Color: Natural. Origin: Vietnam. Thickness (mm): 3-5. Diameter (mm): 14/16/18/20/24/27/32/38/45/50. Process: Cut in proper length, steam at 1000 degree for 20mins, clean well, dry at 150 degree until the moisture reach 15%, sort into bundles. Packing: 50pcs/bundle. Price FOB HCMC Port: Full Container Load Payment & delivery: L/C at sight or T/T 30% in advance, negotiable.
BAMBOO POLE Color: Natural. Origin: Vietnam. Thickness (mm): 3-5. Diameter (mm): 14/16/18/20/24/27/32/38/45/50. Process: Cut in proper length, steam at 1000 degree for 20mins, clean well, dry at 150 degree until the moisture reach 15%, sort into bundles. Packing: 50pcs/bundle.
BAMBOO POLE Color: Natural. Origin: Vietnam. Thickness (mm): 3-5. Diameter (mm): 14/16/18/20/24/27/32/38/45/50. Process: Cut in proper length, steam at 1000 degree for 20mins, clean well, dry at 150 degree until the moisture reach 15%, sort into bundles. Packing: 50pcs/bundle.
*Our quality specifications are as below: - Name: Dried Sea Grapes - Preservation Process: Salted - Moisture: 16% - Shelf-life: 6 months - Use: When soaking in water in 3-5 minutes, salted sea grapes will burst into fresh seaweed. 1kg salted sea grapes come to 4kgs fresh Sea Grapes - Storage: Avoiding directly sunlight and high temperature - Packing: As customers' require - Price: Negotiation - Payment term: T/T 40% in advance, 60% on scan bill or L/C at sight 100% - Delivery time: 7-10 days
Green Coffee Beans Moisture: 13% Max Admixture: 0,5-1% Max Black and Broken Beans: 2%- 5% Max Above Screen 13, 16 18: 90%. Crop Year: 2013 Packaging Detail: 50Kg or 60 Kg in single or double Jute Bags/,19 Metric Tons per 20â?? Container Delivery Detail: 15-20 days from the date of confirmation. Specifications Moisture: 13% Max Admixture: 0,5-1% Max Black and Broken Beans: 2%- 5% Max Above Screen 13, 16 18: 90%
Specification Robusta Coffee - R2 S13 On sieve screen 13 - 90% min Moisture - 13% max Foreign matter - 0.5% max Black & Broken - 5% max Foreign beans - 0.1% Robusta Coffee R1 S16 On sieve screen 16 90% min Moisture : 12.5% max Foreign matter : 0.5% max Black & Broken : 2% max Foreign beans: 0.1% Robusta Coffee R1 S18 On sieve screen 18: 90% min Moisture: 12.5% max Foreign matter : 0.5% max Black & Broken 2% max Foreign beans: 0.1% Packing - In new jute bag : 60kgs/bag MOQ - 19.2 ton/cont 20
item value Type - Betel Nut Cultivation Type - Organic Processing Type - Baked Style - Dried Packaging - 50-60kg/bag Certification - Phytosanitary Grade - 80%- 85% Use -Human Consumption Place of Origin - Thailand Nakhon Si Thammarat Brand Name - Hasan & Bono Model Number - HB-16 Product name - Whole Betel Nut Other name - Supari Country of origin - Thailand Packing -50-60kgs/jute Bag Color - Natural Color Quality - Well-dried Dried - Sun IMPURITY - 1% Max Moisture - 5 % Max Payment - T/T
5 Oz, 7 Oz, 9 Oz, 10 Oz, 12 Oz, 16 Oz, 20 Oz and 24 Oz Disposable PP Clear Ripple Cup is Recyclable, Non-Toxic, and Safe to Drink
Dried mango is processed by modern technology, completely fried through oil. Mango after drying retains its natural flavor and color, minimizes nutrient loss, and increases storage time. Ductility, sweet and sour taste, very aromatic, very easy to eat . Expiry date: 12 months from manufacturing date. Contant sugar: 5% max Moisture : 15-16% Ingredient: Mango pulp (92.9%), White contain sugar (5%max) , acidity regulator (E330).
