Multiple Protections:  Dry run protection Phase loss protection Overload/no load protection Short circuit protection Over-voltage protection Pump stalled/antiseizing protection Undervoltage protection Pump shaft rust protection Major Features: 1,Pressure control: electric contact pressure gauge or pressure switch 2,Water level control: probe or float switch 3,Multifunction display â?? visualization of: voltage, motor current, upper/lower tank status and alarms 4,Upper tank for water supply control and lower tank for drainage control 5,Operation mode: AUTO/MANUAL switch 6,Fault indication: fault tracking,last 10 fault reason display,audio/light alarms. 7,Anti-card protection,long-term non-use of the pump, 15 days to start once. 8,Setting protection current for motor overload/no-load,no-load delay restart time adjustable. 9,Automatic restart when voltage comes to normal rating after over-voltage/under-voltage protection. 10,Automatic restart after power failure recovery. 11,Time setting ON/OFF 12,Push button for adjustments and set up from display 13,Restore factory setting: press both "Overload" and "NO-Load"for 3 seconds. 14,Automatic re-starting pump from dry running,restart time range 0-999 minutes adjustable.
Multiple Protections:  Dry run protection  Phase loss protection Overload/no load protection  Short circuit protection Over-voltage protection  Pump stalled/antiseizing protection Undervoltage protection  Pump shaft rust protection Major Features: 1,Pressure control: electric contact pressure gauge or pressure switch 2,Water level control: probe or float switch 3,Multifunction display â?? visualization of: voltage, motor current, upper/lower tank status and alarms 4,Upper tank for water supply control and lower tank for drainage control 5,Operation mode: AUTO/MANUAL switch 6,Fault indication: fault tracking,last 10 fault reason display,audio/light alarms. 7,Anti-card protection,long-term non-use of the pump, 15 days to start once. 8,Setting protection current for motor overload/no-load,no-load delay restart time adjustable. 9,Automatic restart when voltage comes to normal rating after over-voltage/under-voltage protection. 10,Automatic restart after power failure recovery. 11,Time setting ON/OFF 12,Push button for adjustments and set up from display 13,Restore factory setting: press both "Overload" and "NO-Load"for 3 seconds. 14,Automatic re-starting pump from dry running,restart time range 0-999 minutes adjustable.
Multiple Protections Dry run protection Phase loss protection âOverload/no load protection â? Short circuit protection â? Over-voltage protection â? Pump stalled/antiseizing protection â? Undervoltage protection â? Pump shaft rust protection Major Features: 1,Pressure control: electric contact pressure gauge or pressure switch 2,Water level control: probe or float switch 3,Multifunction display â?? visualization of: voltage, motor current, upper/lower tank status and alarms 4,Upper tank for water supply control and lower tank for drainage control 5,Operation mode: AUTO/MANUAL switch 6,Fault indication: fault tracking,last 10 fault reason display,audio/light alarms. 7,Anti-card protection,long-term non-use of the pump, 15 days to start once. 8,Setting protection current for motor overload/no-load,no-load delay restart time adjustable. 9,Automatic restart when voltage comes to normal rating after over-voltage/under-voltage protection. 10,Automatic restart after power failure recovery. 11,Time setting ON/OFF 12,Push button for adjustments and set up from display 13,Restore factory setting: press both "Overload" and "NO-Load"for 3 seconds. 14,Automatic re-starting pump from dry running,restart time range 0-999 minutes adjustable.
