Hydraulic Gate Valve Hydraulic gate valves are designed, manufactured, and tested in accordance with API Spec. 6A to ensure reliable and efficient operation in a variety of applications. The valves feature linear double-acting actuators that guarantee rapid opening in just 30 seconds, providing positive control during operations. Product Description Hydraulic gate valves are designed, manufactured, and tested in accordance with API Spec. 6A to ensure reliable and efficient operation in a variety of applications. The valves feature linear double-acting actuators that guarantee rapid opening in just 30 seconds, providing positive control during operations. API 6A Hydraulic Gate Valves are used primarily in the oil and gas industry for controlling the flow of fluids, such as crude oil and natural gas, in high-pressure and high-temperature environments. They are actuated using hydraulic systems, making them suitable for remote or automated operations. Features 1. The integral forging of the valve body, along with the use of carbide alloy on the sealing surface and seats, enhances wear resistance, and corrosion resistance, and extends the service life of the valve. 2. The metal-to-metal sealing between the gate and seat, seat and body, bonnet seal, and stem backseat provides a secure, long-lasting seal. 3. The balancing lower stem of the valve allows it to stay in position even in the absence of hydraulic power, and the double-acting actuator requires hydraulic power to both open and close. Should a failure of hydraulic power occur, this valve will remain in position. 4. Balancing stem that allows the gate to stay in position unless hydraulic power is supplied to the actuator to positively open or close valve 5. Two spring-loaded, pressure-energized, nonelastomeric lip seals provide low-pressure sealing and protect against particle intrusion, while the stem seal design is capable of handling a wide range of pressures, temperatures, and fluids. 6. Stem seal design that covers a wide range of pressures, temperatures, and fluids encountered in wellhead and manifolds service metal-to-metal bonnet seal. 7. A manual locking screw maintains the gate in the closed position without any operating pressure, and socket head cap screws are used to tie down the actuator head flanges, reducing exposure to corrosive environments.
Titanium electrode plate for water treatment is a platinum group noble metal oxide with high electrocatalytic performance, strong oxidation resistance and good electrical conductivity coated on a pure titanium substrate, which is an insoluble anode. Product parameters Product name: Titanium electrode plate for water treatment Brand: TOPTITECH Product base material: Gr1 pure titanium Product coating: Ru/Ir/Pt (ruthenium iridium platinum) Product process: nano coating - high temperature sintering Specifications: customized according to customer requirements Product performance: 1. It has excellent properties such as corrosion resistance, high temperature resistance, high strength, easy guarantee of filtration accuracy, and easy regeneration; The plates is sintered at high temperature, so the surface particles are not easy to fall off; in the air the temperature in use can reach 300�°C; 2. It is suitable for filtering various corrosive media, such as: weak hydrochloric acid, sulfuric acid, hydroxide, sea water, aqua regia, and chloride solutions such as iron, copper, and sodium; 3. It has excellent mechanical properties, can be machined for cutting, welding, etc., has high compressive strength, and the internal pressure breaking strength is as high as 0.3MPa; 4. The regeneration method is simple and can be reused after regeneration. Applications 1.Production of sodium hypochlorite via electrolysis in the chlorate and chlor-alkali industries In the production of chlor-alkali, pure saturated salt water is used as electrolytic solution, titanium electrode is used as anode, and asbestos wool attached to iron mesh is used as cathode. The anode chamber produces chlorine gas, and the cathode chamber produces hydrogen gas and sodium hydroxide. After purification, it is widely used in various industries. in industrial production. 2. Electrolyzed functional water Water that has been artificially treated to achieve a variety of beneficial purposes is referred to as functional water. With its high practicability, good sterilization effect, and lack of secondary pollution, electrolyzed water is a well-liked sterilization treatment technique. Titanium electrodes, which are frequently used in electrolyzed water machines, are used to electrolyze drinking water or trace salt water in order to generate functional water. 3. Cathodic protection In the ocean, ship hull, bridge and other steel use environments, due to the corrosion of impurities in the steel and micro-batteries, coupled with the complex natural environment, although corrosion-resistant alloy steel is selected and the thickness of the material is increased to coat excellent corrosion-resistant paint, these The corrosion of structures is still very serious, which poses a great threat to safe production, and cathodic protection is a convenient and important measure to effectively protect permanent steel structures in the ocean.
