Brief description YJS-525 is medium hardness silicone with hardness Shore A 25. It is a kind of of two- component materials consisting of a flowable part A which when mixed with the curing agent or catalyst,cures at room temperature by a condensation recation. It is widely used for resin, gypsum, concrete/cement and artificial stone molding. Features -Easy to demould -Good resistance to tearing -Good elastic -Good tear&tensile strength -Dimensional stability in time ( deformation - shrinking only up to 0.3 % ) -Remarkable resistance to high temperatures (up to 200 - 220â?? ) -Final curing at room temperature Specification Typical general characteristics Inspection Method Value Product data (Catalyzed A+B) YJS-525 Hardness Shore A 25�±2 Mix Ratio A:B 100:2 Color / White Pot life 25 �°C (77F) 30-40mins Curing time 25 �°C (77F) 3-4 hours Mixed viscosity mPa.s 15000�±1000 Tear-strength kg/cm â?¥25 Tensile-strength M.pa â?¥4.2 Elongation % â?¥480 Shrinkage % â?¤0.3% Package * Small size:1kg/jar A +20gram/jar B, 12 jars in one carton. MAX 336KGS in one pallet 5kg/jar A + 100gram/jar B, 6 jars in one carton. MAX 750KGS in one pallet(metal drum) 5kg/jar A+ 100gram/jar B, 4 jars in one carton. MAX 480KGS in one pallet(plastic drum) * General size: 20kg/pail A +400gram/pail B, 18 pails or 24 pails or 27 pails in one pallet 25kg/pail A + 500gram/pail B, 18 pails or 24 pails or 27 pails in one pallet 200kg/pail A + 4kg/pail B, 2 pails or 4 pails in one pallet 1kg package 12 jars in one carton. MAX 336KGS in one pallet 5kg metal drum 6 jars in one carton. MAX 750KGS in one pallet(metal drum) 5kg plastic drum 4 jars in one carton. MAX 480KGS in one pallet 20kg or 25kg plastic drum 18 pails or 24 pails or 27 pails in one pallet 20kg or 25kg metal drums 18 pails or 24 pails or 27 pails in one pallet 200kg metal drum 2 drums or 4 drums in one pallet Storage YJS-525 has a shelf life of at least 12 months in the sealed container between 5 C and 30 C. If the material is kept beyond 12 months it is not necessarily unusable, but a test should be performed on the product to check suitability to the application
feel free to contact us by email or others Product Description 2019 EVINRUDE 30 HP E30DGTL OUTBOARD MOTOR Engine Engine Type: Inline 2-Cylinder E-TEC D.I. Bore x Stroke: 2.992 x 2.5 in. (76 x 64 mm) Displacement: 35.2 cu.in. (577cc) Starting: Electric and Rope Dimensions Shaft Length: 20 in. (508 mm) Weight: 187 lb. (85 kg) General Trim Method: Power Trim and Tilt Propshaft Horsepower: 30 hp Full Throttle Operating Range: 5500-6000 rpm Gear Ratio / Shift: 2.15:1 Fuel Induction: E-TEC Direct Injection with stratified low RPM combustion mode Alternator: 56 Amps Total / 15 Amps Net Dedicated Steering: Tiller (Remote Available) Warranty: 3-Year, Non-Declining Features Auto-Storage: The auto winterization feature fogs the engines itself in minutes, with no trip to the dealer. An Evinrude E-TEC engine does not require belts, camshafts or exhaust valves, which means there are fewer parts to wear down or malfunction than a four--stroke outboard. Extend the life of your outboard and your boating season. More Miles Per Hour: Get even more extra miles per hour with the Straight Leading Edge gearcase. The Evinrude SLE gearcase features high-efficiency water pickups and a weed-slicing shape up front, for a cooler-running engine and ultimate durability and reliability in the long run. Specifications Engine Model: E30DGTL Graphite Engine Type: Inline 2-Cylinder E-TEC D.I. Bore x Stroke - in (mm): 2.992 x 2.5 (76 x 64) Displacement - cu in (cc) L: 35.2 (577) Gear Ratio: 2.15:1 Full Throttle RPM Range: 5500-6000 RPM Weight - lbs (kg): 187 (85) Starting: Electric and Rope Controls: Mechanical Fuel Induction: E-TEC Direct Injection with stratified low RPM combustion mode Alternator Output*: 56 Amps Total / 15 Amps Net Dedicated Steering: Tiller (Remote Available) Trim Method: Power Trim and Tilt Trim Range: -4to 16 Tilt Range: 65 Shaft Length - in (mm): 20 (508) Lubrication: Multi-Point Targeted Oiling Oil Tank Capacity - gal (L): 1.7 (1.6) Recommended Oil: Evinrude / Johnson XD-100 Oil Recommended Fuel: 87 Octane Warranty: 3-Year, Non-Declining Emissions Compliance: EPA 2013 / CARB 3 STAR / European Union