We have ring cut squid products with Diameter: 1-3 cm Thickness: 1cm Weight: 10-15 grams per ring and we also provide processed squid egg products into snacks called keletek Quality: The squid is fresh and not rotten. The squid is cleaned properly and free from dirt. Squid cut into rings of the same thickness. Squid rings are free from defects, such as holes or bruises. Security: Squid is stored and transported properly to prevent contamination. Squid is free from pesticides and other dangerous chemicals. Squid meets the microbiological standards set by the importing country. Packaging: Squid is packed in clean, waterproof plastic bags or boxes. Packaging is clearly labeled with the following information: Product name Net weight Production date Expired date Country of origin Documentation: Document Health certificate Certificate of origin Commercial invoice Packing list
NawooFurni.com are supplying Wooden Interlocking Decking Tiles from Vietnam. We have 2 factories, one from the North and another from the South of Vietnam. The specification of 15 SLATS WOODEN INTERLOCKING DECKING TILES as below: - Size: 600x300X2.4 mm - Type: 12 SLATS - Material: OILED Acacia wood with plastic base in the bottom - Color: Natural color (Brown look) - Finish: Anti-slip grooves; Non-toxic paint; Oil coated wood protection, waterproof - Packing: 10pcs/carton - Outdoor Applications: such as + Floor of garden, lobby, outdoor walkways + Usage in swimming-pools, parks + Usage in bathroom and sauna - Origin: Vietnam - MOQ: 1x20ft Besides decking tiles, we are also supplying Wooden coffee set, Wooden Racks, Garden furniture and other wood products For more details, please contact us at whatsapp +84914266969 Best Regards Nawoo Furniture
TEMPO make laboratory autoclave are suitable for pharma & biotech industries, food research & quality assurance labs, agriculture research, healthcare & diagnostic labs, university, etc. Temperature range 121 C to 125 C Pressure range 15 to 22 PSI Factory set 15 PSI at 121 C Supply 230V, AC Construction : Vertical double walled design has a single chamber for steam & water. Lid, flange & bottom plate is also made of SS, all joints are argon welded. Jointless silicon gasket. Heavy duty industrial flange heater. Lid fitting pressure gauge 0-30 PSI, safety spring loaded pressure valve, steam release valve. Safety high pressure release valve. Foot lifting arrangement is provided in 121C/D/E/F, a basket made of thick stainless steel (S.S.) rod wire mesh. Technical Specification : Semi automatic system for autoclave is supplied with microprocessor based digital temperature controller with an inbuilt timer. Low water level cuts off the system with magnetic oat switch for heaterâ??s safety. Fully automatic system for autoclave is supplied with microprocessor based digital temperature controller with an inbuilt timer. Low water level cuts off the system with magnetic oat switch for heater's safety.
The A-type automatic layer cage system gets its name from its frame, which looks like the letter A. Its trapezoidal frame ensures stability. But it typically only has 3 to 4 tiers due to this shape. The Livi A-type layer chicken cage system is equipped with automatic systems for feeding, drinking, manure removal, egg collection, and environmental control. These layer chicken cages allow farmers to improve their egg production and maintain a profitable and sustainable poultry business. Brief Details Material International Q235 steel. Anti-corrosion Treatment Process Hot-dip Galvanized, Aluminum-Zinc Alloy Lifespan 15 20 Years Certificate ISO9001, ISO14001, OHSAS18001, CE, SONCAP, PVOC Production Lead Time Depending on the order quantity. Normally about 10 days for 20ft container, 15 days for a 40ft container. Supply Ability 10000 Set/Month Packing Method Normal export packing. 20ft / 40ft container. Payment Method T/T, L/C at sight Trading Method EXW, FOB, CFR, CIF
NEMA 5-15P to 14-50R for Level 1 EVs,50 Amp to 15 Amp 110 Volt RV Adapter Cord Electrical Power Plug,Heavy Duty STW 10 Gauge 20 Inch. EV Charger Optimization:Tailored exclusively for Shell EV chargers, our adapter ensures seamless compatibility with all level 1 electric vehicles. It effortlessly converts a standard 15-amp household outlet to a robust 50-amp outlet (NEMA 14-50R), catering to the unique charging needs of electric vehicles. Certifications and Safety:Prioritizing safety, our Shell NEMA 5-15P to 14-50R adapters are manufactured in accordance with UL62 CSA-C22.2. Rated for AC 90-125V,1-15A, the (UL)STW 12AWG(3.3mm²)x3C gauge wires enhance durability and reliability, providing peace of mind during every charging session.(Note When installing, use a 15-amp or lower charger setting to avoid plug damage or tripping the circuit breaker.) High-Quality Materials:Crafted with precision, the adapter features TPE fireproof insulation material and 99.99% pure 12AWG electrolytic copper wire. This high-quality construction ensures a stable current transmission and exceptional electrical conductivity, meeting the stringent demands of EV charging. Durable Build for All Conditions:Engineered for longevity, the adapter is coated with STW insulation and incorporates premium electrolytic copper. This design offers superior resistance to oxidation, wear, and heat, making it suitable for diverse environments, from indoor charging stations to withstanding the rigors of outdoor use in inclement weather conditions. Convenience and Portability:The nema 5-15p to 14-50r adapter is designed with a cord measuring 20 inches (50 cm) in length.. Beyond convenience, it allows for the hassle-free conversion of household 15-amp current to directly power 50-amp RVs, offering a practical solution for both residential and on-the-go charging needs.