Porous titanium foam sintered plate is also called metal powder sintered porous microporous filter material. It is a new type of deep separation and fine filter element made of spherical or irregular metal or alloy powder, which is mixed, pressed and sintered by powder metallurgy. Porous titanium foam sintered plate is a versatile and effective material in the field of heat transfer and heat dissipation. Its high thermal conductivity, resistance to corrosion and oxidation, low weight, and high strength make it a popular choice for a wide range of applications across various industries. Product parameters Name: Porous titanium foam sintered plate Brand: TOPTITECH Filtration accuracy: 0.2um-100um Applicable temperature: 300â?? Size: Customized Product features 1. The material has different pore sizes and filtration precision, the channels are criss-crossed, and the filtration and separation efficiency is high. 2. High temperature resistance and short heat resistance. Suitable for use in the temperature range of 300�°C. 3. Anti-corrosion. It is suitable for deep separation and fine filtration of corrosive media such as acid and alkali. 4. Has certain metal or alloy properties. Energy absorption, noise reduction, heat resistance, shock resistance, cushioning, heat conduction, electrical conduction, high strength and good toughness. Suitable for high pressure environment. Weldable and simple machining, easy loading and unloading. 5. Stable pore shape and uniform distribution ensure stable filtration performance. The regeneration performance is good, and the filtration performance recovers more than 90% after regeneration. Application range Petroleum, chemical industry, metallurgy, aviation, electronics, electric power, pharmaceuticals, environmental protection, atomic energy, nuclear industry, natural gas, refractory materials, fire-combat equipment, etc. Such as: seawater desalination, sewage treatment, transformer oil, lubricating oil, fuel oil and other oils, organic solutions, inorganic solutions, medicinal liquids, beverages and other liquids; coarse and fine filtration; various gases, steam dust removal, sterilization, removal of oil mist ; Noise reduction, flame retardant, heat resistance, catalytic reaction, catalyst filtration, gas buffer, sweating and cooling, porous electrode, antifreeze device manufacturing, etc. Package and Shipment 1.� Titanium Plate Sintered Filters� are usually packed in cartons, wrapped in soft film,� fixed in the box filled with industrial foam cotton, and the outer baler is packed with plastic� bags no damage during� transportation. 2. Wooden box export packaging can also be customized. The foam cotton can be filled and fixed, the external box is sealed, the bottom is specified, and the whole packaging is processed, and the goods can be delivered to the designated place of the customer without damage.
High Efficiency Sunflower Seeds Roasting Machine, Nuts Roaster Equipment Microwave industrial tunnel baking and puffing equipment, roasting equipment, microwave baking equipment,continuous microwave roasting machine,industrial microwave roasting baking machine , drying and sterilization machinery, widely used in the peanuts ,sunflower seeds,sesame seeds, wheat, melon seeds, peanuts, corn, soybeans, walnuts, areca-nuts,almonds, chestnuts, pistachios, cashews etc roasting.Compared with the traditional production methods, microwave baking foods are crispy and delicious, puffed full of particles, natural color, beautiful appearance, and has insecticidal sterilization. 1 While microwave equipment baking, along with the bactericidal effect. Microwave sterilization reflect in the dual role of thermal effects and non-thermal effects , compared to the conventional temperature sterilization ,can obtain a satisfactory sterilization in lower temperatures and a very short time.The sterilization temperature is around 80ºC in general,the processing time is 3~5 minutes,and can maintain its nutrients. 2 Easy to operate. Microwave power and the conveyor speed can be sleepless adjustment, there is no thermal inertia, can open and stop at an time, easy to control,improve the production environment.Microwave equipment, no waste heat radiation, no dust, no noise, no pollution, easy to implement the testing standards of food hygiene.  3 The roasting effect is obvious. The purpose of rapid microwave heating effect, make the material internal water molecules vaporize rapidly,then reach the purpose of puffing. 