FH SERIES OF PRODUCTS: FH products are Pure nonionic derived the endosperm of guar polysaccharide (Cyamopsos tetragonolobus). The products are unique with ultra-high viscosity with fastest hydration characteristics as shown in Figure 1 below. Also, when added with other drilling components, to seawater, a KCl solution or other aqueous system, the product suspension disperses readily without lumping, even under low-shear conditions generating most of its full viscosity within just a few minutes. PRODUCT COMPATIBILITY: FH series of products are compatible with most of the chemicals and auxiliaries used in drilling operations. However, the products are not compatible with Arabic and Crystal gums. Also, in presence of borates they form elastic gel. PRODUCT APPLICATIONS: FH series of products are natural, high viscosity, fast hydrating non-Newtonian hydrocolloids with suitable cross linking components in diesel slurries and are versatile for continuous mix applications, where extremely fast hydration and subsequent viscosity development is required. They are excellent viscosifiers, stabilizers, thickeners and suspending agent for use in oil-drilling, workover fluids and several other oilfield applications like hydraulic fracturing, oil well stimulation, mud drilling, oil well capping, flocculent and liquid shoring etc. The product is used as a surfactant; synthetic polymer and deformer ideally suited for all rheological requirements of water based and brine based drilling fluids. Specifications:- PRODUCT : FH-35 FH-38 FH-42 CAS No. : 9000-30-0 9000-30-0 9000-30-0 Granulation : FINE FINE FINE APPEARANCE : OFF WHITE POWDER MOISTURE : 8% Max. 8% Max. 8% Max. PROTEIN (N X 6.25) : 5.0% Max 5.0% Max 5.0% Max ASH : 1.5% Max. 1.5% Max. 1.5% Max. ACID INSOLUBLE RESIDUE (A.I.R.) : 3% Max. 3% Max. 3% Max. CARBOHYDRATE (incl gum by difference) : 82% Min 82% Min 82% Min pH (1% Solution) : 5.5 ? 6.5 5.5 ? 6.5 5.5 ? 6.5 VISCOSITY : (0.48% Product in 2% KCL Sol. 2.5 mins mix @1500 RPM in waring blender) Fann 35sa Viscometer at 300 RPM, 25�C 3 Mins : 35 3 Min:38 3 Mins : 42 5 Mins : 37 5 Mins : 39 5 Mins : 43 30 Mins : 39 30 Mins : 42 30 Mins : 45 60 Mins : 40 60 Mins : 43 60 Mins : 47
**Ready stock in Turkey** -Price: USD11,000/CIF by air *without compressor -Price: USD12,000/CIF by air *with compressor -Operation Features- Inspiration Pressure: 2-100 mBar Inspiration Duration: 0.1-10 Sec. Peep Pressure: 0-50 mBar Breathe Speed: (c) 1-150/mins. (y) 1-100/mins. Flow: (c) 1-60 lt/mins. (y) 2-120 lt/mins. O2 Mixture: 21-100% Spontaneous Pressure Support: 0-100 mBar I/E Rate: 1:10 (x60*)-10:1 (c): Child, (y): Adult
Ramming mass is commonly used in metallurgy, building materials, non-ferrous metal smelting, chemical, machinery and other manufacturing industries. Ramming mass is widely used in non-core intermediate frequency furnace and core induction furnace. As an intermediate frequency furnace ramming material, refractory ramming is applied to melt gray cast iron, nodular cast iron, malleable cast iron, vermicular cast iron, and cast alloy steel; to melt carbon steel, alloy steel, high manganese steel, tool steel, heat resistant steel, stainless steel, molten aluminum and its alloys; to melt red copper, brass, white brass, bronze and its alloys, etc. Induction furnaces are used for melting cast iron, mild steel and various alloy steels in foundries and making of steel in mini steel plants using sponge iron The refined high silicon, low iron quartz sand and quartz powder are selected and the fused quartz sand is added as the refractory material., with no slag, no crack, damp proof, convenience of repair, and the corrosion resistance, thus greatly improving the furnace service life span and the economic benefit.. Silica ramming mass can safely be used up to an operating temperature of 1600 deg C. Since it expands very little, it is superior to both alumina and magnesia refractories to resist thermal shocks Acid ramming material is the premixed ramming mass of the lining material. The acid ramming mass is used to smelt a series of metal materials such as ordinary steel and carbon steel. The lining practice best suited to a particular furnace depends upon the capacity and design of the furnace, operation practice adopted during making of a heat, and furnace output.
