1. ADVANTAGES OF DOWNHOLE MOTOR Increased rate of penetration. Better hole deviation control. Reduction in drill string failure rate. Reduction in wear and tear of the swivel, Kelly, and rotary drives. Reduction in fuel cost, since compared to rotary drilling, less energy is required to power a downhole motor. 2. CONSTITUTION Downhole motors differ in size and performance characteristics, but they share the same basic components as follows (Fig.1) : Crossover Sub Safety Catch Sub Power Section Coupling Assembly Bearing Assembly
The characteristics of the IADC 547 tricone drill bit size:8 1/2 IADC:547 WOB:0.35-1.05 RPM:110-40 Bearing:rubber sealed bearing Applicable formations:medium soft with low compressive strength and harder abrasive stringers,such as hard shale,hard gypsolyte,soft limestone,sandstone and dolomite with stringers,etc Hebei Crossing Drill Bit Manufacture Co.,Ltd is a professional supplier of drilling tools.With years of study and refining of the introduced technology,we have succeeded in the field of products research with proprietary intellectual property rights.Also, we have made major breakthrough in the lines of analogue simulation in bottom-hole fiow field,profile optimization,design of inserts arrangement and low torque,material and manufacturing t echniques etc.As a result,our products own better characters of service and ranges of application.Mainly used for oil and gas,mining,geothermal,construction and so on. The products of our company have achieved industrialization and serialzation.Besides our company has always laying importance on the technical exchanges and cooperation with the counterparts both at home and abroad.Our products have been sole all over the world,including the United States,England,Canada,Brazil,Russia,Italy,Iran,Saudi,Arabia,Korea,India,and Poland and so on. The main products Tricone bit(TCI and MT bit) PDC bit(steel body and matrix body) Reamer bit(HDD rock reamer bit,barrel reamer and fly cutter,replaceable cutter rock reamer) Drag bit,Core bit,Three and four wings PDC bit Accessories(Nozzles,bit breaker,swivel,chain wrench etc.)
1) Drill pipe OD: 2 7/8", 3 1/2", 4", 4 1/2", 5" 5-1/2" 2) Steel Grade: E75, G105, S135,X95 3) Type of end finish: EU-external upset, IEU-internal & external upset 4) All drill rod are made according to API 5D standard 5) We can provide in many conditions, with or without hard banding (Arnco100XT, Arnco300XT, tungsten
Product Description: 1. Bit Breakers The Bit Breakers are suitable to make up or break out the drilling bit during the oil well drilling and repairing operations. The Users should be chosen the bit breaker according to the size and model of the drilling bit. Feature:Improve support and retention Advantage:Manage the magnitude cutter loading and bit torque Benefit:Improved bit durability and directional responsiveness Advantage:Higher nozzle counts and/or fixed ports to best serve cleaning,cooling and cuttings evacuation requirements with available hydraulic flows.Allow for higher flow rates with minimal increase in pump pressure. 2. Detailed introduction to Bit breaker 1) Bit breaker is mainly used to screw on or off a rock bit to the bottom of drill string. 2) It can also prevent the rock bit from dropping into well hole. 3) The price of it is cheap and the use of it is safety and reliable. 4) It is easy to operate. First, the bit breaker is placed on well hole and then put the rock bit onto it. Turn it to screw on or off the bit by turnplate.
1.Cutting structure this type TCI tricone bits: The durability of premium tungsten carbide insert is improved with new formulas and new techniques for insert bit. 2.Gauge structure this type TCI tricone bits: Multiple gauge protection with gauge trimmers on the heel of cone, tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capability and bearing life. 3.Bearing structure of this type TCI tricone bits: High precision bearing with two thrust faces. Ball lock the cone. Hardfaced head bearing surface. Cone bearing inlaid with friction-reducing alloy and then silver-plated. Abrasion resistance and seizure resistance of the bearing are improved. 4.Seal and Lubrication of this type TCI tricone bits: Premium Oring, optimal seal compression and curved seal structure can enhance the seal performance. The pressure compensator system and advanced grease can greatly increase the lubricating reliability . 5.Product Application this type TCI tricone bits: It can receive high WOB in the conventional drilling. It is suitable for various formations by matching cutting structure with different tooth shape, tooth density and tooth exposure height. 6.Advantage: 1. High-strength, high flexibility, high temperature and high wear resistance. 2. High-precision metal seal. 3. Locking roller ball, to adapt to high-speed. 4. The use of high strength high toughness carbide teeth, 5. Hours in the rotary cone bit with the impact, crushing and shearing the role of broken rock. 6. Cone bit to adapt to the soft, medium and hard of various strata. 7. Reasonable price and long working life.
