Materials: Alloy-steel of high quality 1) 38CrMoAIA(JIS SACM 645) 2) 9Cr18MoV Nitrided hardness: HV900-1000 Nitrided Case Depth: 0.5mm-0.6mm Alloy hardness: HRC50-65 Alloy depth: 0.8mm-2.0mm Advanced nitriding process Corrosion & Abrasion resistance bimetal spraying process. Wooden case.
Twin conical screw extrusion line Technical specifications: Model Kem50 kem55 Kem65 Kem80 Diameter of Screw(mm) 51/105 55/110 65/132 80/156 Number of screws 2 2 2 2 Rev direction of screws Turn outwards in different directions Speed of screws (r/min) 1-37 1-40 1-34.7 1-36.1 Effective length of screw (mm) 1065 1200 1440 1880 Main motor (hp) 20 20 30 50 Barrel heating power (kw) 10 18 24 36 Productivity (kg/hr) 135 150 250 450
KORYO COMPRESSOR OIL High Performance Compressor Oil 32/46/68 DESCRIPTION KORYO COMPRESSOR OIL is premium performance long-life synthetic rotary screw compressor oil containing a special oxidation and rust inhibitor, anti-foam to optimiz performance in severe operating conditions, it helps reduce maintenance costs and provides longer oil life, it is recommended for use in rotary air compressors operating under moderate to severe conditions and Industrial equipment operating over a wide temperature range PERFORMANCE DIN 51506 VDL, ISO 6521 PACKAGE 20L, 200L Steel Pail/Barrel
or good plasticizing effect,we have different designs of screw and barrel for extruder or injection to meet customer's demand.Our factory manufactures with high-quality material, applying the method of hardening and tempering and nitriding, thus it enjoys the characteristics of long working life, wear resistance, and anti corrosion. Besides, the technique of hard alloy spraying or chrome plating can be used on the working surface of screw, which will make it have better using effectiveness.
20 MM TO 150 MM Screw Barrel For Injection Moulding Machine
APPLICATION A Commonly used for adding acid plastic with GF less than 30% B For transparent material and color mixing material TECHNICAL PARAMETER A Using 38CrMoAlA high quality alloy structural steel, the top spray-welded nickel based alloy powder. Alloy thickness1.5mm. Hardness HRC 53-56 B 42CrMo alloy structural steel sprayed with nickel-base alloy powder.Alloy thickness1.5mm,Chrome plating thickness 0.03-0.05mm.
SPECIFICATION Size15 mm300mm Max Length10000mm Nitriding HardnessHV900 Hardness of 0.2mm deep76038CrMoALA Nitride brittleness2 Class Surface roughnessRa0.4µ m Straightness0.015mm Thickness of alloy layer1.5-2mm Alloy hardness:HRC56-60 Thickness of chromium plating layer :0.030.05mm APPLICATION Film blowing/Granulation/Wire & Cable/Sheet & Panel and other single screw extrusion products PVC PE PP ABS TPE and other plastics
Over 29 years experience in screw and barrel , more info pls find kaylee(at)tizatech.com Specification: Diameter: Ã?15-Ã?500 L/D ratio:15-55 Base Materials: 1)38CrMoAlA(SACM 645) 2)42CrMo(AISI 4140) 3)Cr12MoV(SKD11) 4)4Cr5MoSiV1(SKD61) 5)9Cr18MoV 6)40Cr Bimetallic Alloy Materials: 1)Fe-based alloy 2)Ni-based alloy 3)Co-based alloy 4)Tungsten carbide Processing Technology: Heat treatment High-frequency quenching Nitriding treatment Hard-chrome electroplating Bimetallic alloy welding Technical Parameter: Nitrided layer depth:0.50-0.80mm Nitrided hardness: 900-1100HV Nitrided brittleness: Less than 2 level Surface roughness: Ra 0.4 Linearity of screw: 0.015mm Hard-chrome plating hardness: â?¥950HV Chrome-plating layer depth: 0.025~0.10mm Bimetallic layer depth: 2 mm Bimetallic hardness: HRC50-65 Material to be extruded: PP, PE, PVC, ABS, AS, PS etc. We can manufacture all types of screws and barrels according to clientsâ?? requirement
