Oil Separator 6221372850 6221372800 Industrial Compressor Parts.The oil mist filter for vacuum pump is my company independent research and development production of high efficiency filtration product, used for oil lubricated rotary vane vacuum pump exhaust the oil and gas separation device, installed in the vent pipe of the vacuum pump, in the process of vacuum pump operation, exhaust gas go through the filter, oil mist particles in liquid form cannot directly go through glass fiber filter paper, and then attached to the filter paper, clean gas is under certain pressure go through the glass fiber paper discharge smoothly, and to reduce pollution,ensure a clean environment. Data: Brand model size of interface sucking rate Nanfeng KF25 DN25 8L/S Product features: 1, Vacuum pump oil mist filter shell adopt imported high strength transparent material production, high temperature resistance, corrosion resistance, good appearance, and can directly observe the oil and gas separation condition; 2, Long service life, effectively filtering mechanical pump vent discharge of oil mist, filtration rate above 99%, can effectively reduce the air pollution, improve the working environment; 3, Filter material adopt imported glass fiber paper, stable performance and strong oil absorption; 4, The device is designed as a quick release v band clamp flange, quick installation and easily fitting with vacuum pumps exhaust pipe of different models and import brands . Replacement steps of exhaust filter: 1.After the vacuum pump stops, ensure that the system is under pressure. 2.Remove the quick release v band clamp flange on the filter. 3.Remove the oil mist filter and replace it with a new one. Note: when replacing the oil mist filter, it is better to replace the vacuum pump oil at the same time.
Oil Separator 6221372400 for Atlas Copco Screw Air Compressor Replacement Filter 6221372450.The oil mist filter for vacuum pump is my company independent research and development production of high efficiency filtration product, used for oil lubricated rotary vane vacuum pump exhaust the oil and gas separation device, installed in the vent pipe of the vacuum pump, in the process of vacuum pump operation, exhaust gas go through the filter, oil mist particles in liquid form cannot directly go through glass fiber filter paper, and then attached to the filter paper, clean gas is under certain pressure go through the glass fiber paper discharge smoothly, and to reduce pollution,ensure a clean environment. Data: Brand model size of interface sucking rate Nanfeng KF25 DN25 8L/S Product features: 1, Vacuum pump oil mist filter shell adopt imported high strength transparent material production, high temperature resistance, corrosion resistance, good appearance, and can directly observe the oil and gas separation condition; 2, Long service life, effectively filtering mechanical pump vent discharge of oil mist, filtration rate above 99%, can effectively reduce the air pollution, improve the working environment; 3, Filter material adopt imported glass fiber paper, stable performance and strong oil absorption; 4, The device is designed as a quick release v band clamp flange, quick installation and easily fitting with vacuum pumps exhaust pipe of different models and import brands . Replacement steps of exhaust filter: 1.After the vacuum pump stops, ensure that the system is under pressure. 2.Remove the quick release v band clamp flange on the filter. 3.Remove the oil mist filter and replace it with a new one. Note: when replacing the oil mist filter, it is better to replace the vacuum pump oil at the same time.
High performance For Kobelco replacement oil air separator filter P-CE03-572 For Air Compressor Parts.The oil mist filter for vacuum pump is my company independent research and development production of high efficiency filtration product, used for oil lubricated rotary vane vacuum pump exhaust the oil and gas separation device, installed in the vent pipe of the vacuum pump, in the process of vacuum pump operation, exhaust gas go through the filter, oil mist particles in liquid form cannot directly go through glass fiber filter paper, and then attached to the filter paper, clean gas is under certain pressure go through the glass fiber paper discharge smoothly, and to reduce pollution,ensure a clean environment. Data: Brand model size of interface sucking rate Nanfeng KF25 DN25 8L/S Product features: 1, Vacuum pump oil mist filter shell adopt imported high strength transparent material production, high temperature resistance, corrosion resistance, good appearance, and can directly observe the oil and gas separation condition; 2, Long service life, effectively filtering mechanical pump vent discharge of oil mist, filtration rate above 99%, can effectively reduce the air pollution, improve the working environment; 3, Filter material adopt imported glass fiber paper, stable performance and strong oil absorption; 4, The device is designed as a quick release v band clamp flange, quick installation and easily fitting with vacuum pumps exhaust pipe of different models and import brands . Replacement steps of exhaust filter: 1.After the vacuum pump stops, ensure that the system is under pressure. 2.Remove the quick release v band clamp flange on the filter. 3.Remove the oil mist filter and replace it with a new one. Note: when replacing the oil mist filter, it is better to replace the vacuum pump oil at the same time.
