Haynes 230 is a nickel-based superalloy that is known for its high strength, excellent resistance to oxidation and corrosion, and good thermal stability. It was developed by Haynes International, Inc., and is commonly used in high-temperature applications, such as gas turbine engines, aerospace, and chemical processing industries. Chemical Composition: Haynes 230 is composed of a range of elements, including nickel (Ni), chromium (Cr), molybdenum (Mo), iron (Fe), cobalt (Co), manganese (Mn), silicon (Si), carbon (C), and aluminum (Al). The chemical composition of Haynes 230 can be adjusted within certain ranges to meet specific application requirements. Mechanical Properties: Haynes 230 has excellent mechanical properties, including high strength, good ductility, and toughness. Its yield strength is 685 MPa and its tensile strength is 1025 MPa. It also has a 42% elongation rate. Thermal Properties: Haynes 230 exhibits good thermal stability, making it an excellent choice for high-temperature applications. Its melting point is 1305�°C (2381�°F), and it has a thermal expansion coefficient of 13.7 �µm/m�·K (7.6 �µin/in�·�°F). Corrosion and Oxidation Resistance: Haynes 230 has excellent resistance to oxidation and corrosion in high-temperature and high-stress environments. It has a good resistance to sulfur-bearing gases, such as hydrogen sulfide (H2S) and sulfur dioxide (SO2), and can withstand harsh chemical environments. Weldability: Haynes 230 can be welded using a variety of methods, including gas tungsten arc welding (GTAW), gas metal arc welding (GMAW), and resistance welding. However, special precautions need to be taken during welding to avoid cracking and other defects. Here are the country standards for Haynes 230 alloy: USA: AMS 5878, AMS 5879, AMS 5962, AMS 5963, AMS 5964, AMS 5965, AMS 5966, AMS 5967, AMS 5968, AMS 5969, AMS 5970, AMS 5971, AMS 5972, AMS 5973, AMS 5974, AMS 5975, AMS 5976, AMS 5977, AMS 5978, AMS 5979, AMS 5980, AMS 5981, AMS 5998, AMS 5999, AMS 5877, ASTM B366, ASTM B435, ASTM B572, ASTM B619, ASTM B622, ASTM B626, ASTM B366, UNS N06230 Europe: EN 2.4733 Germany: DIN 17742, VdT�?V 546 UK: BS HR 201 Japan: JIS NW 6230 We can provide the following the form:Haynes 230 coil; Haynes230 strip;Haynes 230 plate; Haynes 230 sheets; Haynes 230 tube; Haynes 230 pipe;Haynes 230 flat; Haynes 230 bar GB/JIS:NW 6230/UNS:R06230/W.Nr:2.4733 Haynes 230 is widely used in high-temperature applications, such as gas turbine engines, aerospace, and chemical processing industries. It is also used in heat exchangers, industrial furnaces, and in the production of petroleum and natural gas. Its excellent mechanical properties, corrosion and oxidation resistance, and good weldability make it a popular choice for a wide range of applications.