Mini pleat air filter is a kind of high efficiency particulate air filter,also known as Absolute filters, it is the most effective filter medium for contaminants such as smoke, dust and bacteria,etc. The efficiency even can reach 99.999% on 0.1 & 0.3 micron, which are the ultimate means of removal of micron air borne particles(1/200 of hair diameter) and are widely used for H13 or higher applications. Mini pleat air filter's configuration offers five times compared with the traditional HEPA filter, and also improved filtering abilities and longer filter life. Mini pleated air filter is designed to remove most dust particles from the air including pollen, mold, dust mites and pet dander. It has the characteristic of offering low resistance for improved airflow, and is sealed well in case of air bypass. Using HEPA mini-pleat technology, the MINI-CELL delivers high performance in a small package, light weight. Requiring only a fraction of the space required by other rigid filters, these pint-size panels make the most of their face area, packing up to 50 sq.ft of media for every square foot of filter face. This offers a significant savings of storage and freight costs, which in turn means fewer trucks on the road burning fuel and creating emissions. Standard Features â??Media: Pleated micro fibre glass media â??Thermoplastic pleat separators â??Frame make : Galvanized steel , Stainless steel, Aluminum â??Gasket Type: Non-porous endless gasket, leak-test gasket, Silicon , EPDM , etcâ?¦ â??Single or double edged flange â??Synthetic media(PTFE) Speciality â?? High quality glass fibre paper; â?? Glass fibre paper is folded into closely spaced shallow pleats ,with textile thread spacers to ensure an optimum pleating geometry; â?? Efficiency up to 99.9999%; â?? Laser testing one bye one, Temperature resistance up to 80, small resistance, high efficiency, long service life ; Applications The environments requiring highly air quality, such as all kinds of clean room in different industries. Quality Control SNYLI is striving to providing high quality air filters for customers. And we have a series of rigorous quality testing before delivery. No matter what sizes you need, and no matter what standard you require, we will try our effort to meet. These standards have enabled us to maintain customer satisfaction while building strong customer loyalty.
Product information Product name: OPTICALBRIGHTENER ER Liquid(PS-1. ER330) Color Index No: C.I.199 Synonyms: FBA 199; OBA 199,Fluorescent Brightener PS-1(ER330); Optical Brightener Agent PS-1(ER330) Molecular Structure: Molecular Formula: C24H16N2 Molecular Weight: 332.3972 CAS No: 13001-39-3 C.I. No.: C.I.199 Appearance: yellowish pulpy liquid E-value: 330 Features: Thisproduct is mainly used for whitening and brightening of blending fabrics suchas polyester and polyester cotton, polyester silk, polyester yarn, polyesterramie, polyester wool as well as whitening of chemical fiber and plastic. Thisproduct applies to pad dyeing and HTHP dip dyeing, especially low temperatureadsorption and high temperature setting process. Applications 1. Pad-dyeing hot melt method: Use quantity: 1.5-3g/L Process flow: two dip dyeing and two paddyeing (mangle expression 70) pre-drying (100) curing and setting (180 190, 40-30s). 2. HTHP dip dyeing method: Use quantity: 0.2 0.5% (o.w.f) Dyeing temperature: 120 130 Dyeing time: 30 - 60 minutes PH value: 4.5 - 5.5 (adjusted withacetic acid) Low temperature adsorption and hightemperature color development dyeing method: Use quantity: 0.5 1.0% (o.w.f) Dyeing temperature: 50 60 Dyeing time: 30 minutes PH value: 4.5 - 5.5 (adjusted withacetic acid) Process flow: add BC-100 whitening agentand additive (anhydrous sodium sulphate 1-2% relative weight of dyed cloth,acetone is adjusted in PH) and fabric to dye bath at room temperature temperature rises to 50, deying for 30min washing dehydration and pre-drying (100) setting and baking (180-190, 40-30s). Package & Storage: 25kg/50kg plastic drums. It can be packedin other forms according to user's requirements. Shelf life: not more than 12 months inthe room temperature. Cautions: 1.If suspension liquid is foundprecipitated and separated, just shake it before use, which does not affect theuse effect. 2.Please note that use this product within its yellow spot, i.e. paddyeing 5g/l,dip dyeing 0.8%(o.w.f). If use this product beyond its yellow spot, it will be easy to becomeyellow.