1.Cutting structure this type TCI tricone bits: The durability of premium tungsten carbide insert is improved with new formulas and new techniques for insert bit. 2.Gauge structure this type TCI tricone bits: Multiple gauge protection with gauge trimmers on the heel of cone, tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capability and bearing life. 3.Bearing structure of this type TCI tricone bits: High precision bearing with two thrust faces. Ball lock the cone. Hardfaced head bearing surface. Cone bearing inlaid with friction-reducing alloy and then silver-plated. Abrasion resistance and seizure resistance of the bearing are improved. 4.Seal and Lubrication of this type TCI tricone bits: Premium Oring, optimal seal compression and curved seal structure can enhance the seal performance. The pressure compensator system and advanced grease can greatly increase the lubricating reliability . 5.Product Application this type TCI tricone bits: It can receive high WOB in the conventional drilling. It is suitable for various formations by matching cutting structure with different tooth shape, tooth density and tooth exposure height. 6.Advantage: 1. High-strength, high flexibility, high temperature and high wear resistance. 2. High-precision metal seal. 3. Locking roller ball, to adapt to high-speed. 4. The use of high strength high toughness carbide teeth, 5. Hours in the rotary cone bit with the impact, crushing and shearing the role of broken rock. 6. Cone bit to adapt to the soft, medium and hard of various strata. 7. Reasonable price and long working life. -
API-7-1 Standard rock bit tricone bit TCI Tricone Bits inserted tooth 1.Cutting structure this type TCI tricone bits: The durability of premium tungsten carbide insert is improved with new formulas and new techniques for insert bit. 2.Gauge structure this type TCI tricone bits: Multiple gauge protection with gauge trimmers on the heel of cone, tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capability and bearing life. 3.Bearing structure of this type TCI tricone bits: High precision bearing with two thrust faces. Ball lock the cone. Hardfaced head bearing surface. Cone bearing inlaid with friction-reducing alloy and then silver-plated. Abrasion resistance and seizure resistance of the bearing are improved. 4.Seal and Lubrication of this type TCI tricone bits: Premium O-ring, optimal seal compression and curved seal structure can enhance the seal performance. The pressure compensator system and advanced grease can greatly increase the lubricating reliability . 5.Product Application this type TCI tricone bits: It can receive high WOB in the conventional drilling. It is suitable for various formations by matching cutting structure with different tooth shape, tooth density and tooth exposure height.
Longway has authorized by ISO 9001, NS-1 and Russia GOST RTN . it is able to process drilling tools according to standard DS-1 under a full system of production design and quality control.. our oil drill rod have been tested by the third party, such as China national petroleum pipe research insititue and Russia petroleum pipe quality control center, the quality is stable and reliable.
1) Drill pipe OD: 2 7/8", 3 1/2", 4", 4 1/2", 5" 5-1/2" 2) Steel Grade: E75, G105, S135,X95 3) Type of end finish: EU-external upset, IEU-internal & external upset 4) All drill rod are made according to API 5D standard 5) We can provide in many conditions, with or without hard banding (Arnco100XT, Arnco300XT, tungsten
1) Drill pipe OD: 2 7/8", 3 1/2", 4", 4 1/2", 5" 5-1/2" 2) Steel Grade: E75, G105, S135,X95 3) Type of end finish: EU-external upset, IEU-internal & external upset 4) All drill rod are made according to API 5D standard 5) We can provide in many conditions, with or without hard banding (Arnco100XT, Arnco300XT, tungsten
Float shoes contain a backpressure valve that prevents fluids from entering the casing while the pipe is lowered into the hole and prevents cement from flowing back into the casing after placement, while enabling circulation down through the casing. Float collars are placed one to three joints above the guide shoe or float shoe. They provide a seat for the cement plugs, the bottom plug pumped ahead of the cement and the top plug behind the full volume of slurry. Once seated, the top plug shuts off fluid flow and prevents over-displacement of the cement. The space between the float shoe and the float collar provides a containment area to entrap the likely-contaminated fluids from the wiping action of the top cementing plug, securing the contaminated fluid away from the shoe where a strong cement bond is of primary importance. Float collars include a backpressure valve and serve basically the same function as the float shoe. Features: The Aluminum Alloys used in this product are PDC Drillable. Available in 5 1/2 to 20 sizes. Customized sizes are also available. Applications :In all applications ranging from close tolerance liners to full casing strings. Standard float shoe is provided with round cement nose to deflect offledges or obstructions. Customizable options including nose types, ports/jets, and ball deflector. Can be supplied either in Single Valve or in Double valve. Our Services For more information, you can contact me Looking forward to cooperating with you!
