The Humming bird infrared thermometer measures the fever, the primary characteristic of virus infection such as Corona, Monkey pox..ect, and enables to detect a virus infection from the first step. With the combination of the time-proven MEMS state-of-the art sensing element with a fully integrated A/D converter and world-patented ISO thermal Cap sensor, Hummingbird always delivers an accurate and dependable temperature data regadless of ambient temperature.
Key Features
Instant Measurement Within 0.1 SEC
Accurate And Dependable Measuring Result
Bright And Clear Luminance Of Lcd, Makes Better Readability Even In Outdoor
CR -6062 Industrial grade fuel level transmitter (fuel level sensor) is a special instrument tailored for the accurate measurement of fuel level such as railway locomotive, automobile fuel tank, tank truck and fuel depot. The whole machine does not have any movable or elastic parts, and is resistant to impact, easy to install, high in reliability, high in precision, and good in performance and price. It can be installed in various occasions to accurately measure and control the fuel level of gasoline, diesel fuel and hydraulic fuel. It is also suitable for the measurement of various non-conductive liquids. Such products can also be used to measure conductive media in the case of particularly harsh on-site conditions, particularly severe electromagnetic interference, and particularly high agitation.
Detection range: 0.05 -5m
Accuracy: 0.1, 0.2, 0.5
Pressure range: -0.1MPa-32MPa
Probe temperature resistance: -50 -250
Output signal: 4-20mA, 4-20mA superimposed HART communication, 485 communication, CAN bus communication
Power supply voltage: 12-28VDC (Intrinsically safe type needs to be powered by safety barrier)
CR -6062 Standard Fuel Level Transmitter (Fuel Level Sensor) Industrial grade, suitable for measurement of viscous fuel quality below 5MPA and temperature below 200, can be connected with various protocols
CR -6062 Compact fuel level transmitter (fuel level sensor) Industrial grade, suitable for measurement below 5MPA, temperature less than 200, low viscosity fuel, can be connected with various protocols
Items
Technical parameter
Detection Range
a1000ppm
Max detecting bound
2000ppm
Detecting life
5 years
Sensitivity
0.015
Resolution
0.5ppm
Temperature range
Pressure range
Normal atmosphere
Response time(T90)
<50S
Humidity range
Zero shift
10ppm
Stability(/Month)
<10%
Load resistance(commend)
200|
Reproducibility
<10%output value
Output linearity
Linearity
"Our Liquefied Natural Gas (LNG) is a high-purity natural gas that has been cooled to a liquid state for easy storage and transportation. LNG is an efficient and environmentally friendly energy source suitable for various applications, from industrial use to residential heating.
Key Features:
1. High Purity: Composed primarily of methane, LNG offers high energy content and minimal impurities.
2. Efficient Storage: LNG is stored in a liquid state at extremely low temperatures, significantly reducing its volume for easier and more economical storage and transportation.
3. Environmentally Friendly: Burns cleaner than other fossil fuels, producing lower carbon dioxide, sulfur dioxide, and particulate emissions.
4. Versatile Applications: Suitable for a wide range of uses, including power generation, industrial fuel, and residential heating.
Applications:
1. Power Generation: LNG is used in power plants to generate electricity efficiently, providing a stable and reliable energy source.
2. Industrial Fuel: Ideal for various industrial processes, including manufacturing, chemical production, and metal processing, due to its high energy content and clean-burning properties.
3. Residential Use: Used for home heating, cooking, and hot water, offering a safe and efficient energy solution.
4. Transportation Fuel: Increasingly used as an alternative fuel for ships, trucks, and buses, LNG provides a cleaner and more cost-effective option compared to traditional diesel and gasoline."
2527 Cirius1 Miniature Infrared Methane Gas Sensor Suppliers
Short on time? Let Cirius1 Miniature Infrared Methane Gas Sensor sellers contact you.
2019 HOT 4-20mA infrared high non contact temperature sensor
Product Description
The infrared temperature sensor can calculate the surface temperature of the object by measuring the intensity of the infrared radiation emitted by the target without contacting the target. Non-contact temperature measurement is the biggest advantage of infrared thermometers, allowing users to easily measure targets that are difficult to access or move.
Theinfrared temperature sensor integrated the sensor, optical system and electronic circuit in a stainless steel housing. Easy to install, the standard thread on the metal housing can be quickly connected to the mounting part. There are also options (installation) Brackets) to meet the requirements of various working conditions.
