CKM Defense Road Blocker CKM Defense Hydraulic Road Blocker is the most widely used system in areas where entry and exit should be controlled and safe against all kinds of vehicle attacks, such as military facilities, government buildings, embassies, production facilities, oil refineries, hotels, airports, and stadiums. The system is specifically designed against vehicle impacts, and its components have been reinforced to be effective in all possible attack scenarios. Thanks to its hydraulic operating system, the CKM Defense Road Blocker System works continuously even in the busiest places. This system synchronizes with other security systems such as swing barriers, rising bollards, etc., keeping the defense at the highest level in case of attack, while allowing authorized vehicles to safely enter the area. It can be integrated with all kinds of Access Control Systems such as Plate Recognition Systems, HGS (Electronic Toll Collection-Fast Pass) Systems, Card Readers. TECHNICAL FEATURES Unit operating voltage: 380 VAC, 3-Phase, 50/60 Hz Length: 3111 mm, 4111 mm,5111 mm, 6111 mm �±20 mm Height above ground: 780 mm �± 10 mm The part buried under the ground: 1050 mm �±10 mm Width: 1350 mm �± 10 mm Color: Yellow Black Painted (RAL 1028, 9005) Collision unit: Steel Sheet and NPU NPI steel bar construction Wall thickness: 10 mm Surface coating: Electrostatic painted Corrosion coating: Shot blasting, epoxy under coating, electrostatic painted Turn On/Off Time: 4-6 sec. Emergency Take Off Feature: 2-3 sec. (optional) Turn On/Off Capacity: 1000 / day Power Engine: 4 kw or 5 kw , 380 V AC, 3-Phase Operating temperature range: -25 / 60 C Work System: Hydraulic system Hydraulic piston: 2 qty Hydraulic power unit: Industrial hydraulic pump, oil level and temperature gauge, manual hand pump Automation routing: 220 V two way solenoid valve Hydraulic pressure: 40-80 Bar Hydraulic tank: 30-50 liter Hydraulic hose: R2 3/8 330 Bar hose Hydraulic oil: 46 no. hydraulic oil Hydraulic system heating/cooling: Oil heater/cooler (optional) Control Cabinet: Cabinet Dimension: 900 x 900 x 700 mm (height, length, depth) Control System: Remote control,button control (optional), access systems (optional) Control Panel: Compatible with PLC base control, micro process control card, access systems devices (Access card, plate recognition system, finger print reader etc.) Manual Usage: Manuel hand pump, Warning Equipment: Warning light (optional), traffic lamp (optional), sound warning (optional) Protection System: Loop detector, photocell (optional) Drain pump: Optional concrete Infrastructure: C 35 concrete Power failure working status: Battery (optional)
Chemical Name : N,N-m-phenylene bismaleimide Molecular Formula: C14H8N2O4 Molecular Weight: 268.23 CAS NO. :3006-93-7 Specifications Item powder Oiled Powder Appearance Yellow or brown powder Initial Melting Point 198.0 198.0 Loss on Drying% 0.50 0.50 Ash% 0.50 0.50 Residue on 150¼m Sieve,% 0.10 0.10 Oil content,% ---- 1.0~2.0 Strength ---- ---- Physical property Density at 20â??(kg/m)3 950 950 Properties: Yellow or brown powder, soluble in THF and 1.44 share of hot acetone, insoluble in petroleum ether, chloroform,benzene and water, melting point 195 C or more. Applications: PDM as a function of rubber chemicals in rubber processing for the curing agent can also help the system can be used for peroxide curing agent, also can be used as anti-scorching agent and tackifier, both for general-purpose rubber, also applies to special rubber and rubber and use system. In natural rubber, and sulfur coordination to prevent reversion to improve the heat resistance, reduce heat, anti-aging, improve adhesion of the rubber and tire cord and the vulcanized rubber modulus. Shoulder for load tire rubber, rubber buffer layer, solve the problem of bias truck tire shoulder separation can also be used for large-size thick natural rubber products and various rubber sundries. PDM can be used as auxiliary curing agent, can significantly improve the correlation performance, increase heat resistance, suitable for high temperature curing system, reducing the compression is very obvious, but also reduce the amount of peroxide, preventing the processing of rubber in the focus burning, improve tire cord and rubber and metal bond strength. PDM is a non-sulfur vulcanizing agent for rubber cable, it can replace thiazoles, thiuram and all sulfur vulcanizing agent, solution of copper wire and copper electrical generation due to exposure to sulfur vulcanizing agent black copper sulfide contamination problems. As scorch agent for the 0.5-1.0 copies, as curing agent for the 2-3, to improve the compressive deformation of 1.5 copies, improve the adhesive strength of 0.5-5.0 copies. Package: 25kg plastic woven bag, paper with plastic film bag, kraft paper bag. Storage: Should be stored in a cool, dry, well ventilated place, packaged products should avoid direct sunlight. Notes: This product is oil based on user needs, treatment or granulation.