4 Low-temperature sterilization, less loss of nutrients.Retain vitamin C,conventional heating treatment for fruits and vegetables is 46% ~ 50%, but the microwave can reach 60%~90%.Retain vitamin A,conventional heating treatment is 58%,but the microwave can reach 84%,and does not affect the original flavor, is a good method for deep processing of fruits&vegetables and get green foods. Power supply 380V 50HZ three-phase five-wire Microwave Output Frequency 2450±50MHz Microwave input apparent power 28KVA Microwave output power 20KW Microwave power adjustment range 0-20KW(adjustable) Ambient temperature -5-40C Relative humidity 80%,Surrounding environment:no corrosive gas, conductive dust and explosive gas Overall dimension(L*W*H)  9400*850*2050 mm Transmission speed 0-10m/min(adjustable) Height of the inlet and outlet 60 mm Microwave leak accord with a country GB10436-89 standards(
The Quick Details of Pe100 Water Pipe : Place of Origin: Luoyang ,China Material: HDPE Brand name: GUORUNXINCAI Material: HDPE Diameter Nominal: 20-800mm Wall Thickness: 2.3-57.2mm Pressure: 0.6-1.6Mpa Standard: GB/T 13663-2000 Pe100 Water Pipes' diameter,length and other types of indexes can be based on clients' requirement. IRRIGATION PIPE of High Density Polyethylene High-density polyethylene pipe(HDPE pipe) is made from high density polyethylene as the main raw material, adding a small amount of antioxidants, Anti-UV absorbers and pigments. Pe100 Water Pipes' main characteristics: 1. Long-life-span Pe100 Water Pipes can be used for more than 50 years under normal condition 2. Good sanitary performance Pe100 Water Pipes' material is non-toxic, does not scale. It is not easy to form dirt, and avoids secondary pollution of drinking water 3. Good corrosion resistance Pe100 Water Pipes can resist variety of chemical mediator except few oxidants 4. Pe100 Water Pipes are with Good crack growth resistance 5.Pe100 Water Pipes are with Little coefficient of friction and low flow resistance 6.Pe100 Water Pipes are with Excellent wear resistance Its wear resistance is 4 times higher than steel pipe under normal conditions 7. Good solderability Pe100 Water Pipes' interface strength is higher than the pipe body 8. Pe100 Water Pipes are with Fine flexibility and anti-scratch ability 9. Low cost Pe100 Water Pipes can reduce the cost of project substantially The Applications of Pe100 Water Pipes: Guorun Pe100 Water Pipes can be widely applied to below fields: 1. City and town water supply 2. To transport natural gas & coal gas 3. Food & chemical industry 4. To transport ore & mud 5. To replace cement pipe, cast iron pipe & steel pipe 6. Landscaping pipeline Pe100 Water Pipes outer diameter is from 20 mm to 800 mm, and its wall thickness is 2.3 mm to 57.2 mm mainly.
En590 10ppm, jet fuel jp54, d2 diesel gas oil l 0.2 62 fost 305 82, liquidified natural gas lng, jet fuel jpa1, petcoke, gasoline octane, virgin fuel d6, fertilizer, aluminum.Seller representative, export
With the continuous development of science and technology, cryogenic storage technology is increasingly used in many fields such as biomedicine, scientific research experiments and industry. Among them, liquid nitrogen supply tanks are widely used in these fields because of their more durable and stable low temperature conditions than traditional liquid nitrogen containers. Liquid nitrogen supply tanks are mainly used to store liquid nitrogen and replenish liquid nitrogen for normal pressure liquid nitrogen tanks, gas phase liquid nitrogen tanks, etc. 1. Double safety protection measures: equipped with double safety automatic control valves to control the inner tank pressure below 0.1mpa, providing double protection to ensure safe use. 2. Continuous pressurization and drainage: It has the uninterrupted nature of continuous pressurization and continuous drainage to improve the liquid supply efficiency. 3. Convenient to move: It is equipped with high-load-bearing mobile casters for quick movement. 4. Easy to operate: Special ultra-low temperature inlet and outlet valves, booster valves, drain valves, etc. are easier to operate, durable, and beautiful. 5. Durable material: The outer shell and the inner tank are made of 304 stainless steel, with good vacuum and low temperature performance. Liquid nitrogen supply tanks have become one of the preferred equipment for liquid nitrogen storage through their unique design and wide range of applications. It not only meets special needs, ensures the stability of liquid nitrogen delivery, and ensures the normal operation of equipment, but also has a wide range of applications in scientific research, medical and agricultural fields, providing a better freezing environment and ensuring the survival and quality of frozen samples.
