Work Stool Task Chair Thick Sponge Seat Suppliers and Manufacturers

#Rattan_chair_Vietnam Our Office/Dining Chair Pierre is a stylish and comfortable piece of furniture. Made of natural materials and featuring decorative Viennese braid, it is consistent with the latest interior trends. It can be a beautiful decoration in modern or traditional spaces. It's perfect for the dining room, as well as for use as a comfortable work seat at a desk. Available in brown or black, it is a versatile and functional addition to any space.

#Rattan_chair_Vietnam Our Office/Dining Chair Pierre is a stylish and comfortable piece of furniture. Made of natural materials and featuring decorative Viennese braid, it is consistent with the latest interior trends. It can be a beautiful decoration in modern or traditional spaces. It's perfect for the dining room, as well as for use as a comfortable work seat at a desk. Available in brown or black, it is a versatile and functional addition to any space.

#Rattan_chair_Vietnam Our Office/Dining Chair Pierre is a stylish and comfortable piece of furniture. Made of natural materials and featuring decorative Viennese braid, it is consistent with the latest interior trends. It can be a beautiful decoration in modern or traditional spaces. It's perfect for the dining room, as well as for use as a comfortable work seat at a desk. Available in brown or black, it is a versatile and functional addition to any space.

Our chair cane is most use for the rattan furniture, so the standar of the webbing will be 40 cm/ 45cm /50 cm for the chair seats and the back of the chair. The the big size as 60cm /70cm/ 80cm just for the sofa items. The biggest size as 90cm, 102cm will most use for the rattan project decoration.

Sheet cane is a hand-woven product which is used as seating on some antique and most modern chairs. This type of seating is usually fitted into a continuous narrow groove cut into the top surface of the seat frame and held in place with a cane beading and glue. It is available in the common open weave and in a close weave often originally used on antique American chairs. We offer two widths in the open weave, 18 inch (457mm), and 24 inch (610mm), and 18 inch (457mm) in the close weave. When ordering sheet cane for chair seats you need to provide the dimensions of the seat and an accurate measurement of the width of the groove (in metric to the nearest 0.5mm), so that we can supply the appropriate beading size. Sheet caning instructions and timber wedges used for fitting sheet cane are also available.

Water Hyacinth Woven Ottoman: Bring natural style to any kitchen or room with our Woven Water Hyacinth Ottoman/Stool. With bold, woven seats, they're a comfortable addition to your decor. Material: Water hyacinth and acacia wood Size: Dia 45*35 cm, your request Color: Natural, brown, black, white....we can make at any color you want. Use : For indoor

This material is pre woven and can be used in a number of applications, including some Commercial Projects, but is more commonly used in chair seats and door panels. We stock Open Weave Semi Bleached & Natural Rattan Webbing, Close Knit Weave, Herringbone Weave, & Radio Weave

This material is pre woven and can be used in a number of applications, including some Commercial Projects, but is more commonly used in chair seats and door panels. We stock Open Weave Semi Bleached & Natural â??Rattan Webbing, Close Knit Weave, Herringbone Weave, & Radio Weave

This material is pre woven and can be used in a number of applications, including some Commercial Projects, but is more commonly used in chair seats and door panels. We stock Open Weave Semi Bleached & Natural Rattan Webbing, Close Knit Weave, Herringbone Weave, & Radio Weave

WATER HYACINTH OTTOMAN CHAIR Add a new element of functionality to any living space with this gorgeous woven ottoman. This ottoman is the perfect size to function as a footrest for any accent chair, or can even function as a stand for photo frames, a tray or decorative items. This multi-functional ottoman is also a great easy solution for extra living room seating while guests are over, and can even be used as an end/side table next to a chair or sofa. The gorgeous weave on this ottoman, rich in color and made with the utmost craftsmanship will be a guaranteed stunning addition to any room. With two timeless shape choices, round and square, you are sure to find your perfect fit.