1. Material GB/T 6728: Q195, Q215, Q235, Q345B; ASTM A500: Grade A, Grade B, Grade C; EN 10219: S235JR, S275JR, S355JR; AS 1163: C250, C350, C450; JISG 3466: STKR400, STKR490 2. Production range and sizes. SIZE: 12.7*12.7 â?? 150*150 MM; 20*30 â?? 100*200 MM. THICKNESS: 0.6 â?? 4.0 MM. As chart above shows, we can produce these sizes ranged. And many special sizes are not listed here. So pls contact me directly if you donot find your required sizes. 3 .Standard. Our products are produced strictly according to standard GB/T 6728. And following standards can also be fulfilled: ASTM A500, BS EN 10219, AS 1163, JIS G3466. 4 .Length. Common lengths have 4M, 5.8M, 6M, 8M, 11.8M, 12M and many other lengths. Length can be customized according to customer requirement. 5. Surface Treatment: â?? Oiled. Slightly oiled the pre galvanized square and rectangular tubes surface with anti-rust oil can protect the goods for long-time shipment. â?? Color Painting. Normally red, white, black or many other colors. We can process according to customer required RAL number. â?? Powder Coating. High qualified powder, offering stable quality and long lifetime, suitable for Australia market. â?? Plain end. Direct square cut of tubes. â?? Threaded, including NPT, BPT and BS 4568 thread. Coupling and plastic cap can be offered together. 6 .Package: In bundles, and wrapped with waterproof PVC cloth. 7 .Shipment: By container (20â??GP, 40â??GP, 40â??HC) or by bulk vessel. 8 .Payment: T/T, L/C or western union. 9 .Application: Pre galvanized square and rectangular tubes are economic, bright, light and smooth. They are widely used in solar tracker storage rack, roofing, farm gate, decoration, furniture manufacturing, and fences and so on. 10. Advantage: Our production department are with more than 13 years experience and are highly trained for the handling and operation in production. Our company have unique anti-rust material which would be added during the water cool procedure after welding. The anti-rust material can protect the pre galvanized square and rectangular tubes well from white rust. Our company totally have 9 production lines for pre galvanized square and rectangular tubes. This ensure all sizes can be produced quickly and stock are enough.
Red sandalwood, white sandalwood, teak wood, rose wood, agar wood, logs, cut piece, chips, oil.
PRODUCT DESCRIPTION The botanical name for flax of . Flax is a versatile, blue-flowered crop. The seeds for food products are harvested and then sieved through screening systems, resulting in a clean, uniform batch of whole seeds considered 99.9% pure, or human food grade. The seed itself is flat and oval with a pointed tip. It is a little larger than a sesame seed and measures about 4-6mm. The seeds have a crisp chewy texture and a pleasant, nutty flavor. Flax seeds range in color from a deep brown to a light yellow. Seed color is determined by the amount of pigment in the outer seed coat, the more pigment, the darker the seed. Seed color is easily modified through simple plant breeding techniques. Brown flaxseed is light brown to black in color. COMPOSITION Flax is rich in fat, protein, and dietary fiber. An analysis of Canadian flax averaged 41% fat, 20% protein, 28% total dietary fiber, 7.7% moisture and 3.4% ash, which is the mineral-rich residue left after samples are burned. The composition of flax can vary with genetics, growing environment, seed processing and method of analysis. The protein content of the seed decreases as the oil content increases. The oil content of flax can be altered through traditional plant breeding methods, and it is affected by geography. The cool night of northern Canada improves oil content and quality. Flax is extremely rich in Omega 3 and linolenic acid. NUTRITIONAL INFORMATION/100G Energy 2090 kJ-506kcal 27% Moisture 6-10% Protein 20.2g Lipid 36.6g with Saturated Fatty Acid: 3.67g Available Carbohydrate 6.6 with sugar: 1.55g Fibers 27.2g Calcium 228mg Sodium 20.5mg Salt 0.051g Phosphorus 505mg Magnesium 360mg Iron 7.8mg Zinc 4.0mg TYPICAL FATTY ACID & COMPOSITION Polyunsaturated (Omega 3s) 57% Monounsaturated 18% Polyunsaturated (Omega 6s) 16% Saturated 9% TYPICAL AMINO ACID & COMPOSTION (g/100g protein) Alanine 4.4 Arginine 9.2 Aspartic Acid 9.3 Cystine 1.1 Glutamic Acid 19.6 Glycine 5.8 Histidine 2.2 Isoleucine 4.0 Leucine 5.8 Valine 4.6 Lysine 4.0 Methionine 1.5 Phenylalanine 4.6 Proline 3.5 Serine 4.5 Threonine 3.6 Tryptophan 1.8-NR Tyrosine 2.3 APPLICATION: Baking, raw and cooked snacks, dietary supplement, milling, and oil extraction. STORAGE: Store in cool (20 degrees Celsius), dry location away from sunlight. EXPIRATION: Product use within 24 months of manufacture. ADDITIONAL INFORMATION: This ingredient is non-GMO, nor does it contain GMO products. This ingredient does not undergo ionizing treatment. Flax does not contain gluten. Flax is a non-allergenic product. Flax is cleaned to 99.9% pure but may have come in contact with trace amounts of wheat, soybean, or mustard from agricultural cross-contamination (in the field) only.