110/220V 100W S-998P PN-998 electric vacuum double-pump solder sucker desoldering gun soldering iron, S-998P desoldering gun is very easy for you to desoldering and remove the solder, S-998P desoldering gun device is 2 in 1 soldering / desoldering station, including soldering iron and desoldering vacuum pump. 220V AC 100W 350~450 : S-998P Electric Desoldering Gun Vacuum Pump Solder Sucker. S-998P PN-998P. Features : Fast heat up function, heated up to 350 C for one minute a stable working temperature and the instantaneous temperature function, suitable for continuous use Storage Tin glass tube with heat, easily disassembled for easy cleaning Enhanced double-pump, suction larger, more easily than tin Transparent back cover, air pump working at a glance Design horizontal motor Pump easy to clean, easy to maintain High insulation, anti-static Super longevity printed circuit ceramic heater Suction greater than 650 mmhg Suitable for double-sided and multilayer circuit boards Adjustable constant temperature of 350 450 High power heating with rapid heating function Stable operating temperature 2 C. High insulation design in addition to static patent Horizontally motor design Dual air pump structure strong suction Energized minutes Distribution ST-2091 Deluxe Desoldering gun holder Transparent back cover air pump work at a glance The air pump easy to clean and easy maintenance Product Specification : Model S-998P Power supply voltage AC 220V 240V 50Hz Vacuum pump Dual Diaphragm type Power consumption 100W Motor Power 20W Heat-generating components 80W ceramic heater Temperature range 350 450 Temperature control accuracy 2 Vacuum degree Greater than 650mmHg Insulation Resistance 100M Work Continuous Circuit control system No interference NOZZLE specifications 1.2mm Package List 1pcs x S-998P desoldering gun 2pcs x Cleaner needle 2pcs x Filter 1pcs x Desoldering gun 1pcs x 1.0mm nozzle
High Speed USB 3.0 Industrial Camera for Machine vision imaging system,1.3MP Color Global Shutter Machine vision camera With SDK Support OpenCV And Python 240FPS. Description: 1 This series all comes with hardware cache, which is very suitable for one computer to connect multiple cameras. It only needs one ordinary USB3.0 HUB to realize four 5MPcameras to 15FPS frame rate at the same time, effectively reducing system cost! 2 Support PC linux system, can be integrated in the embedded device. 3Supports external trigger flash sync. 4 A computer connected to a number of cameras can work stably, do not drop the line for a long time, do not lose frame. 5The camera comes with an editable IO. 6 Dimensions: SUB Series 29X29X51mm 7 SUB full range support U3VISION agreement, can seamlessly support HALCON, Labview and other visual software. Standard Equipment: 1Camera, CS / C adapter, trigger line. 2 WDM drivers, Directshow, TWAIN, Halcn, OCX, Labview components. 3 Camera presentation software, measurement software for 32 / 64WINDOWS XP, WIN7, WIN8 and Linux systems, embedded Linux system. 4 SDK package, including VC / C ++, C ++ builder, VB6, VB.NET, Delphi, C development routines. 5 Offline RAW to RGB program. 6 Measurement software, permanently free to use. Feature Product 1 Support multi-camera work at the same time, stable and reliable, and GIGE camera SDK is fully compatible, can be replacedseamlessly. 2 Camera parameters are saved in file form, easy to mass production release, development is simple, cross-platform compatible.Support 8bit, 24bit, 32bit image data format output. 3 Support for small resolution high frame rate preview, large resolution capture function, seamless switching. 4 Support for resolution customization. View cutting (ROI), BIN, SKIP pumping point, zoom function can be freely combined set,match the different aspect ratio and field requirements. 5 The body comes with up to 16K bytes of user data storage space. Package incluede: 1 x Industrial Camera(No include lens) 1 x 3 Meters Cable 1 x Trigger line
1.100 meters long distance stable transmission, support POE power supply (default does not support POE); 2.Compatible vision standard, direct support Halcon, VisionPro and other software; 3.Pixels from 0.3MP to 14MP, CCD and CMOS; 4.Comes with hardware image processing acceleration, reduce the host side CPU occupancy rate; 5.Support multi-camera at the same time, the number is not limited, any network; 6.Unique packet retransmission technology; to ensure reliable transmission of data; 7.Excellent SDK design, like the use of USB camera as simple, plug and play; 8.Support external trigger and flash sync, up to seven GPIO, all optical isolation; 9) Dimensions are 29x29x40 mm. Standard Equipment: 1) Camera, CS / C adapter ring, Trigger line. 2) WDM driver, Directshow, TWAIN, Halcn, OCX, Labview components. 3) Camera demonstration software, Measurement software for 32 / 64WINDOWS XP, WIN7, WIN8 and WIN10 operating system. 4) SDK package, including VC / C + +, C + + builder, VB6, VB.NET, Delphi, C # development routines. 5) Offline RAW to RGB program. 6) For a number of color cameras at the same time high-speed preservation of RAW image data offline converted to bmp or jpg formatimages. Feature Of Product: 1) Support multi-camera work at the same time, stable and reliable, fully compatible with the USB camera SDK, can be seamlessreplacement. 2) Camera parameters archived in the form of preservation, easy production release, the development of simple, cross-platformcompatible. 