Products Description The electric railroad transfer vehicle is mounted on steel rail for shuttling along a fixed path. The capacity load of the electric railraod transfer vehicle can up to 500 tons. Standard electric railroad transfer vehicle come in lengths of 4, 6 or 8 FT and widths of 4 or 6 FT. The capacities and sizes of the electric railroad transfer vehicles are available for specific applications. The electric railroad transfer vehicle can be designed to be semi-manual or fully-automated depending on the requirements of the application. The electric railroad transfer vehicle can also be part of automated crane systems, serving to shuttle goods, material, or product to and from manufacturing processes or storage locations. Available Options Flat decks or fixtures customized for specific loads. Custom deck configurations including built-in scales and lift/tilt/rotate capabilities. Track or trackless, non-guided steering. Alternative drive and steering systems including gear reducer axle drives and individually-controlled drive wheels. Fixed or variable speeds with forward/reverse function. Drives with acceleration/deceleration capabilities. Variety of operator control systems including fixed user interface, pendant control on coil cord, and radio-controlled remote operation. Safety features including horns, flashing lights, e-stops, bumpers and collision avoidance systems. Each of our design can meet your specific application. Applications Material or stock shuttle Assembly transfer Tank transfer Moveable machinery platform
Product Introduction The cable drum power rail flat cart is an electric rail transfer cart powered by cable drum. The cable drum power rail flat carts get power AC 380 V through the device of the cable drum which is installed on the bottom of the rail flat carts. The motor is controlled by the power through the AC control system. Using this principle to operate the cable drum power rail flat carts start, stop, go forward, backward and so on. Features This series cable drum power rail flat carts are suitable to be applied in the bed environment, for example, high-temperature and anti-explosion condition. Compared with KPX (battery powered) series rail flat carts, the using time of the cable drum power rail flat carts are unlimited. Compared with KPD (conductor rail powered) series rail flat carts, the cable drum power rail flat carts have no strict requirement for the construction of the rails. Custom Options Flat decks or fixtures customized for specific loads. Custom deck configurations including built-in scales and lift/tilt/rotate capabilities. Track or trackless, non-guided steering. Alternative drive and steering systems including gear reducer axle drives and individually-controlled drive wheels. Fixed or variable speeds with forward/reverse function. Drives with acceleration/deceleration capabilities. Variety of operator control systems including fixed user interface, pendant control on coil cord, and radio-controlled remote operation. Safety features including horns, flashing lights, e-stops, bumpers and collision avoidance systems.
Products Description The die handling railway trolley is mounted on steel rail for shuttling along a fixed path. The die handling railway trolley is designed for die, mold and heavy material handling. The capacity load of the die handling railway trolley can up to 500 tons. The die handling railway trolley can be widely used in many fields, such as worshop, warehouse, production line, assembly line, etc. Working Principle The die handing railway trolley is powered by low voltage railways, it makes the AC electricity power is transformed into AC 36v two-phase and are respectively connected to the two rails. Then the die handling railway trolley conduct the AC 36v on rail into the electrical appliance box at the bottom of the die handling railway trolley. And then the AC 36v is transformed into DC 36v and then control the DC motor through the DC control system to make the die handling railway trolley start, stop, go forward and backward and adjust the speed and so on. Available Options Flat decks or fixtures customized for specific loads. Custom deck configurations including built-in scales and lift/tilt/rotate capabilities. Track or trackless, non-guided steering. Alternative drive and steering systems including gear reducer axle drives and individually-controlled drive wheels. Fixed or variable speeds with forward/reverse function. Drives with acceleration/deceleration capabilities. Variety of operator control systems including fixed user interface, pendant control on coil cord, and radio-controlled remote operation. Safety features including horns, flashing lights, e-stops, bumpers and collision avoidance systems. Each of our design can meet your specific application. Applications Material or stock shuttle Die and mold transfer Assembly transfer Tank transfer Moveable machinery platform