Pre Painted Aluminum Sheet Painted aluminum panels are the product of a high-tech process that enhances the properties of aluminum. Painted aluminum has an outstanding aesthetic effect and can be used for a variety of applications such as cladding, roofing, insulation panels, ventilation ducts and roller shutters. We guarantee extreme durability in both outdoor and indoor conditions. Advantages Lightweight and durable Aluminum is essentially a lightweight material. This makes it ideal for automobiles as it improves fuel economy and maneuverability. Pre-painted aluminum, such as our 3105 alloy, has a high-quality, wear-resistant surface. We use specialized equipment and paint compositions to protect against UV rays. As a result, our panels are protected against premature fading and chalking, thus maintaining a longer-lasting color and shine. Our products are also naturally corrosion-resistant, making them more resistant to extreme weather, temperatures and harsh environments. Versatility Pre-painted aluminum offers outstanding versatility. It is highly machinable, formable and flexible. It also has the ability to be welded using both gas and conventional arc methods. Environmentally friendly Studies have shown that pre-painted aluminum is environmentally superior to post-painted metal . A wide range of surface textures and colors, combined with a high level of recyclability, make it popular for sustainable design. In addition, it promotes more efficient fuel and resource utilization, making it a more environmentally friendly choice. Uses of Painted Aluminum Panels Enclosed trailers Racing car bodies Residential facades Pontoon boat side panels Recreational vehicles Storefronts and commercial facades
The melting point range of SASOLWAX S682 is between 62 and 66, with a needle penetration of 44 (1/10mm) and a kinematic viscosity of 10 (mm²/ s) . This model is very similar to China's microcrystalline wax 70#, with a drop melting point of 70.2, a penetration rate of 21.4 (1/10mm), and a kinematic viscosity of approximately 7 (mm²/s). Because microcrystalline wax in China belongs to hard wax, the penetration may be slightly lower. If you are looking for a similar product to this SASOLWAX S682 micro wax, you can contact us. For example, you can use 70 # microwax in jar candles to improve candle performance. Microcrystalline wax is a waxy substance that is solid at room temperature and has a high melting point. It is made up of long-chain hydrocarbons and is derived from crude oil or natural gas. Microwax is often used in various industrial and cosmetic applications, such as in the production of candles, cosmetics, and polishes. Microwax is different from other types of wax because of its unique properties, such as its high melting point, low viscosity, and good hardness. These properties make it useful in applications where a wax with a high melting point and good hardness is required. In addition to its industrial and cosmetic uses, microcrystalline wax is also used in the food industry as a coating for fruits and vegetables to extend their shelf life. It is also used in the pharmaceutical industry as a binder and coating agent for tablets and capsules. What are the common types of microcrystalline wax produced by Germany's Sasol? Sasolwax 682, Sasolwax 3971, Sasolwax 2528, Sasolwax 1365. Which is better, Sasol or Chinese microcrystalline wax? The main focus is on the application scenarios of the product, there is no best, only the most appropriate. Because the properties of microcrystalline waxes are similar.
Titanium pipes for exhaust and downpipe applications are highly sought after due to their excellent properties, including high strength, lightweight design, corrosion resistance, and heat endurance. Specifications: Material: Gr1 Purity: >99.6% Outer Diameter (OD): 8mm Wall Thickness: 1.2mm Leg Length: 400mm (Customizable) Bend Angle: 90�° Surface Finish: Polished Features Superior Strength and Durability: Titanium pipes exhibit a remarkable strength-to-weight ratio, making them incredibly strong and durable. This property allows them to withstand high-pressure conditions, extreme temperatures, and mechanical stresses associated with exhaust systems, ensuring long-lasting performance. Lightweight Design: Titanium is renowned for its exceptional lightweight nature, which contributes to reduced overall weight in vehicles and aircraft. The lighter weight of titanium pipes for exhaust and downpipe applications not only improves fuel efficiency but also enhances the handling and performance of vehicles. Corrosion Resistance: Titanium is highly resistant to corrosion, making it an ideal choice for exhaust and downpipe systems exposed to harsh environments, such as corrosive gases, high temperatures, and moisture. This corrosion resistance ensures the longevity and reliability of the pipes, even in challenging conditions. Improved Engine Performance: Titanium pipes offer excellent exhaust gas flow characteristics, reducing backpressure and improving engine performance. The enhanced flow efficiency contributes to increased horsepower, torque, and overall engine responsiveness, providing a thrilling driving experience. Aesthetic Appeal: In addition to their exceptional performance, titanium pipes often feature a polished or brushed surface finish, adding an aesthetic appeal to the exhaust and downpipe systems. The sleek and sophisticated appearance of titanium pipes enhances the overall visual appeal of vehicles and aircraft. Applications: Automotive Industry Downpipes Motorsports Performance Upgrades Aerospace Industry Jet Engines Energy Sector Power Generation Marine Industry Marine Exhaust Systems