3) Camera name can be modified to easily distinguish between multi-camera. 4) Support 8bit, 24bit, 32bit image data format output. 5) Support small resolution high frame rate preview, large resolution capture function, seamless switching. 6) Support for resolution customization. View cut (ROI), BIN, SKIP point, zoom function can be freely combined set, match thedifferent aspect ratio and visual field requirements 7) The fuselage comes with up to 16K bytes of user data storage space. 8) Comes with hardware acceleration module, to achieve LUT, color correction and other functions, effectively reduce the host CPUoverhead. Package incluede: 1 x Industrial Camera(No Include Lens) 1 x Trigger line 1 x 5 Meters Gigabit Ethernet Cable 1 x 12V Power Supply
48MP 4K 1080P HDMI USB Industrial Microscope Camera Kit 130X C-Mount Zoom Lens 40-LED Ring Light Tripod Stand For Phone PCB Repair Live Streaming Video Recording. 48MP 4K Camera Specification: Model: Camera with HDMI USB2.0 two output Image sensor: 48 megapixel sensor Power supply: 5-12V 1A Frame rate: 1920 1080 60F S HDMI output Video save Movie size: 4K(25fps) 2K(30fps) 1080P(60fps) 720P(60fps)(Note: If you need to record 4K or 2K video, you need to use the SDHC class10 TF card.) Housing: All metal Support: C-Mount lens White balance: Auto manual Cross cursor: Support multi-color, size adjustable TF card interface: Max 32G HDMI interface: HDMI USB output Image: 48M 8000X6000 38M 7168X5376 26M 5888X4416 20M 5120X3840 16M 4608X3456 Language: Chinese/English Frequency: 50Hz/60Hz Monitor: 16:9/16:10/4:3 Grid line: 15 Horizontal line, 15 Vertical line, Central scale line,Custom colors,Size Overhead Tripod Specification: Color: Black Material: aluminum alloy Top with 1/4 inch screw, suitable for mobile phone clip, ring light, camera, etc. The base has several non-slip rubber pads to prevent sliding. Multi-angle shooting. Shoot on the ground and live video on the desktop. Simple installation, foldable storage, convenient for travel. For live streaming, video recording, makeup, still life photography, etc. 130X Zoom C-MOUNT Lens: Working distance: 55 285mm Magnification Power by 8X 130X Size: 110 mm(L) 38 mm(DIA) Visual field: 5mm-35mm 40 LEDs Ring Light Specification: Outer diameter size: 50mm (1.97) Inner diameter size: 30mm (1.18) input Voltage: AC 110V To 240V, Power: 3.5W to 5W; Brightness Adjustment: 0 to 100% Color of light : White, Color of shell: black Quantity Of LED : 40pcs Full Set Package including : 1 x Microscope Camera (4K 48MP ) 1 x Power supply (EU/US/AK/UK) 1 x C-mount Lens 1 x 50mm Ring Adapter 1 x Camera Phone Tripod 1 x 40LEDs Ring Light
MS5 1000X Digital Microscope HD 1080P 8LED USB WiFi Electronic Microscope Mobile Phone Microscope for Smartphone, Computer, iPad, PCB Inspection, Biology lab, science research student education. Description: Eight bright white light LED light fill light easily deal with all kinds of energy use, day and night scene. The adjustable 50 x-1000 x focusing let the one-handed operation more convenient. Support horizontal and vertical 360 vision no dead Angle observation, up and down at the bottom have prevent slippery effect. Support USB micro type-c a variety of functions, multiple choice. Suit for Gem testing, circuit board testing, auxiliary teaching, textile testing, watch repair, check the skin ect. Specifications: Item name: Electronic microscope Color: Black Product type: MS5 Lens optical size: 1/6.5 Signal-to-noise ratio: 42dB Sensitivity: 2.5V/ Lux. s Photograph Resolution: Video resolution: 640x480, 1280 720, 1920 1080 Video format: MOV Focus mode: Manual Image format: JPG Magnification: 50x-1000x Light source: 8 LED lights (brightness adjustable) Focus range: 10~40mm (can view the perspective) WiFi distance: Within 3 meters White Balance: Automatic Exposure: Automatic PC OS: Windows XP, Win7, Win8, Win10,for Mac OS X 10.5 or higher. Lens structure: 2G+IR Aperture: F4.5 Lens Angle: 16 Interface and signal transmission mode: Micro/ USB2.0 Storage temperature/humidity: -20 60 10-80%RH Working temperature/humidity: 0 50 30%-85%RH Operating current: 250 m Power consumption: 1.25 W App working environment: Android5.0 or above, iOS 8.0 or above WiFi implementation standard: 2.4GHz (IEEE 802.11b/g/n) Packing list: 1 x Microscope main body 1 x Bracket 1 x Instruction 1 x Calibration ruler 1 x USB data cable 1 x Installation CD (including driver software, measuring software, system components, user manual)
38MP HDMI USB Digital Industrial Microscope Camera with TF Card Video Recorder foe PCB Soldering and Component Inspection Function: Widely used in world medical research and health care, biological and botanical research, agriculture, and electronic component manufacturing. Especially suitable for LED, electronic PCB / mobile phone logic board inspection, stamping plating and electronic component inspection. HDMI USB digital industrial microscope camera + 180X C-mount lens (0.5X) + 56 LED ring light + bracket (360-degree free adjustment and rotation) Base bracket: Adjustable movement up and down, left and right, 360-degree free adjustment and rotation. Universal direction - adjustable in any direction Features: High quality, high resolution, clear images 38.0MP/16MP/14MP/2MP 1/2.3 / 1/3 inch large size Panasonic CMOS image sensor TF card video recorder