Hi,
I'm Lynn from Apollosense Ltd,As a professional supplier of sensors for 15 years,we specilized in Gas sensors,Pressure sensors,Liquid level sensors,Humidity sensors and so on. If you are interested with our products you can contact me any time. And the website of our company is www.apollounion.com ,you can learn about it there. Waiting for your early reply.
DESCRIPTION
Based on the rugged HS1101LF humidity sensor, HTF3226LF is a dedicated humidity and temperature
transducer designed for OEM applications where a reliable and accurate measurement is needed. It features a
miniature connector for easy, cost-effective mechanical mounting. Direct interface with a micro-controller is
made possible with the module’s linear frequency output.
FEATURES
APPLICATIONS
• The best combination of cost effectiveness and
performance
• Stable, linear proportional frequency output from
10% to 95%RH
• Stable and reproducible characteristics with
temperature
• High reliability and long term stability
Humidity Sensor Specific Features
• Instantaneous de-saturation after long periods in
saturation phase
• Fast response time
• High resistance to chemicals
• Not affected by water immersion
• Patented solid polymer structure
Temperature Sensor Specific Features
• High quality thermistor
• Stable
• High sensitivity
We Can Supply Freestyle Libre 2 Flash Glucose Monitoring System Sensor Please Dont Hesitate to Contact Us in Case of Any Interested
Supplier: Wireless charger, batteries power bank, dust sensor, optical disc drive, tof, lidar, ar glass
Product description VFD for biomass burner, biomass gasification burner. For electric cabinet frequency and voltage converting, to meet different countries voltage. Ensure the bioamss burner can work well.
Supplier: Wired magnetic door sensors.
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
Economic and reasonable OEM humidity sensor module Humidity voltage output: 1-3.6V Low power consumption Long stability and proven reliability not affected by repetitive condensations Direct interface with micro-controller RoHS Directive-compliant
Based on the rugged HUMIREL humidity sensor, GP3515 is a dedicated humidity and temperature plug and play transducer designed for OEM applications where a reliable and accurate measurement is required. Direct interface with a micro-controller is made possible with the moduleâ??s humidity linear voltage and direct NTC outputs. GP3515 is designed for high volume and demanding applications. Main features Tests under harsh chemical conditions demonstrate good operation in presence of salt atmosphere, SO 2 (0.5%), H 2 S (0.5%), O 3 , NOx, NO, CO, Softener, acids (H 2 SO 4 , HNO 3 , HCl), HMDS, Insecticide, Cigarette smoke . Product free from Lead, Cr (6+), Cd and Hg. Compliant with RoHS Reliability not affected by repeated condensations Full interchangeability. Better than +/-3%RH and +/-0.15°C Typical 1 to 3.6 Volt DC output for 0 to 100% RH at 5 V DC supply Humidity calibrated within +/- 3% RH @ 55% RH Temperature measurement through NTC 10 kΩ +/- 1% direct output Ratiometric to voltage supply within the specified range Resistance to chemical and physical stresses · GP3515 has circuit to protect against Electrostatic discharges upto 15 KV air discharge. · GP3515 is protected against reverse polarity · GP3515 is not light sensitive · Additional tests under harsh chemical conditions demonstrate good operation in presence of salt atmosphere, SO 2, O 3, NO, CO,CO2, Softener, Soap, acids. -
1. General Our humidity and temperature sensor module is designed base capacitive humidity and temperature sensor by GP Systems. This product utilizes humidity sensor capacitor (HS1101, France Humirel) with optional temperature sensor Pt100 , with characteristics of stable, high accuracy, quick response, good crossing-over and it also use craftwork of SMD, and so own extremely small body, stable and reliably performance. The quality guarantee time is 12 months. 2. Application Electron , pharmaceutical industry, food processing, warehouses, telecom industry, AHUâ??s, Humidity chambers etc. 3. Shape Module (GP15AP) encapsulation shape: With or without shell detail to the picture 4. Specifications: a) Power Supply: 5 V DC b)Electric Current : 2 mA ( Max. 5 mA) c) Temperature operating range: 0-90 0 C d) Humidity operating range: 0-100% Rh (Dew point) e) Humidity measurement range: 2- 99%Rh f) Temperature storing range: -20 to 85 0 C g) Humidity storage range: Under 95% Rh ( Below dew point) h) Accuracy: 2% Rh (At25 0 C and 60%Rh) -
Applications: H2,3,4 humidity and temperature transmitters are designed for environment monitoring and controlling in industrial, commercial and other buildings. These transmitters can be used for: Humidity and temperature monitoring of supply, exhaust and return air(H2, duct mount) Humidity and temperature monitering in critical environment such as outside air(H3, outside mount) Other applications of immersion humidity and temperature monitoring(H4, separate probe) Features: High performance digital sensors and circuits, ensure accurate measurement and temperature compensation Good long term stability and reliability 100% field changeable sensors, no re-calibration needed Fast response Multiple output signals selectable Industrial design, SS probe and sintered filter High protection rate to IP65 Specifications: Relative Humidity: Sensor: Capacitance polymer Range: 0~100%RH Output: 4~20mA /0~10VDC/RS485 Accuracy: 2%,3%RH(25ípC,20~80%RH) Hysteresis:
