Humidity Module HTG3513CH Voltage Output Humidity Sensor DESCRIPTION Based on the rugged HUMIREL humidity sensor, HTG3513CH is a dedicated humidity and temperature plug and play transducer designed for OEM applications where a reliable and accurate measurement is needed. Direct interface with a micro-controller is made possible with the module's humidity linear voltage and direct NTC outputs. HTG3513CH is designed for high volume and demanding applications. FEATURES * Voltage Supply: 3.3 Vdc * Nominal Output @55%RH: 1.462 - 1.568 V * Humidity Average Sensitivity: +18 mV/%RH * Current consumption: 1.0 mA dc * Humidity Measuring Range: 0 - 100 %RH * Humidity Operating Range: 0 - 100%RH * Temperature Operating Range: -40 - 110'C * Suitable for small bulk assembly * Product free from Lead, Cr (6+), Cd and Hg. Compliant with RoHS * Full interchangeability. Better than +/-3%RH and +/-0.25'C * Humidity calibrated within +/- 3% RH @ 55% RH * Temperature measurement through NTC direct output * Demonstrated reliability and long term stability * Reliability not affected by repeated condensations APPLICATIONS * Automotive * Home Appliance * Printers -
Digital Humidity Sensor with the interface to MCU is I2C HTU21D Model Number: HTU21D 1.Features: · DFN type package · Relative Humidity and Temperature Digital Output, I²C interface · Fully calibrated · Lead free sensor, reflow solderable · Low power consumption · Fast response time and very low temperature coefficient 2.Description HTU21D, the new humidity and temperature sensor of MEAS is about to set new standards in terms of size and intelligence: Embedded in a reflow solderable Dual Flat No leads (DFN) package of 3 x 3mm foot print and 1mm height it provides calibrated, linearized signals in digital, I²C format. HTU21D sensors are dedicated humidity and temperature plug and play transducers for OEM applications where reliable and accurate measurements are needed. Direct interface with a micro-controller is made possible with the module humidity and temperature digital outputs. HTU21D sensors are low power consumption designed for high volume and cost sensitive applications with tight space constraints. Every sensor is individually calibrated and tested. Lot identification is printed on the sensor and an electronic identification code is stored on the chip – which can be read out by command. Furthermore, the resolution of HTU21D sensor can be changed by command (8/12bit up to 12/14bit for RH/T), low battery can be detected and a checksum improves communication reliability. With made improvements and the miniaturization of the sensor the performance-to-price ratio has been improved – and eventually, any device should benefit from the cutting edge energy saving operation mode. 3.Description .Full interchangeability with no calibration required in standard conditions · Instantaneous desaturation after long periods in saturation phase · Compatible with automatized assembly processes, including Pb free and reflow processes . Individual marking for compliance to stringent traceability requirements 4 APPLICATIONS · Printers · Humidifier · Automotive · Home Appliance · Medical
Digital temperature and humidity sensor htu21d pcba Description Htu21d pcba, the new humidity and temperature sensor of meas is about to set new standards in terms of size and intelligence: embedded in a reflow solderable dual flat no leads (dfn) package of 3 x 3mm foot print and 1mm height it provides calibrated, linearized signals in digital, i²c format. Htu21d pcbasensors are dedicated humidity and temperature plug and play transducers for oem applications where reliable and accurate measurements are needed. Direct interface with a micro-controller is made possible with the module humidity and temperature digital outputs. Htu21d pcba sensors are low power consumption designed for high volume and cost sensitive applications with tight space constraints. Every sensor is individually calibrated and tested. Lot identification is printed on the sensor and an electronic identification code is stored on the chip – which can be read out by command. Furthermore, the resolution of htu21d pcba sensor can be changed by command (8/12bit up to 12/14bit for rh/t), low battery can be detected and a checksum improves communication reliability. With made improvements and the miniaturization of the sensor the performance-to-price ratio has beenimproved – and eventually, any device should benefit from the cutting edge energy saving operation mode. Parameters: 1)storage temperature: -40 to 125ºc 2)supply voltage: 3.8v 3)humidity operating range: 1-100%rh 4)temperature operating range: -40 to 125ºc 5)vdd to gnd:-0.3 to 3.6v 6)digital i/o pins (data/sck) to vdd:-0.3 to vdd+0.3v 7)-10 to +10 ma Features: (1)pcba type package (2)relative humidity and temperature digital output, i2c interface (3)fully calibrated (4)lead free sensor, reflow solderable (5)low power consumption (6)fast response time and very low temperature coefficient