Induction Motor (b-5 Flange Mounted)
Battery capacity: 1800mah Product size: 77*51*91mm Induction distance: â?¤12CM Working current: 500mA Working frequency: 108KHz Bottle Capacity: 45ml Colour: Black / White Accessories Included 2X - Filter Pads 1X - C Charging Cable 75% alcohol is recommended
Mixed Electric Motors Scrap Electric Motors and Alternators Scraps in Bulk Top Quality Mixed Electric Motor Scrap at Affordable Prices Buy electric motor scraps scrap electric motors Electric motor scrap Mixed Electric Motors Scrap Electric Motors and Alternators Scraps in Bulk Top Quality Mixed Electric Motor Scrap at cheap price electric moto scrap for sale electric motor scrap Dear buyers here are a list of our product which we supply Electric Motor Scrap,AC fridge compressor scrap,Alternator Scrap,Starters scrap with 100% copper wind.We collect locally from our small We are trading in the finest quality Metal Scrap/ Aluminum Scrap, which are recycled for producing pure copper products and equipment. Our Company is a prestigious company with a good reputation to suite all customer`s across the world and we look forward to providing good quality products and we will offer at very good price as our prices are 100% NEGOTIABLE. Operating conditions: Ambient temperature: -15?C
We KAPADIYA EXPO COMPANY like to offer our clients an extensive array of Fresh Mango, Mango slices, Mango pulp & Mango juice, that is highly appreciated in the market for its quality and taste. Our clients can avail from us an excellent quality of Mangoes. Keeping in mind the varied needs of our clients, we offer an entire range of different packaging options at affordable prices. Our quality examiners execute a series of tests on different parameters, to ensure the quality of the entire array. It has a rich flavor, is hygienically processed & Long shelf life. mangoes are used for the production of jams, marmalades, jelly, sweets, drinks, and fillings of baked goods. It is used in various dishes as a flavoring agent. The mango is tasty, healthy, and flavorsome. Mangoes are rich in boasting high levels of vitamins a, c, and e, soluble fiber, pectin, and unique flavonoids such as mangiferin. mangoes are among the most widely consumed fruits in the world. We provide the Indian best types of mangoes like ALPHONSO'S, KESAR, TOTAPURI, BADAMI, and many more Health Benefits of Mangoes: Mangoes contain many VITAMINS, it is gives ENERGY, SUGAR, PROTEIN & WATER to our body. Mango is high in nutrients â?? particularly VITAMIN C, which aids immunity, and iron absorption. This fruit is not only delicious but also boasts an impressive nutritional profile. Mango is a good source of folate, several vitamins B, as well as VITAMINS A, C, K & E, all of which help boost immunity. Mango contains magnesium, potassium, and the antioxidant MANGIFERIN, which all support healthy heart function
1) Series motor is totally enclosed and fan cooling three-shape squirrel cage induction motors. It is designed and produced in conformity with th Y e relevant standards of IEC. 2) Y series motors have outstanding performance, such as wonderful appearance, small size, light weight, high efficiency, less consumption, high starting torque, low noise, little vibration, reliable operation, and easy maintenance. 3) Y series motors apply to many kinds of no special driving requests mechanical equipment, such as machine tool, pumps, fans, transport machines, mixers, agriculture machines and food machine. 4) This series of motors also can be made of different voltage, frequency and so on according to your special requirements.
Tripowmotor Model Number Y80M-Y315L Type Asynchronous Motor Frequency 50Hz or 60Hz Output Power 0.37-315KW Protect Feature IP54 OR IP55 Phase Three-phase Certification CCC, CE AC Voltage 180V-690V Y series motor is commonly applied in machinery and equipment without special requirements, such as agriculture machinery, food machinery, fan, agitator and air compressor etc With IP54protction, class F inslution. With IC411cooling. 80-315 mounting type:B3,B5,B35 and V1.
Ycl series single-phase heavy-duty capacitor started asynchronous motor is suitable for driving small lathe and water pump, especially good for families and workshops where only single-phase power is available.These series motors are designed with advanced technique and made of fine materials.It also has many other characteristics such as nice function, lower noise, lower temperature-rise and starting current, higher starting torque, reliable operation, easy maintenance and nice appearance.The ycl series motor is produced in conformity with iec standard. The ycl series motor is similar to yc series in appearance.Compared with yc series motor of same output the termal rise and starting current of ycl series motor on the average are reduced by 8.74k and 18.1a respectively, in the average, the efficiency go up by 4.21 percent, max-torque increase by 0.064, min-torque by 0.408, starting torque by 0.348 and power factor by 0.16.