Kowa TSN-553 15-45x55 PROMINAR Spotting Scope (Angled Viewing) Price:$1,299.99 SKU:EB-861613155 Brand:Nikon Availability:In Stock Shipping:Calculated at checkout Product Description Product Info for Kowa TSN-553 15-45x55 PROMINAR Spotting Scope (Angled Viewing) At less than a foot long, the 45�° angled-viewing Kowa TSN-553 15-45x55 Spotting Scope is the ideal companion wherever you go to glass. It employs the ultra-low dispersion PROMINAR fluoride glass that eliminates chromatic aberrations that, when coupled with the fully multi-coated optics and two-speed focusing mechanism, produce bright and clear tack-sharp high-contrast images with accurate color rendition for an immersive observational experience. The impressive zoom range allows you to take in a wide field of view for general viewing purposes, with the ability to draw subjects in close for more detailed observations. This version of the TSN-550 is configured with the eyepiece set at a 45�° angle relative to the optical tube to place your head in a comfortable viewing postion whether you're standing, sitting, or lying prone. Kowa TSN-553 Specs Design Viewing Angle Angled Performance Magnification 15 to 45x Objective Lens Diameter 55 mm Field of View 15x: 132.0' @ 1000 yd / 43.9 m @ 1000 m 45x: 69.0' @ 1000 yd / 23.0 m @ 1000 m Minimum Focus Distance 9.8' / 3.0 m Exit Pupil Diameter 15x: 3.7 mm 45x: 1.2 mm Eye Relief 16.5 to 16.0 mm Features Fogproof Yes, Nitrogen Filled Water Resistance Waterproof General Filter Thread 58 mm Tripod Mounting Thread 1/4"-20, 3/8"-16 Dimensions L: 10.6 x H: 6.0 x W: 2.6" / L: 26.9 x H: 15.2 x W: 6.6 cm Weight 28.5 oz / 808.0 g Packaging Info Package Weight 3.135 lb Box Dimensions (LxWxH) 12.85 x 7.4 x 3.55"
When a baby is stuffed up, the mucus from a baby's nose will affect their ability to breath, eat and sleep. Therefore, a infant aspirator is a baby must have item. The nasal aspirator for sale is compact and easy to carry. You can carry it whenever and wherever. And its detachable design is convenient for cleaning, while the anti-reflux design can prevent the mucus from back into the nose. Besides, this infant nasal aspirator uses high-quality motor to ensure low-voice, so that the baby can enjoy comfortable nasal cleaning experience in quiet environment. Is nasal aspirator useful? Nasal Aspirator First Nasal congestion in babies can be very stressful for babies, as babies may experience distress and feeding problems from a blocked nose. The impact on daily life can be disturbing, which can affect sleep patterns throughout the family. Second Thus nasal aspirator is a must-have device for every family prepared for their baby, which can help you safely and naturally clear out the unwanted fluid and mucous from babys nose. Third And its useful for you to use before the baby sleeps. It can help baby clearly breathe, easily feed and restful sleep. Fourth Besides, removing the excess fluid and mucus can help baby prevent further diseases, such as coughing, ear infections, and abdominal discomfort. After using, its easy for you to clean. How does baby nasal aspirator work? First Nasal aspirator is an efficient, safe and gentle way to remove the unwanted fluid and mucus from babys nose for clearly breathing, better sleeping and eating. Second When the motor provides suction, the tip of the nose enters the child's nose. Third These machines usually have a variety of suction settings to suit children of different ages. Fourth Usually, we recommend that parents should keep babys body flat, letting her chin tilt up slightly and put a few drops of normal saline in babys each nostril to liquefy secretions, then use the nasal aspirator. As a professional nasal aspirator supplier, JOYSTAR provides sterilizer and dryer, electric breast milk pump, breast feeding products, newborn nose cleaner, nasal suction, etc. For more, please feel free to contact us!