02250137-895 Oil Separator Element for Sullair Screw Air Compressor Repair Part LS10-40HP.The oil mist filter for vacuum pump is my company independent research and development production of high efficiency filtration product, used for oil lubricated rotary vane vacuum pump exhaust the oil and gas separation device, installed in the vent pipe of the vacuum pump, in the process of vacuum pump operation, exhaust gas go through the filter, oil mist particles in liquid form cannot directly go through glass fiber filter paper, and then attached to the filter paper, clean gas is under certain pressure go through the glass fiber paper discharge smoothly, and to reduce pollution,ensure a clean environment. Data: Brand model size of interface sucking rate Nanfeng KF25 DN25 8L/S Product features: 1, Vacuum pump oil mist filter shell adopt imported high strength transparent material production, high temperature resistance, corrosion resistance, good appearance, and can directly observe the oil and gas separation condition; 2, Long service life, effectively filtering mechanical pump vent discharge of oil mist, filtration rate above 99%, can effectively reduce the air pollution, improve the working environment; 3, Filter material adopt imported glass fiber paper, stable performance and strong oil absorption; 4, The device is designed as a quick release v band clamp flange, quick installation and easily fitting with vacuum pumps exhaust pipe of different models and import brands . Replacement steps of exhaust filter: 1.After the vacuum pump stops, ensure that the system is under pressure. 2.Remove the quick release v band clamp flange on the filter. 3.Remove the oil mist filter and replace it with a new one. Note: when replacing the oil mist filter, it is better to replace the vacuum pump oil at the same time.
Imported Fiber Glass Material Oil Separator Filter Element 89202022 for Ingersollrand.The oil mist filter for vacuum pump is my company independent research and development production of high efficiency filtration product, used for oil lubricated rotary vane vacuum pump exhaust the oil and gas separation device, installed in the vent pipe of the vacuum pump, in the process of vacuum pump operation, exhaust gas go through the filter, oil mist particles in liquid form cannot directly go through glass fiber filter paper, and then attached to the filter paper, clean gas is under certain pressure go through the glass fiber paper discharge smoothly, and to reduce pollution,ensure a clean environment. Data: Brand model size of interface sucking rate Nanfeng KF25 DN25 8L/S Product features: 1, Vacuum pump oil mist filter shell adopt imported high strength transparent material production, high temperature resistance, corrosion resistance, good appearance, and can directly observe the oil and gas separation condition; 2, Long service life, effectively filtering mechanical pump vent discharge of oil mist, filtration rate above 99%, can effectively reduce the air pollution, improve the working environment; 3, Filter material adopt imported glass fiber paper, stable performance and strong oil absorption; 4, The device is designed as a quick release v band clamp flange, quick installation and easily fitting with vacuum pumps exhaust pipe of different models and import brands . Replacement steps of exhaust filter: 1.After the vacuum pump stops, ensure that the system is under pressure. 2.Remove the quick release v band clamp flange on the filter. 3.Remove the oil mist filter and replace it with a new one. Note: when replacing the oil mist filter, it is better to replace the vacuum pump oil at the same time.