Type:Steel Coil, Hot-Galvanized Steel Sheet, Color Coated Steel Sheet, C Surface Treatment:BA/2B/NO.1/NO.3/NO.4/8K/HL/2D/1D Package:Standard Sea Worthy Package or as customer's requirement Keyword:cold rolled coil Payment:D/P,L/C,TT,D/P,D/A Usage:Architectural decoration, luxury doors, elevators decorating,ect Grade:200 400 series MOQ:25 Tons Special Use:Silicon Steel Surface structure:zero spangle / minimized spangle / regular spangle/ big spang Type:Steel Coil Standard:AiSi Width:1251-1500mm Certificate:API Certificate:ce Certificate:SNI Certificate:SASO Certificate:SABS Surface Treatment:Normal Oiled Hardness:Full Hard Tolerance:�?�±1% Processing Service:Welding Processing Service:Punching Processing Service:Cutting Processing Service:Bending Processing Service:Decoiling Processing Service:Annealed Processing Service:Black Annealed Skin Pass:Yes Oiled or Non-oiled:Slightly Oiled Alloy Or Not:Non-Alloy Delivery Time:within 7 days Place of Origin:CN;JIA Application:High-strength Steel Plate Thickness:0.5mm~3.0mm Length:1000-12000(requirment) Grade:steel
Leading electric motors manufacturer in china. Supply ac three-phase induction motors, wound rotor and synchronous motors, capacity from 220kw up to 30, 000kw. Packed in wooden case
Y, y2 three phase induction motor The structure of completeclosed, self-cooling fan and squirrel cage typed is suitable for the usage under bad environment.
Y series motor is a kind of low-voltage three phase asynchronous motor, which is a basic series for general applications. This series can meet requirements for general application international standard with frame range 80-135. Y series has the advantages of high efficiency, energy saving, high operational performance, small vibration, low noise, long life, high reliability, etc. Installation dimension and power grade completely conform to IEC standard. It employs Grade B insulation, IP44 grade for shell protection and IC411 cooling mode. The rated voltage and frequency of Y series are 380V, 400V, 415V, 440V, and 50Hz, 60Hz. Y series asynchronous motor is widely applied for machinery and equipments without special requirements, such as agricultural machinery, food machinery, fan, agitator and air compressor, etc. For more information, please be free to conact us for detailed PDF files. Standard package.
I am Havi, Sales Staff of November CO.LTD .November company - one of the largest exporters in Vietnam. We are now supplying very product coconut as : coconut young, coconut Huske, desiccated coconut, coconut fiberâ?¦ We are aimed at giving you the best cost efficient deals year round and taking into consideration that our company motor is base on clients satisfaction and we promise to offer you the best of services. Our prices and quotation are as below; We can supply you with good quality and quantity desiccated coconut process with below specification: Commodity: Low fat and high fat Fat content : 25 â?? 35 % for Low fat 60 â?? 65 % for high fat Moisture : 5 % max FFA : 0.3 % Grade : fine grade, medium grade Quantity: 40 HC : 14 MTS Package: 25 Kgs / Bag Port Of Loading: Ho chi minh city , Vietnam. MOQ: 1*40 HC Samples: Our samples are free of charge but clients take care of the freight charges either through their account with any freight company or clients will contact the freight agency to pick up samples in our office. Payment: By L/C at sight or T/T 30 / 70% after scan documents Inspection: Inspection of goods shall be done at port of loading prior to loading at sellers cost by sgs or any of its equivalence and at destination port at buyers cost if he still needs another inspection. We have Certificate of HACCP, ISO, HALAL Origin.. etc
