ITO GLOBAL GRUOP, Sale Offer Carbon anode FC 90% -96% , clean , containers will be loaded full capacity. Our monthly supplying capacity 1000 ton 1-Carbon-95-97-% 2-Sulphur-0.95-% 3-Ash Content-1-% 4-V-M 0.30-% 5-Moisure 0.90-%
**Ready stock in Turkey** -Price: USD11,000/CIF by air *without compressor -Price: USD12,000/CIF by air *with compressor -Operation Features- Inspiration Pressure: 2-100 mBar Inspiration Duration: 0.1-10 Sec. Peep Pressure: 0-50 mBar Breathe Speed: (c) 1-150/mins. (y) 1-100/mins. Flow: (c) 1-60 lt/mins. (y) 2-120 lt/mins. O2 Mixture: 21-100% Spontaneous Pressure Support: 0-100 mBar I/E Rate: 1:10 (x60*)-10:1 (c): Child, (y): Adult
Good Feeling 2D KF94 Quarantine Mask is a quality product approved by the Korean Ministry of Food and Drug Safety.  Respiratory protection from harmful particulate matter such as yellow dust, fine dust, and infectious sources  1. V-Fit thin face design With thin face visual effect. The inside does not touch the lips for a comfortable fit. 2. High-specification MB filter The Korean-made high-standard MB filter can block more than 94% of particulate harmful substances such as sandstorms, fine dust (PM2.5), and infection sources. 3. High elastic ear straps Use high elastic ear straps for comfortable wearing Mask size (unopened): 13 (w) x 14.5 (h) cm
Soybean Oil" is a vegetable oil that's extracted from the seeds of the soybean plant. Between 2018 and 2019, around 62 million tons (56 million metric tons) of soybean oil were produced around the globe, making it one of the most common cooking oils available. Physical Characteristics Physical State : Liquid Appearance : Light Yellow, Clear and Brilliant Taste : Bland Odor : Bland Color: 5 - 13.5 Yellow / 0.6 - 2.0 Red Quality Standards Free Fatty Acid %: 0.05 - 0.1% Peroxide Value meq/kg: 0.5 - 1.0 meq/kg Refractive Index @ 40oC: 1.4666 - 1.47 Iodine Value (Wijs): 123 - 139 Moisture %: 0.05 - 0.1% Cold Test: 5.5 hrs OSI @ 110oC: 5.5 - 6.0 hrs Saponification Value: 191 - 192 Specific Gravity @ 25oC: 0.915 - 0.925 Smoke Point: 460 - 465oF Flash Point: 650 - 655oF Fire Point: 690 - 695oF Fatty Acid Properties Typical Fatty Acid Profile (major acids) Type Name C14:0 Myristic 0.1% C16:0 Palmitic 8.0 - 14.0 % C16:1 Palmitoleic 0.0 - 0.2% C17:0 Heptadecanoic 0.0 - 0.1% C17:1 9-Heptadecenoic 0.0 - 0.1% C18:0 Stearic 3.0 - 5.0 % C18:1 Oleic 20.0 - 32.0 % C18:2 Linoleic 47.0 - 57.0% C18:3 Linolenic 5.8 - 8.2 % C20:0 Arachidic 0.1 - 0.5% C20:1 Eicosenoic 0.2 - 0.3% C22:0 Behenic 0.2% C24:0 Lignoceric 0.0 - 0.1%
Soybean Oil" is a vegetable oil that's extracted from the seeds of the soybean plant. Between 2018 and 2019, around 62 million tons (56 million metric tons) of soybean oil were produced around the globe, making it one of the most common cooking oils available. Physical Characteristics Physical State : Liquid Appearance : Light Yellow, Clear and Brilliant Taste : Bland Odor : Bland Color: 5 - 13.5 Yellow / 0.6 - 2.0 Red Quality Standards Free Fatty Acid %: 0.05 - 0.1% Peroxide Value meq/kg: 0.5 - 1.0 