APPLICATION Work with oxygen, acetylene, L.P.G. and non-combustible gases. Produced according to BS 5120, ISO 3821, EN 559, DIN 8541, SIS 278265, I.S. 714. CONSTRUCTION Tube: Seamless. Synthetic rubber suitable for welding gases. Reinforcement: High tensile synthetic fibers. Cover: Red, blue, black, Construction: Inner Tube:Black Extruded SBR & NR synthetic rubber Reinforcement:High tensile synthetic polyester yarn multi-spiral. Cover:High tensile synthetic abrasion and weather resistant rubber, smooth blue, red, or green Cover. Working Pressure:Constant Pressure 20 Bar / 300 psi Temperature Range:-30+80 (-22 F 176F) Application:Mainly used to convey oxygen and acetylene gases for welding and cutting equipment, inert gas (such as argon gas and helium gas etc.) Feature: Mandrel extrusion technology Free OEM Color & Brand Service Packing as customer request Welding hose also called flexible reinforced welding hose, rubber twin welding hose, reinforced twin welding hose pipe line. It is mainly used for conveying of oxygen and acetylene for welding and cutting equipment. The appearance of the twin line hose is bright. The body is soft and light, which is hardly distortedunder pressure. Sizes:3/16, 1/4, 5/16, 3/8, 1/2 Gas transporting: oxygen, acetynele, carbon dioxide, nitrogen propane, liquefied natural gas. Our welding hoses are widely used in automobile, shipbuilding, steel structure construction, railway, nuclear power, chemical, tunnel, nechanical processing and other field. The welding rubber hose is mainly used for conveying of oxygen and acetylene gases for welding and cutting equipment. Abrasion resistant, weather resistant and zone resistant. It is flexible, light weighted, anti-bending. Our Twin Welding Hose is made of black synthetic rubber with high tensile synthetic textile reinforcement. Hose is resistant to oxygen and acetylene. Rubber Welding Hose needs a flexible and rugged Hose Pipe for the flow of Air-Oxygen and a Fuel Gas like Acetylene among other. Synthetic Rubber with special treatment for Flame, Heat and Oil resistance is being used to produce this hose. Special treated synthetic yarns are used for reinforcement.
Description HC-AHR Slurry pump parts Wear Resistance Impellers Product Advantages: 1.The rubber wet parts are great wear resistance and corrosion resistance, usually used for acid working condition .Such as tailing in mining industry .slurry with small particles and no rough edges. 2.The rubber spare parts are made of Nature Rubber, code is SR26 SR55 and SR33 ,which gurantees excellent and higher operating temperature range from -40-75. 3.The Rubber impeller dimension is same with metal impeller .We also could offer Rubber slurry pump with metal impeller. Impeller is the most important spare parts of a centrifugal slurry pump. Centrifugal force which procesing the slurries 4.Rubber pump liners-Easily replaceable liners and bolted not glued , to the casing for positive attachment and ease of maintenance. 5.Higher productivity, increased profitability and eas e maintenance 6.Provide the best quality product s with reasonable price and good after-sales service. Material nature rubber: Rubber slurry pump impeller 1. R08 is a black natural rubber, of low to medium hardness. R08 is used for impellers where superior erosive resistance is required in fine particle slurry. The hardness of R08 makes it more resistant to both chunking wear and dilation (i.e.: expansion caused by centrifugal forces) as compared to R26. R08 is generally only used for impellers. 2. R26 is a black, soft natural rubber. It has superior erosion resistance to all other materials in fine particle slurry applications. The antioxidants and antidegradents used in R26 have been optimized to improve storage life and reduce degradation during use. The high erosion resistance of R26 is provided by the combination of its high resilience, high tensile strength and low Shore hardness. 3. Elastomer S12 is a synthetic rubber which is generally used in applications involving fats, oils and waxes. S12 has moderate erosion resistance. Usage: mining,derding,water treatment and so on Standard or Nonstandard: Standard Pressure: High Pressure Color: depend on customer's requirements Our Service 1.Quick Reply Your inquiry related to our products or prices will be replied within 12 hours. 2.We have a group of high quality technicians with rich experience who can solve everything during the whole process. 3.Guarantee quality, All the products have proved by ISO 9001:2008,And also will be inspected strictly before delivery. 4.Perfect after -sales .We will be responsible for the whole life period 5.OEM order. Many material are available ,like High chrome, rubber , stainless steel and etc.
These are leaves which are harvested and dried from farms in Ghana (West Africa). They are organically grown and hand harvested to ensure high quality and a GMO-free status. The dried Moringa leaves can be used to brew your own tea without using teabags or enhance your daily salad. Our moringa leaves are grown organically by our patented that ensures you get the highest quality, Non-GMO moringa leaves. With 15 times the potassium of Bananas, 17 times the calcium in milk, and 19 of the 20 amino acids, our moringa leaves contain the rare combination of nutrients that make the Moringa tree so special. Besides, according to the current scientific research, the moringa leaves have specific medicinal benefits due to their unique and high nutritional value. They are said to regulate high and low pressure, and also hormonal and Cholesterol levels. They also prevent obesity by stimulating metabolism. Furthermore, Moringaâ??s antioxidant make has given this product anti-carcinogen and cleansing properties which get rid of bad cells from the body. Moringa leaves are packed with more than 90 essential ingredients including the 19 types of amino acids, more than 35 anti-inflammatory compounds, 40 plus antioxidants, minerals, protein, key vitamins, phytonutrients, Omega, 3, 6, and 9 oils. Only a few foods in the world can match the nutrition level provided by our