Photo Model/Video Model Industrial CMOS cameras. It can display live images directly on any HDMI monitor, projector or TV. It has built-in digital crosshairs and color controls, add lines, freeze, mirror, rotate, negative in pictures Specification: Basic functions: brightness, contrast, saturation, white balance, Black and white switching, date adjustment Image adjustments: exposure, flicker suppression, sharpness, Gamma, Cb/Crgain adjustment Camera functions: digital zoom, pan/ Vertical mirroring, image freeze Storage: image capture, video recording, image preview, TF card formatting Colors, Lines, Displacement and Hiding Crosshair: You can adjust the color, line width, hide or show White balance: automatic/manual TF card interface: maximum 64G-128G HDMI camera adapter: Option 1: 38MP 3800W 60FPS, Panasonic sensor 1/2.3 Option 2: 16MP 1400W 60FPS, 1 2.3 inch Option 3: 14MP 1400W 60FPS, 1 2.3 inch Option 4: HDMI VGA input, 2MP 200W 1080P, 30FPS, 1 3 inch Option 5: HDMI 2MP 200W 1080P, 30FPS, 1 3 inch Option 6: VGA input 2.0MP 200W 1080P, 30FPS, 1 3 inch
Chemical Name : N,N-m-phenylene bismaleimide Molecular Formula: C14H8N2O4 Molecular Weight: 268.23 CAS NO. :3006-93-7 Specifications Item powder Oiled Powder Appearance Yellow or brown powder Initial Melting Point 198.0 198.0 Loss on Drying% 0.50 0.50 Ash% 0.50 0.50 Residue on 150¼m Sieve,% 0.10 0.10 Oil content,% ---- 1.0~2.0 Strength ---- ---- Physical property Density at 20â??(kg/m)3 950 950 Properties: Yellow or brown powder, soluble in THF and 1.44 share of hot acetone, insoluble in petroleum ether, chloroform,benzene and water, melting point 195 C or more. Applications: PDM as a function of rubber chemicals in rubber processing for the curing agent can also help the system can be used for peroxide curing agent, also can be used as anti-scorching agent and tackifier, both for general-purpose rubber, also applies to special rubber and rubber and use system. In natural rubber, and sulfur coordination to prevent reversion to improve the heat resistance, reduce heat, anti-aging, improve adhesion of the rubber and tire cord and the vulcanized rubber modulus. Shoulder for load tire rubber, rubber buffer layer, solve the problem of bias truck tire shoulder separation can also be used for large-size thick natural rubber products and various rubber sundries. PDM can be used as auxiliary curing agent, can significantly improve the correlation performance, increase heat resistance, suitable for high temperature curing system, reducing the compression is very obvious, but also reduce the amount of peroxide, preventing the processing of rubber in the focus burning, improve tire cord and rubber and metal bond strength. PDM is a non-sulfur vulcanizing agent for rubber cable, it can replace thiazoles, thiuram and all sulfur vulcanizing agent, solution of copper wire and copper electrical generation due to exposure to sulfur vulcanizing agent black copper sulfide contamination problems. As scorch agent for the 0.5-1.0 copies, as curing agent for the 2-3, to improve the compressive deformation of 1.5 copies, improve the adhesive strength of 0.5-5.0 copies. Package: 25kg plastic woven bag, paper with plastic film bag, kraft paper bag. Storage: Should be stored in a cool, dry, well ventilated place, packaged products should avoid direct sunlight. Notes: This product is oil based on user needs, treatment or granulation.
Electric retractable driveway bollard, automatic rising security bollard, hydraulic rising bollard comes with sleek design and pleasing aesthetics Electric retractable driveway bollard JDBRD-2, also called automatic retractable traffic bollard or automatic electric bollard, is designed to prevente unauthorized vehicles access to secured areas and provide the highest level of antiterrorism protection, which is mostly installed at the high risk places with heavy vehicle traffic flow. The unique design brings desired environmental & aesthetic enhancements to perimeter security, securing perimeter access without the sense of social disorder and active alarm measures. Electric retractable driveway bollard JDBRD-2 can be interfaced to any access control systems. In the event of a power fail, they will automatically lower into the lowest position to release the passage. One or more such electric retractable bollard can be installed and operated together or individually. Electric Retractable Driveway Bollard Featurers 1.The operation can be signaled by LEDS on the obstacle, a buzzer, traffic lights or a synchronization with a rising barrier. 2. The hydraulic pump is built in the pit of the bollard 3. Easy to transport, store and install because of the self-supporting structure and the limited weight 4. Crash-rated security bollard with integrated hydraulic pump for ease of installation, increased relaibilty and intensive use 5. Easy maintenance (can be performed by a single person) 6. Low power consumption 7. Equipped with anti-vandal function, which detects a forced command, to reset the bollard and activate an alarm 8. Ability to operate even in the event of a power failure 9. Suitable for a wide variety of HVM applications 10. Sleek design and pleasing aesthetics Electric Retractable Driveway Bollard Applications Prisons Office buildings Shopping centres Stadiums Nuclear facilities High profile buildings Pedestrian zones Electric Retractable Driveway Bollard Parameters System Control: Electric hydraulic drive Power Supply: AC220V/ AC110V ±10%, 50/60hZ (control voltage DC24V) Material : #304 stainess steel ( #201, #304, #316 stainless steel optional) Diameter: 168mm, 219mm, 273mmoptional Thickness : 6mm, 8mm, 10mm, 12mm, 15mm, 20mm optional Box Round Diameter: 370mm. Height: 990mm Through Pressure: Bearing over 80 ton container truck Outside Bollard Height: 600mm Remote Control Range: 30 meters System Power: 3.7 KW Rising Time: 3~5 seconds (adjustable) Falling Time: 3 seconds (adjustable) Working Temperature: -35 C~75 C Storage Temperature: -10 C~65 C, anti-rain, anti-dust, anti-moisture