Frequency output temperature and humidity module htf3223lf Model number: htf3226lf Description Based on the rugged hs1101lf humidity sensor, htf3223lf is a dedicated humidity and Temperature transducer designed for oem applications where a reliable and accurate measurement is Needed. It features a miniature connector for easy, cost-effective mechanical mounting. Direct interface With a micro-controller is made possible with the module’s linear frequency output. Main features -the best combination of cost effectiveness and performance -stable, linear proportional frequency output from 10 to 95% rh. -calibrated within +/- 5% rh @ 55% rh. -10 kohm +/- 3% ntc temperature sensor (1% optional) -stable and reproducible characteristics with temperature. -high reliability and long term stability. Humidity sensor specific features Instantaneous de-saturation after long periods in saturation phase. Fast response time. High resistance to chemicals. Not affected by water immersion. Patented solid polymer structure. Temperature sensor specific features High quality thermistor Stable High sensitivity
Temperature and moisture detectors are of paramount importance across multiple sectors, encompassing the realms of ecological surveillance, farming, HVAC mechanisms, and industrial production methods. These sensors require protection from external factors such as dust, moisture, and temperature fluctuations to ensure accurate and reliable measurements. Parameters Brand: TOPTITECH Size: Dia14*27H Pore size:30microns Application: temperature and humidity sensor protection cover Features High Porosity: Porous Ti elements exhibit a high degree of porosity, which allows for excellent permeability to air and moisture. The interconnected network of small pores enables the ingress and egress of gases while providing a physical barrier against larger particles. This feature ensures efficient ventilation and prevents the accumulation of moisture or contaminants on the sensor surface. Thermal Stability: Titanium is renowned for its exceptional thermal stability. Porous Ti elements can withstand a wide range of temperatures without experiencing significant structural changes or degradation. This property is especially crucial for temperature sensors, as it ensures the protection cover can endure extreme conditions without affecting the sensor's performance. Corrosion Resistance: Titanium exhibits excellent corrosion resistance, making it an ideal material for sensor protection in humid or corrosive environments. Porous Ti elements are highly resistant to various chemicals, including acids, alkalis, and salts. This corrosion resistance extends the lifespan of the protection cover and maintains the sensor's accuracy and reliability over time. Lightweight and Durable: Porous Ti elements are lightweight yet durable, providing a balance between mechanical strength and weight reduction. Their low density makes them suitable for applications where weight is a concern, such as aerospace or portable sensor devices. Additionally, the robust nature of porous Ti ensures longevity, reducing the need for frequent maintenance or replacement. Applications Environmental Monitoring: Temperature and humidity sensors used in environmental monitoring systems are often exposed to outdoor conditions. Agricultural Industry: In agriculture, temperature and humidity sensors play a vital role in optimizing crop growth and preventing diseases. HVAC Systems: Heating, ventilation, and air conditioning (HVAC) systems rely on accurate temperature and humidity measurements to achieve optimal indoor comfort.