Type: Outboard Motor Year: Current Model: F40 HP Jet Drive Model Number: F40JEHA Series: Four Stroke Jet Drive HP: 40 Engine Type: 3 Cylinder Displacement: 45.6 ci (747 cc) Borex Stroke: 65 x 75 mm (2.56 x 2.95in) Prop Shaft Horsepower: 30 @ 5500 RPM Compression Ratio: 9.4 RPM Range: 5000-6000 Fuel Induction System: EFI (SOHC) Fuel Type: Unleaded gasoline (minimum pump octane 87) Exhaust: Thru prop Ignition System: TCI Microcomputer CARB Rating: 3-Star Alternator Outputat WOT: 16A Starting System: Electric Lubrication: Wet Sump Oil Capacity: 2.1 quarts Recommended Engine Oil: Yamalube 4M Gear Ratio: Direct Drive Control Type: Tiller Handle Trolling Throttle Adjustment: N/A Cooling: Water, Thermostatic Control Gear Shift: F-N-R Command Link System: No Enhanced Ultimate Corrosion Protection System UCP: Standard Feature Power Trim and Tilt: No Shaft Length: 20 inch Gearcase Rotation: Jet Drive Propeller: Jet Drive Tiller Handle Kit: Optional Freshwater Flush: Yes
Basalt Fiber Series Fabric 1. Production: basalt fiber fabric is made of continuous basalt fiber textile yarn through warping, weaving and coating. 2. Weaving methods according to requirements: unidirectional cloth, plain cloth, twill cloth and grid cloth. 2. Application: reinforced mesh cloth, fireproof cloth, fishing rod cloth, luggage decoration cloth, electrical insulation cloth, bulletproof cloth, etc. 3. Packaging: 100M / roll (or customized as required). 4. Performance: high strength, high temperature resistance, good electrical insulation, non hygroscopic, acid and alkali corrosion resistance.High temperature resistance 1000 �° C 5. Specification and model: bfw16 * 20-100 (120) BFW: basalt fiber fabric;Completely replace carbon fiber sheet building reinforcement 16 * 20: the warp and weft density of yarn is 16 and 20 pieces / cm respectively; 100: the width of the fabric is 100 cm; (120): the mass per unit area of fabric is 120 g / m2. BFNP5*5-200(160) BFNP: basalt fiber mesh cloth (coated and shaped); 5 * 5: the longitude and latitude mesh size of the cloth surface is 5 and 5mm; 200: the width of the grid is 200 cm; (160): the weight of grid cloth per unit area is 160g / m2.
Cooper & Hunter 18,000 BTU Olivia Midnight Series Mini Split A/C and Heater Brand: Cooper & Hunter Refund/Replacement: 30-day refund/replacement policy Size: Dual Zone (12,000 + 12,000 BTU) Product Specifications: Capacity: 1.5 Tons Cooling Power: 18,000 BTU Seasonal Energy Efficiency Ratio (SEER): 22.9 Special Features: Inverter compressor, remote control, WiFi enabled, heating and cooling function, dehumidifier Product Dimensions: 48" D x 40" W x 40" H Energy Star Rated: Yes Color: Mirror Black Voltage: 230 Volts Noise Level: 24 dB Included: Installation Kits: Comes with 25 ft installation kits !!!!!!!!PLEASE SEND YOUR INQUIRY FOR OUR BEST PRICES!!!! WHOLESALE!!!!
Huamotor.Com standard efficiency:ie1. Y3 series three-phase induction electric motor utilize cold rolled silicon steel, which is popular in the internationa motor field, are Defined as totally enclosed, fan cooled, squirrel conge type and have good features such as novel design, beautiful model, efficiency which reaches eff2 in europe, low noise, large torque, excellent staring performance, compact structure, easy serving and etc. Y3 series three-phase induction electric motor can be widely used as driving equipments of various machineries, such as machine tools, blowers, pumps, reducers, compressors, transporters, agricultural and processing and packing and other industries. Insulation class:f Ambient temperature: -15¡æ to 40¡æ Altitude: not exceeding 1000meters above sea level. Wooden packing
Brief description: Application: Ms series three phase induction motors are newly designed based on series y motor and generaly purpose low voltage three phase induction motors of basic series. As compared with series y series, the ms series motors feature are high efficiency and starting torque. Ms series are generally purpose motors suitable for common working environment and machinery without special requirement, like air-compressor, pump, fan, medical apparatus and instruments, small machines etc. Ms motor can be equipped with ptc. Willda brief introduction: Willda factory is the professional ac motor manufacturer and exporter, Single phase: mc/ml/ my/yc/yl series Three phase: aeef/y/y2/ms/russia gost series. If you are interested in it, welcome to email us or call us freely. I) 112 frame or below: packed by carton firstly, then packed by plywood pallet together Ii) 132 frame or above: packed by plywood/wooden pallet seperately