Product Introduction - Rail Steerable Transfer Vehicle The rail steerable transfer vehicle is an electric material transfer vehicle powered by cable reels, it is designed for material handling. The rail steerable transfer vehicle gets power AC 380v through the device of cable reel, and the motor is controlled by the power through AC control system that make the rail steerable transfer vehicle to start, stop, go forward, backward, adjust the speed and so on. We adopt the magnetic coupling cable reel, it can make sure that there is no force on the cable and the cable can be wound and released evenly. If it is used in short distance transportation, it is a better choice without limited time. Of course, our product includers different power, the proper solution will be recommended to you after learning your requirements. Features - Rail Steerable Transfer Vehicle Metallurgical Motor - Y series metallurgical motor is suitable for frequent starting. Cable reel - With a large adjustment range for take - up torque, constant tension after adjustment and stability, good synchronization performance. Self-locking ability, no cable slipping - Reasonable structure arrangement, easy installation, use, maintenance, stable and reliable performance. Workshop bay to bay commonly used cars - This series of rail steerable transfer vehicles are mainly used in high temperature, harsh, explosion-proof occasions, it usually used in workshop bay to bay transfer. Large load capacity - The using time is unlimit, adapted to any load, high frequency of use. Custom Options - Rail Steerable Transfer Vehicle Flat decks or fixtures customized for specific loads. Custom deck configurations including built-in scales and lift/tilt/rotate capabilities. Non-guided steering. Alternative drive and steering systems including gear reducer axle drives and individually-controlled drive wheels. Fixed or variable speeds with forward/reverse function. Drives with acceleration/deceleration capabilities. Variety of operator control systems including fixed user interface, pendant control on coil cord, and radio-controlled remote operation. Safety features including horns, flashing lights, e-stops, bumpers and collision avoidance systems.
Product Introduction The electric motorized flat carriage is a rail type transportation carriage that lays a track on the ground, and the laid rail is generally an I-shaped surface contact rail. The characteristics of the performance of the electric motorized flat carriage is that it has a large bearing capacity, is not afraid of dirty and squeaky, easy to maintain, and has a long service life. The electric motorized flat carriage can be equipped with industrial wireless remote control devices to achieve artificial remote control. The electric motorized flat carriage has a simple structure, easy using and operation. It is commonly used in construction materials, stone materials, metal processing, tunnel engineering, iron and steel metallurgy, hydropower industry, aerospace war industry, ship terminals, automobile machinery and other fields. Features This series electric motorized flat carriage is suitable to be applied in the bed environment, for example, high-temperature and anti-explosion condition. Compared with KPX (battery power) series flat carriage, the using time of the electric motorized flat carriage is unlimited. Compared with KPD (conductor rail power) series flat carriage, the electric motorized flat carriage has no strict requirement for the construction of the rails. Applications Die handling; Portable machine base; Assembly mount; Metal coil transporter; Heavy equipment transporter with lift deck; Structural steel transporter; Shuttle cart for pipe; Pre-cast concrete production carts;
Product Details Usage: Industrial, Workshop, Warehouse, Port Wheel Type: Polyurethane Wheels Color: Customized Running Speed: 0-40 m/min (Adjustable) Load Capacity: 1-500 Ton (Can Be Customized As Per Demands) Wheel Amount: 4/6/8 Application: Materials Transfer Working Principle The trackless material transfer cart is battery powered. The battery is installed in the trackless material transfer cart. The batteries supplied the electricity to the DC motor through the electrical control system. By this ways, we can make the trackless material transfer cart to start, stop, go forward, backward, adjust the speed and so on. Features 1. Maintenance-free high-power AC drive system, providing reliable driving power; large-capacity battery, strong endurance. 2. Unlimited remote control, simple operation, safe and stable. 3. Standard imported controllers, meters, reliable, durable; waterproof and dustproof plug-in, to give the circuit a reliable protection, greatly reducing the electrical fault. 5. Emergency power off switch, turn speed limit, undervoltage protection, and other personnel safety features to ensure traffic safety. 6. Polyurethane rubber wheel, no damage to the ground, the body of high stability, not easy to slip. 7. Optional side pull battery, large capacity battery; support non-standard customization, such as the weight, body size and so on. Applications Die handling; Portable machine base; Assembly mount; Metal coil transporter; Heavy equipment transporter with lift deck; Structural steel transporter; Shuttle cart for pipe; Pre-cast concrete production trolleys;