meq/kg Refractive Index @ 40oC: 1.4666 - 1.47 Iodine Value (Wijs): 123 - 139 Moisture %: 0.05 - 0.1% Cold Test: 5.5 hrs OSI @ 110oC: 5.5 - 6.0 hrs Saponification Value: 191 - 192 Specific Gravity @ 25oC: 0.915 - 0.925 Smoke Point: 460 - 465oF Flash Point: 650 - 655oF Fire Point: 690 - 695oF Fatty Acid Properties Typical Fatty Acid Profile (major acids) Type Name C14:0 Myristic 0.1% C16:0 Palmitic 8.0 - 14.0 % C16:1 Palmitoleic 0.0 - 0.2% C17:0 Heptadecanoic 0.0 - 0.1% C17:1 9-Heptadecenoic 0.0 - 0.1% C18:0 Stearic 3.0 - 5.0 % C18:1 Oleic 20.0 - 32.0 % C18:2 Linoleic 47.0 - 57.0% C18:3 Linolenic 5.8 - 8.2 % C20:0 Arachidic 0.1 - 0.5% C20:1 Eicosenoic 0.2 - 0.3% C22:0 Behenic 0.2% C24:0 Lignoceric 0.0 - 0.1%
Pale yellow liquid at room temperature characteristic odor and taste or nearly odorless, free from rancidity or any objectionable odor and taste. Each batch of materials shall undergo strict sampling,inspection and screening for guaranteeing the affluent oil production and the excellent oil fragrance. Groundnut OIL Taste Neutral Impurities Negative Free Fatty Acid ( % ) max 0,10 Moisture ( % ) max 0,05 Peroxide Value ( meq O2/ kg ) max 5 Specific gravity at 20 degr C 0,91 - 0,93 Iodine value ( g / 100 g ) 82 - 110 Colour Lovibond 5 1/4 " Red max 2,5 Colour Lovibond 5 1/4 " Yellow max 25 C 12:0 C 14:0 (Myristic Acid) C 16:0 ( Palmitic Acid ) 6 - 14 C16:1 (Palmitoleic Acid) C 18:0 ( Stearic Acid ) 1 - 5 C 18:1 ( Oleic Acid ) 35 - 72 C 18:2 ( Linoleic Acid ) 13 - 44 C 18:3 ( Linolenic Acid )
Copra We make high-quality copra by drying fresh coconut meat (kernel) in hybrid solar dryers. With efficient and continuous drying technology, we can reduce the moisture content of fresh coconut kernels from around 50% to lower than 6% within 48 hours. This result can be achieved by utilizing solar energy during daylight and renewable energy from smokeless biomass burning all night long. Moisture content: maximum 6%, Free Fatty Acid content: maximum 0.5%, Green: 0%, Burnt: maximum 2%, Smoky: maximum 5%, Rubbery: maximum 5% We only pick mature coconut fruits for the drying process, coconut must be put in a dryer immediately after opening to prevent microbes such as fungus, mold, and bacteria to grow. We keep the temperature in the oven dryer between 60 to 70 degrees Celsius. We inspect the copra periodically during the drying process, any damaged copra should be removed from the oven dryer immediately.
Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor
Stick ice lollipop ice filling sealing machine The automatic stick ice filling -sealing machine for lollipop ice is small in size and light in weight, and is made of stainless steel. This machine can produce various beverages such as lollipop ice, milk sticks, fruit milk, fruit cold drinks, and so on. from small capacity to big capacity . Product parameters of one : Voltage: 220/50 (V/Hz) Power: 0.75KW Sealing speed: 2000 cups/hour Filling capacity 0-150ml Specification: 960 * 430 * 330mm (Welcome give thumbs-up, comment,transmit) welcome order !