Ring Type Joint Flange
A ring joint face design has a grooved slot in which a metal ring gasket is inserted to creating a seal with mating flange. The metal ring is available in oval or octagonal shape. Most common material for ring joint gasket is 316 stainless steel which makes it ideal for corrosive applications A ring joint face design has a grooved slot in which a metal ring gasket is inserted to creating a seal with mating flange. The metal ring is available in oval or octagonal shape. Most common material for ring joint gasket is 316 stainless steel which makes it ideal for corrosive applications
We are supplier of Reinforcement Bars. can supply REBARS as per below: -Size: 6mm to 50 mm -Length: 6 meters up to 16 meters -Packing: Once folded bundles available. hese corrugated steel bars are used as tension devices in the construction of concrete slabs and walls, as well as decorative/ornamental grille work. When used in concrete constructions, these help to strengthen and hold concrete when it is compressed, and come in a wide variety of sizes to fit various building construction needs. At ARC. AVAILABLE IN 3/8 (10mm), 5/8 (16mm), (20mm), (12mm), 1 (25mm) and 1 (32mm)
Pale yellow liquid at room temperature characteristic odor and taste or nearly odorless, free from rancidity or any objectionable odor and taste. Each batch of materials shall undergo strict sampling,inspection and screening for guaranteeing the affluent oil production and the excellent oil fragrance. Groundnut OIL Taste Neutral Impurities Negative Free Fatty Acid ( % ) max 0,10 Moisture ( % ) max 0,05 Peroxide Value ( meq O2/ kg ) max 5 Specific gravity at 20 degr C 0,91 - 0,93 Iodine value ( g / 100 g ) 82 - 110 Colour Lovibond 5 1/4 " Red max 2,5 Colour Lovibond 5 1/4 " Yellow max 25 C 12:0 C 14:0 (Myristic Acid) C 16:0 ( Palmitic Acid ) 6 - 14 C16:1 (Palmitoleic Acid) C 18:0 ( Stearic Acid ) 1 - 5 C 18:1 ( Oleic Acid ) 35 - 72 C 18:2 ( Linoleic Acid ) 13 - 44 C 18:3 ( Linolenic Acid )
Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor
DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
Steel billets result from the second stage of the steel production process. They are hot-rolled or forged from an ingot or strand cast. steel billets from 45 x 45 mm to 150x150 mm, and round steel billets from 120 mm to 270 mm in diameter. Length : Specifiable up to 12 m Quality : In various internationally well known standards including afnor (nf), aisi, astm, bs, din, euronorm, gost, jis, iso, sae, si, ts, uni, etc. (eg. Astm a 615 gr 40 or 60, bst 420 s, din 488, st 37.2 din 17100, nfa 35015 and 16, bs 4449 (gr 250 or 460), jis g 3112 (sd 30, 35, 40), si 739 s 400, si 739 s 400 w, feb 44 k, 3 sp/ps or 5 sp/ps gost 380 88, 35 gs or 25 g2s, gost 5781-82, etc) Other grades available according to customer's request
Product: Flanges Brand: Renaissance Pipe Fitting Inc. Sizes: Refer to the specification Condition: New Rating:4.6, based on 12 reviews price: Start fro 10 USD SME - A 182 / 240, SA 182 / 240 Flanges, Aluminium Flanges, Carbon Steel Flanges, Nickel Alloy Flanges, supplier. RFP India is a renowned manufacturer and supplier of flanges in the steel market internationally. A flange is a cast ring or a forged which is intended to design and join a range of pipe sections or predominantly to any other tools that call for a linking point in the middle. We also offer a couple of fundamental kinds of flanges that have an enormous requirement such as Stainless Steel Flanges, Carbon Steel Flanges, and Alloy Steel flanges. Meanwhile, as the name implies, Flanges are manufactured from high-quality stainless steel, a material that is commonly used for making such types of flanges. We provide one of the widest ranges of standardized and customized flanges for to meet the dissimilar needs of the clients.
Apple washing peeling remove seeds half cutting in-one-machine, also can process pear and other same fruits and vegetables. Parameters : Number of valve openings: determined by the user Production capacity: 45-50 pcs/min, 16 plugs (one circle) Peeling thickness: 1.1-1.3 mm adjustable Suitable fruit diameter: 65-120 mm remove seeds diameter: 22 mm (can be determined according to user requirements) Peel removal rate: 95 % or more . (normal apples, non rotten fruits, dry scars, irregular fruits.) Excluding both ends. Total power of equipment: 2.25 kw Equipment specifications: host; 1800 * 1050 * 2100, auxiliary equipment 3300 * 1200 * 900 Equipment weight : 850 kg Equipment gas consumption: 0.65 m3/min Advanced technology : small area,efficient,sanitary,easy operate and clean,saving labor costs . Apple process machine apple machinery fruit machinery ,pear /apple/round fruits/vegetable peeler, fruit process machine ,apple/pear peeling machinery ,apple /pear seeds remove machine/machinery Canned apple /pear /fruits making machine applesauce making machine applesauce process machinery /equipment, apple ring making machine ,apple production line apple plant ,apple/pear half cutting machinery
Origin: Israel Specification: 50 ton of clean Pa 66 fiber scrap in bales. 20 ton with long fibers. 30-ton with small cut of fibers. Black is 5-6 ton. All the other is white and natural The long fiber is 16-1 ton , per container, The cut fibers are only 13-14 ton per container.
LDPE Film A- grade (LGB) Plastic Scrap Material For Sales MATERIAL : LDPE Film A- grade (LGB) CATEGORY : LDPE TYPE : film GRADE : A- grade (LGB) SPECIFICATION : LDPE film A- grade from Long Beach,USA . 5-10 loads available ORIGIN : US LOADING WEIGHT : 16-17 Tons FAS (USD/Ton): 600-800