Calcium Stearoyl Lactylate(CSL) Characters: Ivory powder or flake-shaped solid. It can be dispersed well in hot water and soluble in ethanol and hot oils and fats with pleasant caramel-like odor. It is an anionic emulsifier with HLB value of 5.1. Applications: It can be used for multiple purposes such as emulsification, aging resistance, gluten fortifying and fresh-keeping in many kinds of food such as bread, steam bread, noodle, instant noodle and dumpling. It can also be used as an emulsifier in milk, non-dairy creamer, margarine, fresh cream, meat products, animal and vegetable oils, etc. (1) Increase the springiness, toughness and gas-holding capability of dough, increase volume of the bread and steam bread and improve the organization and structure. It can react with amylose to delay and prevent the food aging. It can make it easier to remove biscuits from moulds to produce smooth appearance, distinct layers and crisp feeling in mouth. (2) It can make hot and spicy food more pliable and softer and prolong the preservation time. (6) Enhance the quality of quick frozen food, improve their organization and structure, and prevent surface cracking and filling escaping. Usage: (1) It can be directly mixed well with flour for use.�?�¯ï¿½?�¿ï¿½?�½ (2) Put this product into warm water at about 60 with proportion of 1:6 to get paste shaped substance, ten add it into flour in proportion to obtain better effect. (3) When used in non-dairy creamer or this kind of substance, it should be heated well with emulsified substance to get homogeneous emulsion before further processing. Recommended Adding Amount: 0.2~0.5 %( Calculated by Flour, Refer to GB2760-2011) Technical Index Acid value (Calculated by KOH) / (mg/g)50- 86 Ester value(Calculated by KOH) / (mg/g)125- 164 Total lactic acid (W/%)32.0- 38.0 Calcium content (W/%)4.2- 5.2 Pb / mg/kg 2 Packaging Aluminized bag vacuum packing with nitrogen inside. Net weight:20KG/CTN(5KG *4) or packaged with moisture proof paper bag, 25kg/bag.. Storage & Transportation: Sealed and stored in the low temperature, dry, cool and well-ventilated place, in order to prevent from moisture and caking. Strictly forbid storing and trasporting with materials that is explorsive, combustible or deleterious. The shelf life is 12 months.
Polyglycerol Esters of Fatty Acids(PGE) Chemical Structure: Characters: Straw yellow powder or granular solid which is easily soluble in oils and fats and soluble in organic solvents such as ethanol. It can be dispersed in hot water. Its an non-ionic surfactant with characteristics such as high temperature and acid resistance and HLB value is 7.2. Applications: This product is a kind of hydrophilic monoglyceride, and it can produce strong emulsification effect for oils and fats. 1. It can be used in margarine, butter, shortening oil and oyster sauce as emulsifier and crystal modifying additive to prevent oil-water separation and prolong the preservation period. 2 It can be used in food baking to make oils and fats dispersed more homogeneously in dough to get higher foamability and produce larger volume of product, fine and supple feeling in mouth. 3. It can be added into ice cream to make all components mixed more homogeneous, prevent forming of big ice crystal, help produce fin e and dense pore structure, enhance its expansion ratio and produce smooth and fine feeling in mouth. 4. It can be used in milk beverage as emulsifier, wetting agent, cosolvent and so on. It can also enhance flavor, aroma and color of them. 5. It can be used in meat products to prevent starch aging, shrinkage, water absorption and hardening. 6. It can be used in candies and chocolates to prevent oil-water separation and maintain a good taste. Usage: (1) Since this product is easily soluble in oils and fats, you can dissolve it in oils or fats homogeneously before further processing. (2) You can also dissolve this product in warm water at about 60 homogeneously, and then mix it with other raw materials for further use. Recommended Adding Amount: The addition maximum is 0.01% for bread and pastry, the maximum is 0.3% for ice cream. Technical Index (Refer to GB 1351092): Acid Value (mgKOH/g) 5.0 Saponification Value (mgKOH/g) 120-135 Iodine Value (g/100g) 3.0 Sulfated Ash Content % 1.0 Heavy Metal (Calculated by Pb)% 0.001 Arsenic(Calculated by As)% 0.0003 Melting Point () 53-58 Packaging Aluminized bag vacuum packing with nitrogen inside. Net weight:20KG/CTN(5KG *4) Storage & Transportation: Sealed and stored in the low temperature, dry, cool and well-ventilated place, in order to prevent from moisture and caking. Strictly forbid storing and trasporting with materials that is explorsive, combustible or deleterious. The shelf life is 12 months.