Fiber Optic Horizontal Splice Closure Quick Details Place of Origin: Shenzhen, China (Mainland); Brand Name: OPTICO; Material: ABS or PC; Dimension (cm): 47*18*13; Cable Entry & Exit: 3 Entry 3 Exit; Maximum capacity: 96 cores; Price Terms: FOB Shenzhen 11~18USD/pcs; MOQ: 500pcs; Payment Terms: T/T, L/C, West Union; 30% deposit, 70% balance before shipment; Production Time: 7~15 days after deposit; The fiber optic horizontal splice closure is suitable for protecting fiber cable splices in straight-through and branching applications. Based on an advanced formula, the plastic parts are made of injection-molded, high-strength engineering plastic ABS or PC by numerical control equipment; therefore effectively prevent products from aging caused by coldness, heat, oxygen and ultraviolet radiation. The strong housing and main components provide fire resistant, waterproof, and quakeproof while protecting splices during pulling, compressing, and impacting, bending, tensioning, axial tensioning. It ensures long-term reliability and usage under ambient temperature from -40°C to +75°C Dimension (CM): 47*18*13CM Cables Entry & Exit: 3Entry 3Exit Cable Diameter (mm): Φ7-Φ16 Sealing Structure: Sticky cincture or silicon gum material Sealing Material: ABS or PC Maximum capacity: 96 cores It is widely used for communication, network system, cabled T.V. of CATV, the fiber optic cable by network; Components: Seal tape, Insulation tape, Nylon tie, heat shrinkable sleeve, metal hook, seal fittings,internal hexagonal spanner; Atmospheric pressure:70~106KPa Optic property: The spare fiber coiled in the fiber emplacing device; the fiber connector wonâ??t attenuate during the FOSC installation operation period. Seal Performance:
Product Introduction - Electric Flat Trailer The electric flat trailer, it is an electric transfer trailer powered by cable reels which is installed at the bottom of the electric flat trailer. It is designed for transporting cargoes or equipment from one bay to another in factory, from indoor to outdoor. The electric flat trailers are widely applied in the industry transportation field, our company can designed the transfer solution to meet our customers' demand. Advantages - Electric Flat Trailer The electric flat trailer can run on the straight railways to carry many material, workpiece, workpiece; The electric flat trailer can be applied in many occasions, such as easy explosion, easy corrasion, high temperature; AC motor, simple structure, not limited for the using time; This kinds of electric flat trailer is powered by cable reels, so there is not strict requirement for the construction of the railway, and the running distance should accord to the length of the cable. Cost is not high, easy to operate and maintenance; The electric flat trailers are customized as per your true demand. Applications - Electric Flat Trailer Die handling; Portable machine base; Assembly mount; Metal coil transporter; Heavy equipment transporter with lift deck; Structural steel transporter; Shuttle cart for pipe; Pre-cast concrete production trailers; Portable base for jib arm with spreader beam. electric flat trailer, China, suppliers, manufacturers, factory, cheap, customized, price, made in China
These best over Ear Headphones are very good.Fit well, secure and unlike in-ear only, they don't fall out.The two moving coils are responsible for the treble and bass respectively . With the frequency division processing technology , the high and low audio frequencies are separated , and the sound is more hierarchical and explosive . These headphones with microphone have high fidelity pure sound quality.And component wire control , call clear. The weight of these sport earbuds actually is not too much less than most of headphone. But a fabric cord,one simple mic with volumn button and two pcs sleek earbuds , which will give you a simple and lightweight feeling on your daily basis for Skype calling,workout and more. Sport earphone High fidelity sound , respect each voice . OFC oxygen-free copper high-fidelity wire , better conductive performance , high sound fidelity . Headphones with Microphone Product description Product description Built-in 14mm large drive unit, bring High quality sound effects TPE environmental protection wire , soft anti-winding; Adjustable volume of the microphone shell , compatible with all 3.5 connections Mouth equipment . New image packaging design , exquisite fashion Looking for ideal Best over Ear Headphones Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Headphones with Microphone are quality guaranteed. We are China Origin Factory of Sport Earbuds with Microphone. If you have any question, please feel free to contact us.