dried Moringa leaves. Besides, our dried Moringa leaves are carefully sun-and-shade dried at an ideal low temperature so as to preserve its nutrients and swiftly packaged to maintain the freshness. Some of the sellers use industrial machines to heat, dry or freeze dry their Moringa leaves. We use the sun! You can see the results in the bright green colors and the early smell of Moringa. We get our Moringa leaves from the small organic farms where the Moringa tree originates. We can attest to the purity and quality of every Moringa product we sell. How we harvest the moringa leaves We strip the leaflets from moringa leaf petioles. This is done directly from the branches. After discarding the damaged leaves, we carefully wash the Moringa leaves to remove dirt. Once we are done with washing them, we naturally dry the leaves using the sunlight. Attributes Stimulates the sympathetic nerve endings Accelerates heartbeats and constrict blood vessels Inhibits movements of involuntary movements of gastrointestinal tract Acts as an antitubercular and used to treat leaver diseases In large quantities, it prevents the growth of fungus Inhibits of gram-positive and gram-negative bacteria Applications of Moringa leaves Applied in cosmetic field as a natural raw material of a neutral detergent and it can be added in hear shampoo and other detergents It is applied in health product field as raw of healthcare products to enhance the immune of a human body. As a raw material of drugs for anti-depressants, sedation, anti-tumor, and anti-bacterial, it is used in pharmaceutical fields
Common Name Phoxim Chemical Name A-[[(diethoxyphosphinothioyl)oxy]imino]benzene-acetonitrile Cas NO. 14816-18-3 Mol. Wt. 298.3 �º C M. F. C12H15N2O3PS Specifications 92% TC, 40% EC, 50% EC, 75% EC, 5% GR Physical & chemical properties Appearance: Yellow liquid; (tech., reddish-brown oil). M. P.: 6.1 �º C B. P.: Decomposes on distillation V. P. 2.1 MPa (20 �º C) K OW logP = 3.38 Henry 4.18�? 10-1 PA m3 mol-1 (calc. ) S. G. /density 1.178 (20 �º C) Solubility In water 1.5 mg/l (20 �º C). In tolu ene, n-h exane, dichl oromethane. Slightly soluble in aliphatic hydrocarbons, vegetable and mineral oils. Stability relatively slowly hydrolysed; DT50 (est. ) 26.7 d (pH 4), 7.2 d (pH 7), 3.1 d (pH 9) (22 �º C). Gradually decomposed under u. V. Irradiation. Toxicity Oral Acute oral LD50 for rats: >2000 mg/kg. Skin and eye Acute percutaneous LD50 for rats: >5000 ml/kg. Not irritating to eyes or skin (rabbits). Inhalation LC50 (4 h) for rats >4.0 mg/l air (aerosol). ADI (JMPR): 0.004 mg/kg b. W. [1999]. Toxicity class WHO (a. I. ) II; EPA (formulation) III EC hazard Xn; Birds LD50 for hens 40 mg/kg. Fish: LC50 (96 h) for rainbow trout 0.53, bluegill sunfish 0.22 mg/l. Daphnia LC50 (48 h): 0.00081 mg/l (80% premixes) Bees: Toxic to bees by contact and respiratory action. Applications It's a strong contact insecticide, stomach poison and has a clear effect for larva of Lepidoptera, insects of warehouse mosquito, flying and older cotton bollworm, and a long-effect for insects of subterranean. Application on leaf is short-effect and non-remain. Widely used for prevention and cure of insects for cotton, fruittree, vegetable, soyabean, tea, mulberry etc., such as aphid, thrips, soil, it can prevent and cure of black cutworm, click beetle, peach fruit, borer etc., and dispoes of seed of whear, corn & peanut, also for insects of soil, such as mole cricket, click beetle and so on spraying it can prevent and cure of mosquito and flying etc.
Water repellent fabric Drotex is a professional manufacturer of all kinds of safety workwear fabrics since 1998. We hope to build a long-term business relationship with customers from all over the world in the future. Water repellent fabric 1.Product introduction of the Water repellent fabric The Water repellent fabric has a physical property that is seemingly repelled from a mass of water.It is usually used in protective clothing industry. It has wide applications,such as oil gas company,roadway safety,chemical industry,etc. 2.Product parameter (Specification) of the Water repellent fabric Product name Water repellent fabric Material Cotton,CVC or T/C(Cotton Polyester Blend) Weight As customers requirement Width 57/58" Structure Twill/Satin/Ripstop Color Black,navy,grey,light blue,etc Function Water repellent Usage Protective clothing Shrinkage â?¤±3% Color fastness 4-5 grade Abrasion Resistance 4-5 grade Certificate EN 13034,EN 343 MOQ 1000 meters Service Quick Response,Lab dip,Test Report,Excellent Reception Payment T/T,L/C,Western Union,Paypal Packing plastic roll, inside with plastic bag, outside with woven bag 75m-100m /roll Sample Free sample available 3.Product Feature And Application of the Water repellent fabric If a fabric is labeled as "water repellent",it means that it is hydrophobic.This entails that the product actually has physical properties that,as the label suggests,repels water on contact.Water-repellent products are generally built with special materials and techniques. Using the Water repellent fabric technology, processed on the surface of fabric like the effect of leaf rolling the hydrophobic function, also has oil-proof feature, and by the treated fabric remained the original features, treatment of clothing is more easy to clean. 4. Production details of Drotexs Water repellent fabric 5. Product Qualification of the Water repellent fabric Water repellent fabric can meet AATCC 22,ISO 4920,EN 13034,EN 343. Our fabrics are certificated by ASTM,EN,NFPA,UL,etc and are very popular in European and American Market. 6. Deliver,shipping and Serving of the Water repellent fabric. We promise to finish the production and deliver the cargo on time,track the cargo transition,and tell customer the pick-up time.We are glad to answer customers questions and provide technical guidance free.Also well recommend new products for our customers. 7. FAQ Which kind of water repellent fabric is suitable to me ? Water repellent non-breathable suit for those wanting complete water protection however may become uncomfortable during wearing.