DHT11 Temperature and Humidity Sensor Module Product Overview DHT11 digital temperature and humidity sensor is a calibrated digital signal output of the temperature and humidity combined sensor. It uses a dedicated digital modules capture technology and the temperature and humidity sensor technology to ensure that products with high reliability and excellent long-term stability. Sensor includes a resistive element and a sense of wet NTC temperature measurement devices, and with a high-performance 8-bit micro-controller connected. DHT11 Temperature and Humidity Sensor Module Applications HVAC, dehumidifiers, testing and inspection equipment, consumer goods, automotive, automation, data loggers, weather stations, home appliances, humidity regulator, medical and other relevant humidity measurement and control. DHT11 Temperature and Humidity Sensor Module Product Highlights Low-cost, long-term stability, relative humidity and temperature measurement, excellent quality, fast response, anti-interference ability, long distance signal transmission, the digital signal output, precise calibration. DHT11 Temperature and Humidity Sensor Module Specifications * Humidity Range: 5~95%RH * Humidity Accuracy: ±5%RH * Humidity Hysteresis: < ±0.3%RH * Temperature Range: -20~+60 deg C * Temperature Accuracy (25°C): ±2 deg C * Temperature Repeatability: ±1 deg C * Power supply: DC 3.3 ~ 5.5V * Output signal: Single
AM2315 Digital Temperature and Humidity Sensor Product Overview AM2315 humidity capacitance is a digital temperature and humidity module contains a digital IIC output has been calibrated temperature and humidity combined sensor. It uses a dedicated digital module acquisition techniques and temperature and humidity sensor technology to ensure that products with high reliability and excellent long-term stability. Sensor includes a capacitive humidity sensing element and a high-precision temperature measurement devices, and with a high-performance 8-bit microcontroller connected. Therefore, the product has excellent quality, fast response, anti-interference ability, high cost and other advantages. AM2315 Digital Temperature and Humidity Sensor Product Features â?¢ Fully calibrated â?¢ Digital signal output â?¢ Ultra-low power â?¢ Excellent long-term stability â?¢ Standard single-wire output AM2315 Digital Temperature and Humidity Sensor Applications HVAC, dehumidifiers, testing and inspection equipment, consumer goods, automotive, automation, data loggers, appliances, humidifiers, medical, weather, and other relevant humidity detection control. AM2315 Digital Temperature and Humidity Sensor Product Highlights Ultra-low power, transmission distance, fully automated calibration, using capacitive humidity sensor, completely interchangeable, standard digital single-bus output, excellent long-term stability, high precision temperature measurement devices. AM2315 Digital Temperature and Humidity Sensor Sensor Performance * Humidity range: 0~99.9%RH * Temperature range: -40 ~ +80 deg C * Humidity Accuracy: ±2%RH * Temperature Accuracy: ±0.3 deg C * Humidity Repeatability: ±0.1%RH * Temperature Repeatability: ±0.2 deg C * Service voltage: 3.3V to 5.5V * Output signal: IIC
Humidity Module HTG3513CH Voltage Output Humidity Sensor DESCRIPTION Based on the rugged HUMIREL humidity sensor, HTG3513CH is a dedicated humidity and temperature plug and play transducer designed for OEM applications where a reliable and accurate measurement is needed. Direct interface with a micro-controller is made possible with the module's humidity linear voltage and direct NTC outputs. HTG3513CH is designed for high volume and demanding applications. FEATURES * Voltage Supply: 3.3 Vdc * Nominal Output @55%RH: 1.462~1.568 V * Humidity Average Sensitivity: +18 mV/%RH * Current consumption: 1.0 mA dc â?¢ Humidity Measuring Range: 0~100 %RH * Humidity Operating Range: 0~100%RH * Temperature Operating Range: -40 ~110'C * Suitable for small bulk assembly * Product free from Lead, Cr (6+), Cd and Hg. Compliant with RoHS * Full interchangeability. Better than +/-3%RH and +/-0.25'C * Humidity calibrated within +/- 3% RH @ 55% RH * Temperature measurement through NTC direct output * Demonstrated reliability and long term stability * Reliability not affected by repeated condensations APPLICATIONS * Automotive * Home Appliance * Printers
Relative Humidity sensor - HM1520/HM1520LF Based on the rugged HS1101LF capacitive humidity sensor, HM1520LF is a dedicated humidity transducer designed for measurements at low humidity. Direct measurement of dew point or water concentration can be easily obtained in really cost effective conditions. Direct interface with a micro-controller is made possible with the moduleâ??s linear voltage output. Main Features * Tubular form for through wall mounting * Not affected by water condensation * Full interchangeability * Typical 1 to 1.6 Volt DC output for 0 to 20% RH at 5 V DC supply * Calibrated, linear voltage for easy electronic interface * Controlled temperature dependency * Ratiometric to voltage supply Humidity Sensor Specfic Features * No affected by long period at low humidity values. * Patented solid polymer structure. * High resistance to chemicals. * Fast response time.