1. Main Technical Parameters: (1). Connection: 7 5/8 REG Pin. O.D. (mm): Ï?210. Length (mm): 290. (2). Connection: 6 5/8 REG Pin. O.D. (mm): Ï?190. Length (mm): 280. (3). Connection: NC 50 Pin. O.D. (mm): Ï?155. Length (mm): 270. (4). Connection: NC 46 Pin. O.D. (mm): Ï?150. Length (mm): 270. (5). Connection: NC 38 Pin. O.D. (mm): Ï?115. Length (mm): 260. (6). Connection: NC 31 Pin. O.D. (mm): Ï?100. Length (mm): 210. (7). Connection: 2 3/8 REG Pin. O.D. (mm): Ï?80. Length (mm): 190. (8). Connection: NC 26 Pin. O.D. (mm ): Ï?89. Length (mm): 200. (9). Connection: 3 1/2 REG Pin. O.D. (mm): Ï?100. Length (mm): 220. (10). Connection: 4 1/2 REG Pin. O.D. (mm): Ï?145. Length (mm): 260. (11). Connection: 2 7/8 EUE Pin. O.D. (mm): Ï?80. Length (mm): 220. (12). Connection: 7 5/8 REG Box. O.D. (mm): Ï?230. Length (mm): 290. (13). Connection: 6 5/8 REG Box. O.D. (mm): Ï?200. Length (mm): 280. (14). Connection: NC 50 Box. O.D. (mm): Ï?160. Length (mm): 260. (15). Connection: NC 46 Box. O.D. (mm): Ï?160. Length (mm): 260. (16). Connection: NC 38 Box. O.D. (mm): Ï?120. Length (mm): 270. (17). Connection: NC 31 Box. O.D. (mm): Ï?120. Length (mm): 270. (18). Connection: 2 3/8 REG Box. O.D. (mm): Ï?110. Length (mm): 200. (19). Connection: NC 26 Box. O.D. (mm): Ï?110. Length (mm): 200. (20). Connection: 3 1/2 REG Box. O.D. (mm): Ï?130. Length (mm): 270. (21). Connection: 4 1/2 REG Box. O.D. (mm): Ï?160. Length (mm): 260. (22). Connection: 2 7/8 EUE Box. O.D. (mm): Ï?80. Length (mm): 220. 2. Product Description: Lifting cap is one special tool for lifting of drilling tools in petroleum, natural gas, drilling engineering and geographical exploration, also called as lifting bail. We can provide the lifting cap or lifting bail in integral type or circular type. 3. Features: (1). API certified product with national best quality. (2). Forging type products used for lifting pipe collars, with regular thread connection. (3). Customized products available. (4). Warranty six months after sale. 4. Certification: API. 5. Condition: New. 6. Color: Required. 7. Model: Lifting cap. 8. Place of Origin: China (Mainland). 9. Price FOB in USD: 300~800/Piece(s). 10. Material: Carbon Steel. 11. Processing Type: Forging. 12. Machine Type: Drilling Tool. 13. Use: Well Drilling. 14. Processing Time: 30days. 15. Supply Ability: 10000 pieces/per month. 16. Payment Terms: T/T; L/C; Western Union. 17. Packing & Delivery: (1). Packing Details: Standard Export Package. (2). Port: China Main Port.