chemical resistant fabric Xinxiang Zhuocheng Special Textile Co., Ltd is a professional manufacturer of all kinds of protective workwear fabrics since 1998. We hope to build a long-term business relationship with customers from all over the world in the future. chemical resistant fabric 1.Product introduction of the chemical resistant fabric The chemical resistant fabric is mainly used for making protective workwear. It has wide applications,such as oil gas company,roadway safety,chemical industry,etc. 2.Product parameter (Specification) of the chemical resistant fabric Product name chemical resistant fabric Material Cotton,CVC or T/C(Cotton Polyester Blend) Weight As customers requirement Width 57/58" Structure Twill/Satin/Ripstop Color Black,navy,grey,light blue,etc Function Chemical resistant Usage Protective workwear Shrinkage â?¤±3% Color fastness 4-5 grade Abrasion Resistance 4-5 grade Certificate EN 13034,EN 343 MOQ 1000 meters Service Quick Response,Lab dip,Test Report,Excellent Reception Payment T/T,L/C,Western Union,Paypal Packing plastic roll, inside with plastic bag, outside with woven bag 75m-100m /roll Sample Free sample available 3. Product Feature And Application of the chemical resistant fabric The chemical resistant fabric is one of our major products.It is finishing to be chemical resistant.At the same time this fabric has good air permission.It can pass the performance requirements for protective clothing safety and sanitation standards. Using the chemical resistant technology, processed on the surface of fabric like the effect of leaf rolling the hydrophobic function, also has oil-proof feature, and by the treated fabric remained the original features, treatment of clothing is more easy to clean. 4. Production details of Drotexs chemical resistant fabric 5. Product Qualification of the chemical resistant fabric chemical resistant fabric can meet AATCC 22,ISO 4920,EN 13034,EN 343. Our fabrics are certificated by ASTM,EN,NFPA,UL,etc and are very popular in European and American Market. 6. Deliver,shipping and Serving of the chemical resistant fabric. We promise to finish the production and deliver the cargo on time,track the cargo transition,and tell customer the pick-up time.We are glad to answer customers questions and provide technical guidance free.Also well recommend new products for our customers. 7. FAQ Will non-treated 100% cotton and other natural fibers help protect against possible burn injury? Non-treated cotton and wool are flammable fibers. If exposed to electric arcs and flash fires, these materials will continue to burn causing possible severe injury and death.
DESCRIPTION ITSEAL is truly developed for sealing window frames with highly durable and flexible properties to withstand severe weathering and extreme temperatures. It seals small gap that normal sealant cannot reach and penetrate. It provides a truly watertight seal deep into minute joint and gap. FEATURES * ITSEAL is the only waterproof sealer that is completely watertight. * It is highly water repellent that no water can get through it during storm. * It adheres well on aluminum and glass * Once dried, ITSEAL is flexible and accommodate joint movement due to vibration. * Mill finish aluminum, oil or wet surfaces can also be well-sealed. VOC CONTENT Type of Regulated Adhesive under the Air Pollution Control (Volatile Organic Compounds) Regulation of Hong Kong: Architectural Sealant VOC Content (Ready to use): 248g/Ltr. SURFACE PREPARATION For maximum adhesion, the adhesive surface must be free of dust, release agent, oil and grease. Wipe surface with solvent is recommended. Solvent are obtainable from ITLS-SB. This information in this catalogue is provided to the best of our knowledge from results gathered both internal and external credited laboratories. However, we have no control over site applications, site conditions and workmanship of the applicator. We therefore will not accept any liability, either directly or indirectly arising from the misuse of these products or when the product is used not in accordance with any advice, specification, and recommendation of information given by us, The user is responsible for checking the suitability of these products for its intended use. APPLICATION ITSEAL can be used with hand operated or air operated grease pump. Other simple extruding device can also be used but it has to be solvent resistance. LIMITATION * Not suitable large gap wider than 5 mm wide and deep. For deeper joint fill to half of it, let it dry overnight and fill it up the next day. * Not suitable for use as expansion joint. COLOUR AND PACKING 26 kg / pail Grey/Black/Bronze/White SAFETY INFORMATION * ITSEAL is flammable. Please keep away from sources of ignition during application. * Avoid breathing in solvent by wearing solvent vapor respiratory mask in badly ventilated area or confined space. * Avoid contact with skin and eyes. If swallowed please contact doctor immediately. * ITSEAL meets the requirement of RoHS regulation of European Union and it does not contain eight heavy metals which were restricted by ASTM F963 or EN71 part3. * Please read the Material Safety Data Sheet in regards to flammability and health and hazard. SHIPPING/STORAGE INFORMATION ITSEAL must be stored in a cool place under 25°C and away from direct sunlight. The shelve life is 12 months if stored in accordance to the recommendation. Dangerous Goods Information: Cement Adhesive, Class 3, UN1133 PG III.