The new iPAD (intelligent Public Access Defibrillator) from CU Medical builds upon the reputation of the original iPAD for being one of the best value high quality AED's available today. Using low energy biphasic technology (similar to the Philips/Laerdal AED's) it has been designed to be simple to use, easy to maintain, affordable to buy and inexpensive to run. Innovative features and extremely high build quality is making it the AED that the industry is talking about and that other manufacturers are trying to catch up with. Supplied with everything that you need to be up and running, including a FREE carry case (worth 102 +vat) and a FREE Responder Kit the iPAD SP1 Defibrillator offers incredible value and the peace of mind that in an emergency, the only shock you'll get is the one that you want. Key Features Same set of pads for both Adult and Children. Easily switch from Adult to Child mode without changing pads. Integrated pad storage - electrode pads are stored, pre-connected, in a clear compartment on the underside of the unit. - Pads are easily removed by pulling on the exposed tab - The pads are always ready for use and easily checked â?¢ CPR Detection - the iPAD SP1 detects if the CPR is being performed when required. - If CPR is not being performed, voice prompts encourage the responder to â??perform CPRâ?? - If CPR is being performed, voice prompts encourage the responder to â??continue CPRâ?? â?¢ Visual Indicator shows at a glance. - Battery Life - Unit Status - Pad Status. Visual Indicator gives 3 months notice before pads expire. Also, warns user if pre-used electrodes are attached ! â?¢ Internal memory stores the last 5 events/3 hours of data. - Data can be transferred via the built in SD card and IrDA ports - Data can be reviewed via the CU-EX1 software (for pc) Button performs the following functions; - Allows responder to select if CPR metronome is heard during CPR - Checks for faults and errors - Provides handover information to Ambulance crew (usage time and shocks delivered) - Allows the SP1 to be programmed with CPR protocols such as compression rate, number of compressions, breaths and cycles etc, ensuring that the SP1 is always up to date - Downloads data for review - Checks the units software version Longer Shelf-Life of pads and low cost of consumables. FREE carry case 7 year warranty on unit Contents : 1x iPAD SP1 Defibrillator Fully Automatic (AED) 1x Battery 1x Defib. Pads (Adult/Child) 2x AED Starter Kits which contain: 1 Pair of tuffcut scissors, 2 Patient Wipes, 1 Compact Resuscitation Face Shield, 1 Prep Razor and 1 Pair of Gloves. All kit contents are sealed in a foil pouch to ensure sterility. 1x FREE Carry Case
Relife RL-M5T-B1 0.7-5X Continuous Zoom Trinocular HD Stereo Microscope with M-12 3800W HDMI Camera & LCD Display, Focal Length Adjustment Microscope with 10X HD Wide-angle Eyepiece Optical Coating Objective Lens Adjustable LED Light. Specification: RL-M5T-B1 Trinocular Microscope: 0.7-5X magnification /7-50 times continuous zoom 10x HD wide-angle eyepiece Large field of view, no dizziness Higher magnification, clearer Trinocular synchronous display on the same screen 1. Clear imaging and simple operation, suitable for mobile phone repair/jewelry identification/production line inspection, etc. 2. Adjustable LED Light, snap-on design, adjustable brightness, strong concentration, does not affect the operating space. 3. Supports diopter adjustment, adapts to people with different eye distances, and can observe even after taking off glasses, conforming to ergonomic design. 4. Large aperture, wide field of view, high-definition wide-angle eyepiece, long-term use is not easy to fatigue. Relife M-12 3800W HD Camera: Sensor: 1/2.33 inch Panasonic 38 megapixel CMOS sensor Pixel size: 1.335 X 1.335 um Interface: HDMI (Type A), USB (Type B), TF Card Video record resolution: 2K@30FPS/1080@60FPS HDMI resolution: 1920*1080 60 FPS can output with USB at the same time HDMI scale: Support4: 3,16:9,16:10 screen USB Output: 1920*1080/30 1280*720/30 640*480/30 320*240/30 (MJPG) Lens interface: C/CS White balance: Auto / Manual / one-button white balance, support RGB adjustable Storage: up to 64GB Input voltage: DC 5V-12V Cross Line: support 8 lines, can set color&width&position Language: English / Chinese Package includes: Option 1: RL-M5T-B1 + LCD Display+ M-12 HDMI camera 1 x Trinocular microscope 1 x Ring light 1 x HD display 1 x HD camera 1 x Microscope base Option 2: RL-M5T-B1 standard 1 x Trinocular microscope 1 x Microscope base
UM24C / UM24 USB Tester can measure voltage, current, power, temperature and other values and display on the 1.44" color LCD Screen. UM24 is no communication version, UM24C is conmmunication version by Bluetooth connection. 1.44 Inch color LCD display makes it easy and clear to read. Adjustable multi-angle view, more intelligent and convenient. Mini size and sandwich design structure, durable for use. Main functions: voltage/current/power/capacity/energy detection, quick charge recognition, data storage, etc. Wide applications: can be used to test power bank, charger, discharge load, tablet, mobile phone, etc. UM24C / UM24 Full-Color LCD Display Tester Model : UM24/UM24C Technical Parameter: Product Model:UM24/UM24C Product weight:23.47g(UM24C) 18.83(UM24) Voltage measurement range:4.50-24.00V Voltage measurement resolution:0.01V Current measurement range:0.000-3.000A Current measurement resolution:0.001A Capacity accumulation rannge:0-99999mAh Voltage measurement accuracy:(0.2%+1 digit) Energy sccumulation range:0-99999mWh Current measurement accuracy:(0.8%+3 digit) Load impedance range:1.5-9999.9 Time measurement range:0-99h59min59s Temperature range:-10 Temperature measurement error Screen brightness setting:0-5 level Auto screen off time:1-9mins Voltage graphing range:04.5-24.0V Current graphing range:0.00A-3.00A Display screen:1.44 Inch color LCD display Quick charge recognition mode:QC2.0 QC3.0 Refresh rate:2Hz Product size:71.2mmx31.8mmx12.4mm(UM24C) 71.2mmx31.8mmx11.3mm(UM24) Note: 1. UM24 is no communication version, UM24C is conmmunication version by Bluetooth connection. 2. PC software support PC window (Win 7 and above) and Phone Android 3, User manual, PC software installation instruction and PC software and Android APP 4, For Android APP : A: APP only support android 5.0 and above . B: Allow APP to do in the background, not be cleaned. C: allow APP self-starting. D: Allow APP stay after screen locked, not be cleaned. 5. about demo video and APP test and other function