Product Description The Gaggia Anima Prestige is a super-automatic espresso machine that wraps over 75 years of espresso making experience in an elegant design that blends modernity and tradition. With a simple and intuitive programming menu, the ability to brew milk drinks with one touch, and time tested innovations that enhance the quality of your brewing experience, the Anima yearns to make a barista out of you. The Anima brews with a powerful 15 bar pump and Gaggia's innovative removable brew group. There are two dedicated drink buttons located on the front of the machine for espresso and espresso lungo and each can be programmed to your liking. The Gaggia Optiaroma system lets you brew using 6.5 - 11.5 grams of coffee (in five increments). You can also adjust brew temperature (Min/177.5 �°F, Med/182.9 �°F, Max/184.5 �°F), beverage volume, and pre-infusion. These settings can then be saved, allowing you to brew a drink to your exact specifications at the push of a button. Coffee is ground fresh for every brew cycle with the built-in ceramic burr grinder that can be set to one of five settings depending on the roast of your beans. The machine is also equipped with the Gaggia Adapting system which adjusts the grinding process to make sure that the correct amount of coffee is ground for your espresso. Should you prefer to use pre-ground coffee instead, the grinder can be bypassed entirely using the bypass doser to fill the brew group directly.
Empty Coffee Capsules Introducing the future of sustainable coffee brewing â?? empty coffee capsules made from PLA! GoodBioPak proudly presents a revolutionary solution for coffee enthusiasts and businesses alike. Our empty coffee pods , crafted from plant-based PLA, offer a guilt-free and eco-friendly way to enjoy your favorite brews. As one of leading empty coffee capsules manufacturers, GoodBioPak specializes in wholesale supplies of plastic-free biodegradable capsules. Discover the perfect combination of convenience and sustainability with our empty coffee capsules, and join us in shaping a greener coffee experience. Specifications of Empty Coffee Capsules Title PLA Biodegradable Coffee Capsules Product Name Coffee Capsules for Nespresso Application Coffee/Tea etc Packing Material PLA (Polylactic Acid) Top Diameter 37mm Volume 1.95±0.1g Size 15 ml Color Customized MOQ 1,000,000 pcs Supply Ability 10,000,000 Sets/Month Package Customized Payment TT Shipment Port Shanghai Delivery Time About 25 to 45 days according to different quantity Features food contact safe biodegradable compostable disposable eco-friendly sustainable sturdy
Double Side Rail Hole Chamfering Kit The double chamfer is used for chamfering the holes on the waist of railway rail. The structure of the bilateral chamfering device: It has a door frame, the left and right holder through a set of four bar linkage hinge, and equipped with upper locking lever handle, install left axle shaft sleeve of the bottom of the left bracket, left axis right side is equipped with disc blade, left left end shaft with a ratchet wrench, right shaft are installed in the shaft sleeve from the lower pole of the right holder, the right shaft suits a compression spring, right left end shaft is equipped with the disc blade, The right end of the right axle is fitted with a ratchet wrench. The double-sided chamfering device has the advantages of simple structure, convenient operation and high working efficiency. The blade is disk-shaped, the blade on the whole circumference is sharp and wear-resistant, and the service life is long. Specification Model LJ-DJQ-S Type Rail Chamfering Tool Material Stainless Steel Dimensions (L x W x H) 40*15 cm Chamfer Diameter �?31-�?32 Chamfering Size 1�?45�°, 2.5�?45�° Application 43kg/m,50kg/m,60kg/m rail Weight 2.8KG