Specification Details: 1) Gr. 4130 Chemical Component Analysis(%): C: 0.28-0.33; Mn: 0.40-0.60; Si: 0.15-0.35; S: < 0.040; P: < 0.040; Cr: 0.80 -1.10; Mo: 0.15-0.25; 2) Monthly Capacity: 6000 tons. 3) 4130 SR Condition's Mechanical Properties: Ultimate Strength: > 724Mpa; Yield Strength: > 586Mpa; Elongation: > 10%; Rockwell Hardness B Scale: 95; 4) Delivery Condition: Annealed(A), Bright Annealing, Normalized(N), Stress Relie f Or Finish Anneal(SR), Quenched and Tempered(Q+T), etc; 5) Surface treatment: ASTM A519-Temporary Coating, Special Coating, Galvanized, immersion oil, lacquer, passivation, phosphating, etc; Or Oil-DIP paint black with two plastic caps on each end 6) Inspection: Strictly according to the standard requirements and offer the original MTC (EN10204.3.1/3.1B) 7) Relevant Test: ASTM 519-Chemical Component Analysis, Mechanical Properties(Ultimate tensile strength, Yield Strength, Elongation), Technics Properties(Flattening Test, Flaring Test, Bending Test, Hardness Test, Blow Test, etc), Exterior Size Inspection, Nondestructive electric Test, Hydrostatic Test, magnetic particle testing; 8) Marking: All tubes are eddy current tested and are marked with size, cast number and specification. Or as per customer's requirement; 9) Packing: Hexagonal bundles with several steel strips, Wrapped in waterproof paper, PVC sleeve, and sackcloth with several steel strips or packed in heavy tri-wall boxes, wooden boxes, wooden slats as requires; 10) Packing Type: Round, Square, Rectangle, Hexagon. Streamline, etc; 12) Applications: Automobile Industry, Mechanical & Engineering, Fluid Power, etc. 13) Place of origin: China 14) whatsapp: 0086 13812877559 15) e-mail: tubesolution at sina.com Commercial Information: 1) Delicery time: (45-60) days ready at mil also according to the actual weightl; 2) Minium order: 5 Ton; (some specification are excepted) 3) Term of payment: T/T or L/C; 4) Delivery Port: Shanghai Port; 5) Offer Validity: 5-7 Days; 6) Container: 20GP or 40GP or Bulk; 7) Manufacture methods: Cold Finished method or hot finished Method.
ASTM A178 Electric-Resistance-Welded Carbon Steel And Carbon-manganese steel boiler and superheater tubes Tube Details: 1) A178 Chemical Component Analysis(%): Gr. A: C: 0.06-0.18; Mn: 0.27-0.63; P: < 0.035; S: < 0.035; Gr. C: C: < 0.35; Mn: < 0.80; P: < 0.035; S: < 0.035; Gr. D: C: < 0.27; Mn: 1.00-1.50; P: < 0.030; S: < 0.015; Si: > 0.10 2) Tensile Requirements: Gr. A: Tensile strength Min. 47Ksi; Yield Strength Min. 26Ksi, Elongation: 35%. Gr. C: Tensile strength Min. 60Ksi; Yield Strength Min. 37Ksi, Elongation: 30%. Gr. D: Tensile strength Min. 70Ksi; Yield Strength Min. 40Ksi, Elongation: 30%. 3) Manufacture Method: Electric-Resistance Welding; 4) Surface treatment: ASTM A178 & ASTM A450-Temporary Coating, Special Coating, Galvanized, immersion oil, lacquer, passivation, phosphating, etc; Or Oil-dip paint black with two plastic caps on each end 5) Quality Test: ASTM A450-Chemical Component Analysis, Mechanical Properties(Ultimate tensile strength, Yield strength, Elongation), Technics Properties(Flattening Test, Flaring Test, Bending Test, Hardness Test, Blow Test, etc), Exterior Size Inspection, Nondestructive electric Test, Hydrostatic Test, magnetic particle testing; 6) Packing: Hexagonal bundles with several steel strips, Wrapped in waterproof paper, PVC sleeve, and sackcloth with several steel strips or packed in heavy tri-wall boxes, wooden boxes, wooden slats as requires; 7) Applications: Boiler and Heat Exchanger(Wal panel, economizer, reheater, superheater and steam pipeline of boilers), Hydraulic and Petrochemical Purpose, etc. 8) Origin: China Commercial Information: 1) Delicery time: 45 days ready at mil also according to the actual weight; 2) Minium order: 15 Ton/Dimension while not stock raw material; 4) Term of payment: T/T or L/C at sight; 5) Delivery Port: Shanghai Port; 6) Offer Validity: 7 Days; 7) Container: 20GP or 40GP or Bulk; 8) Manufacture methods: ERW method.
