Bench Vice Fixed Base 4 Suppliers and Manufacturers

Tapioca pregelatinized starch offered by us has specific properties such as high viscosity, good color carrier properties and absence of foreign odors. It is often used as an adhesive in paper and corrugation industry, Sizing and finishing agent in textile and as a fluid loss control additive in oil well drilling. Applications / Advantages: 1) Our made tapioca pregelatinized starch finds much favor in adhesive industry because of high viscosity and appreciable binding capacity. 2) Tapioca pregelatinized starch is extensively used in animal feed and fish feed industry as binding agent or expanding agent. 3) It is also widely used in textile for sizing of yarns and finishing of cotton and polyester fabrics. 4) Tapioca based pregelatinized starch is used as a wet end additive to the pulp in the paper industries. 5) It is used as binder in manufacturing mosquito coil, incense stick, dhoop and cone to replace the expensive gum

DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.

Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor

Iraq Arabic Date seeds removing machine /red date seeds removing machine for 20kind fruit stone /core removing machine can removing these fruit stone or seeds : Red date/Peach and apricot / Green plum /Cherry /Hawthorn /Sandberry /Iraq date /Date de /Marinated peach kernel machine Olive /Li Zi /Nut and butter/Litchi/ Pear Technolgy features: 1. This new type of jujube core remover has strong wear resistance and is not easy to damage parts. 2. The base plate of this coconut kernel remover is made of silica gel cup, which does not damage the fruit. At the same time, it overcomes the danger of the needle seat type and the weakness of the complex operation of the tablet pressing type. 3. The equipment has the characteristics of small pore size, more pulp, clean and no residual core. 4. The bottom is equipped with a moving wheel device, which is convenient to move. At the same time, it is equipped with brake device, which is easy to fix. 5. The chassis is packaged in stainless steel, which is beautiful and generous.

Mangoes peeling-move seeds-in one machine Mango is sweet and delicious. The content of provitamin A is the highest among fruits. It is nutritious and eye protecting. This machine can peeling 1000pcs mangoes per hour, tall and short, thick and thin mangoes, because the machine has an adaptive function (that is, it can automatically cut mangoes as low as they are high and as thin as they are thick). During program control plus remote control operation, click the touch screen, set parameters, put mangoes into the fruit base, and the machine will automatically complete fruit feeding - fruit fixing - peeling - seeds discharging separation. It is the key equipment for industrialized processing of dried mango, slice, preserved mango, diced mango, strip, diced mango, jam, juice, powder, canned mango, quick-frozen diced mango and fresh cut mango. Paramters: Capacity 1000pcs/hour Thickness: 1-3mm can adjustable Height of fruit 40-120mm Die of fruit 40-100mm Power 0.6kW 220V-50Hz Weight 320kg Dimension 1500 800 1800mm

Fresh corn cleaning production line ,clean vegetable cleaning and air drying assembly production line, prefabricated vegetable processing equipment,different capacity customized . Machine features : 1.Universal adjustable nozzle, uniform spraying, stable without unhook, 360degree adjustable cleaning. 2.Circulating water tank, filter impurities in the product cleaning process to prevent clogging of the nozzle. 3.Automatic control, simple operation 4. Vortex air pump, strong wind, anti-seismic base, wear resistant. 5.Motor mute energy saving. Corn bubble cleaner production line also can process : Leaf vegetables, root vegetables, fruits, Chinese herbs, edible mushroom, aquatic products and seafood . Good business investing low cost high profit!

JH temperable mirror (SUPMIROR) is made with sputtering technique on starphire premium glass, not as mirror based on silver, JH SUPMIROR can be toughened and exposed in damp environment, like float glass . JH temperable mirror Advantages SUPMIROR offer more solutions for building faÃ?§ade and interior decoration. SUPMIROR without paint content, more environment friendly SUPMIROR is easy for processing with tempering, laminating, curving and acid etching. JH temperable mirror Application SUPMIROR is suitable for many range of applications, including building inside and outside, to transform and decorate rooms, to increase the feeling of space.   Splashback SUPMIROR splashback is the perfect choice to any kitchen, bathroom and laundry design, with various colour choice, easy to clean, bring more space in modern life. Interior partitions and doors After toughened or laminated, SUPMIROR is compatible with modern fixing systems Baths, showers partitions ,doors SUPMIROR is almost immune to oxidation, suitable for fitting areas subject to high levels of moisture One-way mirrors SUPMIROR includes one-way mirror products, apprears reflectctive on one side and transparents at the others. When fitted in a low-light room, allows you to observe the interior of a room more clearly without being seen. From the lighter side of the room, the wall looks just like mirror. Double sides mirror SUPMIROR includes double side mirror products, which is high reflection on both side, can be used on door

