Product Description Additives Antioxidant in hydro processed fuel mg/l min 17 max 24 Antioxidant non hydro processed fuel mg/l max 24 Static dissipater first doping ASA- 3 mg/l max 1 Stadis 450 mg/l max 3 Combustion properties Specific energy, net mi/kg min 18.4 D 4808 Smoke point mm min 19 D 1322 Lumininomitter number min 45 D 1740 Naphtales % vol max 3 D 1840 Propriety unit min - max result test - ip method ASTM Composition. Available products: JET A1/JP54, CRUDE OIL, BLCO, REBCO, SLCO, D2, D6, BIODIESEL, EN590, DIESEL 10PPM & 50PPM, BITUMEN, MAZUT M100, Copper. Safe procedure and long-term cooperation - that is our motto.
Item Test Condition Test Method Value Unit MFR 190 C/2.16kg ASTM D-1238 20 g/10min Density --- ASTM D-792 0.954 g/cm3 Tensile strength at yiled --- ASTM D-638 28 MPa Elongation at break --- ASTM D-638 250 % Impact tensile strength --- ASTM D-1822 42 kJ/m2 ESCR ASTM D-1693 3 --- VACIT --- ASTM D-1525 127 C
Item Test Condition Test Method Value Unit MFR 190C/2.16kg ASTM D-1238 20 g/10min Density --- ASTM D-792 0.954 g/cm3 Tensile strength at yiled --- ASTM D-638 28 MPa Elongation at break --- ASTM D-638 250 % Impact tensile strength --- ASTM D-1822 42 kJ/m2 ESCR ASTM D-1693 3 --- VACIT --- ASTM D-1525 127 C
Material SD390/490/400,B500B/GR460B,HRB400/500,ASTM A615 GR40/60 Standard BS4449,JIS,ASTM/A615 Length 6m,12m Application Widely used in construction industry for reinforcing concrete(Express way; office building, Bridge etc) Transportation By sea(20' 40' container)
Material ASTM A53, A106, A210, A252, A333 Grade Q195 SS330,ST37,ST42 Q235 SS400,S235JR Q345 S355JR,SS500,ST52
Item Test condition Test Method Value Unit Density ISO 1183 0.944-0.955 g/cm3 MFR 190 C/2.16kg ISO 1133 0.03-0.07 g/10min Tensile strength at yield ISO 527-2 22 MPa Elongation at break ISO 527-2 >350 % ESCR F50,50 C,100% ASTM D-1693A 1000 h VICAT ASTM D-1525 126 C
Item Test condition Test Method Value Unit Density ISO 1183 0.944-0.955 g/cm3 MFR 190 C/2.16kg ISO 1133 0.03-0.07 g/10min Tensile strength at yield ISO 527-2 22 MPa Elongation at break ISO 527-2 >350 % ESCR F50,50 C,100% ASTM D-1693A 1000 h VICAT ASTM D-1525 126 C
JIS G3302, JIS G3313, ASTM A653, GB/T2518-88, GB11253-89, BS, ect. 1.Structural use ,roofing, commercial use, housing 2.Container plate 0.13-1.00 mm 600-1250 mm
Item Test condition Test Method Value Unit Density ISO 1183 0.944-0.955 g/cm3 MFR 190 C/2.16kg ISO 1133 0.03-0.07 g/10min Tensile strength at yield ISO 527-2 22 MPa Elongation at break ISO 527-2 >350 % ESCR F50,50 C,100% ASTM D-1693A 1000 h VICAT ASTM D-1525 126 C For extrusion packaging film, rope, woven bags, fishing nets, water pipes; injection of low-end commodity and housing, non-bearing load components, plastic box, turnover box; extrusion blow molding containers, hollow products, bottles.
Item Test condition Test Method Value Unit Density ISO 1183 0.944-0.955 g/cm3 MFR 190 C/2.16kg ISO 1133 0.03-0.07 g/10min Tensile strength at yield ISO 527-2 22 MPa Elongation at break ISO 527-2 >350 % ESCR F50,50 C,100% ASTM D-1693A 1000 h VICAT ASTM D-1525 126 C For extrusion packaging film, rope, woven bags, fishing nets, water pipes; injection of low-end commodity and housing, non-bearing load components, plastic box, turnover box; extrusion blow molding containers, hollow products, bottles.