PPE material (called Polyphenylene Ether). PPE resin, exhibits low moisture absorption due to its inherent composition. Therefore, good electrical insulation properties will be achieved under temperature and humidity conditions. Chemical reaction from water, most salts, acids and bases is also minimal with PPE material. MATERIAL: PPE regrind black CATEGORY: PPE TYPE: regrind GRADE: black SPECIFICATION: Grade V-0, engineering plastic Origin: Japan LOADING WEIGHT: 25 Ton FOB (USD/Ton): 900$ - 1000$ Packaging: Jumbo Bag Est. Shipping Time: 15, 30, 45 days PPE Plastic Provides: Good electrical insulation properties Long term dimensional stability Outstanding impact resistance Light-weight Heat resistance Good hydrolysis stability
Yamaha introduced its sporty 150cc naked motorcycle, the FZ, back in 2008. It was soon followed by the semi-faired Fazer in 2009. Now that the FZ Version 2.0 is here and doing well in the market, the Japanese motorcycle brand has introduced the Fazer. As before, the Fazer mechanically remains identical to the new FZ and the FZ-S. Like the new FZ range, the Fazer Version 2.0 is offered with a new 149cc, 4-stroke, single-cylinder engine. The highlighting upgrade here is the fact this engine now comes with fuel injection for better refinement and throttle response. Cosmetically, the Fazer continues with its semi-fairing and twin headlights at the front, which sets it apart from the FZ and FZ-S. The new 149cc, air-cooled engine develops 12.9bhp and 12.8Nm of torque through a five-speed gearbox. Despite being less powerful than the carburetted version, the new fuel-injected Fazer offers better performance and efficiency than the old model. The front gets conventional telescopic suspension and a monoshock with a swingarm at the rear. Stopping power is courtesy a disc brake in the front and drum brake at the rear
Features : No speckle, no mould, No sudan red 1,2,3&4. No heavy metal, no pesticide, Hand selected Color: Brown Odour: Characteristic Size: Homogenous Foreign matter 0% Stems: 2. 09% Inferior cloves: 2. 25% Admixture: 1% Moisture: 6% - 12% Volatile Oil Content: 65- 70% (v/w)
Features : No speckle, no mould, No sudan red 1,2,3&4. No heavy metal, no pesticide, Hand selected Color: Brown Odour: Characteristic Size: Homogenous Foreign matter 0% Stems: 2. 09% Inferior cloves: 2. 25% Admixture: 1% Moisture: 6% - 12% Volatile Oil Content: 65- 70% (v/w)
The original uplifting thirst quencher bursting with bubbles Boldy refreshing taste with 0 calories, 0 sweeteners Available in a range of invigorating, fruity flavors The perfect mixer for delicious cocktails and mocktails Enjoy epic refreshment on the go with a 16.9 Fl. Oz. bottle 33.8 ounce/1 Liter plastic bottle: fits easily in your refrigerator, chilled and ready to enjoy This 12 pack is perfect for at home entertaining, enjoyed on its own or mixed with cocktails Our invigorating bubbles and naturally occurring minerals make for a unique, thirst quenching taste Zero calories and zero sweeteners Perfect for any time of day, and serves as an extraordinary mixer for cocktails Original Unflavored | Perrier Carbonated Mineral Water
Natural, Blanched or Roasted Hazelnut kernels grinded into powder form with 4-6% humidity. Usage : Bakery, chocolate, ice cream,biscuits, wafers Size: 0-1.5 mm, 0-2 mm, 0-3 mm Packaging: 10, 25 kg vacuum bags in cartons.
1,Hight prurity (99.99% min) Metal Antimony (Sb) 2,4N>99.99%, 5N>99.999%, 6N>99.9999%, 7N>99.99999% 3,Lumps/Ingot/Granule/Bar 4,Color: Gray 5,Atomic weight: 121.760 6,Electronegativity: 2.05 7,CAS No.: 7440-36-0 8,Density: 6.697 g/cm3 (25â??) 9,Melting Point: 630.63 â?? 10,Boiling Point: 1587 â?? 11,Mainly used for the preparation of â?¢ - V compound semiconductor InSb, Bi2Sb, GaSb, high purity alloys, electronic refrigeration element materials and germanium, silicon single crystal dopants.
No mineral oils or any chemical in the shea butter Fatty acid composition (in %) : Norms C16:0 palmitic 4.0 - 8.0 C18:0 stearic 36.0 - 50.0 C18:1 oleic 40.0 - 50.0 C18:2 linoleic 4.0 - 8.0
No mineral oils or any chemical in the shea butter Fatty acid composition (in %) : Norms C16:0 palmitic 4.0 - 8.0 C18:0 stearic 36.0 - 50.0 C18:1 oleic 40.0 - 50.0 C18:2 linoleic 4.0 - 8.0
Moisture (V/W): 12% max. Broken /Split / Insect Infested: 2-2.5% max. Aborted / Green / Brown Seeds: 1-6.5% max. Stained Seeds: 0.5 - 6.5% max. Smooth Seeds: 0.5 - 6.5% max. Extra. Foreign matter (by weight): 0.2% max. Weevil Damage: Nil Total Defects (by weight): 4.2 - 9.2% max
Ingredient - 100% pineapple Moisture - 0% 1.Nutrient retention reach more than 90% 2.Instead of fresh fruit for your trip 3.No additivies, no preservatives