JH temperable mirror (SUPMIROR) is made with sputtering technique on starphire premium glass, not as mirror based on silver ,JH SUPMIROR can be toughened and exposed in damp environment, like float glass . JH temperable mirror Advantages �?�??�?�?�?�¬SUPMIROR offer more solutions for building facade and interior decoration . �?�??�?�?�?�¬SUPMIROR without paint content, more environment friendly �?�??�?�?�?�¬SUPMIROR is easy for processing with tempering ,laminating ,curving and acid etching . JH temperable mirror Application SUPMIROR is suitable for many range of applications, including building inside and outside , to transform and decorate rooms, to increase the feeling of space. Splashback SUPMIROR splashback is the perfect choice to any kitchen, bathroom and laundry design , with various colour choice ,easy to clean, bring more space in modern life . Interior partitions and doors After toughened or laminated, SUPMIROR is compatible with modern fixing systems Baths, showers partitions ,doors SUPMIROR is almost immune to oxidation, suitable for fitting areas subject to high levels of moisture One-way mirrors SUPMIROR includes one-way mirror products, apprears reflectctive on one side and transparents at the others. When fitted in a low-light room, allows you to observe the interior of a room more clearly without being seen. From the lighter side of the room, the wall looks just like mirror. Double sides mirror SUPMIROR includes double side mirror products, which is high reflection on both side,can be used on interior decoration.

Specification : Size : 2.5 & 2.2 or by request Material : 100% coconut charcoal Ash content : max 2.5% Ash color : white Moisture : 4-5% Fix carbon : min 80% Volatile matter : max 15% Calori : > 7500Kkal Price FOB include packing inner,smallbox and masterbox.

* Ash Content: 3% * Moisture: 2% * Fixed Carbon: 91.3% * Calorific Value: 8000 kcal/kg * Burning Time: 4-5hours

Burning Time: 5 - 7 hours Moisture: 6-8 % Fixed Carbon: 85% Calorific Value: 6500 to 7000 Kcal/kg Ash Content: 1.5-2 % Volatile Matter: 12.5 to 30% Sizes: 20mm to 100mm, 30mm to 200mm (based on your request) Shape: Lump / Briquettes / block Foreign Matter: 1 % made with physical methods, 100% pure hardwood No Chemical contents ph value :7-9 Our charcoal can be use for both open and closed fires. smokeless coal for domestic use. recommended room warmer& barbeque Shape: lump No traces of soil or other elements. Long life burning burn without any smoke or fume during the initial ignition and during burning duration.

Burning Time: 5 - 7 hours Moisture: 6-8 % Fixed Carbon: 85% Calorific Value: 6500 to 7000 Kcal/kg Ash Content: 1.5-2 % Volatile Matter: 12.5 to 30% Sizes: 20mm to 100mm, 30mm to 200mm (based on your request) Shape: Lump / Briquettes / block Foreign Matter: 1 % made with physical methods, 100% pure hardwood No Chemical contents ph value :7-9 Our charcoal can be use for both open and closed fires. smokeless coal for domestic use. recommended room warmer& barbeque Shape: lump No traces of soil or other elements. Long life burning burn without any smoke or fume during the initial ignition and during burning duration.

Burning Time: 5 - 7 hours Moisture: 6-8 % Fixed Carbon: 85% Calorific Value: 6500 to 7000 Kcal/kg Ash Content: 1.5-2 % Volatile Matter: 12.5 to 30% Sizes: 20mm to 100mm, 30mm to 200mm (based on your request) Shape: Lump / Briquettes / block Foreign Matter: 1 % made with physical methods, 100% pure hardwood No Chemical contents ph value :7-9 Our charcoal can be use for both open and closed fires. smokeless coal for domestic use. recommended room warmer& barbeque Shape: lump No traces of soil or other elements. Long life burning burn without any smoke or fume during the initial ignition and during burning duration.

