating pump 125LY-35-4 screw pump diagram DLZB820-R64A-2 vacuum pump 229v PVH74QIC-RSM-IS-10-C25-31 hand valve J61Y-P54 100V DN20 Filter element LH0330DO20BN3HC pump screw HSNS440-46 Slot Wedge thermocouple types W08Q0019A thermocouple temperature sensor WRKK2-221 CURRENT TRANSDUCER FPA-A1-P2-F1-03 DFYL-2022-4-6-ZYR

This device is designed to monitor AC leakage current, then produce a standard signal such as 4- 20mADC, 0-5VDC and so on. It can be applied to arrester state detection, insulation of some electrical equipments and leakage current detection. High overload capacity: This device can accept heavy current input which is up to 2000A and work in high voltage environment; High stability: This device can effectively suppress the interference; High safety: Great surge protection capacity and 35KV isolation. Rated input: 0~0.5-100mA AC optional Output signal: 0-5V;0-20mA;4-20mA optional Power supply: +12VDC;+15VDC;+24VDC optional Accuracy: 1% Output ripple: 2kohm; Current Outputâ?¤250ohm Temperature drift: â?¤400/ppm Response time: â?¤300ms Operating temperature: -20~+70 Quiescent power consumption: 360mW(with +12VDC power) Window size :Ã?20mm

The CE-IJ03 1 element AC current transducer is designed to measure and monitor average RMS AC current, then produce a standard signal such as 4-20mADC, 0-5VDC and so on. Rated input: 0-500AAC(average RMS current ; TRMS current optional) Output signal: 0-5V;0-20mA;4-20mA;1-5V;4-20mA loop powered;0-10V; oc frequency(0-5kHZ,0-10KHZ) Power supply: +12VDC;+15VDC;+24VDC, self power optional Accuracy: 0.5% optional Output ripple: 15mV Isolation: 2500V DC Load resistance: Voltage Output >2kohm; Current Output=250ohm Overload capacity: 20 times or