Chicken manure dryer is suitable to be used in large, medium and small-sized chicken house and the areas where the breeding industry is developed. This kind of rotary dryer is designed for high moisture material, such as more than 65% moisture. The same as Chicken manure, cow manure or pig manure. This dryer is different from other normal dryer, there is a inner mixing shaft to mix plup to better drying. And this type dryer is not very long, it is shorter than normal dryer. This can save your area, and the Drying efficiency is very high. The plup will be in dryer 30-50 mins more or less. You can adjust the speed. As normal, the drying working time is 24hours , our smallest model the output capacity is 0.5 t/h, the largest one is 20 t/h. And the outlet moisture is less than 15%. The manure dryer include shell, lifting blade, mixing shaft, frequency conversion motor, reducer, gear ring, roller ring and overall support. So it is the whole plant to drying manure. It is suitable for high moisture material. You can use coal, natural gas, oil, biomass pellet to be fuel for this manure dryer. You should build a burning room to adjust hot air temperature. Normal temperature is 450-550C. A. Dewaterer. The raw manure moisture is more than 70%, before drying, you need this dewaterer to reduce the water content to be . This can save the fuel consumption, and Improve the efficiency of drying. B. Transfer system: belt conveyor or screw conveyor. We suggest use screw conveyor for this manure, it can mix manure before feeding. C. Dust catcher system: As normal you can use cyclone catcher, and we also suggest to use wet-filter to Reduce odor. D. Burning system,hot air room. The fire can not be in dryer directly, so you should build a hot air room with refractory bricks, then use fan blower to waft hot air to dryer. Related product:Chicken Manure Dryer
1.Product information of sus304 stainless steel tube/pipe Production: Steel pipe / steel tube Standard: API 5L, ASME, ASTM B36, JIS, DIN, GB8162, GB8163, GB5310, etc. Out Diameter: DN10~DN1200, 1/8"~100", 6mm~2400mm Wall Thickness: SCH5~SCH160, STD, XS, XXS, 1mm~120mm Material: ASTM A106 GRB/ A53 GRB/ API 5L X42, X52, X60, X65, X70GRB/ API 5 CT/ Q345/ ST42/ST37/ ST52. Q195/Q215/Q235/A179etc. Length: 12m, 11.8m, 6m, 5.8m, or as customers required Surface treatment: Black painting, black varnish, transparent oil, hot galvanized, 3PE, epoxy coating, BE, PE. Etc. Technique: Seamless & welded Usage 1. Low and middle pressure fluid transportation pipeline 2. Casing Tube 3. Boiler Pipe 4. Petroleunm and natural gas industry 5. Chemistry industry 6. Electric industry Package 1. Bundle packing. 2. Bevelled end or plain end or warnished as per buyer's required. 3. Marking: As per customer's requests. 4. Painting varnish coating on the pipe. 5. Plastic caps at ends. Supply range: 1. Seamless steel pipe 2. ERW steel pipe 3. Steel casing 4. Tubing 5. Hot-rolled steel pipe 6. Spiral steel pipe 7. Hot-sus304 stainless steel tube/pipe
Application: It is used for treating the unqualified turbine oil, especially the seriously emulsified turbine oil. This series, which can rapidly and effectively remove the water, gas and impurities aiming at turbine oilâ??s nature of high water content, easily emulsified and high impurity content, make the oil reach new oil standard. Features: 1.Breaking emulsification thoroughly by means of polymeric material. 2.Dewatering high-effectively with once and for two steps dehydrator method, TY series can thoroughly remove the liquid water, free water and 80% of dissolved water. 3.With zhongnengâ??s distinctive removing impurities technique filtering through double FH trapezoidal network and absorbing by polymeric material, this machine can make the Ã?3 surpass or equal to 200 and make the cleanness not surpass grade 6 (NAS1638). 4.With the trapezoidal, spiral, automatic back flushing system. 5.With the advanced dielectric condensation devices. 6.On-line oil purification can be carried out with turbine or water turbine automatically without any person. Advantages: This machine breaks emulsification thoroughly, and the oil is very difficult to be emulsified again after treatment. Its dehydration volume is large and it can drain off the water on line. TY series, which prevent lubrication system from damage, can effectively extend the lifetime of oil and protect turbine and other machines.