Burning Time: 5 - 7 hours Moisture: 6-8 % Fixed Carbon: 85% Calorific Value: 6500 to 7000 Kcal/kg Ash Content: 1.5-2 % Volatile Matter: 12.5 to 30% Sizes: 20mm to 100mm, 30mm to 200mm (based on your request) Shape: Lump / Briquettes / block Foreign Matter: 1 % made with physical methods, 100% pure hardwood No Chemical contents ph value :7-9 Our charcoal can be use for both open and closed fires. smokeless coal for domestic use. recommended room warmer& barbeque Shape: lump No traces of soil or other elements. Long life burning burn without any smoke or fume during the initial ignition and during burning duration.

Burning Time: 5 - 7 hours Moisture: 6-8 % Fixed Carbon: 85% Calorific Value: 6500 to 7000 Kcal/kg Ash Content: 1.5-2 % Volatile Matter: 12.5 to 30% Sizes: 20mm to 100mm, 30mm to 200mm (based on your request) Shape: Lump / Briquettes / block Foreign Matter: 1 % made with physical methods, 100% pure hardwood No Chemical contents ph value :7-9 Our charcoal can be use for both open and closed fires. smokeless coal for domestic use. recommended room warmer& barbeque Shape: lump No traces of soil or other elements. Long life burning burn without any smoke or fume during the initial ignition and during burning duration.

Burning Time: 5 - 7 hours Moisture: 6-8 % Fixed Carbon: 85% Calorific Value: 6500 to 7000 Kcal/kg Ash Content: 1.5-2 % Volatile Matter: 12.5 to 30% Sizes: 20mm to 100mm, 30mm to 200mm (based on your request) Shape: Lump / Briquettes / block Foreign Matter: 1 % made with physical methods, 100% pure hardwood No Chemical contents ph value :7-9 Our charcoal can be use for both open and closed fires. smokeless coal for domestic use. recommended room warmer& barbeque Shape: lump No traces of soil or other elements. Long life burning burn without any smoke or fume during the initial ignition and during burning duration.

Indonesia Wood Charcoal exporter **** Raw material : High Grade Mix Hardwood ***** Usage : BBQ - Restaurant - Grill ***** Food Grade ***** No Spark - Less Smoke - Odorless ***** Shape: Lump Shape 5 cm up ***** Ash content: 3% ***** Moisture: MC under 10% ***** Fixed carbon: approx 70% ***** Calorific value: 7500-8500 kcal/kg ***** Burning time : 4 hours up ***** Quick Lighting ***** Packing In PP Woven Bag in 20 kg / bag or by demand ***** yellow bags with your logo printed on it ***** Loading in 40ft = approx 18 tons up ***** Delivery 2 weeks ***** Price usd 260 / ton ( Fix) : FOB Tanjung Priok Port , Jakarta , Indonesia Price to Middle East main port usd 470/ton and to Australia main port usd 490/ton ***** others sea port available ***** MENTIONED IN B/L MUST BE WOOD CHARCOAL HS code 440290 >>> NO TRICKY COMMODITY SUCH WOODEN PRODUCTS , WOOD CHIPS SO EVER Payment term by Bank transfer only and to be discussed with buyers

We are a West African company into trade and exports of hardwood charcoal in large quantities from West Africa. We are interested in supplying this prestigious company quality hardwood charcoal for your various uses. OUR CHARCOAL IGNITES EASILY,BURNS CLEAN,LONG BURNING TIME (3-6 HRS) WITH INTENSE HEAT Hard Wood Charcoal Origin: Nigeria Fixed carbon: 76-80% minimum Volatile matter: 8% maximum Burning rate: 7400kcal/kg Minmum Ash content: 5% maximum Moisture: 4% maximum Burning Time: 3-6Hrs Fraction - 60-120mm Packaging:2kg,4kg, 5kg,10kg Paper Bags OR 25KG, 35kg PP BAGS OR According to Buyers Request