RATTAN PEEL/FOC/RATTAN FLAT/SKIN Style: Bleached/Unbleached/Polished Thickness: 1-2mm Size: 2.5-8mm Uses: In Woven Rattan Webbing Cane, Woven Chairs, Tables, Tie Furniture. Origin: In Vietnam

RATTAN PEEL/FOC/RATTAN FLAT/SKIN Style: Bleached/Unbleached Thickness: 1-2mm Size: 2/3/4/5/6/7/8mm Uses: In Woven Rattan Webbing Cane, Woven Chairs, Tables, Tie Furniture. Origin: In Vietnam

if you want to see more size of plastic chair/bench,pls do feel free let us know

Mini Wheel Chair Application - Medical and Household Seat Back Upholstery - Nylon Push hand - with rubber hand grip and hand brake Warranty - 1 years limited lifetime Custom Services - OEM, ODM, ODM, Customize Brand, Graphic and Packing.

This is chemical setting Furan based chemical resistant mortar which is combination of Liquid and Powder, when mixed in proper proportion from workable mortar which after setting and curing give of liquid and give black highly cross linked composites. Furan When set and cured is resistant to highly corrosive acids, alkalis and to powerful organic solvents such as ketones, Aromatic and Chlorinated solvents. It has extreme resistant to Acidic & alkalis, Salts, Greases and Detergents. It resists to Organic & Inorganic acids at their boiling temperature. It is suitable against mild chlorine Gas (dry) phosphorous trichloride, pyridine at room temperature. Furan is especially useful where resistance to mixed media such as aqueous acids /alkalis and organic solvents is needed in chemical plant process and waste streams. Carbon filled Furan is used against corrosive effect of hydrofluoric acid & its salts. PREPARATION OF FURANE MORTAR : Mortar consist of Furan solution and Furan powder. The average mixing ratio necessary to obtain mortar with good working consistency is 1 part by weight Solution & 3 part by weight powder. The ratio will vary slightly depending on temperature and working conditions.Stir the liquid thoroughly before using. Place liquid in a suitable shallow mixing pan. Add powder by weight in the solution mix thoroughly and rapidly until all lumps are dispersed and the mortar is completely homogenous. Spread out the mortar in a thin layer, not more than ¾ thick, to dissipate the heat of reaction and lengthen the working life. Batch size can be varied depending upon the temperature and the speed with which the masons are working. Very large batches will become stiff quite rapidly. Make sure that all the Furan Motrar is used from the pan before another batch is mixed.When working at temperature above 40 C, very small batches not more than 2 Kgs, should be prepared. When working at temperature below 15C the liquid should be kept warm.

METHOD OF APPICATION: * Mastic compound application consist of two coats of. Primer ,Primer and followed by Mastic compound in recommended thickness, ranging from min. 12mm to 25mm in one or two layers to achieve desired thickness without any pin hole and crack. 1). Surface preparation and application of Primer: Refer application method of Primer. 2). After doing necessary surface preparation and application of primer coating, area to be installed with Mastic compound should be divided in to equal no. bays. To maintain even thickness required, place wooden or aluminum batten. Mastic compound is then broken in small pieces and put it in heating pan. While heating, keep material moving to avoid burning. It is heated until it comes in a uniform consistency and then applied on the surface and works it with wooden float, to achieve uniform thickness and smooth surface free from any pinholes. CHEMICAL RESISTANCE PROPERTIES: * Mastic compound has good resistance to weak, diluted acids, alkalis salts etc. It is not recommended to use against strong acids, oxidizing acid solvents, oil and fats STORAGE & PACKING: * Keep Mastic compound away from direct sunlight, heat solvents etc. Under this condition, its shelf life is unlimited. It is supplied in cake form and approx. wt. is 10 kgs. HEALTH & SAFETY: * Handle melted Mastic compound compound very carefully . Avoid contact with skin. It is advisable to wear protective wears at the time of use of Mastic compound and all other our products. This information, given in good faith, is based on results gained from experience and tests. However, all recommendations or suggestions are made without guarantee since the conditions of use are beyond our control.

Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor

DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.

Wood chairs & stool for Bars, cafes, Restaurant are available to order, various designs and sizes; all modern, vintage, contemporary designs possible. We can provide multiple designs options as all designs are unique or you can also mix varities of furniture like Chairs, Diwans, Sofas, Dining table, Bookshelf Beds, Wood cabinets, Side tables, Wardrobe, Tv unit, Drawers, and much more We can load upto 68 CBM in 1 40' container You can mix products ranging from 100 USD to 5000 USD The average consignment value of 1 container is roughly 15,000-25,000 USD Time to dispatch 30-60 days days from the date of order confirmation.