100007587 Oil Separator Element for Compair Screw Air Compressor Spare Parts L37KW 100013002.The oil mist filter for vacuum pump is my company independent research and development production of high efficiency filtration product, used for oil lubricated rotary vane vacuum pump exhaust the oil and gas separation device, installed in the vent pipe of the vacuum pump, in the process of vacuum pump operation, exhaust gas go through the filter, oil mist particles in liquid form cannot directly go through glass fiber filter paper, and then attached to the filter paper, clean gas is under certain pressure go through the glass fiber paper discharge smoothly, and to reduce pollution,ensure a clean environment. Data: Brand model size of interface sucking rate Nanfeng KF25 DN25 8L/S Product features: 1, Vacuum pump oil mist filter shell adopt imported high strength transparent material production, high temperature resistance, corrosion resistance, good appearance, and can directly observe the oil and gas separation condition; 2, Long service life, effectively filtering mechanical pump vent discharge of oil mist, filtration rate above 99%, can effectively reduce the air pollution, improve the working environment; 3, Filter material adopt imported glass fiber paper, stable performance and strong oil absorption; 4, The device is designed as a quick release v band clamp flange, quick installation and easily fitting with vacuum pumps exhaust pipe of different models and import brands . Replacement steps of exhaust filter: 1.After the vacuum pump stops, ensure that the system is under pressure. 2.Remove the quick release v band clamp flange on the filter. 3.Remove the oil mist filter and replace it with a new one. Note: when replacing the oil mist filter, it is better to replace the vacuum pump oil at the same time.
OEM 88290019-362 For Sullair Air-Oil Separator Screw Air Compressor Parts.The oil mist filter for vacuum pump is my company independent research and development production of high efficiency filtration product, used for oil lubricated rotary vane vacuum pump exhaust the oil and gas separation device, installed in the vent pipe of the vacuum pump, in the process of vacuum pump operation, exhaust gas go through the filter, oil mist particles in liquid form cannot directly go through glass fiber filter paper, and then attached to the filter paper, clean gas is under certain pressure go through the glass fiber paper discharge smoothly, and to reduce pollution,ensure a clean environment. Data: Brand model size of interface sucking rate Nanfeng KF25 DN25 8L/S Product features: 1, Vacuum pump oil mist filter shell adopt imported high strength transparent material production, high temperature resistance, corrosion resistance, good appearance, and can directly observe the oil and gas separation condition; 2, Long service life, effectively filtering mechanical pump vent discharge of oil mist, filtration rate above 99%, can effectively reduce the air pollution, improve the working environment; 3, Filter material adopt imported glass fiber paper, stable performance and strong oil absorption; 4, The device is designed as a quick release v band clamp flange, quick installation and easily fitting with vacuum pumps exhaust pipe of different models and import brands . Replacement steps of exhaust filter: 1.After the vacuum pump stops, ensure that the system is under pressure. 2.Remove the quick release v band clamp flange on the filter. 3.Remove the oil mist filter and replace it with a new one. Note: when replacing the oil mist filter, it is better to replace the vacuum pump oil at the same time.
For Kaishan Oil Separator for Part Number 3221117230 55170200230 L010804-055.The oil mist filter for vacuum pump is my company independent research and development production of high efficiency filtration product, used for oil lubricated rotary vane vacuum pump exhaust the oil and gas separation device, installed in the vent pipe of the vacuum pump, in the process of vacuum pump operation, exhaust gas go through the filter, oil mist particles in liquid form cannot directly go through glass fiber filter paper, and then attached to the filter paper, clean gas is under certain pressure go through the glass fiber paper discharge smoothly, and to reduce pollution,ensure a clean environment. Data: Brand model size of interface sucking rate Nanfeng KF25 DN25 8L/S Product features: 1, Vacuum pump oil mist filter shell adopt imported high strength transparent material production, high temperature resistance, corrosion resistance, good appearance, and can directly observe the oil and gas separation condition; 2, Long service life, effectively filtering mechanical pump vent discharge of oil mist, filtration rate above 99%, can effectively reduce the air pollution, improve the working environment; 3, Filter material adopt imported glass fiber paper, stable performance and strong oil absorption; 4, The device is designed as a quick release v band clamp flange, quick installation and easily fitting with vacuum pumps exhaust pipe of different models and import brands . Replacement steps of exhaust filter: 1.After the vacuum pump stops, ensure that the system is under pressure. 2.Remove the quick release v band clamp flange on the filter. 3.Remove the oil mist filter and replace it with a new one. Note: when replacing the oil mist filter, it is better to replace the vacuum pump oil at the same time.
