Bubble film.
Request an online quotation for Detectable Warning Tape via our website at: https://www.indevcogroup.com/building-construction/detectable-warning-tape/ Underground detectable warning tape is used in construction zones for alerting excavation crews about hazards, and underground cables, as well as provides easy buried pipeline detection and other types of warnings through printed messages on a roll. We also produce Non Detectable Warning Tape.
BOPP Laminated Fabric offered comprises multicolour BOPP Laminated fabric that can be used for production of unprinted/printed PP Woven Sacks/Bags. The presence of quality fabric also ensures precision manufacturing standards maintained in these bags that provides in them superior end usage values. The use of BOPP fabric in bag form has come up as a fresh/new concept for meeting the demands of bulk packaging in different weight options that can start from 5 kgs to 15 kgs. The use of BOPP fabric in bag form has come up as a fresh/new concept for meeting the demands of bulk packaging in different weight options that can start from 5 kgs to 75 kgs.
JHG offer high quality of EVA film the main thickness is 0.38/0.50/0.76/1.52mm, the width is from 2000-2450mm , avial colour is super transparent ,normal transparent, white,grey ,bronze ,green,red ,yellow ,purple . The size and color also can be customized for big quantity inquiry.
The demand to offer different productive solutions to its own customers, has allowed Torninova to apply its own technicall ability and experience in the production of air bubble film, in the production of machinery with in-line processing equipped with cast extruders (mono). The plant Power Bubble put together all the modern technologies and stand out for the following characteristics: Extruders with a.c. motor mounted in axis and controlled by inverter with nitrided steel barrier screws realized to plasticize and homogenize the material to extrude in different diameters according the request production capacity. Flat die with double delivery or separated flat dies for a good control and adjustments of the produced films, realized in steel with adjustable deliveries. Infrared Barrel Heating power saving up to 20%, long heater element life and quicker cooling response times Forming unit climbed on guide and rack arms that allow the automatized movement from the stand-by position to the production position thought PLC. The forming cylinder is mounted on mobile structure (motorized and controlled by PLC) in both the directions for the regulation of the materials deliver for the flat dies and for its fast interchangeability. Main control panel managed by PLC, complete with supervision software managed through touch screen that allows the planning and the control of the whole plant. The forming cylinder is thermoregulated by a water thermoregulation unit in order to maintain more constant its temperature Produced air bubble film width from 1.000mm to 2.500mm (or more on request) The plant can be equipped (also in a second time thanks to its modularity) with various accessories: Forming cylinders with bubbles in different sizes Perforating unit equipped with brushless motor. Cast cylinders thermoregulated by diathermic oil units for a better control of the produced films Third and fourth layer unit that allow the in-line lamination of one or two sides of air bubble film eliminating others processing Trimmed edge recovery systems that allow the in-line recycling of the trims with hopper feeding extruder Gravimetric blending and metering for up to 4 ingredients for a more accurate and automated management of the granules to be extruded Ink-jet printing unit to personalize the material with logos and symbols
The twin bubble machine allow to produce in-line (without further steps) an air bubble film for insulation applications composed of: two layer of air bubble film laminated with coated aluminium foil on the external side. The machine can produce, of course, air bubble film in 2 or 3 layers for the packaging market. The twin bubble system has the following characteristics: Two extruder for the production, at the same time, of the two layers of air bubble film and one, placed in the middle, for their lamination. Two interchangeable forming cylinders Rewinder with automatic cycle that allow to produce rolls from 25 up to 150 mt and more. Possibility to add two additional lamination unit by hot air in order to laminate a layer of foam in the centre of the material (between the two layers of air bubble film). Recommend for the air bubble film production for insulation market
The coex bubble plant, represents the state-of-the art machine among the torninovaÆs production range . It has got all the most sophisticated technologies for air bubble film production, in order to ensure the easy production to the customer, thanks to the full automation of the co-extrusion process, to reach a film with air-barrier effect, that keeps the air inside the bubble for a longer time. The main advantages of such air bubble film are: Better cushioning protection compared with a thicker mono-extruded bubble film: the co-extruded bubble film offers higher air retention (thanks to the internal layer of PA6) and then ensures effective long-term cushioning performances from packing to final delivery. It means also extra strength of each bubble and then extra protection of the goods. Better protection with thinner plastic film: it means better performance with less raw material consumption. Reusable : his long lasting cushioning performances allows to use the same air bubble film for many times. Recyclable : the co-extruded bubble film could be recycled with other polyethylene material An air bubble film of 35 g/,2, produced by co-extrusion process, can be compared, in terms of resistance, with a mono-extrusion air bubble film of 55 g/m2. They have same resistance. Considering such relationship, it means that you save the 30% of the cost for raw materials, by using co-extrusion production process. Mainly, it is composed by three extruders: one for PE layer, one for the PA6 layer and the third one for the TIE layer between PE and PA6. These three extruders, through the last generation of feed-blocks with adjustable geometry allow the production of the special co-extruded air bubble films with ABCBA structure. You can easily understand the co-extrusion process through the following layout: The COEX BUBBLE plant has got the following features: Extruders with a.c. motors mounted in axis and with universal screws in wear-resistant steel, with modular profiles with barrier double thread, in different diameters according to the level of production requested. Every extruder is equipped with a filter and a gear pump with transmission by cardan joint and motor with inverter and feedback loop control. The gear pump, through PID control, adjust automatically the speed of the extruder according to the capacity requested by the production formula and to the desired extrusion pressure. Two separated flat dies for an excellent control and adjustments of the produced films, realized in steel with adjustable deliveries. The feed-block with adjustable geometry, allows the distribution uniformity of the internal layer of polyamide (PA6) on the whole width of the film, also with thickness less than 0.5 micron. Gravimetric blending and metering for the ingredients, for a more accurate and automated management of the granules to be extruded. Forming unit climbed on guide and rack arms that allow the automated movement from the stand-by position to the production position thought PLC. The forming cylinder is mounted on mobile structure (motorized and controlled by PLC) in both the directions for the regulation of the materials delivery from the flat dies and for its fast interchangeability. Main control panel managed by PLC, complete with supervision software managed through touch screen that allows the planning and the control of the whole plant . The production control occurs by formula that the operator can personalize according to the co-extrusion percentage he needs and to the speed of production. The forming cylinder is thermoregulated by a water thermoregulation unit in order to maintain more constant its temperature. Width of the produced film: from 1.000 mm up to 2.500 mm (or more on request) The plant can be equipped (also after installation, thanks to its modularity) with several accessories: Moulder cylinder with bubble in different diameters Perforation unit with brushless motor Cast cylinders thermoregulated by diathermic oil units for a better control of the produced films Third and fourth layer unit that allow the in-line lamination of one or two sides of air bubble film eliminating others processing Trimmed edge recovery systems that allow the in-line recycling of the trims with hopper feeding extruder Fast Loading system on the rewinder, that allows, in automatic way, to unload the produced roll with closing system by glue and the loading of the new carton core with application of ôhot-meltö glue. The machines are fully customizable. Contact us to project the most suitable plant for your production and market necessity.
