Find Verified Zinc Alloy Casting Suppliers, Manufacturers and Wholesalers

Category:Aluminum alloy casting
Cast aluminu-silicon alloys is a process in which aluminum-silicon alloys are processed into products that can be directly used through a casting process. Common grades are A356.0, A413.0 and so on.
Cast aluminu-silicon alloys is a very important industrial alloy. It has important uses in the automobile manufacturing industry, high-tech electronics industry, aerospace materials and other products, and is an ideal wear-resistant material.
Aluminum silicon alloy may be a reasonably ferroalloy with aluminum and silicon because the main components. Generally, the content of silicon is 11 and atiny low amount of copper, iron and nickel are added to enhance the strength.Aluminum silicon alloy is employed to manufacture low and medium strength castings with complex shapes, like covering, motor shell, bracket, etc. it's also used as brazing solder.
When the silicon content is low (such as 0.7), the ductility of aluminum silicon alloy is sweet, which is usually used as deformation alloy.
When the silicon content is high (such as 7%), the filling property of aluminum silicon alloy melt is nice, which is usually used as casting alloy.
In the Al Si alloy with silicon content exceeding Al Si eutectic point (silicon 12.6%), when the particle content of silicon is as high as 14.5% 25%, adding a specific amount of Ni, Cu, Mg and other elements can improve its comprehensive mechanical .

Nickel-Based Precision Alloy Casting
Category:Nickel alloy casting
Nickel-Based Precision Alloy Casting includes nickel-based soft magnetic alloys, nickel-based precision resistance alloys and nickel-based electrothermal alloys. Common grades are N05500 etc.
Nickel-Based Precision Alloy Casting is commonly used in the electronics industry, resistors and other fields.In recent years, it has been widely used in the field of environmental protection and energy development, improving the comprehensive performance of the devices used.
Nickel-based alloy refers to an alloy with nickel as the basic element and still has high strength and certain oxidation corrosion resistance at high temperature of 650-1000 C. Nickel-based precision alloy is one of them, which includes nickel. Base soft magnetic alloy, nickel base precision resistance alloy, etc.

We offer a wide plethora of Zinc in many forms including LME registered
and non registered Special High Grade Ingots and Jumbos, cathodes,
dust, foil, granules, powder, pieces, anodize activated powder, shot,
and a mossy form.
Zinc is a bluish-white, lustrous metal. It is brittle at ambient temperatures but is
malleable at 100 to 150°C. It is a reasonable conductor of electricity, and burns in air
at high red heat with evolution of white clouds of the oxide. Plating thin layers of zinc
on to iron or steel is known as galvanizing and helps to protect the iron from corrosion.

Medium-strength structural alloy casting
Category:Nickel alloy casting
Nickel-based heat-resistant alloys is a kind of nickel-based alloy, and the common grades are GH738, GH4738 etc.
Product Description
Nickel-based heat-resistant alloys is a nickel-based alloy. There are many different classifications of nickel-based alloy. Heat-resistant alloy is a material that can be used at high temperatures.For example, chemical and chemical equipment in the petrochemical field, atomic power generation in the energy field, comprehensive utilization of coal and other fields.
The main elements of nickel-based heat-resistant alloys are nickel and chromium, and some other elements are also added to improve the solid solution strengthening of the alloy. They can still have high strength and oxidation resistance at high temperatures, and are often used in similar aircraft engines. and other high-temperature parts on the equipment.
Nickel-based alloys can dissolve more elements in them, and can still maintain good organizational stability after dissolving the elements. The representative Incoloy alloy series is resistant to corrosion and creep resistance. It can also be used in Stress cracking is prevented to a certain extent.

Nickel based corrosion resistant alloy casting
Category:Nickel alloy casting
Nickel based corrosion resistant alloy casting, the deoxidation process is strictly controlled during production. Common grades are N08830 etc.Product Description
Nickel based corrosion resistant alloy casting, the material cost is higher, but the corrosion resistance is very good.It has applications in aerospace, petrochemical, machinery, marine, environmental protection, energy, food and other fields.
Nickel-based corrosion-resistant alloy is based on nickel, plus some other elements, so that it can resist corrosion to a certain extent, generally has austenite structure, common nickel-based corrosion-resistant alloys are nickel-copper alloy, nickel-chromium alloy and many more. Commonly there are NS113, NS131, NS141 and other grades.
Nickel-based corrosion-resistant alloys usually need to withstand the corrosion of atmosphere, water vapor, water and other substances, and most of them have austenite structure. According to different elements added, they have targeted resistance to different substances, such as high temperature chlorine resistance. The total of nickel-copper, hydroxide-resistant nickel-chromium alloy, etc.