Specification: Screw diameter: d20mm-d220mm Mould clamping force: 250t-3200t Shot weight: 30g-30000g Technical information Base materials: (1)38crmoala(jis sacm645) (2)42crmo(aisi 4140) (3)4cr5mosi v1 (jis skd-61) (4)9cr18mov (5)hpt Bimetallic alloy materials: 1)fe-based alloy 2)ni-based alloy/deloro alloy 3)co-based alloy 4)nico-based alloy 5)tungsten carbide/wolfram carbide Technics: Heat treatment High-frequency quenching Nitriding treatment Hard-chrome electroplating Bimetallic alloy welding Bimetallic alloy centrifugal casting Technical parameter: Nitrided layer depth: 0.5-0.8mm Nitrided hardness: 900-1000hv Nitrided brittleness: less than grade 1 Surface roughness: ra0.4 Linearity of screw: 0.015mm Hard-chrome plating hardness after nitriding: ¡ã 950hv Chrome-plating layer depth: 0.025-0.085mm Bimetallic layer depth: 3mm. Slushing oil coated& film wrapped in wooden case
Specification: Screw diameter: d20mm- d220mm Mould clamping force: 250t-3200t Shot weight: 30g-30000g Base materials: (1)38crmoala(jis sacm645) (2)42crmo(aisi 4140) (3)4cr5mosi v1 (jis skd-61) (4)9cr18mov (5)hpt Bimetallic alloy materials: 1)fe-based alloy 2)ni-based alloy/deloro alloy 3)co-based alloy 4)nico-based alloy 5)tungsten carbide/wolfram carbide Technics: Heat treatment High-frequency quenching Nitriding treatment Hard-chrome electroplating Bimetallic alloy welding Bimetallic alloy centrifugal casting Technical parameter: Nitrided layer depth: 0.5-0.8mm Nitrided hardness: 900-1000hv Nitrided brittleness: less than grade 1 Surface roughness: ra0.4 Linearity of screw: 0.015mm Hard-chrome plating hardness after nitriding: 950hv Chrome-plating layer depth: 0.025-0.085mm Bimetallic layer depth: 3mm. Slushing oil coated& film wrapped in wooden case
Specification: Screw Diameter: D15- D 300 L/D ratio: 15-46 Product classification: Aiming at different plastic products the screw can be chosen from: General type, pin type, barrier type, separation type, and gas-exhausting type, etc. Base Materials: (1)38CrMoAlA(JIS SACM645) (2)42CrMo(AISI 4140) (3)4Cr5MoSi V1 (JIS SKD-61) (4)9Cr18MOV (5)HPT Bimetallic alloy materials: 1)Fe-based alloy 2)Ni-based alloy/Deloro alloy 3)Co-based alloy 4)NiCo-based alloy 5)Tungsten carbide/Wolfram carbide Technics: Heat treatment High-frequency quenching Nitriding treatment Hard-chrome electroplating Bimetallic alloy welding Bimetallic alloy centrifugal casting Technical parameter: Nitrided layer depth: 0.5-0.8mm Nitrided hardness: 900-1000HV Nitrided brittleness: less than grade 1 Surface roughness: Ra0.4 Linearity of screw: 0.015mm Hard-chrome plating hardness after nitriding: >950HV Chrome-plating layer depth: 0.025-0.085mm Bimetallic layer depth: 3mm Slushing Oil Coated& Film Wrapped in Wooden Case
Name Lemon Tahiti, seedless Appearance Shape of the variety Consistency Firm Foreign Materials Free External Moisture Free Origin Colombia Color Green free of spots, wounds Diameter - mm Box 18.5 kg 4.6 kg 47-49 250 63 50-51 230 54 52-55 200 48 56-59 175 42 60-64 150 36 65-70 110 37 Diameter - mm Gauge Average Weight - g > = 68 A 179 67-60 B 132 59-50 C 90 49-43 D 61 The lemon has high levels of carbohydrates that provide energy to the body.