Hi, I'm Lynn from Apollosense Ltd,As a professional supplier of sensors for 15 years,we specilized in Gas sensors,Pressure sensors,Liquid level sensors,Humidity sensors and so on. If you are interested with our products you can contact me any time. And the website of our company is www.apollounion.com ,you can learn about it there. Waiting for your early reply. DESCRIPTION Based on the rugged HS1101LF humidity sensor, HTF3226LF is a dedicated humidity and temperature transducer designed for OEM applications where a reliable and accurate measurement is needed. It features a miniature connector for easy, cost-effective mechanical mounting. Direct interface with a micro-controller is made possible with the module’s linear frequency output. FEATURES APPLICATIONS • The best combination of cost effectiveness and performance • Stable, linear proportional frequency output from 10% to 95%RH • Stable and reproducible characteristics with temperature • High reliability and long term stability Humidity Sensor Specific Features • Instantaneous de-saturation after long periods in saturation phase • Fast response time • High resistance to chemicals • Not affected by water immersion • Patented solid polymer structure Temperature Sensor Specific Features • High quality thermistor • Stable • High sensitivity
The SUS316 humidity sensor housing for sensor probe offers exceptional reliability and durability, making it an ideal solution for safeguarding sensor probes in industrial or harsh environments. Constructed from sintered 316L powder material, this housing features a stainless steel shell that excels in gas permeability and high temperature resistance. Unlike traditional copper or nickel particle shells, the stainless steel construction of the SUS316 humidity sensor housing ensures long-lasting performance and precise humidity measurements, making it the top choice for demanding applications. Standout features of the SUS316 humidity sensor housing include its outstanding gas permeability and extended service life. The sintered stainless steel shell allows seamless gas transmission, enabling accurate humidity measurements even in challenging environments. Additionally, the SUS316 housing exhibits exceptional resistance to high temperatures and corrosion, providing unparalleled protection for the sensor probe and ensuring a prolonged lifespan. Parameter Material: stainless steel 316L Size: customized Pore size: 5-100um Thread interface: M6, M8, M10,M11 and others (customized is available) Features High Mechanical Strength for Enhanced Durability The SUS316 humidity sensor housing for sensor probe boasts exceptional mechanical strength, ensuring unparalleled durability and long-lasting performance. Its robust construction can withstand demanding environments, making it highly reliable for protecting sensor probes in industrial or harsh conditions. Good Rigidity for Reliable Protection With excellent rigidity, the SUS316 humidity sensor housing offers reliable protection for sensor probes. Its sturdy structure helps shield the sensor from external impact or potential damage, ensuring accurate and consistent humidity measurements even in challenging applications. Oxidation Resistance for Longevity Designed with exceptional oxidation resistance, the SUS316 humidity sensor housing effectively prevents the formation of rust or corrosion. This feature ensures a prolonged service life, even in environments with high humidity or exposure to corrosive substances. Corrosion Resistance for Reliable Performance The SUS316 humidity sensor housing is highly resistant to corrosion, making it an ideal choice for harsh environments. It can withstand the corrosive effects of moisture, chemicals, and other substances, ensuring the integrity and reliability of the sensor probe over an extended period. No Need for Additional Skeleton Support Protection for Easy Installation The SUS316 humidity sensor housing eliminates the requirement for additional skeleton support. This simplifies the installation process, reducing complexity and saving time. The housing's self-supporting structure ensures a hassle-free and efficient installation experience.
Humidity & Temperature sensor - HTU21D 1.Product Description: HTU21D, the new digital humidity sensor with temperature output of MEAS is about to set new standards in terms of size and intelligence: Embedded in a reflow solderable Dual Flat No leads (DFN) package of 3 x 3 mm foot print and 0.9 mm height it provides calibrated, linearized signals in digital, I²C format. HTU21D digital humidity sensors are dedicated humidity and temperature plug and play transducers for OEM applications where reliable and accurate measurements are needed. Direct interface with a micro-controller is made possible with the module humidity and temperature digital outputs. HTU21D digital humidity sensors are low power consumption designed for high volume and cost sensitive applications with tight space constraints. Every sensor is individually calibrated and tested. Lot identification is printed