Double Side Rail Hole Chamfering Kit The double chamfer is used for chamfering the holes on the waist of railway rail. The structure of the bilateral chamfering device: It has a door frame, the left and right holder through a set of four bar linkage hinge, and equipped with upper locking lever handle, install left axle shaft sleeve of the bottom of the left bracket, left axis right side is equipped with disc blade, left left end shaft with a ratchet wrench, right shaft are installed in the shaft sleeve from the lower pole of the right holder, the right shaft suits a compression spring, right left end shaft is equipped with the disc blade, The right end of the right axle is fitted with a ratchet wrench. The double-sided chamfering device has the advantages of simple structure, convenient operation and high working efficiency. The blade is disk-shaped, the blade on the whole circumference is sharp and wear-resistant, and the service life is long. Specification Model LJ-DJQ-S Type Rail Chamfering Tool Material Stainless Steel Dimensions (L x W x H) 40*15 cm Chamfer Diameter 31-?32 Chamfering Size 145°, 2.5 45° Application 43kg/m,50kg/m,60kg/m rail Weight 2.8KG
A mixture of concrete-raw materials which practically packaged in red bag as a solution for pouring areas that are difficult to reached by truck mixers, such as projects in remote areas, the completion of building rooftops, and to build home kitchen. To produce 1 m3 concrete, require 43 bags of Beton Instan�®. K250: for foundation, slab, beam,or column on 1-3 storeys building. (This guidance is flexible and can be adjusted refer to your design plan) > PRODUCT DETAILS - Prices shown are per 1 set (contains 20 bags) and varied by region - Minimum order 1 set - 1 m3 = 43 bags of Beton Instan - Mix with water 4-5 liters per bag > HOW TO CALCULATE VOLUME Beton Instan volume = Length (m) x Width (m) x Height or Thickness (m) x 43 bags E.g; Pouring area P (4 m), L (1 m), T (10 cm) Beton Instan Volume = 4 m x 1 m x 0.1 m x 43 bags = 17.2 bags (rounded to 18 bags) > HOW TO ORDER 1. MUST TO contact the admin to confirm the avalability of product and delivery schedule before ordering 2. Select the strength and area according to your needs and project location 3. Input the required volume then complete your transaction 4. After the order received by Jayamix by SCG, concrete will be processed and delivered refer to the agreed schedule. > SPECIFICATIONS Brand: Jayamix by SCG Function: Pouring Material: Cement, Split, Sand, Admixture Product Dimension: 50 x 70 x 15 cm per zak Weight: 50 kg per bag
Product Description The DeLonghi EC155 is the most affordable pump-driven semi-automatic espresso machine we offer. This little powerhouse packs 15 bars of pump pressure, so getting a good extraction is simple and fast. Delonghi patented Sempre Crema Filter helps ensure you will get a layer of rich crema on your shots, and the EC155 also comes with a filter basket designed for use with ESE (Easy Serve Espresso) pods to make brewing even simpler. A dial on the front of the machine controls all of the functions on the DeLonghi EC155, from brewing to steaming to hot water. For making cappuccinos, lattes, and other espresso-based milk drinks, the EC155 features a steam wand with an attachment that makes steaming and frothing milk a breeze. Maintenance is also easy, thanks to a removable 35 oz water reservoir, drip tray, and straightforward cleaning cycles. Features & Benefits: Coffee Versatile Portafilter The DeLonghi EC155 lets you create delicious espresso 2 different ways. You can use the Sempre Crema Filter to brew using your favorite ground coffee beans, and depend on a smooth layer of crema every time you brew. The EC155 also comes with a special filter basket for use with ESE pods for added convenienceâ??no grinding, dosing, or tamping needed. Powerful Pump A dependable pump means consistent, well-extracted espresso shots and lots of steam. The DeLonghi EC155 features a powerful 15 bar pump to create a consistent extraction every time. Itâ??s also self-priming rare feature for a machine at this price point. This feature means you donot have to worry about complicated set-up when you first get the machine or after a long period without being used.