1. Main Technical Parameters: (1). Connection: 7 5/8" REG Pin. O.D. (mm): 210. Length (mm): 290. (2). Connection: 6 5/8" REG Pin. O.D. (mm): 190. Length (mm): 280. (3). Connection: NC 50 Pin. O.D. (mm): 155. Length (mm): 270. (4). Connection: NC 46 Pin. O.D. (mm): 150. Length (mm): 270. (5). Connection: NC 38 Pin. O.D. (mm): 115. Length (mm): 260. (6). Connection: NC 31 Pin. O.D. (mm): 100. Length (mm): 210. (7). Connection: 2 3/8" REG Pin. O.D. (mm): 80. Length (mm): 190. (8). Connection: NC 26 Pin. O.D. (mm): 89. Length (mm): 200. (9). Connection: 3 1/2" REG Pin. O.D. (mm): 100. Length (mm): 220. (10). Connection: 4 1/2" REG Pin. O.D. (mm): 145. Length (mm): 260. (11). Connection: 2 7/8" EUE Pin. O.D. (mm): 80. Length (mm): 220. (12). Connection: 7 5/8" REG Box. O.D. (mm): 230. Length (mm): 290. (13). Connection: 6 5/8" REG Box. O.D. (mm): 200. Length (mm): 280. (14). Connection: NC 50 Box. O.D. (mm): 160. Length (mm): 260. (15). Connection: NC 46 Box. O.D. (mm): 160. Length (mm): 260. (16). Connection: NC 38 Box. O.D. (mm): 120. Length (mm): 270. (17). Connection: NC 31 Box. O.D. (mm): 120. Length (mm): 270. (18). Connection: 2 3/8" REG Box. O.D. (mm): 110. Length (mm): 200. (19). Connection: NC 26 Box. O.D. (mm): 110. Length (mm): 200. (20). Connection: 3 1/2" REG Box. O.D. (mm): 130. Length (mm): 270. (21). Connection: 4 1/2" REG Box. O.D. (mm): 160. Length (mm): 260. (22). Connection: 2 7/8" EUE Box. O.D. (mm): 80. Length (mm): 220. 2. Product Description: Lifting cap is one special tool for lifting of drilling tools in petroleum, natural gas, drilling engineering and geographical exploration, also called as lifting bail. We can provide the lifting cap or lifting bail in integral type or circular type. 3. Features: (1). API certified product with national best quality. (2). Forging type products used for lifting pipe collars, with regular thread connection. (3). Customized products available. (4). Warranty six months after sale. 4. Certification: API. 5. Condition: New. 6. Color: Required. 7. Model: Lifting cap. 8. Place of Origin: China (Mainland). 9. Material: Carbon Steel. 10. Processing Type: Forging. 11. Machine Type: Drilling Tool. 12. Use: Well Drilling. 13. Processing Time: 30 days. 14. Supply Ability: 10000 pieces/per month. 15. Payment Terms: T/T; L/C; Western Union. 16. Packing & Delivery: (1). Packing Details: Standard Export Package. (2). Port: China Main Port.