Haynes 718 Alloy is a high-temperature, high-strength nickel-based alloy developed by Haynes International. It has excellent oxidation resistance, corrosion resistance, and high-temperature strength, and is widely used in high-temperature and high-pressure environments in aerospace, energy, chemical, petroleum, and natural gas industries. The chemical composition of Haynes 718 Alloy includes approximately 52% nickel, 19% chromium, 3% titanium, 5% aluminum, about 0.9% iron, and trace amounts of carbon, sulfur, phosphorus, copper, and tantalum. This combination of elements gives Haynes 718 Alloy its excellent high-temperature performance. In addition, Haynes 718 Alloy uses advanced heat treatment processes, which can further improve its high-temperature strength and oxidation resistance. Haynes 718 Alloy can be made into various shapes of products, such as sheets, rods, pipes, forgings, castings, and welding materials, etc. Its mechanical properties improve with increasing temperature, and it can maintain high strength and toughness at high temperatures ranging from 600�°C to 980�°C. In addition, Haynes 718 Alloy has excellent oxidation resistance and can withstand high-temperature oxidation environments for a long time. Haynes 718 alloy is an important nickel-based superalloy used in high-temperature applications such as gas turbine engines. Below are the standards for Haynes 718 alloy in various countries: United States: AMS 5596, AMS 5662, AMS 5663, AMS 5664, AMS 5832, AMS 5962, AMS 5665, AMS 5666, AMS 5667, AMS 5668, AMS 5669, AMS 5670, AMS 5671, AMS 5758, AMS 5759, AMS 5660, AMS 5661, AMS 5677, AMS 5909, AMS 5927, AMS 5947, AMS 5950, AMS 5963, AMS 5964, AMS 5966, AMS 5967, AMS 5968, AMS 5969, AMS 5970, AMS 5971, AMS 5972, AMS 5973, AMS 5974, AMS 5975, AMS 5976, AMS 5977, AMS 5978, AMS 5979, AMS 5980, AMS 5981, ASTM B637, ASTM B670, UNS N07718 Europe: EN 2.4668 Germany: DIN 17744, VdT�?V 718 France: AFNOR NC 19 Fe Nb United Kingdom: BS HR 201, BS HR 401, BS HR 501 Japan: JIS NW 0771 We can provide the following the form:Haynes 718 Alloy coil; Haynes 718 Alloy strip;Haynes 718 Alloy plate; Haynes 718 Alloy sheets; Haynes 718 Alloy tube; Haynes 718 Alloy pipe;Haynes 718 Alloy flat; Haynes 718 Alloy bar BS:HR 201/JIS:NC19FeNb/UNS:N07718/W.Nr:2.4669 Haynes 718 is a nickel-chromium alloy that is known for its high strength and excellent corrosion resistance. It is commonly used in a wide range of applications, including: Aerospace industry: Haynes 718 is widely used in the aerospace industry due to its high strength, excellent fatigue resistance, and good weldability. It is used for components such as gas turbine engine parts, thrust reversers, and exhaust systems.
Capacity: 3.2L; Heat retention after 6h >= 78 C; Body: PP Plastic material, customized patterns and colors; Lid: PP Plastic material, can be used as a cup; Stopper: Aluminum and cork material, easy to handle; Bottom: PP Plastic material, skid resistance, easy to disassemble; Hanger: Portable; Glass refill: High quality, produced with Japanese technology, excellent heat retention rate; Color and Pattern: Optional or customized; Logo: Rang Dong; OEM: Accepted;
Request a quote for Wrap around label via our website at: indevcogroup.com/dairy-and-ice-cream/wrap-around-label/ Wrap-around labels for labeling dairy liquid items filled with glass or PET bottles. Labels designed to enhance the brand impact and attract consumer attention on-shelf. We also manufacture Barrier Films for Dairy products, Pouches for Milk, Aluminum Lids for Dairy Products, and other dairy packaging materials.
Aluminum peelable lids in rolls are used for sealing multiple portioned products such as water, juice, frozen desserts, flavored yogurt, creamer, condensed milk, readymade food, and other condiments. The lids come with heat-seal lacquer for PS, PVC, PP, and PET applications. Its sealable properties act as a barrier against external factors, such as oxygen and water. Request quote via our website at Also available in pre-cut forms.