Product Description DeLonghi's Dedica EC680 is an ideal entry level espresso machine. thoughtfully designed to satisfy the needs and wants of less experienced baristas. At a mere 6" wide, you'll have no trouble finding a spot for the Dedica on your countertop, while the professional stainless steel exterior and chrome accents compliment the decor of the modern kitchen. Internally the Dedica brews with a 15 bar self-priming vibration pump and a high speed thermoblock boiler. The thermoblock design allows for rapid heating with the machine ready to brew only 40 seconds after turning it on. This also guarantees high speed steaming with a scant 15 second transition time between brewing and frothing. The machine features two brew buttons for single and double shots of espresso. The pressurized portafilter includes three styles of filter baskets, single, double, and pod to allow for brewing with both ground coffee and ESE pods. Pressurized portafilters help to take the guess work out of brewing for a more consistent result. Each machine includes a dual purpose scoop and tamper to assist with filling the portafilter. Crafting milk drinks utilizes the manual cappuccino system to texture perfect milk foam for favorites like lattes and cappuccinos. Steaming is easy, simple press the steam button twice and ensure that the steam knob is in the steaming position. The machine can also dispense hot water for drinks like tea and cocoa by repositiong the steam knob to the hot water position. For maintenance the Dedica can be programmed with one of three water hardness settings and features an automatic descaling alert when the machine is ready to be descaled. Lastly, the water reservoir can be fitted with a DeLonghi water filter to slow mineral buildup and preserve the integrity of your espresso's flavor.
Product Description MASTER THE ELEMENTS FULL AERO To achieve fast rides from full aerodynamic performance itâ??s important that both the bike and the rider are as aerodynamically efficient as possible. At Bianchi, while we feed the learnings from research and development across all ranges into new models, the ARIA advanced aerodynamic design has been heavily inspired by our extensive wind-tunnel testing and cooperation with Bianchi pro riders. For the bike, full aerodynamic performance means the shape of the tubes profiles and their structural combination to cheat the wind resistance, resulting in the lowest drag possible. For the rider, full aerodynamic performance means creating a position that allows for the least air resistance this can only be achieved with a frame and fork geometry that allows for an advanced tuck position, and an ideal racing geometry. Aero frame plus aero rider position equals Full Aero. CARBON AERO SEATPOST Aero seatpost with integrated look and adjustable head clamp offset 25mm or -10mm SPECIFICATION FRAME ARIA DISC CARBON, MECHANICAL/ELECTRONIC SHIFTING COMPATIBLE, PRESSFIT 86,5X41MM BB, HEAD TUBE 1.1/4"-1.1/8", INTEGRATED SEAT CLAMP, FULL CARBON DROPOUT, FLAT MOUNT, THRU AXLE 12X142MM, SIZES 44-47-50-53-55-57-59-61CM FORK BIANCHI FULL CARBON DISC 1.1/4">1.1/8", THRU AXLE 12X100MM HEADSET FSA ORBIT C-33, NO.44E, 1.1/8">1.1/4" SHIFTERS SHIMANO 105 ST-R7020 2X11SP, HYDRAULIC DISCBRAKE, SHIMANO 105 ST-R7025 2X11SP SMALLER LEVER SIZE FOR SIZES 44/53CM REAR DERAILLEUR SHIMANO 105 11SP RD-R7000 