Supply voltage
10-24V DC
Power consumption
1.2W
Accuracy
±1% or ±1.5
Circuit working temperature
Temp.: 0 ~60C
Humidity: 10 95% (No condensation)
Test temperature range
0-1000C (0-600default)
Spectral range
8 ~ 14 µm
Optical resolution
20:1
Respond time
150 ms (95%)
Size
113mm18mm(L*D)
Emissivity
0.95(fixed)
Output
4~20mA
Load capacity
600
Detail parameter
Detail parameter of high temperature infrared sensor.
Compact structure, easy to install
Infrared measurement, no need touching the measured object
Suitable for a variety of applications, 4 ~ 20mA output
Output stability, fast response
Safe to use, long life
Inquiry us for more discounts!
Two kind of infrared temperature sensor for your selection. For more questions, please contact us. Thank you!
How to use and wire?
Please follow us to use this Infrared temperature sensor and get wire connection.
Application
Electrical equipment, medical field
Food Construction Industry, Chemicals and Chemical Industry
temperature monitoring in process and production field
Metallurgy, petrochemicals, electric power, light industry, textile industry, food industry, National defense and scientific research
Specifications
* 0 - 30 bar absolute pressure range
* 6 coefficients for software compensation stored on-chip
* Piezoresistive silicon micromachined sensor
* Integrated miniature pressure sensor 6.2 x 6.4 mm
* 16 Bit ADC
* 3-wire serial interface
* 1 system clock line (32.768 kHz)
* Low voltage and low power consumption
* High Endurance (HM version)
Description:
The MS5541-30C is the high-pressure version of MS5541C pressure sensor module. It contains a precision piezoresistive pressure sensor and an improved version of the 16 Bit Micropower Sensor interface IC known from the MS5535C. The ESD sensitivity has been improved to 4kV on all pins. In addition to this the MS5541- 30C is from its outer dimensions compatible to the MS54xx series of pressure sensors. It uses an antimagnetic polished stainless steel ring for sealing with O-ring. The sensor provides 16 Bit pressure and temperature data via a 3 wire serial interface that can be easily interfaced with 4 Bit low power microcontrollers. 64 Bit of factory programmed PROM provides calibration data for a highly accurate pressure and temperature calculation.
Features:
* Resolution 3.0mBar
* Supply voltage 2.2V to 3.6V
* Operating current < 5µA
* Standy current < 0.1µA
* -40'C to +85'C
* No external components required
Applications:
* Diving computers and divers watches
* Mobile water depth measurement systems
* High endurance pad technology (HM version)
CR -6062 Industrial grade fuel level transmitter (fuel level sensor) is a special instrument tailored for the accurate measurement of fuel level such as railway locomotive, automobile fuel tank, tank truck and fuel depot. The whole machine does not have any movable or elastic parts, and is resistant to impact, easy to install, high in reliability, high in precision, and good in performance and price. It can be installed in various occasions to accurately measure and control the fuel level of gasoline, diesel fuel and hydraulic fuel. It is also suitable for the measurement of various non-conductive liquids. Such products can also be used to measure conductive media in the case of particularly harsh on-site conditions, particularly severe electromagnetic interference, and particularly high agitation.
The CR-6062 industrial grade fuel level transmitter (fuel level sensor) core components are converted to standard electrical signals (typically 4-20 mA) using advanced RF capacitance sensing circuits through 16-bit microcontrollers with precise temperature compensation and linear correction. Optional HART, CANBUS, 485 communication protocol for system configuration. The full range of transmitters are self-calibrating, allowing users to automatically calibrate zero and range with two buttons or two leads to suit different requirements in complex locations.
The sensing part of the CR-6062 industrial grade fuel level transmitter (fuel level sensor) is a coaxial container that causes a change in the capacitance between the sensor housing and the sensing electrode when the fuel enters the container. This variation is passed through the circuit. The conversion is performed with precise linear and temperature compensation, and a 4-20 mA standard signal is output to the display meter.
Detection gas
CO
Measurement Range
0~1000ppm
Max detecting concentration
2000ppm
Sensitivity
(3~12)nA/ppm
Resolution ratio
1ppm
Response time(T90)
30S
Load resistance(recommend)
1000
Repeatability
<3%output value
Stability(/month)
<10%
Output Linearity
linear
Zero drift
10ppm
Storage temperature
Storage Humidity
15%-90%RH
Pressure range(kPa)
90-110
Anticipated using life
5 years
TS318-1B0814 Infrared Thermopile Temperature Sensor DESCRIPTION
TS318-1B0814 used for contactless temperature measurement in many applications; transfer the heat radiation emitted from the objects into a voltage output.