on the sensor and an electronic identification code is stored on the chip – which can be read out by command. Furthermore, the resolution of HTU21D digital humidity sensor can be changed by command (8/12bit up to 12/14bit for RH/T), low battery can be detected and a checksum improves communication reliability. With made improvements and the miniaturization of the sensor the performance-to-price ratio has been improved – and eventually, any device should benefit from the cutting edge energy saving operation mode. 2.Main Application: • Automotive • Home Appliance • Medical • Printers • Humidifier • Multimedia: Smartphone, Tablet 3.Main Features: • Full interchangeability with no calibration required in standard conditions • Instantaneous desaturation after long periods in saturation phase • Compatible with automatized assembly processes, including Pb free and reflow processes • Individual marking for compliance to stringent traceability requirements. 4. PERFORMANCE SPECS : 5. ELECTRICAL AND GENERAL ITEMS : 6. SENSOR PERFORMANCE : 7. RELATIVE HUMIDITY ERROR BUDGET CONDITIONS AT 25° C :
Features : Designed for industrial application. Resistant to high temperature and high pressure. Sensor type : Capacitive Humidity Sensor & Pt 100 A class Measuring range : 0 +180 Output : 0 ... 20 mA / 4 ... 20 mA / 0 ... 10 V Accuracy : Temperature 0.15 C / Humidity 2%RH IP rating : IP65
Metal threaded body, m30, flushed/non-flushed, 10-30vdc, sn:10mm/15mm, npn/pnp, no/nc, cable /connector connection/reverse polarity, surge, overload and short-circuit protection, yellow led indicator, ip67 M30*43, m30*55
Diameter: m5, m8, m12, m18, m30 142g
Humidity sensor Capacitance from 150 to 270 pf At 55%rh Sensitivity : 0.2 % by %rh Response time 0.3 s Resolution 0.05 pf Accuracy-interchangeability : 3 %hr de 3 a 97%hr Measurement range 0 a 100 %hr Operating range : -70ªc a +80ªc Supply voltage max :12v Not sensible at dc composent 8 x 9 x 1 mm3
MHR1B humidity sensor module The MHR1B humidity sensor module is designed by Ningbo Junrong Electron. This product with characteristics of stable, best price, good crossing-over and with temperature retrieves performance. It is also ideal to measure temperature and humidity in air-conditioning, dehumidifier, humidifier. 1. Application: Air-conditioning, dehumidifier, humidifierr, Electron, pharmaceutical industry, food processing, warehouses, tobacco, textile, weather, libraries and museum. 2. Specification: (1). Power supply (vin): DC 5V+/-5% (2). Consume current: 1.6mA (max 3mA) (3). Temperature operating range: 0-50 (4). Humidity operating range: Under 95%RH(non dew) (5). Humidity measuring range: 20-95%RH (6). Temperature storing range: 0-70 (7). Humidity storing range: Lower 95%RH (non dew) (8). Humidity measuring Accuracy: +/-5%RH (at 25, 60%RH vin=5.0V), output 1815-2145mV (9)dimension: 28*18*8mm 28*18*8mm
Humidity and temperature sensor module 1. General mhtc1a humidity and temperature sensor module is designed base capacitive humiture sensor by ningbo junrong electron. This product utilizes humidity sensor capacitor and temperature sensor (lm35, america), with characteristics of stable, high accuracy, quick response, good crossing-over and it also use craftwork of smd, and so own extremely small body, stable and reliably performance. The quality guarantee time is 12 months. 2. Application electron, pharmaceutical industry, food processing, warehouses, tobacco, textile, weather, libraries and museum. 3. Shape model encapsulation shape mhtc1a humidity and temperature sensor module without shell detail to the picture 4. Model there are three models according to with or without temperature and humidity sensor. Mhc1a humidity measuring module, without temperature element mhtc1a1 temperature and humidity measuring module, with ntc resistance mhtc1a2 temperature and humidity measuring module, with lm35 temperature sensor 5. Specification (1) power supply (vin) dc 5vf+5% (2) electrical current 2ma (max 5ma) (3) temperature operating range 0 ~ 70fª (4) humidity operating range 0 ~ 100%rh (dew point) (5) humidity measuring range 2 ~ 99%rh (6) temperature storing range -20 ~ 85fª (7) humidity storing range under 95%rh (no dew point) (8) humidity measuring accuracy mhtc1a f+3%rh ( at 25fª, 60%rh ) 24.5*13.5*17mm
Humidity and temperature sensor module Specification (1) power supply (vin) dc 5vf+5% (2) electrical current 1.9ma (max 5ma) (3) temperature operating range 0 ~ 50fª (4) humidity operating range under 95%rh (5) humidity measuring range 30 ~ 90%rh (6) temperature storing range 0 ~ 70fª (7) humidity storing range lower 95%rh (8) humidity measuring accuracy f+5%rh ( at 25fª, 60%rh vin=5.0v 1.65`1.95v ) (9) typical humidity data responding to output 24.5*13.5*17mm
HG23 humidity sensor 4.1 Input power: 1VAC (sine wave), 1kHz 4.2 Operating temperature range: -20=J ~ 70=J 4.3 Operating humidity range: 95 %RH or less 4.5 Accuracy: f+2.5 %RH (at 25=J, 60 %RH) 4.6 Hysteresis: within 2 %RH (40 %RH ~ 80 %RH) 4.7 Stability: 1 year < 2 %RH 500pcs/bag 10000pcs/carton