6.2011.1 For Kaeser Oil Separator Filter Element Replacement.The oil mist filter for vacuum pump is my company independent research and development production of high efficiency filtration product, used for oil lubricated rotary vane vacuum pump exhaust the oil and gas separation device, installed in the vent pipe of the vacuum pump, in the process of vacuum pump operation, exhaust gas go through the filter, oil mist particles in liquid form cannot directly go through glass fiber filter paper, and then attached to the filter paper, clean gas is under certain pressure go through the glass fiber paper discharge smoothly, and to reduce pollution,ensure a clean environment. Data: Brand model size of interface sucking rate Nanfeng KF25 DN25 8L/S Product features: 1, Vacuum pump oil mist filter shell adopt imported high strength transparent material production, high temperature resistance, corrosion resistance, good appearance, and can directly observe the oil and gas separation condition; 2, Long service life, effectively filtering mechanical pump vent discharge of oil mist, filtration rate above 99%, can effectively reduce the air pollution, improve the working environment; 3, Filter material adopt imported glass fiber paper, stable performance and strong oil absorption; 4, The device is designed as a quick release v band clamp flange, quick installation and easily fitting with vacuum pumps exhaust pipe of different models and import brands . Replacement steps of exhaust filter: 1.After the vacuum pump stops, ensure that the system is under pressure. 2.Remove the quick release v band clamp flange on the filter. 3.Remove the oil mist filter and replace it with a new one. Note: when replacing the oil mist filter, it is better to replace the vacuum pump oil at the same time.
Unatex air compressor 0220701005 0220610001 oil filter 0220101021 Air filter.The oil mist filter for vacuum pump is my company independent research and development production of high efficiency filtration product, used for oil lubricated rotary vane vacuum pump exhaust the oil and gas separation device, installed in the vent pipe of the vacuum pump, in the process of vacuum pump operation, exhaust gas go through the filter, oil mist particles in liquid form cannot directly go through glass fiber filter paper, and then attached to the filter paper, clean gas is under certain pressure go through the glass fiber paper discharge smoothly, and to reduce pollution,ensure a clean environment. Data: Brand model size of interface sucking rate Nanfeng KF25 DN25 8L/S Product features: 1, Vacuum pump oil mist filter shell adopt imported high strength transparent material production, high temperature resistance, corrosion resistance, good appearance, and can directly observe the oil and gas separation condition; 2, Long service life, effectively filtering mechanical pump vent discharge of oil mist, filtration rate above 99%, can effectively reduce the air pollution, improve the working environment; 3, Filter material adopt imported glass fiber paper, stable performance and strong oil absorption; 4, The device is designed as a quick release v band clamp flange, quick installation and easily fitting with vacuum pumps exhaust pipe of different models and import brands . Replacement steps of exhaust filter: 1.After the vacuum pump stops, ensure that the system is under pressure. 2.Remove the quick release v band clamp flange on the filter. 3.Remove the oil mist filter and replace it with a new one. Note: when replacing the oil mist filter, it is better to replace the vacuum pump oil at the same time.