Main features 1.Gluing part adopts special relocation mechanism, ensure the gluing nozzle will touch IG unit closely, but will not break it. And it can adapt to a certain range of displacement error of IG unit. 2.Sealing width is adjustable by inputting parameter, convenient and accurate. Sealing depth can be detected automatically. The sealing speed is controlled by sealing depth and gluing quantity, ensures the sealing quality. Adding glue on the IG unit corner, ensures the sealing quantity on the corner. 3.All important electric elements, adopt imported famous brand products, such as Servo motor, controller, low-voltage apparatus, sensors, fiber optic photo switches and so on. Which will make sure the equipment runs well, reliable and long service life. 4.Sucker, reducer, rails, sliders and other key moving parts are adopted from foreign brand, to ensure a smooth transfer of glass, safe and reliable. 5.Hydraulic glue, through pressure on the hydraulic station to meet the quantitative oil supply of the driving oil cylinder, so as to control the white glue for quantitative glue. And ensure the black glue quantitative glue through the mechanical linkage adjustment ratio. It is easy to use, simple and reliable. 6.ZDJ-18V Automatic sealing robot adopts the combination transfer mode of a synchronous belt and a unique V block, smooth transmission, accurate positioning, less glue leakage, IG unit edge clean. 7.Adopts Touch screen man-machine interface, graphic combination, convenient to understand and easy to operate. 8.Automatic digital control system by servo motor ensures the equipment precision and glue precision. The system also has a unilateral sealing, alarming, dangerous to be automatic determination and lock function. 9.This equipment can work alone, or equipped with IG unit production line. The later condition can develop more efficiency. 10.This robot adopts high quality Aosong board through the NC machining and wheel combination, beautiful and durable. 11. By optimizing the structure, this robot achieves low power consumption and high efficiency. Sealing speed (m/min)5-35 Sealing depth (mm)18 Thickness of IG unit (mm)12-50 Min. IG unit size (mm)350*200 Max. IG unit size (mm)2500*1800 Glue supply pressure (MPa)30MPa Elevation400mm (Standard height) Angle of inclination6° Air pressure (MPa)0.6-0.8 Total power (Kw)9.4 Max weight of IG unit200Kg Outline Dimension (L*W*H)6830*3500*2500mm
Main features 1.Gluing part adopts special relocation mechanism, ensure the gluing nozzle will touch IG unit closely, but will not break it. And it can adapt to a certain range of displacement error of IG unit. 2.Sealing width is adjustable by inputting parameter, convenient and accurate. Sealing depth can be detected automatically. The sealing speed is controlled by sealing depth and gluing quantity, ensures the sealing quality. Adding glue on the IG unit corner, ensures the sealing quantity on the corner. 3.All important electric elements, adopt imported famous brand products, such as Servo motor, controller, low-voltage apparatus, sensors, fiber optic photo switches and so on. Which will make sure the equipment runs well, reliable and long service life. 4.Sucker, reducer, rails, sliders and other key moving parts are adopted from foreign brand, to ensure a smooth transfer of glass, safe and reliable. 5.Hydraulic glue, through pressure on the hydraulic station to meet the quantitative oil supply of the driving oil cylinder, so as to control the white glue for quantitative glue. And ensure the black glue quantitative glue through the mechanical linkage adjustment ratio. It is easy to use, simple and reliable. 6.ZDJ-18V Automatic sealing robot adopts the combination transfer mode of a synchronous belt and a unique V block, smooth transmission, accurate positioning, less glue leakage, IG unit edge clean. 7.Adopts Touch screen man-machine interface, graphic combination, convenient to understand and easy to operate. 8.Automatic digital control system by servo motor ensures the equipment precision and glue precision. The system also has a unilateral sealing, alarming, dangerous to be automatic determination and lock function. 9.This equipment can work alone, or equipped with IG unit production line. The later condition can develop more efficiency. 10.This robot adopts high quality Aosong board through the NC machining and wheel combination, beautiful and durable. 11. By optimizing the structure, this robot achieves low power consumption and high efficiency. Sealing speed (m/min)5-35 Sealing depth (mm)18 Thickness of IG unit (mm)12-50 Min. IG unit size (mm)350*200 Max. IG unit size (mm)2500*1800 Glue supply pressure (MPa)30MPa Elevation400mm (Standard height) Angle of inclination6° Air pressure (MPa)0.6-0.8 Total power (Kw)9.4 Max weight of IG unit200Kg Outline Dimension (L*W*H)6830*3500*2500mm
Main features 1.Gluing part adopts special relocation mechanism, ensure the gluing nozzle will touch IG unit closely, but will not break it. And it can adapt to a certain range of displacement error of IG unit. 2.Sealing width is adjustable by inputting parameter, convenient and accurate. Sealing depth can be detected automatically. The sealing speed is controlled by sealing depth and gluing quantity, ensures the sealing quality. Adding glue on the IG unit corner, ensures the sealing quantity on the corner. 3.All important electric elements, adopt imported famous brand products, such as Servo motor, controller, low-voltage apparatus, sensors, fiber optic photo switches and so on. Which will make sure the equipment runs well, reliable and long service life. 4.Sucker, reducer, rails, sliders and other key moving parts are adopted from foreign brand, to ensure a smooth transfer of glass, safe and reliable. 5.Hydraulic glue, through pressure on the hydraulic station to meet the quantitative oil supply of the driving oil cylinder, so as to control the white glue for quantitative glue. And ensure the black glue quantitative glue through the mechanical linkage adjustment ratio. It is easy to use, simple and reliable. 6.ZDJ-18V Automatic sealing robot adopts the combination transfer mode of a synchronous belt and a unique V block, smooth transmission, accurate positioning, less glue leakage, IG unit edge clean. 7.Adopts Touch screen man-machine interface, graphic combination, convenient to understand and easy to operate. 8.Automatic digital control system by servo motor ensures the equipment precision and glue precision. The system also has a unilateral sealing, alarming, dangerous to be automatic determination and lock function. 9.This equipment can work alone, or equipped with IG unit production line. The later condition can develop more efficiency. 10.This robot adopts high quality Aosong board through the NC machining and wheel combination, beautiful and durable. 11. By optimizing the structure, this robot achieves low power consumption and high efficiency. Sealing speed (m/min)5-35 Sealing depth (mm)18 Thickness of IG unit (mm)12-50 Min. IG unit size (mm)350*200 Max. IG unit size (mm)2500*1800 Glue supply pressure (MPa)30MPa Elevation400mm (Standard height) Angle of inclination6° Air pressure (MPa)0.6-0.8 Total power (Kw)9.4 Max weight of IG unit200Kg Outline Dimension (L*W*H)6830*3500*2500mm
