-preferical pumps -centrifugal pumps -flapped pumps -jacuzzi and acid pumps -stainless body centrifugal pumps -self-suction jet pumps -two-step centrifugal pumps -stainless body multi stage pumps ..
We manufacture slurry pumps for various slurries in cement and concrete industry as well as other slurries across industries like pulp, clay and oil. Our slurry pumps are designed for sturdy operation with heavy duty cycles. Our pumps are precision manufactured to provide measured output or a continuous output as required. We provide two types of slurry pumps - peristaltic pumps and screw pumps, both used for positive flow of slurries. Please contact us with your requirements for further information on suitability and productivity.
Power range: from 1 inch to 4 inch outlets, powered by: mitsubishi engine brand: brilliant, or oem low fuel consumption, low maintenance, with maximum reliability and maximum performance, this also helps greatly reduce the emission levels, for a much more environmentally friendly product.
Salient features data: Aov treadle irrigation pump is a high capacity pump designed to lift water by suction from shallow wells upto 7.5 mts. And other surface sources. It has a capacity to discharge 5000-7000 liters per hour. It is operated by leg muscles in a comfortable walking motion and can be operated by one or two adults or two or more children. It is a double cylinder and double acting model, both downward stroke and upward stroke delivers water and optimum utilization of energy spent is achieved. A portable self-contained unit sits at ground level. Flexibility in installation, it can be moved from one location to another, without any permanent installation on a single well. Due to its simplicity and compactness, maintenance of the pump is economical in all aspects.
Hand pump.
Hand pump.
Hand pump.
Hand pump.
FL pump.
Treadle pump.
Solar pumps.
A- hand pump.
Material construction of motor Part nameMaterial ShaftSs 431 / ss 410 Bearing bushLeaded tin bronze Thrust bearingS.S. / carbon / teflon Lower/upper housingCast iron Stator shellStainless steel (heavy duty) Material construction of pump Part nameMaterial Impeller/diffuserNoryl gfn 2-701 Bearing bushLeaded tin bronze Pump shaftS.S 202 Suction casing / nrvCast iron Strainer / cable guardStainless steel Operating limits Power range0.5 h.P. To 1.5. H.P. (150 /240 v, 50 hz. Single phase) 0.75 h.P. To 5.0 h.P. (350 /415 v, 50 hz. Ac three phase) Speed2850 rpm Max. Discharge400 lpm Min. Discharge15 lpm Max. Head900 ft. Per stage head20 ft. Special features : Lower power consumption Long durability due to corrosive ss body Special design to withstand wide voltage fluctuations. Excellent performance even at low voltage Special sand guard used to prevent ingress of solids or foreign particles.
Material Construction of Motor Part NameMaterial ShaftSS 431 / SS 410 Bearing BushLeaded Tin Bronze Thrust BearingS.S. / Carbon Lower/Upper HousingCast Iron Stator ShellStainless Steel (Heavy Duty) Material Construction of Pump Part NameMaterial Impeller/DiffuserSS 410 / Cast Iron Bearing BushLeaded Tin Bronze Pump ShaftS.S 202 Suction Casing / NRVCast Iron Strainer / Cable GuardStainless Steel Stage CasingCast Iron Operating Limits Power Range5.0 H.P. (180 /240 V, 50 Hz. AC single phase) 5.0 to 10.0 H.P. (350 /415 V, 50 Hz. AC Three phase) Speed2850 RPM Max. Discharge700 LPM Min. Discharge300 LPM Max. Head275 Ft. Per stage Head33 Ft. Special features : Lower Power Consumption Sand Fighter Model Long durability due to complete SS Motor body With stand with wide voltage fluctuation Specially Designed for high discharge Excellent performance even at low voltage
Material construction of motor Part nameMaterial ShaftSs 431 / ss 410 Bearing bushLeaded tin bronze Thrust bearingS.S. / carbon Lower/upper housingCast iron Stator shellStainless steel (heavy duty) Material construction of pump Part nameMaterial Impeller/diffuserSs 410 / cast iron Bearing bushLeaded tin bronze Pump shaftS.S 202 Suction casing / nrvCast iron Strainer / cable guardStainless steel Stage casingCast iron Operating limits Power range5.0 h.P. To 20.0 h.P. (350 /415 v, 50 hz. Ac three phase) Speed2850 rpm Max. Discharge1250 lpm Min. Discharge50 lpm Max. Head1300 ft. Per stage head(1) 50 ft. For k-type model / 45 ft. For q-type model (2) 35 ft. For k-type model / 30 ft. For q-type model Pecial features : Low power consumption Sand/mud proff design Specially designed ss 304 grade bowl for high head & high discharge
Material Construction of Motor Part NameMaterial ShaftSS 431 / SS 410 Bearing BushLeaded Tin Bronze Thrust BearingS.S. / Carbon Lower/Upper HousingCast Iron Stator ShellStainless Steel (Heavy Duty) Material Construction of Pump Part NameMaterial Impeller/DiffuserSS 410 / S.S. 304 Bearing BushLeaded Tin Bronze Pump ShaftS.S 202 Suction Casing / NRVCast Iron / S.S. Strainer / Cable GuardStainless Steel Stage CasingS.S. 304 Operating Limits Power Range5.0 H.P. to 20.0 H.P. (350 /415 V, 50 Hz. AC Three phase) Speed2850 RPM Max. Discharge1380 LPM Min. Discharge55 LPM Max. Head1200 Ft. Per stage Head50 Ft. for K-type model / 45 ft. for Q-type model Special features : Energy Efficient Models Long durability due to non corrosive SS body Sand/mud proff design Specially Designed SS 304 grade bowl for high head & high discharge Excellent performance even at low voltage
5.0cfm Ultimate perssure :0.04pa Wooden crate
We are manufacture of centrifugal process pump with different mock such as ci, ms, wcp, ss, etc.
3g series three screw pump It applies to deliver clean and non-corrosive medium which has lubricating property at temp blow 150 with the viscosity of 3-760cst. The pump working pressure range from 0.6mpa to 2.5mpa and flow rate range from 0.6m3/h to 123m3/h Feature Medium is delivered in axial direction continuously without agitation and pulsation Small vibration and low noise High pressure and high efficiency Simple structure, easy disassemble and assembly Small volume and light weight Slight wear and long life Materials: Driving and driven screw:16mncrs5, 40cr, 46, 38crmoal Pump body: ht200, qt450-10, zcusn10p1, zg270-500 Export standard case/plywood case
Lqb asphalt heat pump (gear oil pump) applicable to transport non-corrosive, not containing solid particles, at normal temperature have coagulability medium, especially suitable for cold area outdoor installation and process medium need insulation occasions, medium temperature can reach 250 c, the viscosity for 5-1500 cst. Asphalt pump use: Used to transport heavy oil, asphalt, glues, resin, detergent, etc Structure: This lqb asphalt heat pump pump body with hollow sandwich, and is equipped with import and export flange, can be used for heat conduction oil, steam, hot water and other media to transport liquid and pump heat insulation and cooling. Export standard carton or plywood case