Features: 1.Non-toxic.The HDPE material is non-toxic and tasteless. It belongs to green building materials and never scaling through the strict health test, which can effectively improve the water quality. 2.Low flow resistance. The Smooth inner wall is easy for pipeline transportation .Under the same condition, HDPE pipeâ??s delivery capacity can be increased by 30%, as its roughness is much less than that of steel pipe and glass reinforced pipe. 3. No Leakage. HDPE pipe is connected in the ways of butt fusion, socket fusion and electrofusion, which means the strength of joint point is higher than tube itself . 4. Excellent Flexibility. HDPE pipes could be coiled for the small diameter products. Also, it could be slightly bended for the large diameter products, which will be much more convenient in the construction site. 5.Good resistance ability for scratch. HDPE pipe is 4 times the wear resistance of steel pipe, which means HDPE pipe has longer service life and better economical efficiency. 6.Convenient for construction. PE pipe could be installed in a variety of trenchless ways, so it is very convenient for construction and installation. 7.Long life-span. Designed 50 yearsâ?? service life under rated temperature and pressure. 8.Lower operation and maintenance costs. HDPE pipe is not only convenient to transport and install, but also greatly reduce the workerâ??s labor intensity and improve work efficiency. HDPE Siphon Pipe, HDPE Drainage Pipe, HDPE Corrugated Pipe, HDPE Trenchless Pipe, HDPE Water Supply Pipe, HDPE GSHP pipe, HDPE Pipe Fittings Factory.
We are pleased to deliver HDPE gas pipe and HDPE electrofusion fittings, HDPE Pipe Floats, if any doubt to the quality of our products, we will certify to deal with it within 24hours upon receiving the quality objection. Features 1.Non-toxic.The HDPE material is non-toxic and tasteless. 2.Low flow resistance. The Smooth inner wall is easy for pipeline transportation .Under the same condition, HDPE pipeâ??s delivery capacity can be increased by 30%, as its roughness is much less than that of steel pipe and glass reinforced pipe. 3. No Leakage. HDPE pipe is connected in the ways of butt fusion, socket fusion and electrofusion, which means the strength of joint point is higher than tube itself . 4. Excellent Flexibility. HDPE pipes could be coiled for the small diameter products. Also, it could be slightly bended for the large diameter products, which will be much more convenient in the construction site. 5.Good resistance ability for scratch. HDPE pipe is 4 times the wear resistance of steel pipe, which means HDPE pipe has longer service life and better economical efficiency. 6.Convenient for construction. PE pipe could be installed in a variety of trenchless ways, so it is very convenient for construction and installation. 7.Long life-span. Designed 50 yearsâ?? service life under rated temperature and pressure. 8.Lower operation and maintenance costs. HDPE pipe is not only convenient to transport and install, but also greatly reduce the workerâ??s labor intensity and improve work efficiency. Tengyuan can supply municipal engineering pipe, dredging engineering pipe, HDPE Gas Pipe, Power Engineering Pipe, Mining Pipe and agriculture irrigation pipe, etc. Integrity is the foundation of us, as well as the guarantee for enterprise's sustainable development. Application: HDPE gas pipe is suitable for the gas conveying pipe system whose operating temperature range from -20â?? to -40â?? and long time maximum working pressure no more than 0.7 MPA.
Features 1. Non-toxic. The HDPE material is non-toxic and tasteless. It belongs to green building materials. 2. Excellent Flexibility. HDPE pipes could be coiled for the small diameter products. Also, it could be slightly bended for the large diameter products, which will be much more convenient in the construction site. 3. Good resistance ability for scratch. HDPE pipe is 4 times the wear resistance of steel pipe, which means HDPE pipe has longer service life and better economical efficiency. 4. Convenient for construction. PE pipe could be installed in a variety of trenchless ways, so it is very convenient for construction and installation. 5. Long life-span. Designed 50 yearsâ?? service life under rated temperature and pressure. 6. Lower operation and maintenance costs. HDPE pipe is not only convenient to transport and install, but also greatly reduce the workerâ??s labor intensity and improve work efficiency. How about HDPE Corrugated Pipe Price? Tengyuan as a supplier of HDPE gas pipe, HDPE irrigation pipe, HDPE Siphon Pipe, HDPE Drainage Pipe, UHMWPE Pipe, Plastic Floater, Rubber Hose and HDPE irrigation pipe fittings, etc. We are expecting long-term and win-win cooperation model with you. Application: HDPE cable protective pipe is widely used as protective sleeve pipe for underground power cable , communication cable and optical cable.