TS318-1B0814 Infrared Thermopile Temperature Sensor Features
* Thermopile IR-Sensor
* For Contactless Temperature Measurement
* Single Element
* Small Package for Ear Thermometer
* High Signal
* Flat Filter
* Accurate Reference Sensor
TS318-1B0814 Infrared Thermopile Temperature Sensor FEATURES
* High Signal
* Ni-RTD Reference Sensor
* Small TO-18 Package
* 8-14um Band Pass Filter for measurement distances >0.5m
PSC-CX
Digital, two wire, loop powered infrared temperature sensor for OEM applications
PSC-CX Infrared Temperature Sensor Description
The PSC-CS self-Contained, 2-wire loop powered IR temperature sensor with 4-20 mA output features:
* High-performance, great value
* Simple 2-wire installation
* Wide range of -30'C to 900'C (adjustable with PSC Connect Software)
* Optical resolution of 22:1
* Optional USB programming interface
* Alarm output (0-30 V / 500 mA)
* Real-time 2-wire output and digital communication
* Versatile power requirements: 5-30 VDC
PSC-CX Infrared Temperature Sensor Specifications
* Temperature range (scalable via software): -30 - 900'Câ??
* Spectral range: 8 -14µmâ??
* Optical resolution: 22:1â??
* CF-Optics (optional): 0.6mm @10 mmâ??
* Outputs/analog: 4 - 20 mAâ??
* Environmental rating: IP 65 (NEMA-4)â??
* Ambient temperature: -20 - 75'Câ??
* Relative humidity: 10-95%, non condensing
TS418-1N426 Thermopile Infrared Sensor SPECIFICATIONS
* Thermopile IR-Sensor
* Filter for NDIR CO2 Gas Detection
* Single Element
* Very High Signal
* Flat Filter
* Small Package
* Accurate Reference Sensor
TS418-1N426 Thermopile Infrared Sensor DESCRIPTION
Thermopiles are mainly used for contactless temperature or non-dispersive infrared measurement in many applications. Their function is to transfer the heat radiation emitted from the objects or other infrared sources into a voltage output.
TS418-1N426 Thermopile Infrared Sensor FEATURES
* Very High Signal
* Accurate Reference Sensor
* 4.26µm Narrow Band Pass
* Small TO-18 package
TS418-1N426 Thermopile Infrared Sensor APPLICATIONS
* NDIR CO2 Gas Detection
-
4-10 beams infrared barrier detector
Newest interactive infrared emitting technology employed
Strong aluminum alloy hull against damage
Outdoor usage against rain, fog and strong light
Infrared emitting power can be adjusted from large, middle to small.
Alarm buzzer and led are utilized to help user to align the detector
Frequency conversion technology employed
Wired nc/no/com or wireless signal alarm output version available
Model no.Lgx-xx, x refers to beams, xx refers to distance
Alerting distance5 /10 / 20 / 30 / 40 / 50 / 60 / 80 / 100/ 150 meters
Beams quantities4, 6, 8, 10 beams
Light sourceInfrared light
Detecting methodSimultaneous interruption of 2 adjacent infrared beams
Response speed40ms
Power and voltage Dc 10~18v
Current consumption50-120ma, 12v
Operating conditionOperating temperature: -25?~+55?, relative humidity: 5-95%
Alarm-delay= 1s
Alarm outputNc and no, capacity dc30v/2a
Protection degreeIp55
Length70-165cm
4-10 beams infrared barrier detector
Newest interactive infrared emitting technology employed
Strong aluminum alloy hull against damage
Outdoor usage against rain, fog and strong light
Infrared emitting power can be adjusted from large, middle to small.
Alarm buzzer and led are utilized to help user to align the detector
Frequency conversion technology employed
Wired nc/no/com or wireless signal alarm output version available
Model no.Lgx-xx, x refers to beams, xx refers to distance
Alerting distance5 /10 / 20 / 30 / 40 / 50 / 60 / 80 / 100/ 150 meters
Beams quantities4, 6, 8, 10 beams
Light sourceInfrared light
Detecting methodSimultaneous interruption of 2 adjacent infrared beams
Response speed40ms
Power and voltage Dc 10~18v
Current consumption50-120ma, 12v
Operating conditionOperating temperature: -25?~+55?, relative humidity: 5-95%
Alarm-delay= 1s
Alarm outputNc and no, capacity dc30v/2a
Protection degreeIp55
Length70-165cm
FS1015CL series mass flow sensors are specially designed for medical equipment flow monitor and control applications, and are made with world leading proprietary MEMS mass flow designed channel with a low pressure loss. The current models can be readily applied to ventilators and anesthesia equipments. These sensors can also be sterilized in medical liquids for reuse or hygienic purposes.