Item Quality standard AL 99.7% Si 0.25 % Fe 0.40% Cu 0.05% Mn 0.05% Mg 0.05% Ti 0.03% Zn 0.10% Packaging Detail: 1. Compressed into rectangular block 2. 50kgs/bag, 1000kgs/bag 3. 50kgs/bale, 50kgs/bundle 4. 20mt/20'fcl, 25mt/40'fcl Aluminum Wire Scrap,Aluminium Scraps Item: Aluminium scrap 6063 Aluminum scrap Aluminum wire scrap Aluminum scrap UBC(Used Beverage Cans) Aluminum wheel scrap Aluminum tense and tabor Aluminum content 75%, 95%, 99%, 99.7% Technical Process (Mould DesigningMould Cutting Mould Testing Mould Workshop Mould Heating) Extruding (Aluminium Ingot&Supplementary Materials Smelting Homogenizing Bar Heating ) Aluminum wire scrap Composition
Zeolite, the multifaceted mineral catalyst for sustainable innovation is a remarkable group of minerals with astounding versatility Zeolite has increasingly become a cornerstone in sustainable technology and environmental management. These micro porous aluminosilicates - comprised of aluminum, silicon, and oxygen, with their general chemical formula expressed as Mx/n[(AlO2)x(SiO2)y]zH2O, where 'M' represents the exchangeable cations like calcium, sodium, potassium, and magnesium- formed naturally and synthesized for tailored properties, exhibit unique characteristics that make them indispensable across numerous industries, from environmental cleanup to advanced manufacturing. Properties of Zeolite Zeolites are primarily made up of silicon, aluminum, and oxygen in a framework that includes size-selective pores and channels. These structural features are critical because they allow zeolites to act both as molecular sieves, trapping particles based on size exclusion, and as ion exchangers, selectively swapping cations such as calcium, potassium, and sodium. Zeolites are hydrophilic, meaning they can absorb water and other polar molecules. However, modifications during synthesis can adjust this property, allowing for hydrophobic zeolites that are selective for organic compounds, expanding their utility in non-aqueous environments. Versatile Applications: Environmental Remediation: Zeolites are extensively used in water treatment processes to remove pollutants like heavy metals, ammonia, and radioactive isotopes from contaminated waters. Their high ion-exchange capacity makes them excellent for use in both municipal and industrial wastewater treatment plants. Energy Efficiency: In the energy sector, zeolites are pivotal in refining petroleum products through fluid catalytic cracking, significantly enhancing yield and reducing byproducts. Additionally, zeolites are integral to the development of adsorption-based energy storage systems, which are crucial for renewable energy integration. Agricultural Enhancements: Zeolite's role in agriculture extends beyond soil amendment. It is used to stabilize nitrogen in urea-based fertilizers, reducing volatilization and thereby increasing nitrogen use efficiency. This contributes to lower emissions of nitrous oxide, a potent greenhouse gas. Healthcare Innovations: In healthcare, zeolites are being investigated for their potential in drug delivery systems, particularly for targeted cancer therapies. Their porous structure can be engineered to load and release therapeutic agents directly at tumor sites, minimizing systemic side effects.
Incoloy alloy 925 is a precipitation-hardenable nickel-iron-chromium alloy that contains additions of molybdenum, copper, titanium, and aluminum. The alloy has excellent mechanical properties at both ambient and elevated temperatures, making it suitable for use in a wide range of applications, including sour gas and oil production, aerospace, chemical processing, and marine engineering. Incoloy alloy 925 is known for its high strength, which is achieved through a combination of solid solution strengthening and precipitation hardening. It also exhibits excellent resistance to corrosion and oxidation in a variety of environments, including those containing sulfides and chlorides. The addition of molybdenum and copper to the alloy improves its resistance to pitting and crevice corrosion, while the titanium and aluminum additions enhance its resistance to intergranular attack. The combination of these elements makes Incoloy alloy 925 highly resistant to stress corrosion cracking and hydrogen embrittlement. The alloy is typically supplied in the solution annealed condition, and can be easily fabricated using common techniques such as welding, brazing, and machining. After fabrication, the alloy can be precipitation hardened to achieve its maximum strength. Incoloy alloy 925 is available in a range of forms, including round bars, flat bars, forgings, and wire. It is also available in various sizes and dimensions to meet the specific needs of different applications. Overall, Incoloy alloy 925 is a versatile and high-performance alloy that offers excellent strength, corrosion resistance, and durability in demanding applications. The international standard designations for Incoloy alloy 925 include UNS N09925 and W.Nr. 2.4858. There are also corresponding standards and specifications in different countries and regions, such as AMS and ASTM standards in the United States, EN standards in Europe, and JIS and JPI standards in Japan. Here are the specific standards and designations for Incoloy alloy 925 in different countries: United States: AMS 5660, AMS 5661, AMS 5662, AMS 5663, AMS 5664, AMS 5672, AMS 5872, ASTM B408, ASTM B805, UNS N09925 Germany: DIN 17742, DIN 17753, DIN 17754, W.Nr. 2.4858 United Kingdom: BS 3076, BS HR 6 Europe: EN 10095, EN 10204-3.1 Japan: JIS G4902, JPI-SB46 We can provide the following the form:Incoloy alloy925 coil; Incoloy alloy925 strip;Incoloy alloy925 plate; Incoloy alloy925 sheets; Incoloy alloy925 tube; Incoloy alloy925 pipe;Incoloy alloy925 flat; Incoloy alloy925 bar Incoloy alloy 925 has a wide range of applications in various industries, including: Oil and Gas Industry: Incoloy alloy 925 is widely used in oil and gas industry due to its high strength, excellent corrosion resistance, and resistance to sulfide stress cracking in sour environments. It is used in various components of downhole tools, such as subsurface safety valves, tubing hangers, and packers.