The mill is intended for manufacturing of round pipe of Φ10mm-Φ50mm with thickness of 0.5mmâ??2.5mm from cold-rolled and hot-rolled coil strip by means of unclosed tubular blank with its subsequent welding into tube, edge heating by means of solid state high-frequency welder, longitudinal seam welding in rolls of tube welding machine, cooling, further sizing or shaping and on-stream cutting of endless tube in measured lengths. Finished product will be of round, square or rectangular pipe. 1. The technical flow of the production line Steel Tapeâ??Double-head un-coilerâ??Strip-head Cutter and welderâ??Cage Loopâ??Forming sectionâ??High frequency induction welding unitâ??Flying saw under computer-controlâ??Run out table 2.Specification Diameter: Ï?601,420mm, Wall thickness: 3~120mm Length: 3~24m. Various materials: P91-92/T91-92, Q235, Q345, 45#, F52, A106B-C ,12CrMoV, etc. 3.Production Features: The machine has smart thermostat system,in the pipe expanding process,the intermedia frequency power can heat the steel pipe to desired temperature and maintain constant,so as to eliminate the unsafe factors due to too high pressure in the processing;The machine is featured with energy saving and simple operational procedure,could reduce labor costs.Besides, the real-time display and recording are available in the touch screen to guarantee the trace ability of the date. 4.Applications Steel Material:carbon steel, alloy steel, stainless steel,etc Steel Tube Type:seamless steel tube, straight welded steel tube, rolled steel tube, etc
This manual will assist you in installing, using and maintaining your flow meter. It is your responsibility to make sure that all operators have access to adequate instructions about safe operating and maintenance procedure. Operating Principle: Liquid flows through the turbine housing causing an internal rotor to spin. As the rotor spins, an electrical signal is generated in the pickup coil. This signal is converted into engineering units (liters, cubic meters, gallons etc.) on the local display where is applicable. Optional accessory modules can be used to export the signal to other equipment. Upon receipt, examine your meter for visible damage. The turbine is a precision measuring instrument and should be handled carefully. Remove the protective plugs and caps for a thorough inspection. If any items are damaged or missing, contact us. Make sure the turbine flow model meets your specific needs. For your future reference, it might be useful to record this information on nameplate in the manual in case it becomes unreadable on the turbine. Refer to the nameplate for your customized products specification. . Cautions for Installation turbine type flow meter 4.1 Mounting Positions â?¢ Pipes must be fully filled with liquids. It is essential that pipes remain fully filled at all times, otherwise flow rate indications may be affected and measurement errors may be caused Avoid Air Bubbles. If air bubbles enter a measurement pipe, flow rate indications may be affected and measurement errors may be caused Avoid all pipe locations where the flow is pulsating, such as in the outlet side of piston or diaphragm pumps. Avoid locations near equipment producing electrical interference such as electric motors, transformers, variable frequency, etc.