FS1015 Series can measure a flow up to 150 SLPM. ISO-15mm connection model is readily applicable to ventilators and/or anesthesia equipments.
Features and Applications
- MEMS thermal mass flow sensor
- Excellent rangeability with integrated multiple sensing elements
- High stability at null and full scale
- Fast response
- Low power consumption
- Low pressure loss
FS4001 series mass flow sensors are manufactured using MEMS flow sensor and package technology. The sensors are specially designed for low flow rate range applications from 0 ~ 30 sccm up to 0 ~ 1000 sccm. The maximum flow rate for each model is manufactured via specially designed package as well as smart electronics so that the optimal sensitivity would be achieved.
Features and Applications
- Low mass flow range from 0 ~ 30 sccm up to 0 ~ 1000 sccm
- Outstanding accuracy of ±1.5 %
- Fast response (4 ms selectable)
- Pressure rating up to 5 bar (73 psi)
- Analog and/or digital user interface
- Easy installation
Gas leak detection in stationary fuel cells combustible gas sensor module
Model number:cgm6812--b00
Features:
* linear analog output proportional to gas
Concentration
* maintenance free
* compact size
* meets rohs requirements
Applications:
* gas leak detection in fuel cell systems
* hydrogen & combustible gas leak
Detectors
Description:
The cgm6812-b00 combustible gas sensor module is
A new unit which utilizes tgs6812, figaro's catalytic
Pellistor type gas sensor which features durability and stability.
This module provides analog output voltage proportional to hydrogen gas concentration.
Cgm6812-b00 has conformal coatings for moisture-
Proofing and electrical insulation purposes, and is also
Capable of detecting sensor wire breakage. The unit has
A wide range of operating temperature from -10' to +60'c.
Because the tgs6812 sensor can detect methane and lp gas
As well as hydrogen, this module is suitable for gas
Leak detection in stationary fuel cells which use hydrogen
Generated from combustible gases Sensor Module Cgm6812
Fs1015cl gas flow sensors description
Fs1015cl mass flow sensors are specially designed for medical equipment flow monitor and control applications, and are made with world leading proprietary mems mass flow designed channel with a low pressure loss. The current models can be readily applied to ventilators and anesthesia equipments. These sensors can also be sterilized in medical liquids for reuse or hygienic purposes.
Fs1015 series can measure a flow up to 150 slpm. Iso-15mm connection model is readily applicable to ventilators and/or anesthesia equipments.
Fs1015cl gas flow sensors features and applications
- mems thermal mass flow sensor
- excellent rangeability with integrated multiple sensing elements
- high stability at null and full scale
- fast response
- low power consumption
- low pressure loss
Misir is a low power (20mw4), high performance co2 sensor. Based on gss patented solid state ir sensor technology and innovative optical designs, misir is configured to meet the requirements of the hvac and demand led ventilation markets.
Low power 20mw
Measurement ranges from 0 to 1%
Low noise measurement
The Humming bird infrared thermometer measures the fever, the primary characteristic of corona virus infection, and enables to detect a corona virus infection from the first step. With the combination of the time-proven MEMS state-of-the art sensing element with a fully integrated A/D converter and an integrated ambient temperature sensor, Hummingbird always delivers an accurate and dependable temperature data.
Device Specifications:
PRECISION RANGE : 0.2C
MEASURING DISTANCE : 2cm ~ 5cm
AUTO POWER OFF : 10 sec �?�± 1 sec
MEASUREING PROCESS : LED Lamp + Buzzer
BATTERY : Changeable for two 3V triple A batteries
BATTERY LIFE : More than 2,500 times
OPERATION TEMPERATURE : 20C ~ 40C
STORAGE TEMPERATURE : -10C ~ 60C
DIMENSION : 40(W)mm x 70.8(D)mm x 153(H)mm
2527 Cirius1 Miniature Infrared Methane Gas Sensor Suppliers
Short on time? Let Cirius1 Miniature Infrared Methane Gas Sensor sellers contact you.
