- Due to circulational cooling system the pressing process is done faster. - There are rails and locks installed on the machine in order to put on silicon membrane and to work with natural veneer. - There is an automatic film fixation mechanism, that helps save time preparing before the pressing. Also it helps prevent defects on the pressed pieces, that may arise as a consistence of wrong replacement of the film on the worktable. - Press head lifters are designed to prevent swashes of the head of the machine. -Air dispersion system provides a proportional dispersion of the air inside the machine while pressing, so the air temperature in each corner of the machine is the same. -After recent modifications the quality of covering of wood pieces with PVC has risen. -The machine is extremely easy for use, so it can be used even by low-qualified workers. -There is one machine better than this one- it is membrane-vacuum press with additional air pressure. Vacuum 40 m3/hour The dimensions of the machine 2800 x 1600 mm x 1500 mm Total power 27,5 Kw The dimension of the worktable 1400 x 2500 mm The area of the worktable used 1200 x 2300 mm The time required for pressing process (up to material) 2-20 min. Circulational cooling system The system of automaic fixing of PVC or similar materials. Automatic vacuum system Weight 600 кg
Technical data of the machine Working area dimension 2350 x 1250 x 60 mm. Maximum pressure 210 ton – 6 kg / cm¦ Surface pressure 160 ton – 5 kg / cm¦ Gradual pressure characteristics Electronic Vacuum pressure 28 ton – 750 milibar Vacuum capacity 100 m¦/h Vacuum motor power 3 kw – 1400 rpm (2 motors) Pressing motor characteristics 1.1 kw – 2800 rpm Resistance heating power 18 x 1000 w Air resistance 4 x 1000 w Air pressure 6 bar Total power 30 kw, 380v , 50hz Machine body dimensions 2000 (w) x 2020 (h) x 2900(l) Pressing plate dimensions 1700 (w) x 1090 (h) x 3350(l) Machine’s total weight 5 ton
Edge-banding machine EXPERT - 4600 Technical characteristics Voltage/frequency 380 V /50 Hz Amperage 22 A Width of edge band 0.4 - 3 mm Width of the worked wood pieces 10-50 mm Feeding speed 10-20 meters/min. Total power 12,4 Kw Pressure in the machine 6 atm Air consumption 240 lt/min Working height 850 mm Width 920 mm Length 4600 mm Height 1600 mm Weight 2000 Kg The sawing unit (cleans butt ends of the wood pieces before working-optional feature) 2 x 4,5 Kw 5,5 hp 60 hz Speed of sawing unit 4750-5250 dev/dk Head& End saw cutting unit 2 x 0,55Kw / 18000 Rpm Milling unit speed 2 x 0,55 Kw / 18000 Rpm Back channel opening 1,1 Kw / 2800 Rpm Polishing motor 2 x 0,18 Kw / 1400 Rpm WHY EXPERT 4600 Standard equipment All the operations taking place and all the arrangements made on the machine are shown on the electronic PLC monitor. Wide table designed for wide edge-band coils Pneumatic cutter designed to cut bands up to 3mm. Optionally the machine can be equipped by personal computer system. PLC monitor is easy to use. All the functions can be entered quickly and comfortably. Its modern style, absense of errors and easy usage make the machine a convincing equipment that meets the requirements of the customers. SCRATCHING GROUP It is a pneumatic scratching unit consisting of independent upper and lower radial scratchers.The arrangements of thin-thick pvc band from 0.4mm to 2mm are made automatically. BACK CHANNEL CUTTING UNIT t is the unit that is equipped with a jumping saw system that cuts a channel on the bottom sides of the wood pieces worked on the machine. The channel beginning and end arrangements are made on the PLC touchscreen. POLISHING GROUP It consists of two independent motors of 15000 rpm, that perform polishing work. SAFETY SYSTEMS In case when electric phases or air are not provided properly to electrical, electronic or pneumatic equipment of the machine, the safety systems start to work. Safety controls check the feeding line and the breakdown signal is given on the PLC touchscreen. Installation, technical service and personell education These procedures are performed by technical representatives of our company, the way, hotel and other costs of these services are covered by the buyer side. Working height 850 mm Width 920 mm Length 4600 mm Height 1600 mm Weight 2000 Kg
Worktable dimensions - 3000mm x 2200mm x 350mm Due to these dimensions it is possible to put a whole plate of 215cm x 280cm MDF on it, which,in its turn means that this provides a more economic spending of worked materials.The producer doesnt waste materials. There is a vacuum system installed on the table in order to fix the worked pieces, that are put on it. Spindle. HSD. 8 kW, 24000 rpm. HSD is a well-known Italian company, its spindles are one of the best in the world. Tool changer 16 automatic. Most part of the CNC Routers work with 6 or 8 tool changer. Runners. Schneiberger. German. Undisputed quality.Due to the runners we partly reduce the vibration rate of the machine. Electronic control unit. Siemens. Working software-Art Cam. A professional CNC software. Steel body of the machine and technical constructions. Sabir Makina. We have reduced the vibration rate to minimum. Because of this the work is precise and clean.This machine is in the same line with German CNC Routers. Width-3000mm Length-5000mm Height-2500mm
Pressed Sheet Metal Components, Special washers in SS and copper, CNC turning components, endless band knife blades etc..