Hastelloy C-2000 is a high-performance nickel-molybdenum-chromium alloy with copper and tungsten additions, known for its exceptional resistance to a wide range of corrosive media, including sulfuric acid, hydrochloric acid, nitric acid, and their mixtures. Hastelloy C-2000 was developed by Haynes International as an improved version of the original Hastelloy C alloy, with enhanced corrosion resistance and improved mechanical properties. Its chemical composition includes approximately 59% nickel, 16% molybdenum, 16% chromium, 1.6% copper, 0.6% tungsten, and smaller amounts of iron, manganese, silicon, carbon, and aluminum. Hastelloy C-2000 has excellent resistance to localized corrosion, including pitting, crevice corrosion, and stress corrosion cracking, as well as to intergranular attack and corrosion from wet chlorine gas. It also has good resistance to oxidizing and reducing environments, making it suitable for use in a wide range of industrial applications, including chemical processing, pollution control, and pulp and paper production. In terms of mechanical properties, Hastelloy C-2000 has a minimum tensile strength of 620 MPa and a minimum yield strength of 270 MPa, along with a minimum elongation of 45%. It has a hardness range of HB 215-335. Overall, Hastelloy C-2000 is a highly versatile alloy that offers excellent resistance to a wide range of corrosive media, combined with good mechanical properties and ease of fabrication. It is a popular choice for applications where corrosion resistance is critical, such as chemical processing, pollution control, and pulp and paper production. Here are the national standards for Hastelloy C-2000 alloy: United States: AMS 4675, AMS 7233, ASTM B366, ASTM B574, ASTM B575, ASTM B619, ASTM B622, ASTM B626, UNS N06200 Europe: EN 2.4675 Germany: DIN 17744 France: AFNOR NU-30M United Kingdom: BS HR 505 Japan: JIS NW 6200 We can offer the following products:Hastelloy C-276 coil; Hastelloy C-276 strip;Hastelloy C-2000 plate; Hastelloy C-2000 sheets; Hastelloy C-2000 tube; Hastelloy C-2000 pipe;Hastelloy C-2000 flat; Hastelloy C-2000 bar GB:GH3600/JIS:NW 6200/UNS:N06200/W.Nr:2.4675 Hastelloy C-2000 is a high-performance nickel-molybdenum-chromium alloy with copper and tungsten additions, known for its exceptional resistance to a wide range of corrosive media, including sulfuric acid, hydrochloric acid, nitric acid, and their mixtures. Hastelloy C-2000 was developed by Haynes International as an improved version of the original Hastelloy C alloy, with enhanced corrosion resistance and improved mechanical properties. Its chemical composition includes approximately 59% nickel, 16% molybdenum, 16% chromium, 1.6% copper, 0.6% tungsten, and smaller amounts of iron, manganese, silicon, carbon, and aluminum.