SS 11SP FRONT DERAILLEUR SHIMANO 105 FD-R7000-L CRANKSET SHIMANO 105 FC-R7000 50X34T, HOLLOWTECH II, CRANK LENGTH: 165MM-44CM, 170MM-47/53CM, 172.5MM-55/59CM, 175MM-61CM BB SHIMANO SM-BB72-41B CHAIN KMC X11-1 EPT FINISH, 11SP SPROCKET SHIMANO 105 CS-R7000 11SP, 11-12-13-14-15-17-19-21-24-27-30T BRAKES SHIMANO BR-RS505, FLAT MOUNT, HYDRAULIC DISC BRAKE BRAKE LEVERS INCLUDED W/SHIFTERS WHEELS FULCRUM RACING 818 DISC BRAKE TIRE VITTORIA ZAFFIRO PRO V 700X28 STEM REPARTO CORSE 3D FORGED ALLOY 6061, RISE -8�°, 1.1/8", EXT: 70MM-44CM, 90MM-47/50CM, 100MM-53CM, 110MM-55/57CM, 120MM-59CM, 130MM-61CM HANDLEBAR REPARTO CORSE AERO , ALLOY 6061 DIAM. 31,8MM, REACH 74MM, DROP 116MM, SIZE: 400MM-44/53CM, 420MM-55/59CM, 440MM-61CM GRIPS LA SPIRALE RIBBON CORK SEATPOST ARIA FULL CARBON AERO, CLAMP WITH ALLOY HEAD ADJUSTABLE AND REVERSIBLE +/- 35MM; LENGTH: 250MM-44CM, 300MM-47/50CM, 350MM-53/61CM SADDLE SELLE ROYAL SETA S1, STEEL RAIL, 278X144MM ROTOR SHIMANO SM-RT70, DIAM. 160MM
Perkins Diesel Engine, Diesel Generator set 50HZ/1500RPM, 380/220V, 400/230V, 415/240V can be adjustable, Open Type, weatherproof type or soundproof type, trailer type and so on. Also have 60HZ/1800RPM, voltage is 220/127V, 380/220V, 440/254V can be option There are Perkins from China, UK, USA and india, all depend on the required model. ATS can be option Controller brand: UK Deepsea, Czech ComAp, Denmark DEIF, Smartgen China Generator Standard Compose: Meet the environmental temperature 40 water tank radiator, Driving belt cooling fans, with fan safety shield 24 V charging generators Generator: Single bearing generator, IP23 Grading Protection, H Insulation degree Shock absorber Dry air filter, Fuel filter, Oil filter Power output circuit breaker Standard control panel 12 V battery and battery connection cables Battery Charger Exhaust pipe, Bellows, Flange, Muffler set 8 hours base tank Documents and Manuals Generator set Genset Model AP1100 Rating Power (KW/KVA) 800/1000 Standby Power(KW/KVA) 880/1100 Rating Ammeter(A) 1519 Diesel Engine Engine Model 4008TAG2 Prime Power(KW) 899 Standby Power(KW) 985 Bore X Stroke (mm) 160X190 Number of Cylinder & Configuration 8 in line Displacement (l) 30.6 Compression Ratio 13.6:1 Aspiration Turbocharged & After-cooled Max. intake depression(kPa) 6 Combustion air Volume(m³/min) 70 Max. Exhaust back Pressure(kPa) 10 Exhaust Gas Flow(m³/min) 201 Max. Exhaust Gas Temperature() 485 Cooling Water cooled with Radiator Fan cooling air flow(m³/min) 1074 Total Coolant capacity(l) 188 Max. temperature of coolant() 93 Max. permissible oil temp.() 105 Total oil capacity(l) 166 Rating Fuel Consumption(l/h) 215 Governing Type Electrics Governor Alternator Rating Voltage(V) 380/220 (adjustment) Alternator Model TAL-A49-E Rating Capacity(KW/KVA) 800/1000 Eff.% 94.2% Power Factor 0.8 lagged Exciting type Brushless PMG exciter, AVR Voltage regulation ±0.5% No. of Phase 3 phase 4 wire Enclosure Class IP23 Class of Insulation H Battery Rating Capacity(AH) 4X150AH 12V Generator set dimension (LXWXH) 5300X1870X2500 mm Weight (kg) 7900 FAQ Q: Do you offer OEM service? A: Yes Q: What is your payment term? A: 30% T/T in advance, 70% balance when receiving B/L copy, Or 100% irrevocable L/C at sight. Q: What is your lead time? A: About 15-25 days after receiving advance deposit or original L/C. Q: What certificates do you have? A: We have ISO And we can apply for specific certificates for different countries such as SONCAP for Nigeria, COI for Iran, SASO for Saudi Arabia, etc. Q: What warranty do you provide? A: One year or 1200hours running whichever occurs first, during the guarantee period, we will supply free of the easily damaged parts for the possible problems except for the incorrect operation. After expiration, we supply cost spare parts for Genset maintenance.