Rubber Hose The rubber hoses are used with dredgers for sand conveyance. It is normally installed between the HDPE pipes, ensure the whole pipelines more flexible. Thickness of rubber hose we offer is from 15mm to 80mm. The suitable working temperature is from -30 to 50. It is convenient to install, flexible to use, abrasion-resistant and bending-resistant. Tengyuan is specialized in producing UHMWPE Pipe, plastic floater, rubber hose, HDPE dredging pipe and Dredging Engineering Pipe, etc. Welcome to contact us, you will be kindly replied in 8 hours and quoted in 24 hours after receiving inquiry. Detailed Information: Material EPDM, Natural Rubber, Silicon, FKM, IIR, NBR, SBR, Sponge Rubber and so on. Color Black or customized. Hardness Shore A Service OEM or ODM services provided. Tolerance �±0.05mm Density 1.0-2.0g/cm�³ MOQ 1 pc Specifications Standard Size Working Pressure (Mpa) Standard Size Working Pressure (Mpa) Inner Diameter (mm) Total Length (mm) Inner Diameter (mm) Total Length (mm) 100 1000 1.0 556 1500 1.8 150 1000 1.0 606 1500 1.8 200 1200 1.0 650 1600 1.8 250 1200 1.2 706 1800 1.8 300 1200 1.2 756 1800 2.0 350 1200 1.2 800 2000 2.0 406 1200 1.5 850 2000 2.5 456 1300 1.5 900 2000 2.8 506 1400 1.6 Total Length:â?¤100000mm; Working pressure and flanges can be customized. Properties Items Index Items Index Items Index Note Working Pressure MPa 0.8 Tensile Strength MPa 11.8 Ageing Resistance 70Cx72h The parameters follow the standard of HG-T2185-9. The strength layer is 200D/3 cord fabric and the pulling force is 380N for each single root. Test Pressure MPa 1.2 Elongation (%) 400 Shore Hardness A 63±3 Burst Pressure MPa 2.4 Ozone Proof No Cracking in 48 hours exposing in Ozone Adhesion Strength Between Each Layer KN/m 1.0 Conveying Medium Muddy, water Abrasion 0.395c Strength Layer 4 layers of cord fabric Tengyuan can supply municipal engineering pipe, dredging engineering pipe, HDPE Gas Pipe, Power Engineering Pipe, Mining Pipe and agriculture irrigation pipe, etc. Integrity is the foundation of us, as well as the guarantee for enterprise's sustainable development. Features 1. Various hardness for your selection. 2. Oil resistance. 3. Good anti-aging performance. 4. Easy for bonding to other material. 5. Excellent oxygen and ozone resistance. 6. Non-flammable and self-extinguish property. 7. Good gas tightness. 8. High heat resistance. 9. Good abrasion resistance . Flange Adapter HDPE, HDPE Tee, Pipe Floats, Rubber Suction Hose for sale.
1.Quick Details Processing:Fermenting Equipment, argon-arc welding Place of Origin:Shandong, China (Mainland) Brand Name:ZunHuang Model Number:ZH-0.1/0.2/0.3/0.5/1.0/2.0 Processing Types:Alcohol Material:Stainless steel Shape:cylinder and cone Heating method:Electricity/gas/steam/LPG 2.Packaging & Delivery Packaging Details:steel frame or exporting standard wooden case Delivery Time:30 days 3.Specifications 1.high technical contents, 2. lower equipment investment, 3.simple process flow, 4.easy operation, 5.high yields 4.Product info The whole beer equipment is consisted of Mash system,Fermentation system,Refrigeration system,Control system and CIP cleaning system. The tank of the system all adopts SUS 304,and the system also have high automatic control capacity. 5.Technical specification Outside surface S.S.304,THK:1.5-4mm Inner surface S.S.304,THK:2mm-4mm Top shape Seal head or conical head Heating method Natural gas/electricity/LPG/direct fire Insulation layer Protected by polyurethane ,THK:80 mm Polishing precision �0.4µm Manhole Side upward Spral ball In the center of the inside tank Agitator Raking system conneted into a top reducer Chimney On the top of the tank Processing Argon-arc welding 6.Benefit analysis:(CNY) The analysis is based on chinese market. Items ZH-0.1 ZH-0.2 ZH-0.3 ZH-0.5 ZH-1.0 ZH-2.0 Malt 20kg�4.5 40kg�4.5 60kg�4.5 100kg�4.5 200kg�4.5 400kg�4.5 Hops 0.06kg�150 0.12kg�150 0.18kg�150 0.3kg�150 0.6kg�150 1.2kg�150 Yeast 0.1kg�1200/5 0.2kg�1200/5 0.3kg�1200/5 0.5kg�1200/5 1kg�1200/5 2kg�1200/5 Water consuming 0.5t�4 1t�4 1.5t�4 2.5t�4 5t�4 10t�4 Power consuming 30kw�1h 50kw�1h 60kw�1h 80kw�1h 150kw�1h 250kw�1h Personal salary 100�1 100�2 100�2 100�3 100�4 100�5 Missing5% 8.5 17 35 60 60 120 Management cost 10 10 20 20 30 30 Material cost 2 74 527 690 1085 1890 3400 Income 100L�15 200L�15 300L�15 500L�15 1000L�15 2000L�15 Tax4.4% 66 132 198 330 660 1320 Day benefit 1160 2341 3612 6085 12450 25280 Year(200days) benefit 232000 468200 722400 1217000 2490000 5056000 A set of good beer equipment not only can make good beer, but also can make good friendship between you and me.
Oil and gas like diesel en 590, jet fuel, diesel d6, gasoline, petroleum coke, lng.