Cast aluminum-magnesium alloy
Category:Aluminum alloy casting
Cast Aluminum-magnesium alloy are widely used in the fields of electronics, automobiles, and aerospace. Common grades are 7A09 etc.
The main elements of aluminum-magnesium alloy include aluminum and magnesium. The alloy products have high strength, low density and strong heat dissipation capacity, so they are popular in the fields of electronics, automobiles, and aerospace. Common grades are 5052, 5754, 5083, etc. Aluminum alloys have lower cost, superior performance and stronger product competitiveness.
The density of aluminum-magnesium alloy is small, so it is lighter under the same volume, and has a certain strength, which can be used for load-bearing. Aluminum-magnesium alloy has strong heat dissipation, and at the same time, it can resist electromagnetic interference and has strong electromagnetic shielding. Its appearance has a certain degree of beauty, is resistant to corrosion, can maintain a good quality of appearance for a long time, and the material is environmentally friendly, and the waste is recyclable.

Nickel-based shape memory alloy casting
Category:Nickel alloy casting
Nickel-based shape memory alloy casting is mainly used in aerospace and biomedical fields. Common grades are N06600 etc.
Nickel-based shape memory alloy casting usually uses a vacuum induction furnace to smelt the master alloy to ensure the composition and control the gas and impurity content.Shape memory alloys are made of springs and other devices, and can also be used as fire prevention devices. It can also be used in various sensors.
Nickel-based shape memory alloys usually refer to nickel-titanium alloys. By changing the proportion of titanium in the alloy, the recovery temperature of the alloy can be different. Because of the characteristics of shape memory alloys, it is widely used in the fields of aerospace and biomedicine. important role.
Shape memory alloys have a shape memory effect, which can restore the shape before deformation at a specific temperature. At present, it plays an important role in the aerospace field and is used as an interface sealing function in pipeline transportation. In addition, it also plays a role in medicine, and can be used as artificial bones, spectacle frames and so on.

Zinc Alloy Ingots

We are GLOBAL SCRAP SOURCING from Vietnam, since 2009. ZInc Die cast, Load 24 Tons Jumbo Bags in 20ft,90% from cars, 10% from house industry, 2% attachment . contact us for further details.

Raw melting material - aluminum scraps, cans, engine waste etc.
Output capacity - 5-30 tons/h, customized
Automation - Full automatic/ half automatic (based on output requirement and investment budget
Ingot type - ADC12 (7.5kg/ 10kg / customized)

1. After cleaning the oil and grease of waste aluminum, manually put it into the furnace with a forklift;


2. Ignition for melting furnace .Heat up to 680C, and input appropriate proportion of alloy elements. Heat up to 800C, melt and stir evenly, then fetch samples to the spectrometer for testing.

Every lot of production need to do testing .


3. Put A tool that attracts iron into the furnace by forklift, to suck away the iron in the aluminum water.


4. Put the slag agent into Alu liquid to remove the slag. After slag removed , put the slags into Aluminum ash separation machine , and let the aluminum water and ash separate. The proportion of slag agent and aluminum liquid is 1:500


5.Open the drain valve and the aluminum water flows automatically to the ingot production line After the ingot casting is completed, the ingot stacking robot will stack the ingots, which means the production is completed.

Zinc Dross

Zinc Ash

Nickel-based heat-resistant alloys
Category:Nickel alloy casting
Nickel-based heat-resistant alloys is a kind of nickel-based alloy, and the common grades are GH738, GH4738 etc.
Product Description
Nickel-based heat-resistant alloys is a nickel-based alloy. There are many different classifications of nickel-based alloy. Heat-resistant alloy is a material that can be used at high temperatures.For example, chemical and chemical equipment in the petrochemical field, atomic power generation in the energy field, comprehensive utilization of coal and other fields.
The main elements of nickel-based heat-resistant alloys are nickel and chromium, and some other elements are also added to improve the solid solution strengthening of the alloy. They can still have high strength and oxidation resistance at high temperatures, and are often used in similar aircraft engines. and other high-temperature parts on the equipment.
Nickel-based alloys can dissolve more elements in them, and can still maintain good organizational stability after dissolving the elements. The representative Incoloy alloy series is resistant to corrosion and creep resistance. It can also be used in Stress cracking is prevented to a certain extent.

Available Zinc bottom dross in small pieces from pipe fitting galvanizing company.
Quantity available : 100-120mts