Stages of using the sterilization station 1- washing hands with water and soap 2- Drying hands 3- Disinfection of footwear 4- 360 disinfections for the whole body during drying up the hands (optional) 5- Disinfection of hands (optional) Sterilization station equipment 6- Photocell Soap Dispenser 7- Compulsory two-hand wash basin with sensor 8- Hand dryer 9- Sole cleaning brushes 10- 6 legs for fixing and changing the machine's height off the ground 11- Indicator lights to indicate the machine's condition 12- Welded drain tube behind the equipment 13- 2 stainless steel steps 14- Protective steel bars 15- Emergency stop button Other equipment that can be added to the sterilization station: Tissue box holder and a trash can Hair-net box holder and glove box holder Hand Sanitizer with Stainless turnstile gate Body essential for disinfection 8x spraying points for Body disinfection (360 Degree Rotation simultaneously) Sterilization station specifications 1. Sterilization station specifications 2. Type of protection: IP65 3. All parts of the sterilization station are made of 304 stainless steel 1.5 - 3mm 4. All wear parts are made from the highest-grade material 5. Strong Chassis - Insulated Welded - Industrial Design 6. Brush length: approx. 1000mm easily cleanable 7. Electrical connection: 220-250V / L + N + PE, 50-60Hz 8. Nominal power 1,0 kW 9. Control voltage valve and pump for disinfection and water: 24 V DC 10. Control voltage turnstile actuation: 24V DC 11. Control system: PLC Delta 12. Changeable parameters for all disinfections 13. Isolated electrical panel inside the body 14. Dimensions (LxWxH): 2700x1050x1750mm 15. Shipping dimensions (LxWxH): 2150x1200x2000mm
Conventional Double Column Vertical Lathe, Regarding the column heightening model, there is a double sliding column system. The cross beam can move up and down to achieve better cutting accuracy. As a professional CNC double column vertical lathe supplier, Sealion has several models of Double Column Vertical Lathe to be selected for the best cutting need. If you are interested in our double column vertical machining center, welcome to contact us! Application Fields of double column vertical lathe for sale Energy Earth Moving Die&Mold General Machining Engines View Similar Models Features of Conventional china cnc double column machining center The CNC double column milling machine is suitable for rough or fine machining of auto, bearing, wind power, motor, and water pump, etc. The base and column use one-piece high-quality castings. Hydrostatic Table. X&Z is using a brand linear guideway. The main transmission is driven by frequency or a servo motor, simple structure, and high transmission efficiency. Servo motor and gearbox directly drive the Ballscrew for X&Z axis feeding. It can reach high accuracy and fast-moving. Full cover is your optional together with a chip conveyor and coolant system. Handheld Unit. Twin spindle twin turret and twin spindle twin turret CNC lathe.
The price mentioned above is the net price(not including shipping) Introducing Aleppo Famous Laurel Soap, a traditional handmade soap with natural ingredients like Olive Oil, Bay Oil, and Water, combined with Sodium Hydroxide. It's free from artificial fragrance and dye. The soap is made in various compositions, ranging from 1% to 40% Bay Oil and 40% Laurel Oil. Al Kamal Laurel offers fast shipment of their 100% natural handmade Aleppo soap, following traditional methods. This soap, aged for at least 2 years, is a must-try for its ability to keep your skin moisturized, providing essential vitamins and minerals. Perfect for daily hand cleaning or body care, Aleppo soaps also offer long-lasting pleasant scents on your skin. The main ingredient of these soaps is olive oil, and they are entirely handmade using traditional methods. The cold production method preserves the active ingredients in the oils, ensuring no loss of quality. Aleppo soaps contain no synthetic substances. Aleppo soap, considered the ancestor of all soaps, has a rich history dating back thousands of years. Originating in the city of Aleppo, Syria, it is a natural soap produced from a mixture of olive oil and laurel oil. It's free from perfume, essence, colorant, preservative, chemical additive, or animal products. This soap is particularly effective in preventing dandruff, moisturizing and softening the skin. With rich vitamins A and E from laurel and olive oil, it nourishes and has antimicrobial properties, supporting skin strengthening and renewal. Suitable for all skin types, dermatologists recommend Aleppo soap as a hand-produced, traditionally crafted soap. The soap is made in large blocks, cut, and stamped with the manufacturer's prints. After manual cutting, the soaps are aged on shelves for at least 6 to 9 months, enhancing the quality. During this time, the soap's color transforms from olive green to dark golden yellow. Aleppo soap is ideal for skin cleansing and care, suitable for use on the face and body, even for irritated or sensitive skin. The unique combination of ingredients makes Aleppo soap a distinctive and versatile product for various skincare needs.