Pvc Stretch Film Air Bubble Nylon And Bags Silage Films .
We supply Film Faced Plywood ( Shuttering Plywood) with Original Dynea film red brown, brown film (40/128 grade), 30kg, densified Film Faced (15mm to 12mm),11 ply, 12mm thickness (+/- .5mm), 10-15times repetition, 72Hours WBP Glue (Phenol Formaldehyde). Hot press-40minute heating and cooling cycle. Rubber wood + Poly core: 30Kg: Rubber wood + Full core: 30Kg: Eucalyptus + Full core: 38Kg: Benefits: more usages, more load bearing, less scaffolding, save on labor cost. Origin: India, China
Led bulb, tube light, panel light, decoration light, wall light, steel wires, steel plate, stainless steel plate, twisted wire rods, galvanized wires, wire mesh, site fencing, mosquito mesh, thread rods, rebar, twisted rods, t bar, nuts and bolts, hardware, pvc pipes, upvc pipes, api pipes, melamine, mdf board, plywood, film faced, shuttering, packing, core veneer, face veneer, hdf molded door skin, door filler, tubular particle boards, pvc boards, wpc boards, doors, block board, hard board, gypsum board, canopy, carpet, flooring wooden, bamboo, laminated engineering, tiles, granite tiles, granite blocks, black galaxy, wash basin, water closets, washbasins, ss sinks, faucets, furniture, pvc edge bending, crew, locks, pvc seals, silicone cartridges, shower enclosures, shower door hinges, handles, knobs, brackets, slides, nails, solar panels, flexible solar panels, solar power station, battery, inverters, rechargeable fans, lights, spring, 3ply disposable face mask, oxygen concentrator ,.Buying office, oem, components sourcing, value added services
Kraft paper bubble mailers, metallic bubble mailers, poly bubble mailers, bubble bags, lacing garbage bags, flat garbage bags, carpet protective film and PE, PO, OPP, CPE, PVC plastic packing bags.
For providing excellent mechanical and optical properties for industrial applications. This film is used for wickets or regular bags for bakery, grain packaging, and much more. Request a quote online from our E-Catalogue at website Our CPP Films: Have tailored coefficient of friction Are characterized by high clarity & high sealing performance Our Plants also produce PE Films, Shrink Films as well as Pallet Covers.
Big Babol Bubble Gum Available variants Assorted TSPBM 12x100x3.5gr, asteroid Sour, Asteroid (Tutti Fruity, Watermelon, Blueberry), Assorted TSPBM, Strawberry Cream, Tutti Fruity 16x40x3.3gr, Filo Folly Strawberry,Fili Folly Tutti Fruity 12x6x11gr, Stick Dsp Blueberry, Stick Dsp Strawberry Cream, Stick Dsp Tutti Fruity, 20x20x20gr, Sploosh Strawberry 16x70x3.5gr. Product is Manufactured by PT Perfetti Van Melle.
Containers, vacuum seal bags, thermoformed films, lidding films, shrink films, food kraft bags, air cushion bag.
Leading Manufacturer of stretch film roll from Delhi Packaging Size100 mm to 1000 mm Gauge 10 Micron Thickness 10 mm to 1000 mm
Fd-bm800-v five layers blow film extrusion line Fd-bm800-v five layers blow film extrusion machine can produce various kinds of film according to different raw materials and processing technology, which has the function such as resisting high temperature, resisting low temperature, cooking, hot enveloping and printing, etc. It can produce following composite film: a/b/c/d/e, a/b/c/b/a, a/b/c/d/c etc. The composition can be changed freely, the calculated parts can calculate exactly, so can reach the aim to save the expensive material. So it is the ideal equipment to produce five layers film of pa, evoh, pvdc material. 7000kg
The polyboll machine is customizable with different options as moulder cylinders with different bubbles size, third and fourth layer unit, automatic loader for pellets, etc.
Request quote for thermoforming barrier films for packing and preserving dates. Film Thickness 60 300 microns Film Width 100 2000 mm