Solid tire, solid cushion tire, press on band tire, forklift tire, material handling tyre.
Dust collector, wood working machinery, metal cutting band saw, drill press.The manufacturer and exporter for range of wood working machinery and metal cutting band saw
Wood working machines, panel saw, edge banding machine, sanding machine, drilling machine, vacuum membrane press machine.
Drill press, bench grinder, cut-off machine, magnetic drill, band saw, table saw, mini metal lathe.
Forging hammer, forging press, forging manipulator, metal chips briquetting press, metal baling press, ring rolling machine, riveting machine, horizontal metal band sawing machine.
Wood working machinery like table saw, panel saw, planer, thicknesser, scroll saw, router, sander, roller stand, dust collector, wood lathe, edge banding machine, hot press, cold press.
Cold press, vacuum membrane press, finger joint system, boring machine, four side planer, spindle moulder, wide belt sander, planer, panel saw, woodworking CNC router, band saw, overhead router, edge banding machine, profile wrapping machine, wood working machine.
Anyang forging press machinery industry co., ltd is the special manufacturer of forging hammer. It was appointed to produce the pneumatic hammer by original ministry of machine building of china. We have a history of more than 50 years in producing pneumatic forging hammer in china.Our pneumatic forging hammer was awarded the top prize by china government.We have passed ce certification. The c41 series pneumatic forging hammer is mainly used to free forging, drawing, upsetting, punching, hot shearing, forged welding, bending, torsion and foetal, standard forge. The c41 series including c41-9kg, c41-15kg, c41-25kg, c41-40kg, c41-55kg, c41-75kg, c41-150kg, c41-250kg, c41-400kg, c41-560kg, c41-750kg, c41-1000kg, c41-2000kg Wooden case
Co2 & fiber laser cutting machine, engraving & cutting cnc router, edge banding machine, side drilling machine, vacuum membrane press.
Automatic labelling machine, tape banding machine, copier, digital printing press, laser printer, business card printer, label printer.Sourcing products, transportation and shipping,afterservice,etc.
Feature: 1.Blade up & down movement by electric control. 2. digital display for saw blade inclination angle(0-45 degree). 3. wide duralumin sliding table. 4. high precision steel guide. Main technical parameter for MJ61-32TAS. Dimension of sliding table3200x435mm Gross cut capacity 3200mm Width of cut between saw blade and rip fence 1250mm Saw blade diameter 300mm(250-450mm) Height of cut (300mm) 80mm Speed of main saw spindle 4500/6000rpm Main spindle diameter 30mm Tilting saw blade 0-45-90° Main motor 5.5kw 380V , 50HZ, three phases Scoring saw blade diameter 120mm Speed of scoring saw blade 8000rpm Scoring saw diameter 20mm Scoring motor 1.1kw weight 950kgs Overall dimension 3200x2450x900mm.