YDS series liquid nitrogen tanks are mainly used to store liquid nitrogen and biological samples. Liquid nitrogen tank, also known as "liquid nitrogen biological container", is a low-temperature container that can store liquid nitrogen and biological samples. According to their uses, they can be divided into liquid nitrogen storage tanks, self-pressurized liquid nitrogen tanks, and gas-phase liquid nitrogen tanks. Among them, liquid nitrogen storage tanks can also be subdivided into storage types and transportation types. The storage type is mainly used for static storage and is not suitable for long-distance transportation during work; the transportation type is specially designed to meet transportation conditions and has an internal shock-proof function. Support, while also allowing for static storage when needed. Since liquid nitrogen tanks are used to store samples, they need to be used correctly: before use: 1. Check the jar Check whether the shell has any dents or dents, and whether the vacuum port is intact; Check whether there are foreign objects or impurities in the tank. If there are foreign objects, they need to be removed to prevent the inner tank from being corroded; 2. Pre-cooling Inject a small amount of liquid nitrogen into the tank to cool the inner liner; After injecting liquid nitrogen, cover the neck plug and leave it for a few hours, such as the boiling phenomenon disappears and the liquid nitrogen tends to stabilize; When the water droplets or frost produced by the heat exchange of the tank body fade away and there is no white frost on the neck plug, it means that the pre-cooling is completed. when using it: 1.Storage Store in a well-ventilated and cool place, do not expose to direct sunlight; Keep upright and do not tilt, lay horizontally, invert, pile up, hit each other or collide with other objects; 2.Transportation Handle it gently when moving and avoid sudden movements; It must be fixed during transportation to ensure that it will not shake during transportation; After use: Cleaning: 1. After the liquid nitrogen has evaporated, let it sit for several hours until the internal temperature of the container returns to normal temperature. 2. Pour warm water at 40 -50 into the container, and then wipe it with a cloth. 3. Rinse 2-3 times with clean water. 4. Invert the container to dry naturally. You can also use hot air to dry it. The suitable temperature is 40 -50 . Avoid hot air above 60 . After cleaning, store it in a dry and ventilated place, and check it regularly for next use.
Industrial equipment Brazed plate heat exchanger is a new type of high-efficiency heat exchanger made of a series of metal sheets with a certain corrugated shape stacked and brazed. Thin rectangular channels are formed between various plates, and heat is exchanged through the plates. Compared with the conventional shell and tube heat exchanger, its heat transfer coefficient is much higher under the same flow resistance and pump power consumption, and it has a tendency to replace the shell and tube heat exchanger within the applicable range. Applications: Refrigeration: used as condenser and evaporator b. HVAC: intermediate heat exchangers used in conjunction with boilers, intermediate heat exchangers in high-rise buildings, etc. c. Chemical industry: soda ash industry, ammonia synthesis, alcohol fermentation, resin synthesis cooling, etc. d. Metallurgical industry: heating or cooling of aluminate mother liquor, cooling of steelmaking process, etc. e. Machinery industry: cooling of various quenching fluids, cooling of reducer lubricating oil, etc. Design Parameters Flow range: 1-2000 m3/h Working pressure: vacuum-8.2MPa Operating temperature: -195-538C Interface size: 1"-DN300 welding, flange, thread and other connection forms Corrosion resistance: Welding seal without rubber gasket, choice of various metal and alloy materials, super corrosion resistance, longer service life. Application field: Crude oil, natural gas purification and chemical products; chemical industry; pharmaceutical and specific chemicals; injection control systems; HVAC, district heating, thermal power plants; food processing; cooling tower heat recovery Process requirements Pickling temperature: Raising the pickling temperature is conducive to improving the descaling effect. If the temperature is too high, it will aggravate the corrosion of the pickling solution to the heat exchanger plates. Through repeated tests, it is found that the pickling temperature should be controlled at 60. 2) Concentration of pickling solution: According to repeated tests, the pickling solution should be prepared according to the concentration of formic acid 81.0%, water 17.0%, buffer 1.2%, and surfactant 0.8%, and the cleaning effect is excellent. 3) Pickling method and time: The pickling method should be carried out by a combination of static soaking and dynamic circulation. The pickling time is static soaking for 2h first, and then dynamic circulation for 3~4h. During the pickling process, samples should be taken frequently to test the pickling concentration. When the difference between the two adjacent test concentrations is less than 0.2%, the pickling reaction can be considered to be over. 4) Passivation treatment: After pickling, most of the scale and metal oxides on the surface of the plate heat exchanger will be dissolved and fallen off, exposing new metal, which is very easy to corrode. The sheet is passivated.