Application The FSR-01 Shrink Force and Ratio Tester serves the purpose of measuring both the shrinking forces and shrinkage ratio of heat shrinkable films. These films are typically created through extrusion and stretching (hot drawing) during their manufacturing process, retaining this stretched state even after cooling. When the heat shrinkable film is reheated to the temperature at which the initial stress was introduced and subsequently fixed during its production, this stress is released, causing the film to contract or "shrink back." Depending on the specific manufacturing treatment applied, the film can be categorized as either biaxially oriented (stretched in two directions) or uniaxially oriented (stretched in one direction). Test Process 1. A well-insulated air oven is heated to the set temperature. The two samples are placed separately on two test stations, for shrinkage rate and shrink/contraction force testing. 2. A temperature probe is located to measuring area, to give result as reference temp. The air oven is driven down automatically to cover the sample area. The force and shrink rate are to be measured and the shrinkage temperature is reached when the maximum shrinking force is attained. 3. When this force has decreased by around 15%~30%, the air oven is lifted and time is recorded. 4. The assessment of shrinkage ratio is performed at the mean time. Technical Features 1. PLC Control and HMI Touch Screen: ensuring industrial-level stability. 2. Well-Insulated Air Oven: The air oven is excellently insulated and capable of automatic lowering and lifting, enhancing the precision of the testing. 3. Non-Contact Shrink Ratio Measurement: accomplished through a noncontact method, improving accuracy and reliability. 4. Real-Time Display:including shrinking force, contracting force, and shrinkage ratio, allowing for immediate analysis and monitoring. 5. Elimination of Interference Factors: Irrelevant interference factors like friction and cool air are effectively eliminated, ensuring the accuracy of the results. 6. Stable Heating System: The heating system is stable and well-balanced, maintaining consistent and controlled test conditions. 7. Easy Sample Loading: Sample loading is made easy, streamlining the testing process and reducing setup time. 8. High-Resolution Sensors: The system is equipped with high-resolution force transducers and thermometers, guaranteeing precise measurements. 9. Connectivity and Software:(optional) It includes an RS232 port for data connectivity and offers optional professional software for advanced data analysis and reporting capabilities. Standards: ISO 14616, DIN 53369 Main Parameters Force Range 5 N ( or as required) Accuracy ±0.5% Resolution 0.001N Displacement Range 0.1 ~ 95 mm Accuracy ±0.1 mm Temperature Range Ambient ~ 210C Accuracy ±0.5C No. of Specimens 2 Sample size 110*15 mm, L*W Power Supply 220V 50Hz