TOPFILL MB-2 TOPFILL MB-2 is Aluminosilicate, good dispersion, the high covering power, high whiteness, good suspension, good chemical stability, good plasticity, good light scattering and insulation. It can improve the absorbability, weather resistance, durability, scrub resistance, corrosion resistance and high temperature resistance of the coatings, improve the mechanical properties, increase the transparency, improve the fire resistance, can be used in anticorrosion, fire resistance, high temperature resistance, powder, building coatings, Reflective and heat-insulating coatings and various industrial and civil coatings, especially suitable for high-light semi-light coatings and other capacitors. It can replace titanium dioxide partially, eliminate the phenomenon of light flocculation caused by titanium dioxide, and prevent the paint from yellowing. Application 1. Civil building coatings: improve the adsorbability, weather resistance, durability, scrub resistance, corrosion resistance and high temperature resistance of coatings, can replace part of titanium dioxide, eliminate the phenomenon of photoflocculation caused by titanium dioxide, and prevent paint from yellowing, epecially to water-based coatings. It can greatly reduce the production costs. 2. Solid industrial coatings: reduce VOC, improve high temperature resistance, improve hardness and scrub resistance, control gloss, increase wear resistance, spray ability, reduce cost; 3. Solvent industrial topcoat, electrophoretic paint: increase solid content, reduce film permeability, enhance corrosion resistance, hardness, inertia, wear resistance, control gloss, reduce costs; 4. Maintenance coatings: chemical resistance and corrosion resistance, durability, wear resistance, low coating permeability, high addition and low cost; 5. Powder coating: improve fluidity, hardness, wear resistance, control gloss, good handle, reduce cost; 6. Coil steel coating: flexibility, corrosion resistance, luster control, higher solid content, reduce costs; 7. Primer: improve salt spray performance, high temperature resistance and chemical resistance, increase solid content, reduce cost; 8. Reflective and thermal insulation coatings: Prominent performance when used for decorative reflective heat insulation coatings.
Metal fence sharp blades razor and bto-22 razor barbed wire from china Â?¢razor barbed wire details Place of origin: hebei, china (mainland) Model number: bto-10, bto-12, bto-18, bto-22, bto-28, bto-30, cbt-60, cbt-65 Material: hot dip galvanized steel wire, stainless steel plate, hot dip galvanized iron wire Surface treatment: galvanized/pvc coated Type: barbed wire mesh Razor type: single coil/cross type Product name: razor barbed wire Blade thickness: 0.5mm Color: blue, green, yellow and more Wire diameter: 2.5mm Packing: water-proof paper inside and woven bag or carton outsideâ?¢packaging & delivery Packaging details Hot dipped galvanized razor barbed wire: 1. Inner packing with waterproof paper, outside with woven bag 2. With woven bag 3. Carton or pallet As per customers' request A container can hold 22 tonsâ?¢faq Q1: are you a direct manufacturer? A1: yes, we have specialized in razor wire for about 10 years. Q2: how can i trust your company? A2: we are iso 9001 certification company, and we support payment terms: l/c, t/t to ensure your safety. Q3: whatâ??s the moq of the razor barbed wire? A3: 1 ton. Q4: do you have other products? A4: yes, our factory also produces wall spike, welded mesh, galfan gabion, barbed wire, razor wire, chain link fence, wire mesh fence and more.
Razor barbed wire details: Place of origin: hebei, china (mainland) Model numbers: bto-10, bto-12, bto-18, bto-22, bto-28, bto-30, cbt-60, cbt-65 Material: hot-dipped galvanized steel wire, stainless steel plate, hot-dipped galvanized iron wire Surface treatment: galvanized/pvc-coated Type: barbed wire mesh Razor type: single coil/cross type Product name: razor barbed wire Blade thickness: 0.5mm Colors: blue, green, yellow Wire diameter: 2.5mm Packing: waterproof paper inside and woven bag or carton outside Â?¢ packing and delivery: Packing details: Hot-dipped galvanized razor barbed wire: 1. Inner packing with waterproof paper, outside with woven bag 2. With woven bag 3. Carton or pallet As per customer's requests A container can hold 22 tons Â?¢faq: Q1: are you direct manufacturer? A1: yes, we have specialized in razor wire for about 10 years Q2: how can i trust your company? A2: we are iso 9001 certification company and we support payment terms: l/c, t/t to ensure your safety Q3: what is the minimum order quantity of the razor barbed wire? A3: 1 ton Q4: do you have other products? A4: yes, our factory also produces wall spike, welded mesh, galfan gabion, barbed wire, razor wire, chain link fence, wire mesh fence.
