The melting point range of SASOLWAX S682 is between 62 and 66, with a needle penetration of 44 (1/10mm) and a kinematic viscosity of 10 (mm²/ s) . This model is very similar to China's microcrystalline wax 70#, with a drop melting point of 70.2, a penetration rate of 21.4 (1/10mm), and a kinematic viscosity of approximately 7 (mm²/s). Because microcrystalline wax in China belongs to hard wax, the penetration may be slightly lower. If you are looking for a similar product to this SASOLWAX S682 micro wax, you can contact us. For example, you can use 70 # microwax in jar candles to improve candle performance.
Microcrystalline wax is a waxy substance that is solid at room temperature and has a high melting point. It is made up of long-chain hydrocarbons and is derived from crude oil or natural gas. Microwax is often used in various industrial and cosmetic applications, such as in the production of candles, cosmetics, and polishes.
Microwax is different from other types of wax because of its unique properties, such as its high melting point, low viscosity, and good hardness. These properties make it useful in applications where a wax with a high melting point and good hardness is required.
In addition to its industrial and cosmetic uses, microcrystalline wax is also used in the food industry as a coating for fruits and vegetables to extend their shelf life. It is also used in the pharmaceutical industry as a binder and coating agent for tablets and capsules.
What are the common types of microcrystalline wax produced by Germany's Sasol?
Sasolwax 682, Sasolwax 3971, Sasolwax 2528, Sasolwax 1365.
Which is better, Sasol or Chinese microcrystalline wax?
The main focus is on the application scenarios of the product, there is no best, only the most appropriate. Because the properties of microcrystalline waxes are similar.
Maximum : 100,000 MT/Month
Bitumen ( Asphalt) 40/50, 40/60, 50/70, 60/70, 70/100, 80/100 and 85/100
Supplier: Base oil sn60, 70, 100, 150, 350, 400, 500, 550, 600, 650; jet fuel a1, jp54, crude oil, bitumen 50,60/70, 90/100 & all grades of bitumen, used cooking oil, transformer oil, industrial oil, all types of grease, lng/lpg, used motor or engine oil, all types of motor oil, lubricants, additives and types of petroleum products
TECHNICAL SPECIFICATION DATA SHEET: PROPERTY TEST ASTM TEST METHOD API @ 60 F 30- 45 ASTM D-1298 Sulfur (wt%) max 0.8 ASTM D-4294 BS &W % max 2.0 Paraffins (vol. %) 40 -70 ASTM D-2789M Naphthenes (vol. %) > 25 ASTM D-2789M Organic Chloride(ppm) < 1.0 ASTM D-4929 Organic Nitrogen max (ppm) 500 ASTM D-4629 Microcarbon Residue (MCRT) 2.0 Max ASTM D-4530 Light ends C2 â?? iC5 5 % Max Total Acid Number, mg KOH 0.8 ASTM D-664 Metals by ICP ASTM D-5708 Vanadium
PAO 4 - 10 CST Product Uses: The 4-10 CST PAOs are used as synthetic base fluids for high-performance industrial and automotive lubricants (e.g., gear oils, compressor oils, hydraulic fluids, greases, engine oils) and functional fluids (e.g., dielectric, heat transfer, drilling). Almost all products go into lubricant applications.
MOBILGEAR 600 XP 220 Gear Oil Mobilgear 600 XP 220 Descriptions MOBILGEAR 600 XP 220 is extra high performance gear oil that has outstanding extreme pressure characteristics and load-carrying properties, intended for use in all types of enclosed gear drives with circulation or splash lubrication systems. MOBILGEAR 600 XP 220 is designed to stay ahead of the changing needs of gearbox technology. Gearbox technology design trends are towards smaller units with similar power throughout. This increase in power density places increased demands on gear oils. MOBILGEAR 600 XP 220 is formulated to meet the stress by providing extra protection for gears.
Exxon S-150 - a liquid solvent used in many industrial applications such as fuel additives, paints and coatings, pesticide formulations, industrial cleaning, and process fluids. Size: 55 Gallons
BASE Oil-SN 60, 70, 150, 300, 500, 600, 650 & BS 150.
Used Engine Oil