Yizumi injection molding machinery ranges from 60 to 3500 tons. Such as: SK Series : 90-480T A5 Standard Series : 60T â?? 560T A5 Standard Series : 60T â?? 560T SM Series: 90-480T
Alloy screw Introduction: 38CrMoAlA nitrided spiral-spray nickel-based alloy It adopts Germany imported automatic plasma surfacing machine for alloy surfacing welding. The thickness of the alloy is more than 1.5mm, the hardness is HRC50~56, the welding strength is high, the structure is compact, and the screw wear resistance, high temperature resistance and corrosion resistance can be improved. Basic parameters: Screw alloy hardness (HRC): 48-58 Wear resistance: good Corrosion resistance: poor Scope of application: Applicable resin with 15% glass fiber below the plastic Add glass fiber 15% or less PC, PMMA, PP, PP fireproof, PS, AS, ABS, PVC, PET, PO, POM, AS, TPU, TPR, TPE, PC+ABS Alloy barrel nickel base alloy Wear and corrosion resistant Basic parameters: Hardness (HRC): 55-60 Wear resistance: excellent Corrosion resistance: excellent Temperature range (°C): �450 Scope of application: Production of viscous, wear-resistant and corrosion-resistant resin General general resin and engineering resin contain 50% glass fiber, PE, PP, ABS, AS, PS, TPE, PC, PEI, PEEK, PPS, PAR Special engineering resin, PA, PBT, LCP containing less than 45% of glass fiber. Ingredients and processes: Alloy composition: Ni+Cr+W+B
Single Screw and barrel for Injection Moulding Machine Nitride hardness HV850 â?? 1000 Screw diameter Range Φ20~Φ300mm Max. Barrel Inner Bore Diameter 500mm Nitride case depth 0.45 - 0.7mm Screw bimetallic depth 0.8-1.2mm Barrel bimetallic depth HRC 58-60
Hello! Thanks for reading our selling lead as follows. My name is Alex, a third-generation successor of family business group. We are experieced in the trading area and dealing with various products(such as electronic, plastic, rubber....etc.) in Asia until now. We also provide excellent cylinder, screw, screw and barrel assembly parts for multipurposes. We have confident and want to mention our important principle again - we always pay more attention to the quality of products than customer itself. Please refer to our company profile in order to realize more or visit our website: http://www.sssmile.com.tw/English/main.asp Certificated by D-U-N-S(Dun & Bradstreet) https://www.directory.dnb.com/profiles/en/SUN-SMILE-CORPORATION-347529.html Thanks. Sun Smile Corporation Alex
Screw diameter: 35mm-200mm Length: less than 10000mm Barrel diameter: 35mm-200mm Material: 38crmoala; skd61; skd11; 40cr; 42crmo; high quality alloy steel Technology for tin coated screw barrel/: nitriding treatment, alloy coating spraying, heat-treatment, quenching Appliance for tin coated screw barrel/: pa, evoh, eaa, pc etc
Nitriding Commonly used for acid free plastics with GF less than 10%, such as PP PS AS ABS TPU TPE 38 CrMoAlA high quality alloy structural steel, quenching and tempering hardness HB260-280,nitriding hardness HV950±50 degrees, nitride layer depth 0.4-0.6mm, brittleness â?¤2
Product Details: Minimum Order Quantity : 100 Unit Size : M5 M6 M8 M10 M12 M14 M16 M18 M20 Brand : TSM Quantity Per Pack : 1000 Our company is one of the leading suppliers of widely accepted and highly qualitative Screws for all our customers. Our range of Screws is manufactured by our vendors using high grade metal. These screws are known for its striking features like durability, reliability, anti-corrosive nature, and chemical resistant. It finds application in mechanical, structural and general engineering industries. Available in different sizes, specifications and competitive rates, our screw is used for connecting two or more parts with each other.
Product Details : Minimum Order Quantity - 12 Number Size - M6 to M300 Brand - TSM Quantity Per Pack - 100, 50, 12 Legnth - 6mm to 300mm Diameter - 1/8" to 1" We are supply high tensile Socket head cap screws. N/mm2- 1300(12.9) Tensile Class : Psi min-190000