TMAP with N:P:K 12:61:0, Food Grade, Tech Grade and electronic Grade Monoammonium Phosphate (MAP): Chemical Property: Monoammonium phosphate (MAP) is a chemical compound with the formula NH4H2PO4. It is a white crystalline powder that is highly soluble in water. MAP is an acidic salt with a low pH, making it suitable for applications where acidic conditions are desired. It contains both ammonium (NH4+) and phosphate (H2PO4-) ions, making it a source of both nitrogen and phosphorus nutrients. Applications: Monoammonium phosphate has a wide range of applications in various industries due to its properties as a fertilizer, fire retardant, and food additive. Agriculture and Fertilizers: MAP is commonly used as a fertilizer in agriculture. It serves as a source of both nitrogen and phosphorus, essential nutrients for plant growth. The high solubility of MAP ensures that plants can readily absorb these nutrients, promoting healthy root development, flowering, and fruiting. It is particularly beneficial for crops that require early-season nitrogen and phosphorus supplementation. Fire Retardant: MAP is also used as a fire retardant in both the agriculture and forestry sectors. When applied to plants or materials, it releases ammonium and phosphate compounds that can act as flame inhibitors, reducing the flammability of the treated material. This makes it valuable for preventing and controlling wildfires and protecting valuable crops. Food Additive: In the food industry, MAP is used as a leavening agent in baking. It reacts with baking soda (sodium bicarbonate) to produce carbon dioxide gas, which helps dough rise and gives baked goods their desired texture. It is commonly found in baking powders and self-rising flour. Industrial Applications: MAP is used in various industrial processes, including water treatment. It can be used to reduce the pH of water and control scale formation in boilers and cooling systems. It is also used in some metal cleaning and finishing operations. Nutrition Supplements: MAP is sometimes used in the formulation of nutritional supplements, especially in cases where a controlled release of both nitrogen and phosphorus is needed, such as in plant fertilizers for hydroponic systems or aquarium plant care. pH Adjustment: Due to its acidic nature, MAP can be used to adjust the pH of various solutions, including in some laboratory settings and industrial processes where maintaining a specific pH range is crucial. Monoammonium phosphate's versatility stems from its ability to provide essential nutrients, modify fire behavior, and contribute to various chemical reactions across multiple industries. However, its usage should be managed responsibly to ensure optimal results and minimal environmental impact. FORMULA: NH4H2PO4 CAS NO.: 7722-76-1 EINECS: 231-764-5 ORIGIN: China Port of Loading: Chongqing MOQ: 25 MT ETD: 25-30 Days Customization: Yes Package: 25KG/ 1000KG/1250KG/1300KG Bags
Description Pup Joint, also referred to as Riser Spool, or Surface Riser Spool is a pressure-containing piece of equipment having end connections, used below or between drill-through equipment. The Spacer spool is a wellhead section that has no provision for suspension of tubular members and which may have no provision for sealing of tubular members. It is used to provide separation between two components with equal-sized end connections. providing exceptional performance as a wellhead extension, securing connection for choke manifold and kill manifold. Features A. Flanged, studded, and rubbed ends are available in any combination. B. We can produce a spacer spool for any combination of size and pressure ratings. C. Integral forged material ensures excellent reliable working performance. D. spacer spools are designed to minimize length while allowing sufficient clearance for wrenches or clamps unless otherwise specified by the customers. E. The standard Spacer Spools do not include outlets, although outlets can be added as per request. F. Our spacer spool is suitable for general working conditions and sour service. G. Stainless Steel 316L or Inconel 625 corrosion-resistant alloy ring grooves are also available. H. Normally we will provide tap-end studs and nuts with studded-end connections. Technical Parameters Product Name: Spacer Spool, Riser Spool, Pup Spool, Pup Joint Pipe, Pup Joint Bore Size: 1-13/16", 2-1/16", 4-1/16", 5-1/8", 7-1/16", 13-5/8", 20-3/4", 21-1/4" or customized Overall Length(OAL)/Height: As per customers' requirements Connection: API 6A Flange, API 16A Clamp, WECO Union Standards: API Spec 6A, NACE MR0175, Working Pressure: 3000 PSI to 20000 PSI Material Class: AA, BB, CC DD, EE, FF Material: Made from high-strength alloy AISI 4130 (Integral Forged) 60K, 75K, and processed especially with heating treatment, suitable for H2S environment. Temperature level: Working Medium: Oil, Natural Gas, Mud Performance Requirement: PR1, PR2 Product Specification Level: PSL1, PSL2, PSL3, PSL4 Paint Color: Red, Blue, or Customized