Electronic specifications Total harmonic distortion 0.0015% Frequency response +/-0.5db from 4hz to 20, 000hz +0.5/-3db from 4hz to 68, 000hz (source dependent) Maximum volts out (balanced / unbalanced) 16/8 v rms Input impedance (balanced / unbalanced) N/a Phono voltage gain N/a High level voltage gain N/a Signal to noise ratio 110db Dual mono power supply No Dual mono, fully balanced Digital, fully balanced Connectivity Balanced inputs 0 Unbalanced inputs 0 Phono moving coil input 0 Phono moving magnet input 0 Digital coaxial input 2 Digital optical input 2 Digital mct (din) input 1 Digital usb input 1 (2.0, 32/192 asynchronous) 44.1khz to 384khz, 32-bit (pcm) dsd64, dsd128, dxd352.8khz, dxd384khz Digital aes/ebu input 0 Balanced fixed outputs 1 stereo Balanced variable outputs 1 stereo Unbalanced fixed outputs 1 stereo Unbalanced variable outputs 1 stereo Headphone output 1/4â?³ high drive Record processor loop No Input level match No Home theater pass through No Control Tone controls No Tone bypass and input assign No Rs232 control input No Power control output 1 Rear panel data ports 1 Rear panel ir sensor input Yes General specifications Multi-chassis or single Single Output meters No Tube or solid state Solid state On, power consumption 30 watts Weights & dimensions Dimensions (w x h x d) 17.5â?³ (44.45cm) x 3-7/8â?³ (9.8cm) x 16â?³ (40.64cm) Weight 13.5 lbs (6.1kg) Shipping weight 28 lbs (12.7kg)
Zhongtuo automatic high speed interchangeable ceiling t grid roll forming machine could be used to make Main T and cross T. Main T: equiped with inverter motor, producing in line speed: 30M per minute. Hydraulic automatic punching and cutting machine linked with main forming machine,punching and cutting automatically. Two heads and middle holes are punched and cut-off at the same time after forming. Cross T: equiped with both inverter and servo motor producing in line speed: 30M per minute. Main machine with constant speed,it is traced by the servo trace system, automatic tracing the speed of the main machine, punching and cutting automatically. Two heads and middle hole are punched and cut-off at the same time after forming. some technical parameters of ceiling t grid roll forming machine Decoiler Usage: It is used to support the steel coil and uncoil it in a turntable way. Passive uncoil pulled by roll forming system Loading capacity: 3T Uncoiling width: 500mm Inner diameter: 450-550mm Main roll forming machine: Feeding and flatting will make sure the steel is neat clean and straight. Roller fixer : Guide column Frame : middle plate welded Memorial arch frame type Drive mode: gear Diameter of shafts: Ï?40mm Shearing machine: Power supply : hydraulic power Frame : Pillar style with rack & pinion system Stroke switch : non-contact photoelectric switch Electic Control System: 1. Adopted PLC, transducer, touch panel from Delta Taiwan to ensure high speed with stability, precision and lifetime. 2.Other electric element are Delta 3. Equipped with movable switch, air break, radiator, transformer & electric leakage protector for operation convenience and safety. This kind of T grid roll forming machine is fully automatic. It can do punching and cutting automaticly. The final products can be packed directly.
Grade: 304/304l/316/316l Od:0.3mm~300mm Wt:0.08mm~1.5mm Length max: 22000mm Package:bundled with knitted plastic bag, wooden cases or according to customers' request. Payment terms:fob, cif As welded tubing As welded tubing is our least expensive product line, and is manufactured by running coils of annealed strip through a cold roll forming process. It is continuously welded using appropriate shielding gases for each alloy to prevent oxidation of the seam. With as welded tubing, the seam is clearly visible on both the exterior and interior of the tube, but the size of the weld bead is held within strict tolerances. Typical applications for as welded tubing include tubular heating elements for both industrial and consumer targeted end products, beverage or fluid transportation systems, mechanical devices, automotive applications, and heat exchange devices. Bead rolled tubing Bead hammered tubing is initially formed with a process identical to that of as welded tubing, except that an additional, special cold roll forming process with an interior mandrel support is added to smooth both the interior and exterior weld seam. As a result, the seam is nearly invisible on both the exterior and the interior, creating a tube that is an excellent, lower cost substitute for seamless tubing. Applications for bead hammered tubing include anything where interior and exterior smoothness are important, such as certain liquid and gas handling applications, and fabricated applications where exterior fittings require a smooth surface.