Material: E75/X95/G105/S135 OD: 2 3/8" to 6 5/8" Wall Thickness: 6.45mm to 12.7mm Length: R1(6.10-7.01meters) R2(8.84-9.75meters) R3(12.19-13.72meters) Hard band: Arnco100XT, Arnco200XT and Arnco300XT; Botn1000, Botn3000, TCS8000, TCS-Titanium, Armacor M etc. Also we can make according to customers' requirements. Standard: API 5DP RSC Type: NC26 NC31 NC38 NC40 NC46 NC50 NC55 6-5/8FH UPSET: EU(External upset) IU(Internal upset) IEU(Internal & External upset) Technical: Hot Rolled Surface treatment: blank oil painting Packing: 6/9/12 pieces in a bundle packed with steel holder Third party inspection: BV_SGS_ISO Usage: oil gas industry, well drill industry
Drill pipe is used in the drilling. Its a major drilling component which connects rotary system, hoisting system, circulation system with drill collar and bit. Through it the rotary table drives the bit rotation, hook drives bit up and down and drill fluid flows to the well bottom forming circle to make the bit breaks rock and reaches continuous drilling. 1) Certificate: API 5DP, API Q1, ISO 9001, ISO 29001 2) Size Range: 60.32-168.28mm 3) OD: 2 3/8, 2 7/8, 3 1/2, 4, 4 1/2, 5, 5 1/2, 6 5/8 4) Grade: G105, S135, X95, E75 5) Wall Thickness: (0.25-0.50) inch or (6.45-12.70) mm 6) Length: R1: 6.10-7.01m; R2: 8.84-9.75m; R3: 12.19-13.72m 7) Upset style: IU, EU, IEU
Sl-swivel with spinner Xsl-swivel with spinner is a combination of swivel and kelly spinner, driven by air motor or hydraulic motor, with keyless connection adopted between spinner and central pipe of swivel.It is designed and manufactured according to api spec 8c "specification for drilling and production hoisting equipment" Skype: julia0402zcy Water swivel for drilling 1.Ma.Static load:4500kn 2.Max.Rotary speed:500r/min 3.Max.Wp:35mpa 4.Id of center pipe:75mm Water swivel for drilling The swivel includes two main categories, which are common swivel and double duty swivel. Double duty swivel is a common swivel combined with a spinner. Common swivel consists of swivel bail, shell, support, gooseneck, central pipe, master bearing, joint and other parts. The lower end is connected with kelly stem by reg thread. The swivel bail is hung on the hook. Gooseneck and rotary hose can be connected by reg thread connection or union connection. Washpipe packing set assembly adopts cassette structure, so it can be quickly replaced without disassembling rotary hose and gooseneck. 3lp and 4lp internal or external thread hose connection thread are available for you. We can also manufacture low temperature resistant swivel according to customer's requirements. Our swivel meets api spec 8cpsl1 standards. It has been awarded the api certification issued by the american petroleum institute and is allowed to use api monogram.
Steel tooth bits series: Soft formation tooth bits: The soft formations tooth bits are used to drill low compressive strength, soft formations. Long projection tooth lengths are used on high offset cones to provide the greatest penetrations rates possible. Wear resistance hard facing is used to control tooth wear. On the softest bit types this hard facing completely covers the bit teeth. Medium hard formations tooth bits: The medium hard formation tooth bits are used to drill high compressive strength, medium hard formations. Shoot projection teeth with reduced crest length are used in this series of bit designs. Durable hard facing is applied to reduce tooth wear.
Tricone Bit, Steel Tooth Bit, TCI tricone Bit, Single Cone Bit, Rock drill Bits,Rotary Bits. Application Petroleum & Gas ,Water well ,Mining and Tectonic Industries ,Oil field, Construction, Geothermal, Directional Boring, and Underground Foundation work. 1) Condition: 100% new 2) Manufacturer brand name: GREAT 3) The bit size: 2 7/8" - 36" 4) IADC code: 111,115,117,127,137,217,417,517,537,617,637 etc. 5) Seal type: Rubber Sealed Bearing ,Metal Sealed Bearing. 6) Bearing type: Sealed Journal bearing ,Roller Bearing ,Air Bearing. 7) Nozzle quantity and nozzle size: 3 nozzles. 8) Connection joint Pin size: API 2-3/8"-7 5/8" Reg.
Tricone Bit, Steel Tooth Bit, TCI tricone Bit, Single Cone Bit, Rock drill Bits,Rotary Bits. Application Petroleum & Gas ,Water well ,Mining and Tectonic Industries ,Oil field, Construction, Geothermal, Directional Boring, and Underground Foundation work. 1) Condition: 100% new 2) Manufacturer brand name: GREAT 3) The bit size: 2 7/8" - 36" 4) IADC code: 111,115,117,127,137,217,417,517,537,617,637 etc. 5) Seal type: Rubber Sealed Bearing ,Metal Sealed Bearing. 6) Bearing type: Sealed Journal bearing ,Roller Bearing ,Air Bearing. 7) Nozzle quantity and nozzle size: 3 nozzles. 8) Connection joint Pin size: API 2-3/8"-7 5/8" Reg.
Our company can supply you the mud pump spare parts for you. All our spare parts are manufactured according API specification.and it is made for F series and 3NB series mud pump. Up to the parts you want.