Inconel 617 is a mixture of nickel, chromium, cobalt and molybdenum, high levels of nickel (44.5% minimum) and chromium (20-24%) give this alloy good resistance to reducing and oxidizing media. Cobalt (10-15%) and molybdenum (8-10%) combine to strengthen the solid solution. A small amount of aluminum (0.8-1.5%) is also included and works with chromium to provide good resistance to oxidation at high temperatures. One of the alloy's key properties is that it maintains high levels of strength even at elevated temperatures without compromising its corrosion resistance. The material is also very functional, as it can be easily formed and welded using traditional techniques. Here are the standard grade and execution standards for Inconel 617 in various countries: American standard grade: UNS N06617 Execution standards: AMS 5887: Melting material for nickel-based high-temperature alloys. AMS 5888: Inconel 617 plates, sheets, and strips produced by hot rolling, cold drawing, and hot forming. AMS 5889: Seamless and welded Inconel 617 tubes. AMS 5608: Inconel 617 bars and shapes. ASTM B166: Standard specification for nickel and nickel alloy rod, bar, wire, and strip. ASME SB-166: Same as above. European standard grade: NiCr22Co12Mo9 (2.4663) Execution standards: EN 10095: Technical delivery conditions for hot rolled and forged stainless steel and heat resisting steel and technical conditions for the delivery of heat resisting alloys. EN 10269: Technical delivery conditions for high temperature and corrosion resistant steels. EN 10204: Standard specification for metallic products - types, batch numbers and grade certificates. EN 10302: Technical delivery conditions for nickel alloy bars, hot rolled, forged, and cold worked. Japanese standard grade: NCF 617 Execution standards: JIS G4902: Standard specification for seamless and welded nickel alloy pipes. JIS G4903: Standard specification for seamless and welded nickel alloy pipes. Chinese standard grade: GH617 Execution standards: GB/T 14992: Standard specification for seamless and welded nickel alloy pipes. GB/T 14994: Standard specification for nickel alloy forgings. GB/T 12771: Standard specification for seamless steel pipes and welded steel pipes for hydraulic transmission. These execution standards specify the technical requirements for Inconel 617 material such as chemical composition, physical properties, processing, and testing requirements, ensuring its quality and performance meet the specified standards. We can provide the following the form:Inconel617 alloy coil; Inconel617 alloy strip;Inconel617alloy plate; Inconel617 alloy sheets; Inconel617alloy tube; Inconel617 alloy pipe;Inconel617 alloy flat; Inconel617 alloy bar EN:NiCr22Co12Mo9;JIS:NCF617;UNS:N066171;W.Nr:2.4663a
NON-STICK Antibacterial Frying Pans Enjoy your cooking with NON-STICK Antibacterial Frying Pans! Two color Option! (Black Pearl / Stone Touch) 1. 5 layers NON-STICK coating is strong against scratches, and wash well. 2. Due to the excellent NON-STICK effect with fluorine coating, the food does not stick to the pan. 3. It is manufactured by aluminum casting method and can not be deformed by external force. 4. The excellent design that coated even the handle adds a splendor to the kitchen. 5. Because the handle is coated, the handle is not hot when cooking, By maximizing grip, you can cook safely and conveniently at cooking.
Magnesium sulfate heptahydrate is known as one of the mosts perfect nutrients for plants, numerous claims are made its effectiveness in increasing seed gemination, improving uptake of other nutrients, and enhancing growth and overall health.
Minimum Length Bottom - 4 cm Produced Tooth Colors Brass, Antique Yellow, Antique Oxide, Oxide, Tin, Tin Oxide, Copper, Copper Oxide, Gold, Light Gold, Rose Gold, Gun Metal, White Free, Black Free, Painted Teeth Dimensions Tooth height 1.40 mm + 0.05 mm Thread width 3.30 mm + 0.05 mm Strip width (closed) 25 mm ± 0.100 mm Strip width (open) 11.5 mm + 0.10 mm
Alloy: 8011 Temper: h18 Gauge: 0.015-0.025mm Width: 300-1240mm Id: 3'' or 6'' Od£º 750mm max Wooden box
Alloy: 1235, 8011 Temper: soft Gauge: 0.006-0.025mm Width: 250-1575mm Id: 3'' or 6'' Od: 800mm max
Aluminum scrap.
Aluminium scrap.
Alloy: 1100, 1050, 1060, etc. Temper: H12/H22, H14/H44, H16/H46, H18/H48, etc. Thickness (mm): 0.2~3.0 Width (mm): 1000~1500 Coating material: PE, PVDF Coating color: As your request Coating thickness (mm): 0.018~0.025 Inner Diameter (mm): 505 Adopt standard: GB/T 3190, GB/T 3880, ASTM B209, EN 485 Application: For ceiling, decoration, building, appliance, furniture, etc. Free sample: Available by freight collected.