1. Materials:PET + NYLON + LLDPE, NYLON + LLDPE, PET + Aluminum Foil+ NYLON + LLDPE, thickness from 120micron - 240 micron per layer 2. printed food bag Size:110 W x 235 H x 60 D mm 120micron or as customer's require 3. Printing & Logo:Your own logo and Artwork Printing Acceptable,artwork colors within 9 colors. � 4. printed food bag Applications:� � � For Food Packing -� Food Grade Compliant.. Very nice for used as food packaging, food bags, food containers,disposable food containers, food delivery bag, plastic food container, fast food packaging,dry food,food storage bag,food delivery bag,pet travel food bag,pet travel food bag,printed food bag,food paper bag,pet travel food bag,kraft printed food bag, dog food bag,food biodegradable bag,frozen food packaging,food packaging pouch,packaging food,custom food packaging,baby food pouch,stand up soft food pouch, vacuum food packaging, frozen food packaging, retort food packaging, etc� � � 5. Food Packaging Features:Food Safe, Self-stand up,Shock-resistance, Reusable, Refillable, recycable,etc 1. Our Food Safe dog food bag is safe for food and commonly used for Dried food packaging, Snacks packaging,Beef Jerky packaging,Nuts packaging, Tea packaging, Sold Drinks packaging, Coffee packaging, Tea packaging,cookies ,sandwich,biscuits and seasoning packing. 2. High quality food bag comes in a variety of sizes, colors and styles including a viewable clear window, bottom gusset, side gusset,flat bottom., with zipper, witout zip lock, Custom Bag Shaped designed is also welcome. 3. Food Packaging Pouch from fdpack are suitable for various food packaging, such as Dried food packaging, Snacks packaging,Beef Jerky packaging,Nuts packaging, Tea packaging, Sold Drinks packaging, Coffee packaging, Tea packaging,cookies ,sandwich,biscuits and seasoning packing., etc.
Seaweed" is the common name for countless species of marine plants and algae that grow in the ocean as well as in rivers, lakes, and other water bodies. Seaweeds are used in many maritime countries as a source of food, for industrial applications and as a fertiliser. The major utilisation of these plants as food is in Asia, particularly Japan, Korea and China, where seaweed cultivation has become a major industry. The present uses of seaweeds are as human foods, cosmetics, fertilisers, and for the extraction of industrial gums and chemicals. They have the potential to be used as a source of long- and short-chain chemicals with medicinal and industrial uses. Gracilaria Seaweed Gracilaria is a genus of red algae notable for its economic importance as an agarophyte, as well as its use as a food for humans and various species of shellfish. Various species within the genus are cultivated among Asia, South America, Africa and Oceania. Gracilaria is used as a food in Japanese, Hawaiian, and Filipino cuisine. In Japanese cuisine, it is called ogonori or ogo. In thePhilippines, it is called gulaman and used to make gelatin. In Jamaica, it is known as Irish moss. Main uses : The primary use of Gracilaria is as a raw material for the production of edible agar, of basic quality. This agar serves as a solidifying agent in the food industry, andmay also be eaten directly. The secondary uses of Gracilaria are as a fresh or dried vegetable, as a component in the cosmetic industry in shampoos, creams, soaps and sunscreens, as well as providing a source for nutraceutical activities , insofar as it is antimicrobial, anti-inflammatory, active against gastrointestinal disease, antiviral, anticancer, anti-pain, etc. Gracilaria is also used for water remediation in integrative mariculture, wherein Gracilaria absorbs the fish and invertebrate excretions, and enables water recycling in fish cultivation. Gracilaria is also consumed as a food additive in fish culture by utilizing its biological activities, and as fertilizer in agriculture. Nutritional value: Gracilaria contains non-digested (agar) and digested (starch) nutritional fibers (up to 50% of dry material), protein with well balanced amino acid composition (up to 20% of dry material), low fat (3%), and other minerals (including magnesium, calcium, potassium, iron, iodine), vitamins (including A, C and B12), and antioxidants (all together about 30% of dry material). Specifications - Product name : Dried gracilaria seaweed - Origin : Indonesia - Moisture : 13% -16% as request - Impurities: 1% -3% as request - Type: whole Packaging Details: - Packing : 40-60kgs/ PE bag /PP bag or as customer request, 16-17MTS/20'Feet, 25-26MTS/40'Fee. - Minimum quality : 1 container 40 feet . - Payment method : 100 % L/C at sign or T/T (50:50) - Storages : dry place
Specification Display Mode B&W mode: B. 2B, 4B, B/M Color doppler model: CFM, PD, PW Triplex: Real-time simultaneous 2D, Doppler&CFM Duplex: Real-time simultaneous 2D & Doppler Advanced Imaging technology High Precision dynamic focus imaging Space compound imaging Frequency compound imaging Pulse-inverted tissue harmonic imaging Speckle noise suppression technology Color doppler enhancement technology Multi-beam parallel processing technology Image Processing Pre-processing: 8-segment TGC              Image processing              Gain(B&W, Color)              PRF              Dynamic range              Image Enhancement              Frame average              Scanning angle              High resolusion/High frame rate              Acoustic power Post-processing: Gray map               Black/white reverse               Left/Right reverse               Up/Down reverse Functions: Cine-loop: 2036 frame cine loop memory Sotrage media: 500G massive image-storage capacity USB Zoom: Pan zoom Biopsy function Beam steering function