X,Y working area 2000*3000mm Z working area 200mm Max. speed >30m/min Interface USB Command G code*.u00*.mmg* plt Surroundings for software windows982000/xp Powerspindle is not included 8.87KW Working voltage AC380V 50Hz Spindle power (domestic made) 4.5KW (domestic made). CNC router supplier is economical type which is with steel structure. The idle speed is up to 35m/min,engraving speed is 25m/min Adopting advanced DSP system,operated with the handle,convenient operation,desingned with more human nature Unique intelligent budget principle,fully develops the potential of the motor and lead to high processing speed,the synchronization of curves and straight lines,smoother curves. Y spindle adopts double motors to drive High strength steel tube jointin It divied into 6 vacuum table-board Professional and human nature 3D control system Optional auto tool CHANGER,and temperature control system NO. Description Parameter 1 Table size 1480¡Á3000mm 2 X,Y working area 2000¡Á3000mm 3 Z working area 200mm 4 Max. speed >30m/min 5 Interface USB 6 Command G code*.u00*.mmg* plt 7 Surroundings for software windows982000/xp 8 Powerspindle is not included 8.87KW 9 Working voltage AC380V 50Hz 10 Spindle power (domestic made) 4.5KW (domestic made) 11 Spindle rotating speed 0-24000rpm/min 12 Drive Motor Stepper
Place of Origin Shandong, China (Mainland) Brand Name HAOYU Model Number MBF-300D(H) External dimensions 5,500 x 500 x 2,100mm Max. processing width 300mm Max. processing thickness 60mm Min. processing length 400mm,no limit Speed of feeding 0-37m/min Total power 7.5kW Total weight 2,000kg Color white Quality ISO9000 Type HAOYU Profile wrapping machine. Applicable covering material: natural veneer Description; Wrapping machine designed for the gluing and application of veneer (optionally paper foil) on profiles made of particleboard, MDF, etc., using hot melt glue This machine is just used for wrapping the real wood. It can wrap various thin wood or melamine paper on kick board, set lines of door and windows, and railings of stairs Sphere of application: door architrave ,skirting lines, door and window frame lines, point angle lines, doorframes, dadoes, wall lines, friezes, mirror frames and painting frames Features: 1. The bottom wheels are all made by silicon rubber and aluminum. They are wearable and not sticky to the glue. So they can be used for a long time. 2. The electronic controlling components use famous brand products in China and they seldom breaks down. 3. The glue box and the glue plate will be heated at the same time and it can serve mass production without frequently adding glue to the machine. Technical parameters: 1) External dimensions: 5,500 x 500 x 2,100mm 2) Max. processing width: 300mm 3) Max. processing thickness: 60mm 4) Min. processing length: 400mm,no limit 5) Speed of feeding: 0-37m/min 6) Total power: 7.5kW 7) Total weight: 2,000kg.
Detailed Product Description Pvc profile wrapping machine Wrap veneer on door architrave, skirting lines, Door and window frame lines, Point angle pvc profile wrapping machine Applicable covering material: natural veneer Description; Wrapping machine designed for the gluing and application of veneer (optionally paper foil) on profiles made of particleboard, MDF, etc., using hot melt glue. This machine is just used for wrapping the real wood. It can wrap various thin wood or melamine paper on kick board, set lines of door and windows, and railings of stairs. Sphere of application: Door architrave , skirting lines, door and window frame lines, point angle lines, doorframes, dadoes, wall lines, friezes, mirror frames and painting frames Features: 1. The bottom wheels are all made by silicon rubber and aluminum. They are wearable and not sticky to the glue. So they can be used for a long time. 2. The electronic controlling components use famous brand products in China and they seldom breaks down. 3. The glue box and the glue plate will be heated at the same time and it can serve mass production without frequently adding glue to the machine. Technical parameters: 1) External dimensions: 5,500 x 500 x 2,100mm 2) Max. processing width: 300mm 3) Max. processing thickness: 60mm 4) Min. processing length: 400mm,no limit 5) Speed of feeding: 0-37m/min 6) Total power: 7.5kW 7) Total weight: 2,000kg Place of Origin Shandong, China (Mainland) Brand Name HAOYU Model Number MBF-300B(H) External dimensions 5,500 x 500 x 2,100mm Max. processing width 300mm Max. processing thickness 60mm Min. processing length 400mm,no limit Speed of feeding 0-37m/min Total power 7.5kW Total weight 2,000kg color white quality certificate ISO9000 type HAOYU
Place of origin shandong, china (mainland) Brand name haoyu Model number zdf65-6 Cnc or not cnc Condition new Max.Boring diameter 35m/m Max.Boring depth 60mm Max.Procelling pitch 1500m/mvertical Mix.Procelling pitch 130*32m/mvertical Rotating speed 2840r/min Total power 4.4kw Power 380v Pressure to adapt 0.5-0.6mpa Highly workstations 950m/m Mechanical weight 1650kg.