Particle Size : 35 ASTM Colour : Light Brown Moisture : 10% max Total Ash : 7% max Acid insoluble ash : 2% max Uses of Cinnamon Sweet Cinnamon could be used to spice up your cooking and decorate your favorite dish. Taste the difference of natural Cinnamon Tea or Coffee by stirring your cup with a Cinnamon stick. Make your own Christmas ornaments with Cinnamon sticks. A few sticks of Cinnamon around your flowerpot will not only look ,but also smell great. Inset a Cinnamon Stick in to a bottle of Vodka and taste the refreshing natural taste of Cinnamon Vodka. Insert a Cinnamon Stick into the Cleaning Bottle and clean your pantry or Kitchen for the natural fragrance to fill your room
Particle Size : 35 ASTM Colour : Light Brown Moisture : 10% max Total Ash : 7% max Acid insoluble ash : 2% max Uses of Cinnamon Sweet Cinnamon could be used to spice up your cooking and decorate your favorite dish. Taste the difference of natural Cinnamon Tea or Coffee by stirring your cup with a Cinnamon stick. Make your own Christmas ornaments with Cinnamon sticks. A few sticks of Cinnamon around your flowerpot will not only look ,but also smell great. Inset a Cinnamon Stick in to a bottle of Vodka and taste the refreshing natural taste of Cinnamon Vodka. Insert a Cinnamon Stick into the Cleaning Bottle and clean your pantry or Kitchen for the natural fragrance to fill your room
Metal tin is mainly used in the manufacture of alloys. Tin and sulfur compounds - tin sulfide, which is similar in color to gold, is commonly used as a gold pigment. Tin's modern application is as a solder for the electronics industry. Used in various purities and alloys (often with lead or indium), tin solders have a low melting point, which makes them suitable for bonding materials. Standard ASTM B29-03, BS EN 12659:1999, GB/T 469 -2005 , Content Pb â?¥ 99.99 % Density 11.34 g / cm 2 Color Bluish Weight 35 kgs / lump, 55 kgs / lump Dimension 21" x 4" x 2.5" Package Standard Sea-worthy package, fixed by belt per ton Shape Rectangular Lump Application lead-acid storage batteries Ammunition, cable sheathing, and building construction materials counterweights, battery clamps cast products such as: bearings, ballast, gaskets, type metal, terne plate, and foil Container Size 20Gp - 2.352(width) *2.385 ( Height ) * 5.90 ( Inside length ) Meter 40Gp - 2.352(width) *2.385 ( Height ) * 11.8 ( Inside length ) Meter 40HQ - 2.352(width) *2.69 ( Width ) * 5.90 ( Inside length ) Meter
Quartz a crystal form of silica is found in a massive forming hill. Quartz is a mineral that's easily available from the crust of earth. And yet, it's quite valuable for its vast usage. Applications: - GLASS CERAMIC ABRASIVE PAINT SODIUM SILICATE FERRO SILICON REFRACTORY Millimeters Scale ASTM Scale 0.08-0.15mm 100-200 Mesh 0.1-0.2mm 70-120 Mesh 0.2-0.4mm 40-70 Mesh 0.3-0.6mm 26-40 Mesh 0.6-0.12mm 16-26 Mesh 1.2-2.5mm 8-16 Mesh 2.5-4.0mm 6-8 Mesh 4.0-6.0mm 4-6 Mesh 6.0-8.0mm 3-5 Mesh 38 Microns 400 & 200 Mesh Index Compound Unit Result 1. Silica - (SiO2) % 98.11 2. Alumina - (AI2O3) % 00.49 3. Iron - (Fe2O3) % 00.03 4. Titanium - (TiO2) % 00.03 5. Calcium - (Cao) % 00.64 6. Magnesium - (MgO) % 00.07 7. Soda - (Na2O) % 00.09 8. Potash - (K2O) % 00.03 9. Loss on Ignition - (LOI) % 00.20
Non-Woven Fabric, Non-woven fabrics Disposable Mask & Respirator Products 3Ply Mask EN14683:2019 Type I/Type II/Type IIR ASTM F2100-19 Level 1/Level 2 China YY/T0969-2013 YY 0469-2011 3Ply Civil Mask TGDBX 025-2020 KIDSGB/T 38880-2020 KIDSTGDMDMA 0005-2020 Vertical Mask Non-Medical Mask EN149 FFP2 EN149 FFP3 GB2626 KN95 NIOSH N95 FDA N95 Medical Mask EN14683 2019 Type IIR ASTM F2100-19 Level 3