QR Code PCB Laser Marking Machine PCB-0909 Laser Marking Machine Usage PCB inline QR code laser marking machines are mainly used for automatic engraving QR code on PCB surface (different model according to PCB's size ), available on white oil, green oil, black oil and other inks and copper surface . It can automatically engrave QR code of raw materials procurement, production process, batch, manufacturer, date , and destination for trace ability and management. Feature 1, Imported CO2 laser, fiber laser, green laser, UV laser, stability performance. 2, Imported high speed vibrating mirror, high processing precision and marking speed, stable performance. 3, Easy to use software interface , easy to learn. 4,Automatically obtain the work order, product batch number, material name encoding, specifications and other information and automatic marking. 5, Automatically read and save the QR code, record and alarm if not available. 6, Automatic feeding m achines can be customized. 7,Environmental friendly, less consumables,less pollution, free maintenance compared to ordinary jet printing way. Parametres Item Specifications Name Large Panel PCB Automatic Inline QR Code Laser Engraving System Model PCB-0909 Laser type UV lasers, green laser, fiber laser, CO2 laser optional Marking range 100mm�?100mm(standard lens);Max up to 200mm�?200mm (depending on the type of laser, lens) Marking speed 6000 mm/s (for example: white ink, size 3 �?3mm, contains 45-digit 2D bar code,complete in 1 second,the actual processing efficiency depends on the laser type and laser power) Marking position accuracy ±0.08mm (can be customized according to customer requirements) Applicable PCB size Size is less than 800mm�?800mm; Thickness 0.5mm-10mm (can be customized); Application PCB rigid board white ink, green ink, blue ink and other inks; copper (depending on the type of laser) Power demand 220V/50Hz,total power about 3500W One-dimensional code Code 39, Code 25, Code 93,  Code 128, EAN-13, EAN-8, ISBN,etc. 2D dimension code Datamatrix, QR Code, micro QR Code, PDF417,  Code 49, Code 16K ,etc. QR code size 1.5mm�?1.5mm~10mm�?10mm(depends on the laser type) Character types Supports TrueType fonts, single font (JSF), SHX font, bitmap fonts (DMF) Minimum character height 0.1mm ~0.4mm(depending on the laser type) File format DXF, PLT, Excel, TXT file format Automatic positioning Supports automatic photo, 2, 3, 4 points localization way Automatic read code Read qr code automatically and save data, alarm if can't read Intelligent production Can be connected to ERP/MES/SAP system,  automatic access to the order number, product batch number, material code, commodity information etc. and code automatically Loading Automatically loading system can be customized unloading Automatically unloading system can be customized Turnover device Turnover device can be customized Other automatic system Other automatic system of connection to product line
Turmeric powder derived from the rhizomes of the Curcuma longa plant is widely recognized for its numerous health benefits Here is a description of turmeric powders benefits and its potential impact on health Its important to note that the bioavailability of curcumin is relatively low meaning that the body has difficulty absorbing it Pairing turmeric powder with black pepper or consuming it with fats or oils can enhance its absorption Additionally turmeric powder should be used as a supplement to a balanced diet and lifestyle and is not a substitute for medical treatment Consulting with a healthcare professional is recommended for specific health concerns or conditions Precautions needs to be taken while exporting Turmeric Moisture Important to dry the turmeric in hot sun and under expert supervision to zero down the chances of any fungus Cleaning Turmeric Raw fingers directly comes from farmers Need to do manual cleaning to remove foreign particles and then into the machine under experienced person Need to use JuteGunny bags for packing as it gives proper ventilation for turmeric fingerPreferable packing is 25 Kgs Jute bags Polishing has to be neat and avoid breaking of Fingers into pieces Fumigation needs to be done twice when raw material enters into godown and also when it packed and enters into containers Craft paper and Silica gel to be put into the container and keep third party quality specialist to inspect the container health Need to appoint reputed third party quality inspection agent to count the number of bags quality till the time the container is sealed
High Abrasion Cover Hydraulic Hose SAE100 R8 SAE100 R7 thermoplastic hydraulic hose(lines) is suitable for delivering synthetic, petroleum or water-based hydraulic fluids in the working temperature of -40 C to +93 C. Specification: (1)Dash:R8-02 (2)I.D. Inch:1/8 mm:3.3 O.D. mm: 10.2 (3)PSI:5003 SAE100 R8 thermoplastic hydraulic hose is suitable for delivering synthetic, petroleum or water-based hydraulic fluids in the working temperature of -40 C to +93 C. It is non-conductive due to its appropriate materials. It is composed of three parts: tube, reinforcement and cover. The tube is made from high quality oil resistant thermoplastic, making the hose widely used in delivering synthetic, petroleum or water-based hydraulic fluids. The reinforcement is made from suitable synthetic fiber and the cover is made from high quality thermoplastic, which is resistant to weather and hydraulic fluids. Recommended for medium pressure hydraulic lines, lubrication, medium pressure gas, and solvent. Construction and agricultural equipment, agricultural brake systems, forklift trucks, articulating and telescopic booms, aerial platforms, scissor lifts, cranes and general hydraulic use. Internal hose: Polyester elastomer Reinforcement: Two braids of synthetic fiber External covering: Polyurethane, black, pinpricked, white ink-jet branding Applicable specs: Exceeds SAE 100 R7 Recommended fluid: Hydraulic fluid ptroleum based, glicol-water based lubricant Operating temperature range: From -40 C to +100C continuous +70C for water based fluids. Thermoplastic hose is often used as a substitute for a rubber hydraulic hose when you a cleaner working environment is required. Thermoplastic hoses also have non conductive covers that are manufactured with rubber. Sinopulse carries a large selection of high quality thermoplastic hoses that work for a wide range of applications including mobile hydraulic machinery, factory equipment, and more.