The oil mist filter for vacuum pump is my company independent research and development production of high efficiency filtration product, used for oil lubricated rotary vane vacuum pump exhaust the oil and gas separation device, installed in the vent pipe of the vacuum pump, in the process of vacuum pump operation, exhaust gas go through the filter, oil mist particles in liquid form cannot directly go through glass fiber filter paper, and then attached to the filter paper, clean gas is under certain pressure go through the glass fiber paper discharge smoothly, and to reduce pollution,ensure a clean environment. Data: Brand model size of interface sucking rate Nanfeng KF25 DN25 8L/S Product features: 1, Vacuum pump oil mist filter shell adopt imported high strength transparent material production, high temperature resistance, corrosion resistance, good appearance, and can directly observe the oil and gas separation condition; 2, Long service life, effectively filtering mechanical pump vent discharge of oil mist, filtration rate above 99%, can effectively reduce the air pollution, improve the working environment; 3, Filter material adopt imported glass fiber paper, stable performance and strong oil absorption; 4, The device is designed as a quick release v band clamp flange, quick installation and easily fitting with vacuum pumps exhaust pipe of different models and import brands . Replacement steps of exhaust filter: 1.After the vacuum pump stops, ensure that the system is under pressure. 2.Remove the quick release v band clamp flange on the filter. 3.Remove the oil mist filter and replace it with a new one. Note: when replacing the oil mist filter, it is better to replace the vacuum pump oil at the same time.
Features: 1.Sealing is energized by flow fluid pressure, sealing performance gets better while pressure increasing. 2.Hard-faced sealing surface and sulfur-resistant core material assure fine performance of wear-resistant and corrosion-resistant. 3.Integral forged body with fine mechanical properties. 4.Check valve shall be hydro tested prior to delivery for safe performance. Specifications: Product Name: API 6A Swing Check Valve, Lift Check Valve, One-Way Valve, Non-Return Valve Nominal Bore: 1-13/16" - 7-1/16" Material: AISI 4130 (Integral Forged) End Connection: API 6A Flange Standards Applied: API Spec 6A, API 16C, NACE MR0175 Pressure Rating: 2000 PSI to 15000 PSI Material Class: AA, BB, CC DD, EE, FF Temp Class:� L, P, R, S, T, U, V Performance Requirement: PR1, PR2 Product Specification Level: PSL1, PSL2, PSL3, PSL4 Paint Color: Red or Customized Application: Mud Choke Manifold, Kill Manifold, Wellhead Christmas Tree Connection
moisture %7-9,5 protein %12,5-14,5 starch %50-80 wet gluten %20-30 sedimentation ml 35-55 hectoliter kg/hl 65/85
Features may include: X-Factor II Deck The 7-gauge, X-Factor II Deck is fabricated from top to bottom, providing industrial-strength peace of mind that's reinforced with an exclusive limited lifetime warranty. Seating System A full-suspension seat provides added lateral stability and improved durability with vibration control for all-day comfort. Steel Chassis A heavy-duty, 1.5-inch x 3-inch steel, the singular tubular frame is fabricated with four engine frame isolation points to reduce cockpit vibration by 45% while lessening operator fatigue.
Ecoblaze Aspen Wood Briquettes We ensure our briquettes have the highest calorific density by weight possible to ensure that our customers get the best value for money. Each pack contains 8 Ecoblaze Aspen Wood Briquette logs. Premium Quality: Our Ecoblaze Aspen Wood Briquettes are compressed and dried to a moisture content typically under 20%. Ready-To-Burn accredited, guaranteeing the highest performance and efficiency. Sustainably Sourced: We ensure that we source the very best quality materials, from reliable and credible suppliers. Ecoblaze Aspen Wood Briquettes are the ideal choice for a high-quality, long-lasting burn, with hours of warmth! You can find more information in our Briquette Knowledge Base. Order your Ecoblaze Aspen Wood Briquettes today and experience the difference!
Hardwood including cherrywood, beech and maple in 16" cut. They are mechanically treated and kiln dried naturally to achieve a moisture content of approximately 30%. It is a clean and hassle free product that is ready to use, easy and quick to light, perfect for stoves and indoor or outdoor fireplaces. They are corded on a non-returnable pallet. 42 cu. ft. Cut firewood into 16 inches logs, already stacked on a pallet 100% Hardwood so long fire duration
Each whole crab is 3-4 lbs Wild-caught and flash-frozen to lock in that rich flavor Pre-cooked! (Just thaw, heat, and eat!) Each order may contain knuckles or pieces in addition to legs