Nitrile Examination Gloves Comfortable, super soft flexible powder free nitrile gloves provide added safety in many applications. Designed with a special nitrile formulation they feel and fit like latex and allow full range of motion and excellent flexibility to minimize stress and fatigue. They do not contain natural rubber latex and are an excellent alternative for those suffering from Type I allergies. Features * 100% latex free-made from durable, puncture resistant, protein and powder-free nitrile, eliminates the Type I allergic reaction associated with natural rubber latex * Highly elastic and super soft * Rolled rim to facilitate easy donning * Designed to give a natural rubber-like feel * Textured in finger tips for enhanced grip in all situations *Food safe, suitable for handling fatty foods incl. cooking, olive and cod liver oil (Special Product) * Protects against a wide variety of chemicals * AQL 1.5, 2.5,4.0 Available Quality standards * Complies with EN 455 and EN 374 * Complies with ASTM D6319 (USA Related Product)
US$ 5.258 - 6.585 / Piece 50000 Pieces Minimum Order 5 - 15 days Lead Time Quantity (Pieces): FOB Price (USD): 50000 to 499999 $6.585 500000 to 999999 $6.186 1000000 to 49999999 $5.955 50000000 and more $5.258 Sample Price (USD):$51.8 Product Details Model Number : WinHealth Protective Gown 001-#8815 Brand Name : WinHealth (Future) Origin : China (mainland) Specifications/Special Features: Key Specifications/Special Features: 1. Material: 55gsm SMS, with white cuff; 2. 1PC/bag, 60bags/carton; 3. Carton size: 60x40x48mm 4. Waterproof coverall laminated with PE and sealed with waterproof tape in joint aread. Shipping Information FOB Port: Shanghai Dimensions per Unit : 30 X 25 X 15 Centimeters Units per Export Carton: 30 Lead Time : 5 - 15 days Export Carton Weight : 8.5 Kilograms Weight per Unit : 0.25 Kilograms Export Carton Dimensions L/W/H: 60 X 40 X 40 Centimeters Main Export Markets Asia Australasia Central/South America Eastern Europe Mid East/Africa North America Western Europe Payment Details: Payment Method : Telegraphic Transfer in Advance (Advance TT, T/T) Primary Competitive Advantages Origin Distributorships Offered Experienced Staff Guarantee/Warranty International Approvals Packaging Price Product Features Product Performance Prompt Delivery Quality Approvals Reputation Service Small Orders Accepted CE FDA Certificate ASTM PB LEVEL4
Product Name Precision Steel Pipe Standard DIN2391 EN10305-1 ASTMA179 ASTM A192 ASTM A519 Material SAE1010,SAE1020,#10,#20,#45,304,316 Outer diameter 8MM-50MM Wall thickness 0.5-50.0MM Length fixed(3-12m) or customized Technology High precision Cold drawn/ Cold rolled Heat treatment BK/BKS/NBK Advantages Short delivery time Quality assurance Competitive price
Materal stainless steel ASTM BS EN JIS Grade 201 1.4372 SUS 201 Thickness 1.0mm Width 1220mm Length 800mm Surface 2B
430 Stainless Steel Strip Specifications Grade: 430 Standard: ASTM/EN/JIS Thickness: 0.03mm-5.0 mm Width: 8.5mm-600 mm Length: coil type or it can be produced as customer requirements Surface Finish: NO.1, 2B, 2H(Rerolled Bright), BA, No.4, 8K (Mirror), HL (Hairline), Polishing Bright, etc Edge: Mill Edge, Slit Edge, Deburred Edge, Round Edge, V Type Edge 430 Stainless Steel Strip Introductions 430 stainless steel strip is a general purpose stainless steel with good corrosion resistance. It has better thermal conductivity than austenite grade stainless steel strip, a smaller thermal expansion coefficient than austenite strip, heat fatigue resistance. Due to addition of stabilizing element titanium, it has good mechanical properties of welding. Because of its chromium content, it is also called 18/0 or 18-0. Compared with 18/8 and 18/10, it contains slightly less chromium, and the hardness is correspondingly lower. 430 Stainless Steel Strip Applications 430 stainless steel strip is widely used for building decoration, fuel heating parts, hot water supply systems, household appliances, banding systems, home appliance parts and hareware. 430 Stainless Steel Strip Chemical Composition The chemical components of grade 430 stainless steel strip is summarized in the following table: Grade Standard C Si Mn P S Cr Ni Mo 430 ASTM A240 0.12 0.75 1.00 0.040 0.030 16.00-18.00 0.75
